qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-01 06:59:44 +02:00
Code
23,200 Commits 13 Branches 0 Tags 117 MiB
f3c883c98f
Commit Graph

569 Commits

Author SHA1 Message Date
juhosg
f07500066e ar71xx: allow to disable link polling on unused PHYs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:24 +00:00
juhosg
a17e6cf40e ar71xx: use ap91_pci_init for RB751{,G} 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31356 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:48 +00:00
juhosg
9b7ceff90a ar71xx: move USB device registration directly into rb751{,g}_setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31355 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:43 +00:00
juhosg
e25325e131 ar71xx: add ap9x_pci_get_wmac_data helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31354 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:42 +00:00
juhosg
9ec35a5650 ar71xx: add sanity checks to decode_rle 
Also use -EINVAL instead of -1.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31353 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:40 +00:00
juhosg
87485f3a88 ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD 
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31208 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-06 06:45:07 +00:00
juhosg
7bc411c5d9 ar71xx: boost SPI flash read performance 
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31118 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:17 +00:00
juhosg
32fd04f49a ar71xx: remove the built-in MTD map of the AP96 board 
Pass the mtd_layout via the kernel command line instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31112 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:07 +00:00
juhosg
514a769538 ar71xx: remove the built-in MTD map of the PB92 board 
Pass the mtd_layout via the kernel command line instead

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31111 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:05 +00:00
juhosg
5ca96e340c ar71xx: remove the built-in MTD map of the Zcomax devices 
Pass the mtd_layout via the kernel command line instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:04 +00:00
juhosg
e27017a728 ar71xx: remove the built-in MTD maps of several boards 
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:

 * AP113
 * ALFA N2/N5
 * DIR-600
 * DIR-615
 * DIR-825
 * TEW-6{3,5}2BRP
 * TEW-673GRU
 * WHR-G301N
 * WHR-HP-GN
 * WHR-HP-G300N

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31108 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:01 +00:00
juhosg
70b0829237 ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:37:51 +00:00
juhosg
fd48e871d0 ar71xx: add initial support for RB750GL 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31025 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 15:57:04 +00:00
juhosg
c8aab4b6c2 ar71xx: make rb750_latch_change 'static void' 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31024 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 15:57:03 +00:00
juhosg
58ce76e6b5 ar71xx: add latch_change field to rb750_led_platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31023 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 15:57:01 +00:00
juhosg
e929396e19 ar71xx: add platform data for the RB750 NAND driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31022 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 15:56:59 +00:00
juhosg
1a9e33b337 ar71xx: add AR934x specific interface speed setup for ge0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31017 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 11:11:20 +00:00
juhosg
be8e44bc68 ar71xx: add support for the jjPlus JA76PF2 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30957 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-16 18:00:34 +00:00
juhosg
aaa7c394a3 ar71xx: change LED name prefix on the jjplus boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-16 18:00:26 +00:00
juhosg
f9450e76b1 ar71xx: reset the switch on AR934x before ethernet device registration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-13 17:29:33 +00:00
juhosg
510f76eab5 ar71xx: use a dummy callback for interfaces with fixed speed 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30913 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-12 20:38:58 +00:00
juhosg
710f4ecdd1 ar71xx: merge ar934x_bo_ddr_flush patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30912 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-12 20:38:57 +00:00
juhosg
f69d75cd5e ar71xx: fix WPS button polarity on TL-WR2543N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-07 19:50:53 +00:00
juhosg
d9077e15ae ar71xx: merge files-3.2 to files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30405 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-10 08:19:31 +00:00
juhosg
22b99f32a1 ar71xx: move arch specific files to files-2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29867 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 22:38:11 +00:00
juhosg
3746d2ed29 ar71xx: change board id of the UniFi board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:50 +00:00
juhosg
1b3efb3352 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29713 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 18:00:50 +00:00
juhosg
19be413163 ar71xx: add initial support for the TL-WR2543N/ND board 
The WLAN LEDs are not working yet.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:35 +00:00
juhosg
54bc3d42c4 ar71xx: local mac support on the wndr3700 
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29675 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 17:24:44 +00:00
juhosg
01c809eff1 ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-06 07:20:59 +00:00
juhosg
b8e2e95b70 ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 21:13:54 +00:00
juhosg
86c95a9481 ar71xx: allow to use the command line hack on compex devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29659 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:58 +00:00
juhosg
bf238aa8e9 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:57 +00:00
juhosg
9229d15c65 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:50 +00:00
juhosg
2b1cf2b32c ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:47 +00:00
juhosg
fd1bdc7c45 ar71xx: add support for the ALFA Network N2/N5 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:25 +00:00
juhosg
a604775f66 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:46 +00:00
juhosg
096af0d2e8 ar71xx: fix LEDs on the WRT400N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 13:54:11 +00:00
jow
674429b24f [ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-21 01:27:48 +00:00
nbd
eaf9c95caf ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 09:04:15 +00:00
nbd
cdf64b5cdc ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-18 22:20:17 +00:00
juhosg
12930c3272 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:38 +00:00
juhosg
ba50354437 ar71xx: add defines for the AR934X GMAC interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:36 +00:00
juhosg
a55b188ebe ar71xx: fix GMAC1 interface speed on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:35 +00:00
juhosg
07d1bcb923 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:30 +00:00
juhosg
e61b2d1ed9 ar71xx: allow to attach the internal switch for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:22 +00:00
juhosg
812763d48e ar71xx: introduce ar71xx_switch_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:11 +00:00
juhosg
803afe6e40 ar71xx: fix mac addresses on jjPlus devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:18 +00:00
juhosg
d8f4833329 ar71xx: add support for ALFA Network's Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:10 +00:00
juhosg
33334db9dc ar71xx: add GPIO function bit defines for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:07 +00:00