qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-23 22:34:04 +02:00
Code

Commit Graph

  • 5938c827ed uboot-xburst: update to 2012.10-rc2 master Xiangfu 2012-12-28 09:57:26 +0800
  • 9df13b15a7 xburst: ben nanonote: select ben logo, unset CONFIG_IEEE802154_6LOWPAN, SENSORS_JZ4740 Xiangfu 2012-06-08 10:44:25 +0800
  • 702c3aa9e6 xburst: ben nanonote: add ben boot logo Xiangfu 2012-06-08 10:49:54 +0800
  • 44fed9277b xburst: ben nanonote: add modify keys and fbcon-color patches Xiangfu 2012-12-28 10:29:26 +0800
  • db874d1cb5 xburst: ben nanonote: disable wpan kernel options, should be build as module Xiangfu 2012-06-08 10:36:20 +0800
  • 955fd00bb5 xburst: ben-wpan: add kernel module file. thanks to blogic #qi-hardware @freenode.net Xiangfu Liu 2011-11-06 22:47:41 +0800
  • 05b58eba39 xburst: ben-wpan: fix atusb cannot build as module Xiangfu 2012-06-22 13:06:22 +0800
  • 098317b74e xburst: add ben-wpan support Xiangfu 2012-06-08 10:49:34 +0800
  • 4a16fa46b4 xburst: ben nanonote:: add ks7010 wrieless card support Xiangfu 2012-10-22 22:01:24 +0800
  • 5e4cd88141 kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashes nbd 2012-12-27 22:59:51 +0000
  • 73af5c02d5 brcm47xx: bcma: correct M25P32 serial flash ID hauke 2012-12-27 19:18:40 +0000
  • 0296ef38cb uci: update to latest version (adds list delete support), enable parallel build nbd 2012-12-27 17:37:10 +0000
  • 517ebc0869 ipv6-support: Remove site-border feature * was causing routing problems * will be reimplemented using firewall cyrus 2012-12-27 15:47:53 +0000
  • 195094b016 Remove site-border routing filter due to problems cyrus 2012-12-27 15:47:47 +0000
  • 9b62f5ffba ipv6-support: * Automatically detect and propagate MTU from upstream interfaces * Add site-border feature (RFC 6204, ULA-4) * Fix a typo cyrus 2012-12-27 14:10:17 +0000
  • 49fe1fed52 6distributed: feature update * Add feature to decrease IPv6-specific MTU on-demand * Add commands to enable / disable a site-border cyrus 2012-12-27 14:10:12 +0000
  • 37d0fcb199 6relayd: Advertise IPv6-specific MTU instead of generic * Fixes announced MTU when using tunnels cyrus 2012-12-27 14:10:07 +0000
  • 593cc2f133 base-files: Fix a typo in config_list_foreach cyrus 2012-12-27 14:10:01 +0000
  • 7d9a07b855 mpc83xx: add support for 3.7 juhosg 2012-12-26 10:40:54 +0000
  • 1c7dd15a1f mpc83xx: nuke 3.3 support juhosg 2012-12-26 10:40:51 +0000
  • 44b21b72fa mpc83xx: switch to 3.6.11 juhosg 2012-12-26 10:40:50 +0000
  • 575b583b39 mpc83xx: add support for 3.6 juhosg 2012-12-26 10:40:48 +0000
  • c1f1e7ccd4 mpc83xx: create package for the rbppc_cf module juhosg 2012-12-26 10:40:47 +0000
  • 0714f3921b generic: more missing symbols for 3.{6,7} juhosg 2012-12-26 10:40:41 +0000
  • 2aa10d55c9 ar71xx: build image for the AP136-020 juhosg 2012-12-26 09:50:37 +0000
  • bb447a9202 ar71xx: add user-space support for AP136-020 juhosg 2012-12-26 09:50:36 +0000
  • 215bda85a8 ar71xx: add kernel support for the AP136-020 board juhosg 2012-12-26 09:50:34 +0000
  • 4dc5f1942d ar71xx: rename AP136 to AP136-010 juhosg 2012-12-26 09:50:31 +0000
  • e495dc2e71 ar71xx: dynamically set AR8327's PAD configuration on AP136 juhosg 2012-12-25 18:45:32 +0000
  • a735287d68 generic: ar8216: add sgmii_delay_en field to ar8327_platform_data juhosg 2012-12-25 18:45:31 +0000
  • ffbe131263 ar71xx: ag71xx: show PHY interface mode in dmesg juhosg 2012-12-25 18:45:29 +0000
  • d3ca1d22b3 ramips: fix ASUS WL-330N3G MAC address juhosg 2012-12-24 06:52:41 +0000
  • e6076b9d37 ramips: fix wifi EEPROM extraction on DIR-615-Dx models juhosg 2012-12-24 06:52:38 +0000
  • afc4535cfc base-files: ipcalc.sh: fix broken calculations on 64bit systems jow 2012-12-23 22:18:43 +0000
  • bb460376f5 [cns3xxx]: add nol2x0 cmdline to disable l2x0 cache kaloz 2012-12-23 18:53:38 +0000
  • 40ccb5f49b ipv6-support: Fix default RA settings for dnsmasq cyrus 2012-12-23 18:22:48 +0000
  • 3a230cdbcc busybox: (vconfig) do not attempt to open /proc/net/vlan/config for no good reason (fixes #12663) nbd 2012-12-23 10:59:57 +0000
  • 5123013170 build: reduce the size of package metadata a bit to keep package list files smaller nbd 2012-12-22 19:56:21 +0000
  • 66191d3476 tools/ipkg-utils: remove some unnecessary field checks nbd 2012-12-22 19:56:17 +0000
  • 88281f165d opkg: keep package list files compressed when src/gz is used, reduces tmpfs usage nbd 2012-12-22 19:31:37 +0000
  • b989033b73 build: remove the default useless MAINTAINER value nbd 2012-12-22 18:56:16 +0000
  • f67b960945 dropbear: convert init script to procd nbd 2012-12-22 18:56:13 +0000
  • c0a7004695 base-files: add basic procd integration, let procd start (and restart) ubus instead of having an ubus init script nbd 2012-12-22 18:56:09 +0000
  • 61b2c378ae procd: add initial implementation nbd 2012-12-22 18:56:06 +0000
  • cf8647e803 libnl-tiny: add includedir to pkg-config cflags nbd 2012-12-22 18:56:01 +0000
  • 75683f1fa3 dropbear: use network_get_device instead of scan_interfaces to get the device name nbd 2012-12-22 18:55:57 +0000
  • 7eb00109f8 generic: ar8216: don't use 0 as default VID on AR8327 juhosg 2012-12-22 18:30:04 +0000
  • b84d44e379 generic: more missing symbols for 3.{6,7} juhosg 2012-12-22 17:22:41 +0000
  • 9798fec0b3 ramips: unify eeprom file name for the built-in wireless MAC juhosg 2012-12-22 16:09:03 +0000
  • 4d004cb552 ramips: rt3883: fix build error juhosg 2012-12-22 13:50:47 +0000
  • 9f2f19e97c ipv6-support: Preliminary support for dnsmasq >=2.66 cyrus 2012-12-22 13:00:53 +0000
  • 68f7f699b6 6relayd: Fix detection of prefix changes cyrus 2012-12-22 13:00:49 +0000
  • 25218a4042 odhcp6c: Fix build on arch where char is unsigned cyrus 2012-12-22 13:00:45 +0000
  • 6f8c1d3515 6distributed: Improve prefix deprecation algorithm cyrus 2012-12-22 13:00:40 +0000
  • aa80373147 ar71xx: register the second ethernet interface on the AP136 juhosg 2012-12-22 12:12:50 +0000
  • 5af4f72904 ar71xx: fix ethernet device registration for QCA9558 juhosg 2012-12-22 12:12:48 +0000
  • 6c2c55144e ar71xx: rename QCA9558 ETH_CFG bit defines juhosg 2012-12-22 12:12:46 +0000
  • 0da7fc3cdc ar71xx: fixup allowed PHY interface types for QCA9558 juhosg 2012-12-22 12:12:44 +0000
  • e52fbd2289 ar71xx: don't assign any MII bus device on QCA9558 by default juhosg 2012-12-22 12:12:43 +0000
  • 661316a678 ar71xx: ag71xx: fix mii_bus_dev sanity check juhosg 2012-12-22 12:12:41 +0000
  • 5e4cac78d5 ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev juhosg 2012-12-22 12:12:40 +0000
  • 565673cb04 generic: ar8316: allow to configure port 6 via platform data on AR8327 juhosg 2012-12-22 12:12:37 +0000
  • e1ab1fcace generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data juhosg 2012-12-22 12:12:35 +0000
  • e39812dd92 ramips: add support for 3.7 juhosg 2012-12-22 12:11:13 +0000
  • aaf21b9d13 package/kernel: remove obsolete CONFIG_USB_[EO]HCI_RT3883=y symbols juhosg 2012-12-22 12:11:09 +0000
  • e8e5a1eaf8 ramips: convert to use {e,o}hci-platform driver juhosg 2012-12-22 12:11:08 +0000
  • c4dd6997f2 generic/3.6: add platform specific power callbacks to {e,o}hci_platform drivers juhosg 2012-12-22 12:11:06 +0000
  • 26bf467fae [netfilter] fix ipv4 nat on 3.7 by adding missing iptables modules blogic 2012-12-22 10:17:29 +0000
  • 08cce55d9c [lantiq] ar9 did not load atm driver properly blogic 2012-12-22 10:16:52 +0000
  • 881b3504ae [lantiq] dont use input layer for gpio buttons blogic 2012-12-21 20:04:20 +0000
  • cef3fba37d [lantiq] default switch setup for WBMR blogic 2012-12-21 20:04:12 +0000
  • d8df31cd7d [lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143) blogic 2012-12-21 20:04:04 +0000
  • 41d3a10f48 [lantiq] adds script to set wps info on boards with a wps button blogic 2012-12-21 20:03:59 +0000
  • 41afc96ae1 [lantiq] minor tweaks to WBMR image blogic 2012-12-21 20:03:54 +0000
  • 75a9d0e41b [gpio-button-hotplug] add OF binding blogic 2012-12-21 20:03:49 +0000
  • b05c7e7166 [lantiq] add missing PHY_BASIC_FEATURES to 100mbit phys blogic 2012-12-21 14:41:35 +0000
  • 0ca5ac81bb [lantiq] fix typo inside fritz3370 devicetree file blogic 2012-12-21 14:41:30 +0000
  • 29c2480435 [lantiq] more devicetree fixes blogic 2012-12-21 13:47:55 +0000
  • 1b259a2387 [lantiq] improve button handling blogic 2012-12-21 13:47:50 +0000
  • 5fb086db47 [lantiq] add phy-reset gpio handling to xrx200-net blogic 2012-12-21 13:47:44 +0000
  • e8f1a67a24 [lantiq] add more lantiq phy ids based on daniels uboot code blogic 2012-12-21 13:47:40 +0000
  • ca7d6f9a2c [lantiq] refresh patch and install v1.1 gphy blobs blogic 2012-12-21 13:47:35 +0000
  • 5c4b06243a [lantiq] adsl firmware in wrong submenu blogic 2012-12-21 13:47:30 +0000
  • 4a57a236cb [lantiq] minor cleanup for adsl firmware handling blogic 2012-12-21 13:47:25 +0000
  • ea855caed8 [lantiq] properly symlink the adsl firmware blogic 2012-12-21 13:47:20 +0000
  • 33374b75cc [kernel] make to rtl8366_smi of binding use gpio_is_valid blogic 2012-12-21 13:47:14 +0000
  • 5ca25ac981 [package/base-files] hot-fix nameclash in sysupgrade: rename pivot() to supivot() in sysupgrade mirko 2012-12-21 12:10:21 +0000
  • 170303015d kernel: add solos-pci update for 3.3 juhosg 2012-12-21 10:38:33 +0000
  • 2a91547adb rb532: add support for 3.7 juhosg 2012-12-20 19:25:43 +0000
  • fd516a9a99 ramips: Add USB support for DAP-1350 platform. juhosg 2012-12-20 19:17:17 +0000
  • bcc5b96ea2 rb532: nuke 3.3 support juhosg 2012-12-20 19:09:03 +0000
  • 95e6918aa1 rb532: switch to 3.6.11 juhosg 2012-12-20 19:09:01 +0000
  • bf633a72dc rb532: add support for 3.6 juhosg 2012-12-20 19:09:00 +0000
  • 76b8515e4d ppc44x: add support for 3.7 juhosg 2012-12-20 18:11:22 +0000
  • 92520e6010 kernel: add solos-pci patches from 3.8 for new hardware juhosg 2012-12-20 17:14:57 +0000
  • 2537e8db61 linux: add missing symbols for 3.{6,7} juhosg 2012-12-20 17:14:56 +0000
  • 976f30f6bf kernel: fix module packages postinst by pointing to the new functions.sh location nbd 2012-12-20 15:29:37 +0000
  • 51e194d660 docs: update remaining references to functions.sh nbd 2012-12-20 15:29:33 +0000
  • f1b689a9f4 [package] base-files: we don't need /etc/functions.sh symlink anymore luka 2012-12-20 15:15:30 +0000
  • 02ad6192c2 cns21xx: add support for 3.7 juhosg 2012-12-20 14:51:17 +0000