qi-hardware/xburst-tools
1
0
Fork 0
mirror of git://projects.qi-hardware.com/xburst-tools.git synced 2024-11-22 18:12:27 +02:00
Code

qi-move-cpu-specific-drivers-into-cpu-dir.patch

Browse Source 
Signed-off-by: Andy Green <andy@openmoko.com>
This commit is contained in:
Andy Green 2008-11-28 10:16:40 +00:00 committed by Andy Green
parent 007a6b20a7
commit 24a263998c
18 changed files with 218 additions and 1010 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
qiboot/6410-partition-sd.sh
View File

@ -26,7 +26,7 @@ SIG=1
FDISK_SCRIPT=/tmp/_fds
if [ -z $1 -o -z $2 -o -z $3 ] ; then
if [ -z "$1" -o -z "$2" -o -z "$3" ] ; then
echo "This formats a SD card for usage on SD Card boot"
echo " on 6410 based systems"
echo

8
qiboot/Makefile
View File

@ -30,10 +30,10 @@ CFLAGS = -Wall -Werror -I $(INCLUDE) -g -c -Os -fno-strict-aliasing -mlong-calls
-fno-common -ffixed-r8 -msoft-float -fno-builtin -ffreestanding \
-march=armv4t -mno-thumb-interwork -Wstrict-prototypes \
-DBUILD_HOST="${BUILD_HOST}" -DBUILD_VERSION="${BUILD_VERSION}" \
-DBUILD_DATE="${BUILD_DATE}"
-DBUILD_DATE="${BUILD_DATE}" -DQI_CPU="${CPU}"
LDFLAGS =
S_SRCS = src/cpu/$(CPU)/start.S src/lowlevel_init.S
S_SRCS = $(wildcard src/cpu/$(CPU)/*.S)
S_OBJS = $(patsubst %.S,%.o, $(S_SRCS))
C_SRCS = $(wildcard src/*.c) \
$(wildcard src/drivers/*.c) $(wildcard src/fs/*.c) \
@ -44,6 +44,8 @@ SRCS = ${S_SRCS} ${C_SRCS}
OBJS = ${S_OBJS} ${C_OBJS}
LIBS = -L${COMPILER_LIB_PATH} -lgcc
OBJS = src/cpu/s3c6410/start.o src/cpu/s3c6410/start_qi.o src/cpu/s3c6410/serial-s3c64xx.o src/ctype.o src/utils.o src/cpu/s3c6410/tla01.o src/phase2.o
# GTA02 A5 and A6 U-Boot will eat these for DFU action
UDFU_VID = 0x1d50
UDFU_PID = 0x5119
@ -77,5 +79,5 @@ ${UDFU_IMAGE}:${OBJS} ${MKUDFU}
@$(OBJDUMP) -d ${TARGET} >${IMAGE}.dis
clean:
@rm -f src/*.o src/*~ include/*~ ${IMAGE_DIR}/* ${TARGET} ${UDFU_IMAGE}
@rm -f src/*.o cpu/*/*.o cpu/*/*~ src/*~ src/drivers/*.o src/drivers/*~ include/*~ ${IMAGE_DIR}/* ${TARGET} ${UDFU_IMAGE}
@make clean -C $(TOOLS)

75
qiboot/include/s3c6410.h
View File

@ -45,6 +45,8 @@ typedef enum {
S3C64XX_UART2,
} S3C64XX_UARTS_NR;
#define __REG(x) (*((unsigned int *)(x)))
//#include <s3c64x0.h>
#endif
@ -1306,79 +1308,6 @@ typedef enum {
/* include common stuff */
#ifndef __ASSEMBLY__
static inline S3C64XX_MEMCTL * S3C64XX_GetBase_MEMCTL(void)
{
return (S3C64XX_MEMCTL *)(ELFIN_DMC0_BASE);
}
static inline S3C64XX_USB_HOST * S3C64XX_GetBase_USB_HOST(void)
{
return (S3C64XX_USB_HOST *)ELFIN_USB_HOST_BASE;
}
static inline S3C64XX_INTERRUPT * S3C64XX_GetBase_INTERRUPT(void)
{
return (S3C64XX_INTERRUPT *)ELFIN_VIC0_BASE_ADDR;
}
static inline S3C64XX_DMAS * S3C64XX_GetBase_DMAS(void)
{
return (S3C64XX_DMAS *)ELFIN_DMA_BASE;
}
static inline S3C64XX_CLOCK_POWER * S3C64XX_GetBase_CLOCK_POWER(void)
{
return (S3C64XX_CLOCK_POWER *)ELFIN_CLOCK_POWER_BASE;
}
static inline S3C64XX_LCD * S3C64XX_GetBase_LCD(void)
{
return (S3C64XX_LCD *)ELFIN_LCD_BASE;
}
/*
static inline S3C2410_NAND * S3C2410_GetBase_NAND(void)
{
return (S3C2410_NAND *)ELFIN_NAND_BASE;
}
*/
static inline S3C64XX_UART * S3C64XX_GetBase_UART(S3C64XX_UARTS_NR nr)
{
// return (S3C64XX_UART *)(ELFIN_UART_BASE + (nr * 0x4000));
return (S3C64XX_UART *)(ELFIN_UART_BASE + (nr*0x400));
}
static inline S3C64XX_TIMERS * S3C64XX_GetBase_TIMERS(void)
{
return (S3C64XX_TIMERS *)ELFIN_TIMER_BASE;
}
/*
static inline S3C64XX_USB_DEVICE * S3C64XX_GetBase_USB_DEVICE(void)
{
return (S3C64XX_USB_DEVICE *)ELFIN_USB_DEVICE_BASE;
}
*/
static inline S3C64XX_WATCHDOG * S3C64XX_GetBase_WATCHDOG(void)
{
return (S3C64XX_WATCHDOG *)ELFIN_WATCHDOG_BASE;
}
static inline S3C64XX_I2C * S3C64XX_GetBase_I2C(void)
{
return (S3C64XX_I2C *)ELFIN_I2C_BASE;
}
static inline S3C64XX_I2S * S3C64XX_GetBase_I2S(void)
{
return (S3C64XX_I2S *)ELFIN_I2S_BASE;
}
static inline S3C64XX_GPIO * S3C64XX_GetBase_GPIO(void)
{
return (S3C64XX_GPIO *)ELFIN_GPIO_BASE;
}
static inline S3C64XX_RTC * S3C64XX_GetBase_RTC(void)
{
return (S3C64XX_RTC *)ELFIN_RTC_BASE;
}
static inline S3C2410_ADC * S3C2410_GetBase_ADC(void)
{
return (S3C2410_ADC *)ELFIN_ADC_BASE;
}
static inline S3C64XX_SPI * S3C64XX_GetBase_SPI(void)
{
return (S3C64XX_SPI *)ELFIN_SPI_BASE;
}
#if 0
static inline S3C2410_SDI * S3C2410_GetBase_SDI(void)
{

72
qiboot/include/serial-s3c64xx.h Normal file
View File

@ -0,0 +1,72 @@
/*
* (C) Copyright 2007 OpenMoko, Inc.
* Author: xiangfu liu <xiangfu@openmoko.org>
*
* Configuation settings for the FIC Neo GTA02 Linux GSM phone
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __SERIAL_S3C64XX_H__
#define __SERIAL_S3C64XX_H__
#define UART0 0
#define UART1 1
#define UART2 2
#define rGPHCON (*(volatile unsigned *)0x56000070) /*UART 0 Line control*/
#define rULCON0 (*(volatile unsigned *)0x50000000) /*UART 0 Line control*/
#define rUCON0 (*(volatile unsigned *)0x50000004) /*UART 0 Control*/
#define rUFCON0 (*(volatile unsigned *)0x50000008) /*UART 0 FIFO control*/
#define rUMCON0 (*(volatile unsigned *)0x5000000c) /*UART 0 Modem control*/
#define rUTRSTAT0 (*(volatile unsigned *)0x50000010) /*UART 0 Tx/Rx status*/
#define rUERSTAT0 (*(volatile unsigned *)0x50000014) /*UART 0 Rx error status*/
#define rUFSTAT0 (*(volatile unsigned *)0x50000018) /*UART 0 FIFO status*/
#define rUMSTAT0 (*(volatile unsigned *)0x5000001c) /*UART 0 Modem status*/
#define rUBRDIV0 (*(volatile unsigned *)0x50000028) /*UART 0 Baud rate divisor*/
#define rULCON1 (*(volatile unsigned *)0x50004000) /*UART 1 Line control*/
#define rUCON1 (*(volatile unsigned *)0x50004004) /*UART 1 Control*/
#define rUFCON1 (*(volatile unsigned *)0x50004008) /*UART 1 FIFO control*/
#define rUMCON1 (*(volatile unsigned *)0x5000400c) /*UART 1 Modem control*/
#define rUTRSTAT1 (*(volatile unsigned *)0x50004010) /*UART 1 Tx/Rx status*/
#define rUERSTAT1 (*(volatile unsigned *)0x50004014) /*UART 1 Rx error status*/
#define rUFSTAT1 (*(volatile unsigned *)0x50004018) /*UART 1 FIFO status*/
#define rUMSTAT1 (*(volatile unsigned *)0x5000401c) /*UART 1 Modem status*/
#define rUBRDIV1 (*(volatile unsigned *)0x50004028) /*UART 1 Baud rate divisor*/
#define rULCON2 (*(volatile unsigned *)0x50008000) /*UART 2 Line control*/
#define rUCON2 (*(volatile unsigned *)0x50008004) /*UART 2 Control*/
#define rUFCON2 (*(volatile unsigned *)0x50008008) /*UART 2 FIFO control*/
#define rUTRSTAT2 (*(volatile unsigned *)0x50008010) /*UART 2 Tx/Rx status*/
#define rUERSTAT2 (*(volatile unsigned *)0x50008014) /*UART 2 Rx error status*/
#define rUFSTAT2 (*(volatile unsigned *)0x50008018) /*UART 2 FIFO status*/
#define rUBRDIV2 (*(volatile unsigned *)0x50008028) /*UART 2 Baud rate divisor*/
#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000020)=(unsigned char)(ch)
#define RdURXH0() (*(volatile unsigned char *)0x50000024)
#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004020)=(unsigned char)(ch)
#define RdURXH1() (*(volatile unsigned char *)0x50004024)
#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008020)=(unsigned char)(ch)
#define RdURXH2() (*(volatile unsigned char *)0x50008024)
extern void serial_init_115200_s3c64xx(const int uart, const int pclk_MHz);
extern void serial_putc_s3c64xx(const int uart, const char c);
extern int puts(const char *string);
#endif

0
qiboot/src/drivers/i2c-bitbang-s3c24xx.c → qiboot/src/cpu/s3c2442/i2c-bitbang-s3c24xx.c
View File

0
qiboot/src/lowlevel_init.S → qiboot/src/cpu/s3c2442/lowlevel_init.S
View File

12
qiboot/src/cpu/s3c2442/qi.lds
View File

@ -37,12 +37,12 @@ SECTIONS
. = ALIGN(4);
.text :
{
src/cpu/s3c2442/start.o (.text .rodata* .data)
src/lowlevel_init.o (.text .rodata* .data)
src/cpu/s3c2442/start_qi.o (.text .rodata* .data)
src/blink_led.o (.text .rodata* .data)
src/cpu/s3c2442/nand_read.o (.text .rodata* .data)
src/drivers/serial-s3c24xx.o (.text .rodata* .data)
src/cpu/s3c2442/start.o (.text .rodata* .data)
src/lowlevel_init.o (.text .rodata* .data)
src/cpu/s3c2442/start_qi.o (.text .rodata* .data)
src/blink_led.o (.text .rodata* .data)
src/cpu/s3c2442/nand_read.o (.text .rodata* .data)
src/cpu/s3c2442/serial-s3c24xx.o (.text .rodata* .data)
}
. = ALIGN(4);

0
qiboot/src/drivers/s3c24xx-mci.c → qiboot/src/cpu/s3c2442/s3c24xx-mci.c
View File

0
qiboot/src/drivers/serial-s3c24xx.c → qiboot/src/cpu/s3c2442/serial-s3c24xx.c
View File

26
qiboot/src/cpu/s3c6410/qi.lds
View File

@ -29,29 +29,35 @@ SECTIONS
{
. = 0x00000000;
/* this is intended to take the first 4KBytes of stuff initially.
* We have to make sure we have .rodata* in there for everything
* because we do not compile PIC.
/* this text section is magically pulled from the SD Card
* and stored by the iRom at 0x0c000000, then it is jumped into
* by the iRom. So we arrange our early parts needed at 0 in the
* output file, but set to run at 0x0c000000+
*/
. = ALIGN(4);
.text :
.text 0x0c000000 : AT ( 0 )
{
src/cpu/s3c6410/start.o (.text .rodata* .data)
src/lowlevel_init.o (.text .rodata* .data)
src/cpu/s3c6410/start_qi.o (.text .rodata* .data)
src/blink_led.o (.text .rodata* .data)
src/cpu/s3c6410/start.o (.text .rodata* .data)
src/cpu/s3c6410/start_qi.o (.text .rodata* .data)
src/cpu/s3c6410/serial-s3c64xx.o (.text .rodata* .data)
src/cpu/s3c6410/tla01.o (.text .rodata* .data)
src/ctype.o (.text .rodata* .data)
src/phase2.o (.text .rodata* .data)
src/utils.o (.text .rodata* .data)
}
. = ALIGN(4);
/* . = ALIGN(4);
.everything_else ADDR (.text) + SIZEOF (.text) + 0x53000000 :
AT ( ADDR (.text) + SIZEOF (.text) ) { *(.text .rodata* .data) }
*/
. = 0x53800000 ;
/* . = 0x0c001900 ; */
__bss_start = .;
.bss_6410 (NOLOAD) :
{
* (.bss)
}
_end = .;
}

47
qiboot/src/cpu/s3c6410/serial-s3c64xx.c Normal file
View File

@ -0,0 +1,47 @@
/*
* (C) Copyright 2007 OpenMoko, Inc.
* Author: xiangfu liu <xiangfu@openmoko.org>
*
* Configuation settings for the FIC Neo GTA02 Linux GSM phone
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <qi.h>
#include <s3c6410.h>
/*
* Output a single byte to the serial port.
*/
void serial_putc_s3c64xx(const int uart, const char c)
{
switch(uart)
{
case 0:
while (!( UTRSTAT0_REG & 0x2 ))
;
UTXH0_REG = c;
break;
case 1:
while (!( UTRSTAT1_REG & 0x2))
;
UTXH1_REG = c;
break;
default:
break;
}
}

138
qiboot/src/cpu/s3c6410/start.S
View File

@ -141,11 +141,6 @@ _start_armboot:
_TEXT_BASE:
.word TEXT_BASE
processor_id:
.word 0
.word 0x41129200 /* s3c2442 ID */
.word 0x410fb760 /* s3c6410 ID */
/*
* These are defined in the board-specific linker script.
*/
@ -311,12 +306,12 @@ start_code:
mov r1, #0x0
str r1, [r0, #INDEX_DMC_MEMC_CMD]
check_dmc1_ready:
1:
ldr r1, [r0, #INDEX_DMC_MEMC_STATUS]
mov r2, #0x3
and r1, r1, r2
cmp r1, #0x1
bne check_dmc1_ready
bne 1b
nop
ldr r0, =ELFIN_CLOCK_POWER_BASE @0x7e00f000
@ -336,12 +331,12 @@ check_dmc1_ready:
orr r1, r1, r2
str r1, [r0, #OTHERS_OFFSET]
check_syncack:
2:
ldr r1, [r0, #OTHERS_OFFSET]
ldr r2, =0xf00
and r1, r1, r2
cmp r1, #0xf00
bne check_syncack
bne 2b
mov r1, #0xff00
orr r1, r1, #0xff
@ -385,8 +380,8 @@ check_syncack:
/* wait at least 200us to stablize all clock */
mov r1, #0x10000
1: subs r1, r1, #1
bne 1b
3: subs r1, r1, #1
bne 3b
ldr r1, [r0, #OTHERS_OFFSET]
orr r1, r1, #0x20
@ -417,121 +412,14 @@ check_syncack:
ldr r1, =0x1FFF
str r1, [r0, #UDIVSLOT_OFFSET]
ldr r1, =0x4f4f4f4f
str r1, [r0, #UTXH_OFFSET] @'O'
/* send out a char to say hello */
ldr r1, =0x55
str r1, [r0, #UTXH_OFFSET]
#if 0
/* Below code is for ARM926EJS and ARM1026EJS */
.globl cleanDCache
cleanDCache:
mrc p15, 0, pc, c7, c10, 3 /* test/clean D-Cache */
bne cleanDCache
mov pc, lr
.globl cleanFlushDCache
cleanFlushDCache:
mrc p15, 0, pc, c7, c14, 3 /* test/cleanflush D-Cache */
bne cleanFlushDCache
mov pc, lr
.globl cleanFlushCache
cleanFlushCache:
mrc p15, 0, pc, c7, c14, 3 /* test/cleanflush D-Cache */
bne cleanFlushCache
mcr p15, 0, r0, c7, c5, 0 /* flush I-Cache */
mov pc, lr
.ltorg
#endif
#if 0
/* enable only CPU peripheral block clocks we actually use */
ldr r0, =0x4c00000c /* clkcon */
ldr r1, =0x3f10 /* uart, pwm, gpio, nand, sdi clocks on */
str r1, [r0]
/* gpio UART2 init, H port */
ldr r0, =0x56000070
ldr r1, =0x001AAAAA
str r1, [r0]
/* enable KEEPACT(GPJ8) to make sure PMU keeps us alive */
ldr r0, =0x56000000 /* GPJ base */
ldr r1, [r0, #0xd0] /* GPJCON */
orr r1, r1, #(1 << 16)
str r1, [r0, #0xd0]
ldr r1, [r0, #0xd4] /* GPJDAT */
orr r1, r1, #(1 << 8)
str r1, [r0, #0xd4]
/* take sdram out of power down */
ldr r0, =0x56000080 /* misccr */
ldr r1, [ r0 ]
bic r1, r1, #(S3C2410_MISCCR_nEN_SCLK0 | S3C2410_MISCCR_nEN_SCLK1 | S3C2410_MISCCR_nEN_SCLKE)
str r1, [ r0 ]
/* ensure signals stabalise */
mov r1, #128
1: subs r1, r1, #1
bpl 1b
bl cpu_init_crit
/* ensure some refresh has happened */
ldr r1, =0xfffff
1: subs r1, r1, #1
bpl 1b
/* capture full EINT situation into gstatus 4 */
ldr r0, =0x4A000000 /* SRCPND */
ldr r1, [ r0 ]
and r1, r1, #0xf
ldr r0, =0x560000BC /* gstatus4 */
str r1, [ r0 ]
ldr r0, =0x560000A8 /* EINTPEND */
ldr r1, [ r0 ]
ldr r0, =0xfff0
and r1, r1, r0
ldr r0, =0x560000BC /* gstatus4 */
ldr r0, [ r0 ]
orr r1, r1, r0
ldr r0, =0x560000BC /* gstatus4 */
str r1, [ r0 ]
/* test for resume */
ldr r1, =0x560000B4 /* gstatus2 */
ldr r0, [ r1 ]
tst r0, #0x02 /* is this resume from power down */
/* well, if it was, we are going to jump to
* whatever address we stashed in gstatus3,
* and gstatus4 will hold the wake interrupt
* source for the OS to look at
*/
ldrne pc, [r1, #4]
#endif
/* >> CFG_VIDEO_LOGO_MAX_SIZE */
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
stack_setup:
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
sub sp, r0, #12 /* leave 3 words for abort-stack */
clear_bss:
ldr r0, _bss_start /* find start of bss segment */
ldr r1, _bss_end /* stop here */
@ -543,6 +431,14 @@ clbss_l:
cmp r0, r1
ble clbss_l
/* we are going to jump into the C part of the init now */
spin:
#if 0
ldr r0, =ELFIN_UART_CONSOLE_BASE
ldr r1, =0x55
push {r1}
pop {r1}
str r1, [r0, #UTXH_OFFSET] @'U'
#endif
b _steppingstone_done
4:
b 4b

7
qiboot/src/cpu/s3c6410/start_qi.c
View File

@ -37,6 +37,8 @@ const struct board_api *boards[] = {
struct board_api const * this_board;
extern int is_jtag;
#include <serial-s3c64xx.h>
void start_qi(void)
{
int flag = 0;
@ -97,9 +99,8 @@ void start_qi(void)
* jump to bootloader_second_phase() running from DRAM copy
*/
bootloader_second_phase();
#if 0
unhappy:
while(1)
;
#endif
}

71
qiboot/src/cpu/s3c6410/tla01.c
View File

@ -1,24 +1,25 @@
#include <qi.h>
#include <neo_tla01.h>
#include <serial-s3c24xx.h>
#include <ports-s3c24xx.h>
#include <i2c-bitbang-s3c24xx.h>
#include <serial-s3c64xx.h>
//#include <ports-s3c24xx.h>
//#include <i2c-bitbang-s3c24xx.h>
#include <pcf50633.h>
#define GTA03_DEBUG_UART 2
#define GTA03_DEBUG_UART 0
#define PCF50633_I2C_ADS 0x73
static const struct board_variant board_variants[] = {
[0] = {
.name = "TLA01",
.name = "SMDK",
.machine_revision = 0x010,
},
};
void port_init_tla01(void)
{
#if 0
unsigned int * MPLLCON = (unsigned int *)0x4c000004;
unsigned int * UPLLCON = (unsigned int *)0x4c000008;
unsigned int * CLKDIVN = (unsigned int *)0x4c000014;
@ -135,28 +136,7 @@ void port_init_tla01(void)
/* push DOWN1 (CPU Core rail) to 1.7V, allowing 533MHz */
i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_DOWN1OUT,
0x2b);
/* change CPU clocking to 533MHz 1:4:8 */
/* clock divide 1:4:8 - do it first */
*CLKDIVN = 5;
/* configure UPLL */
*UPLLCON = ((88 << 12) + (4 << 4) + 2);
/* Magic delay: Page 7-19, seven nops between UPLL and MPLL */
asm __volatile__ (
"nop\n"\
"nop\n"\
"nop\n"\
"nop\n"\
"nop\n"\
"nop\n"\
"nop\n"\
);
/* configure MPLL */
*MPLLCON = ((169 << 12) + (2 << 4) + 1);
serial_init_115200_s3c24xx(GTA03_DEBUG_UART, 66 /*MHz PCLK */);
#endif
}
/**
@ -167,36 +147,7 @@ void port_init_tla01(void)
int tla01_get_pcb_revision(void)
{
int n;
u32 u;
/* make B0 inputs */
rGPBCON &= ~0x00000003;
/* D8 and D9 inputs */
rGPDCON &= ~0x000f0000;
/* delay after changing pulldowns */
u = rGPBDAT;
u = rGPDDAT;
/* read the version info */
u = rGPBDAT;
n = (u >> (0 - 0))& 0x001;
u = rGPDDAT;
n |= (u >> (8 -1)) & 0x002;
n |= (u >> (9 - 2)) & 0x004;
/*
* when not being interrogated, all of the revision GPIO
* are set to output
*/
/* make B0 high ouput */
rGPBCON |= 0x00000001;
/* D8 and D9 high ouputs */
rGPDCON |= 0x00050000;
return n;
return 0;
}
const struct board_variant const * get_board_variant_tla01(void)
@ -212,7 +163,7 @@ int is_this_board_tla01(void)
static void putc_tla01(char c)
{
serial_putc_s3c24xx(GTA03_DEBUG_UART, c);
serial_putc_s3c64xx(GTA03_DEBUG_UART, c);
}
@ -222,9 +173,9 @@ static void putc_tla01(char c)
const struct board_api board_api_tla01 = {
.name = "TLA01",
.linux_machine_id = 1866,
.linux_mem_start = 0x30000000,
.linux_mem_start = 0x50000000,
.linux_mem_size = (128 * 1024 * 1024),
.linux_tag_placement = 0x30000000 + 0x100,
.linux_tag_placement = 0x50000000 + 0x100,
.get_board_variant = get_board_variant_tla01,
.is_this_board = is_this_board_tla01,
.port_init = port_init_tla01,

428
qiboot/src/gta02/gta02.c
View File

@ -1,428 +0,0 @@
/*
* (C) Copyright 2007 OpenMoko, Inc.
* Author: Andy Green <andy@openmoko.com>
*
* (port_init_gta02 came out of Openmoko U-Boot)
*
* Configuation settings for the OPENMOKO Neo GTA02 Linux GSM phone
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <qi.h>
#include <neo_gta02.h>
#include <serial-s3c24xx.h>
#include <ports-s3c24xx.h>
#include <i2c-bitbang-s3c24xx.h>
#include <pcf50633.h>
#include <glamo-init.h>
#define GTA02_DEBUG_UART 2
#define PCF50633_I2C_ADS 0x73
struct pcf50633_init {
u8 index;
u8 value;
};
const struct pcf50633_init pcf50633_init[] = {
{ PCF50633_REG_OOCWAKE, 0xd3 }, /* wake from ONKEY,EXTON!,RTC,USB,ADP */
{ PCF50633_REG_OOCTIM1, 0xaa }, /* debounce 14ms everything */
{ PCF50633_REG_OOCTIM2, 0x4a },
{ PCF50633_REG_OOCMODE, 0x55 },
{ PCF50633_REG_OOCCTL, 0x47 },
{ PCF50633_REG_SVMCTL, 0x08 }, /* 3.10V SYS voltage thresh. */
{ PCF50633_REG_BVMCTL, 0x02 }, /* 2.80V BAT voltage thresh. */
{ PCF50633_REG_AUTOENA, 0x01 }, /* always on */
{ PCF50633_REG_DOWN1OUT, 0x1b }, /* 1.3V (0x1b * .025V + 0.625V) */
{ PCF50633_REG_DOWN1ENA, 0x02 }, /* enabled if GPIO1 = HIGH */
{ PCF50633_REG_HCLDOOUT, 21 }, /* 3.0V (21 * 0.1V + 0.9V) */
{ PCF50633_REG_HCLDOENA, 0x01 }, /* ON by default*/
{ PCF50633_REG_INT1M, 0x00 },
{ PCF50633_REG_INT2M, 0x00 },
{ PCF50633_REG_INT3M, 0x00 },
{ PCF50633_REG_INT4M, 0x00 },
{ PCF50633_REG_INT5M, 0x00 },
{ PCF50633_REG_MBCC2, 0x28 }, /* Vbatconid=2.7V, Vmax=4.20V */
{ PCF50633_REG_MBCC3, 0x19 }, /* 25/255 == 98mA pre-charge */
{ PCF50633_REG_MBCC4, 0xff }, /* 255/255 == 1A adapter fast */
{ PCF50633_REG_MBCC5, 0x19 }, /* 25/255 == 98mA soft-start usb fast */
{ PCF50633_REG_MBCC6, 0x00 }, /* cutoff current 1/32 * Ichg */
{ PCF50633_REG_MBCC7, 0x00 }, /* 1.6A max bat curr, USB 100mA */
{ PCF50633_REG_MBCC8, 0x00 },
{ PCF50633_REG_MBCC1, 0xff }, /* chgena */
{ PCF50633_REG_BBCCTL, 0x19 }, /* 3V, 200uA, on */
{ PCF50633_REG_OOCSHDWN, 0x04 }, /* defeat 8s death from lowsys on A5 */
};
static const struct board_variant board_variants[] = {
[0] = {
.name = "A5 PCB",
.machine_revision = 0x350,
},
[1] = {
.name = "A6 PCB",
.machine_revision = 0x360,
}
};
void port_init_gta02(void)
{
#if 0
unsigned int * MPLLCON = (unsigned int *)0x4c000004;
unsigned int * UPLLCON = (unsigned int *)0x4c000008;
unsigned int * CLKDIVN = (unsigned int *)0x4c000014;
#endif
int n;
//CAUTION:Follow the configuration order for setting the ports.
// 1) setting value(GPnDAT)
// 2) setting control register (GPnCON)
// 3) configure pull-up resistor(GPnUP)
/* 32bit data bus configuration */
/*
* === PORT A GROUP
* Ports : GPA22 GPA21 GPA20 GPA19 GPA18 GPA17 GPA16 GPA15 GPA14 GPA13 GPA12
* Signal : nFCE nRSTOUT nFRE nFWE ALE CLE nGCS5 nGCS4 nGCS3 nGCS2 nGCS1
* Binary : 1 1 1 , 1 1 1 1 , 1 1 1 1
* Ports : GPA11 GPA10 GPA9 GPA8 GPA7 GPA6 GPA5 GPA4 GPA3 GPA2 GPA1 GPA0
* Signal : ADDR26 ADDR25 ADDR24 ADDR23 ADDR22 ADDR21 ADDR20 ADDR19 ADDR18 ADDR17 ADDR16 ADDR0
* Binary : 1 1 1 1 , 1 1 1 1 , 1 1 1 1
*/
rGPACON = 0x007E5FFF;
rGPADAT = 0x00000000;
/*
* ===* PORT B GROUP
* Ports : GPB10 GPB9 GPB8 GPB7 GPB6 GPB5 GPB4 GPB3 GPB2 GPB1 GPB0
* Signal : nXDREQ0 nXDACK0 nXDREQ1 nXDACK1 nSS_KBD nDIS_OFF L3CLOCK L3DATA L3MODE nIrDATXDEN Keyboard
* Setting: INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
* Binary : 00 , 01 00 , 01 00 , 01 01 , 01 01 , 01 01
*/
rGPBCON = 0x00155555;
rGPBUP = 0x000007FF;
rGPBDAT = 0x00000000;
/*
* === PORT C GROUP
* Ports : GPC15 GPC14 GPC13 GPC12 GPC11 GPC10 GPC9 GPC8 GPC7 GPC6 GPC5 GPC4 GPC3 GPC2 GPC1 GPC0
* Signal : VD7 VD6 VD5 VD4 VD3 VD2 VD1 VD0 LCDVF2 LCDVF1 LCDVF0 VM VFRAME VLINE VCLK LEND
* Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10
*/
rGPCCON = 0x55555155;
rGPCUP = 0x0000FFFF & ~(1 << 5);
rGPCDAT = (1 << 13) | (1 << 15); /* index detect -> hi */
/*
* === PORT D GROUP
* Ports : GPD15 GPD14 GPD13 GPD12 GPD11 GPD10 GPD9 GPD8 GPD7 GPD6 GPD5 GPD4 GPD3 GPD2 GPD1 GPD0
* Signal : VD23 VD22 VD21 VD20 VD19 VD18 VD17 VD16 VD15 VD14 VD13 VD12 VD11 VD10 VD9 VD8
* Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 ,10 10
*/
rGPDCON = 0x55555555;
rGPDUP = 0x0000FFFF;
rGPDDAT = (1 << 0) | (1 << 3) | (1 << 4); /* index detect -> hi */
/*
* === PORT E GROUP
* Ports : GPE15 GPE14 GPE13 GPE12 GPE11 GPE10 GPE9 GPE8 GPE7 GPE6 GPE5 GPE4
* Signal : IICSDA IICSCL SPICLK SPIMOSI SPIMISO SDDATA3 SDDATA2 SDDATA1 SDDATA0 SDCMD SDCLK I2SSDO
* Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 ,
* -------------------------------------------------------------------------------------------------------
* Ports : GPE3 GPE2 GPE1 GPE0
* Signal : I2SSDI CDCLK I2SSCLK I2SLRCK
* Binary : 10 10 , 10 10
*/
rGPECON = 0xAAAAAAAA;
rGPEUP = 0x0000FFFF & ~(1 << 11);
rGPEDAT = 0x00000000;
/*
* === PORT F GROUP
* Ports : GPF7 GPF6 GPF5 GPF4 GPF3 GPF2 GPF1 GPF0
* Signal : nLED_8 nLED_4 nLED_2 nLED_1 nIRQ_PCMCIA EINT2 KBDINT EINT0
* Setting: Output Output Output Output EINT3 EINT2 EINT1 EINT0
* Binary : 01 01 , 01 01 , 10 10 , 10 10
*/
/* pulldown on GPF03: TP-4705+debug - debug conn will float */
rGPFCON = 0x0000AAAA;
rGPFUP = 0x000000FF & ~(1 << 3);
rGPFDAT = 0x00000000;
/*
* === PORT G GROUP
* Ports : GPG15 GPG14 GPG13 GPG12 GPG11 GPG10 GPG9 GPG8 GPG7 GPG6
* Signal : nYPON YMON nXPON XMON EINT19 DMAMODE1 DMAMODE0 DMASTART KBDSPICLK KBDSPIMOSI
* Setting: nYPON YMON nXPON XMON EINT19 Output Output Output SPICLK1 SPIMOSI1
* Binary : 11 11 , 11 11 , 10 01 , 01 01 , 11 11
* -----------------------------------------------------------------------------------------
* Ports : GPG5 GPG4 GPG3 GPG2 GPG1 GPG0
* Signal : KBDSPIMISO LCD_PWREN EINT11 nSS_SPI IRQ_LAN IRQ_PCMCIA
* Setting: SPIMISO1 LCD_PWRDN EINT11 nSS0 EINT9 EINT8
* Binary : 11 11 , 10 11 , 10 10
*/
rGPGCON = 0x01AAFE79;
rGPGUP = 0x0000FFFF;
rGPGDAT = 0x00000000;
/*
* === PORT H GROUP
* Ports : GPH10 GPH9 GPH8 GPH7 GPH6 GPH5 GPH4 GPH3 GPH2 GPH1 GPH0
* Signal : CLKOUT1 CLKOUT0 UCLK RXD2 TXD2 RXD1 TXD1 RXD0 TXD0 nRTS0 nCTS0
* Binary : 10 , 10 10 , 11 11 , 10 10 , 10 10 , 10 10
*/
/* pulldown on GPH08: UEXTCLK, just floats!
* pulldown GPH0 -- nCTS0 / RTS_MODEM -- floats when GSM off
* pulldown GPH3 -- RXD[0] / TX_MODEM -- floats when GSM off
*/
rGPHCON = 0x001AAAAA;
rGPHUP = 0x000007FF & ~(1 << 8) & ~(1 << 0) & ~(1 << 3);
rGPHDAT = 0x00000000;
/* pulldown on GPJ00: input, just floats! */
/* pulldown on GPJ07: WLAN module WLAN_GPIO0, no ext pull */
rGPJCON = 0x1551544;
rGPJUP = 0x1ffff & ~(1 << 0) & ~(1 << 7);
rGPJDAT = 0x00000100;
rGPJDAT |= (1 << 4) | (1 << 6);
/* Set GPJ4 to high (nGSM_EN) */
/* Set GPJ6 to high (nDL_GSM) */
rGPJDAT &= ~(1 << 5); /* Set GPJ5 to low 3D RST */
/* leaving Glamo forced to Reset# active here killed
* U-Boot when you touched the memory region
*/
rGPJDAT |= (1 << 5); /* Set GPJ5 to high 3D RST */
/*
* We have to talk to the PMU a little bit
*/
for (n = 0; n < ARRAY_SIZE(pcf50633_init); n++)
i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS,
pcf50633_init[n].index, pcf50633_init[n].value);
#if 0
/* change CPU clocking to 400MHz 1:4:8 */
/* clock divide 1:4:8 - do it first */
*CLKDIVN = 5;
/* configure UPLL */
*UPLLCON = ((88 << 12) + (4 << 4) + 2);
/* Magic delay: Page 7-19, seven nops between UPLL and MPLL */
asm __volatile__ (
"nop\n"\
"nop\n"\
"nop\n"\
"nop\n"\
"nop\n"\
"nop\n"\
"nop\n"\
);
/* configure MPLL */
*MPLLCON = ((42 << 12) + (1 << 4) + 0);
/* get debug UART working at 115kbps */
serial_init_115200_s3c24xx(GTA02_DEBUG_UART, 50 /* 50MHz PCLK */);
#else
serial_init_115200_s3c24xx(GTA02_DEBUG_UART, 33 /* 33MHz PCLK */);
#endif
/* we're going to use Glamo for SD Card access, so we need to init the
* evil beast
*/
glamo_core_init();
}
/**
* returns PCB revision information in b9,b8 and b2,b1,b0
* Pre-GTA02 A6 returns 0x000
* GTA02 A6 returns 0x001
*/
int gta02_get_pcb_revision(void)
{
int n;
u32 u;
/* make C13 and C15 pulled-down inputs */
rGPCCON &= ~0xcc000000;
rGPCUP &= ~((1 << 13) | (1 << 15));
/* D0, D3 and D4 pulled-down inputs */
rGPDCON &= ~0x000003c3;
rGPDUP &= ~((1 << 0) | (1 << 3) | (1 << 4));
/* delay after changing pulldowns */
u = rGPCDAT;
u = rGPDDAT;
/* read the version info */
u = rGPCDAT;
n = (u >> (13 - 0)) & 0x001;
n |= (u >> (15 - 1)) & 0x002;
u = rGPDDAT;
n |= (u << (0 + 2)) & 0x004;
n |= (u << (8 - 3)) & 0x100;
n |= (u << (9 - 4)) & 0x200;
/*
* when not being interrogated, all of the revision GPIO
* are set to output HIGH without pulldown so no current flows
* if they are NC or pulled up.
*/
/* make C13 and C15 high ouputs with no pulldowns */
rGPCCON |= 0x44000000;
rGPCUP |= (1 << 13) | (1 << 15);
rGPCDAT |= (1 << 13) | (1 << 15);
/* D0, D3 and D4 high ouputs with no pulldowns */
rGPDCON |= 0x00000141;
rGPDUP |= (1 << 0) | (1 << 3) | (1 << 4);
rGPDDAT |= (1 << 0) | (1 << 3) | (1 << 4);
n &= 1;
return n;
}
int sd_card_init_gta02(void)
{
extern int mmc_init(int verbose);
return mmc_init(1);
}
int sd_card_block_read_gta02(unsigned char * buf, unsigned long start512,
int blocks512)
{
unsigned long mmc_bread(int dev_num, unsigned long blknr, unsigned long blkcnt,
void *dst);
return mmc_bread(0, start512, blocks512, buf);
}
/* return nonzero if we believe we run on GTA02 */
int is_this_board_gta02(void)
{
/* look for GTA02 NOR */
*(volatile unsigned short *)(0x18000000) = 0x98;
return !!(*(volatile unsigned short *)(0x18000000) == 0x0020);
}
const struct board_variant const * get_board_variant_gta02(void)
{
return &board_variants[gta02_get_pcb_revision() & 1];
}
static void putc_gta02(char c)
{
serial_putc_s3c24xx(GTA02_DEBUG_UART, c);
}
static void close_gta02(void)
{
/* explicitly clear any pending 8s timeout */
i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_OOCSHDWN, 0x04);
/* clear any pending timeouts by reading interrupts */
i2c_read_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_INT1);
i2c_read_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_INT2);
i2c_read_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_INT3);
i2c_read_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_INT4);
i2c_read_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_INT5);
/* set I2C GPIO back to peripheral unit */
(bb_s3c24xx.close)();
}
/*
* our API for bootloader on this machine
*/
const struct board_api board_api_gta02 = {
.name = "Freerunner / GTA02",
.linux_machine_id = 1304,
.linux_mem_start = 0x30000000,
.linux_mem_size = (128 * 1024 * 1024),
.linux_tag_placement = 0x30000000 + 0x100,
.get_board_variant = get_board_variant_gta02,
.is_this_board = is_this_board_gta02,
.port_init = port_init_gta02,
.putc = putc_gta02,
.close = close_gta02,
/* these are the ways we could boot GTA02 in order to try */
.kernel_source = {
[0] = {
.name = "SD Card EXT2 Kernel",
.block_init = sd_card_init_gta02,
.block_read = sd_card_block_read_gta02,
.partition_index = 1,
.filesystem = FS_EXT2,
.filepath = "boot/uImage.bin",
.commandline = "mtdparts=physmap-flash:-(nor);" \
"neo1973-nand:" \
"0x00040000(qi)," \
"0x00040000(cmdline)," \
"0x00800000(backupkernel)," \
"0x000a0000(extra)," \
"0x00040000(identity)," \
"0x0f6a0000(backuprootfs) " \
"rootfstype=ext3 " \
"root=/dev/mmcblk0p1 " \
"console=ttySAC2,115200 " \
"loglevel=8 " \
"init=/sbin/init "\
"ro"
},
[1] = {
.name = "NAND Kernel",
.block_read = nand_read_ll,
.offset_blocks512_if_no_partition = 0x80000 / 512,
.filesystem = FS_RAW,
.commandline = "mtdparts=physmap-flash:-(nor);" \
"neo1973-nand:" \
"0x00040000(qi)," \
"0x00040000(cmdline)," \
"0x00800000(backupkernel)," \
"0x000a0000(extra)," \
"0x00040000(identity)," \
"0x0f6a0000(backuprootfs) " \
"rootfstype=jffs2 " \
"root=/dev/mtdblock6 " \
"console=ttySAC2,115200 " \
"loglevel=8 " \
"init=/sbin/init "\
"ro"
},
},
};

289
qiboot/src/gta03/gta03.c
View File

@ -1,289 +0,0 @@
#include <qi.h>
#include <neo_gta03.h>
#include <serial-s3c24xx.h>
#include <ports-s3c24xx.h>
#include <i2c-bitbang-s3c24xx.h>
#include <pcf50633.h>
#include <s3c24xx-mci.h>
#define GTA03_DEBUG_UART 2
#define PCF50633_I2C_ADS 0x73
static const struct board_variant board_variants[] = {
[0] = {
.name = "EVB PCB",
.machine_revision = 0x010,
},
};
void port_init_gta03(void)
{
unsigned int * MPLLCON = (unsigned int *)0x4c000004;
unsigned int * UPLLCON = (unsigned int *)0x4c000008;
unsigned int * CLKDIVN = (unsigned int *)0x4c000014;
//CAUTION:Follow the configuration order for setting the ports.
// 1) setting value(GPnDAT)
// 2) setting control register (GPnCON)
// 3) configure pull-up resistor(GPnUP)
/* 32bit data bus configuration */
/*
* === PORT A GROUP
* Ports : GPA22 GPA21 GPA20 GPA19 GPA18 GPA17 GPA16 GPA15 GPA14 GPA13 GPA12
* Signal : nFCE nRSTOUT nFRE nFWE ALE CLE nGCS5 nGCS4 nGCS3 nGCS2 nGCS1
* Binary : 1 1 1 , 1 1 1 1 , 1 1 1 1
* Ports : GPA11 GPA10 GPA9 GPA8 GPA7 GPA6 GPA5 GPA4 GPA3 GPA2 GPA1 GPA0
* Signal : ADDR26 ADDR25 ADDR24 ADDR23 ADDR22 ADDR21 ADDR20 ADDR19 ADDR18 ADDR17 ADDR16 ADDR0
* Binary : 1 1 1 1 , 1 1 1 1 , 1 1 1 1
*/
rGPACON = 0x007F8FFF;
/*
* ===* PORT B GROUP
* Ports : GPB10 GPB9 GPB8 GPB7 GPB6 GPB5 GPB4 GPB3 GPB2 GPB1 GPB0
* Signal : nXDREQ0 nXDACK0 nXDREQ1 nXDACK1 nSS_KBD nDIS_OFF L3CLOCK L3DATA L3MODE nIrDATXDEN Keyboard
* Setting: INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
* Binary : 00 , 01 00 , 01 00 , 01 01 , 01 01 , 01 01
*/
rGPBCON = 0x00145554;
rGPBDAT |= (1 <<9 ); /* USB_PULLUP */
rGPBUP = 0x000007FF;
/*
* === PORT C GROUP
* Ports : GPC15 GPC14 GPC13 GPC12 GPC11 GPC10 GPC9 GPC8 GPC7 GPC6 GPC5 GPC4 GPC3 GPC2 GPC1 GPC0
* Signal : VD7 VD6 VD5 VD4 VD3 VD2 VD1 VD0 LCDVF2 LCDVF1 LCDVF0 VM VFRAME VLINE VCLK LEND
* Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10
*/
rGPCCON = 0xAAA776E9;
rGPCUP = 0x0000FFFF;
rGPCDAT |= (1 << 9); /* WLAN_nRESET pull high */
/*
* === PORT D GROUP
* Ports : GPD15 GPD14 GPD13 GPD12 GPD11 GPD10 GPD9 GPD8 GPD7 GPD6 GPD5 GPD4 GPD3 GPD2 GPD1 GPD0
* Signal : VD23 VD22 VD21 VD20 VD19 VD18 VD17 VD16 VD15 VD14 VD13 VD12 VD11 VD10 VD9 VD8
* Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 ,10 10
*/
rGPDCON = 0xAAA0AAA5;
rGPDUP = 0x0000FFFF;
/*
* === PORT E GROUP
* Ports : GPE15 GPE14 GPE13 GPE12 GPE11 GPE10 GPE9 GPE8 GPE7 GPE6 GPE5 GPE4
* Signal : IICSDA IICSCL SPICLK SPIMOSI SPIMISO SDDATA3 SDDATA2 SDDATA1 SDDATA0 SDCMD SDCLK I2SSDO
* Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 ,
* -------------------------------------------------------------------------------------------------------
* Ports : GPE3 GPE2 GPE1 GPE0
* Signal : I2SSDI CDCLK I2SSCLK I2SLRCK
* Binary : 10 10 , 10 10
*/
rGPECON = 0xAAAAAAAA;
rGPEUP = 0x0000FFFF;
/*
* === PORT F GROUP
* Ports : GPF7 GPF6 GPF5 GPF4 GPF3 GPF2 GPF1 GPF0
* Signal : nLED_8 nLED_4 nLED_2 nLED_1 nIRQ_PCMCIA EINT2 KBDINT EINT0
* Setting: Output Output Output Output EINT3 EINT2 EINT1 EINT0
* Binary : 01 01 , 01 01 , 10 10 , 10 10
*/
rGPFCON = 0x0000AAAA;
rGPFUP = 0x000000FF;
/*
* === PORT G GROUP
* Ports : GPG15 GPG14 GPG13 GPG12 GPG11 GPG10 GPG9 GPG8 GPG7 GPG6
* Signal : nYPON YMON nXPON XMON EINT19 DMAMODE1 DMAMODE0 DMASTART KBDSPICLK KBDSPIMOSI
* Setting: nYPON YMON nXPON XMON EINT19 Output Output Output SPICLK1 SPIMOSI1
* Binary : 11 11 , 11 11 , 10 01 , 01 01 , 11 11
* -----------------------------------------------------------------------------------------
* Ports : GPG5 GPG4 GPG3 GPG2 GPG1 GPG0
* Signal : KBDSPIMISO LCD_PWREN EINT11 nSS_SPI IRQ_LAN IRQ_PCMCIA
* Setting: SPIMISO1 LCD_PWRDN EINT11 nSS0 EINT9 EINT8
* Binary : 11 11 , 10 11 , 10 10
*/
rGPGCON = 0x02A9FE5A;
rGPGUP = 0x0000FFFF;
/*
* === PORT H GROUP
* Ports : GPH10 GPH9 GPH8 GPH7 GPH6 GPH5 GPH4 GPH3 GPH2 GPH1 GPH0
* Signal : CLKOUT1 CLKOUT0 UCLK RXD2 TXD2 RXD1 TXD1 RXD0 TXD0 nRTS0 nCTS0
* Binary : 10 , 10 10 , 11 11 , 10 10 , 10 10 , 10 10
*/
/* pulldown on GPH08: UEXTCLK, just floats!
* pulldown GPH0 -- nCTS0 / RTS_MODEM -- floats when GSM off
* pulldown GPH3 -- RXD[0] / TX_MODEM -- floats when GSM off
*/
rGPHCON = 0x0019A0AA;
rGPHUP = 0x000007FF;
/* pulldown on GPJ00: input, just floats! */
/* pulldown on GPJ07: WLAN module WLAN_GPIO0, no ext pull */
rGPJCON = 0x02AAAAAA;
rGPJUP = 0x1FFFF;
/*
* We have to talk to the PMU a little bit
*/
/* We need SD Card rail (HCLDO) at 3.0V */
i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_HCLDOOUT,
21);
/* switch HCLDO on */
i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_HCLDOENA, 1);
/* push DOWN1 (CPU Core rail) to 1.7V, allowing 533MHz */
i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_DOWN1OUT,
0x2b);
/* change CPU clocking to 533MHz 1:4:8 */
/* clock divide 1:4:8 - do it first */
*CLKDIVN = 5;
/* configure UPLL */
*UPLLCON = ((88 << 12) + (4 << 4) + 2);
/* Magic delay: Page 7-19, seven nops between UPLL and MPLL */
asm __volatile__ (
"nop\n"\
"nop\n"\
"nop\n"\
"nop\n"\
"nop\n"\
"nop\n"\
"nop\n"\
);
/* configure MPLL */
*MPLLCON = ((169 << 12) + (2 << 4) + 1);
serial_init_115200_s3c24xx(GTA03_DEBUG_UART, 66 /*MHz PCLK */);
}
/**
* returns PCB revision information in b0, d8, d9
* GTA03 EVB returns 0x000
* GTA03 returns 0x001
*/
int gta03_get_pcb_revision(void)
{
int n;
u32 u;
/* make B0 inputs */
rGPBCON &= ~0x00000003;
/* D8 and D9 inputs */
rGPDCON &= ~0x000f0000;
/* delay after changing pulldowns */
u = rGPBDAT;
u = rGPDDAT;
/* read the version info */
u = rGPBDAT;
n = (u >> (0 - 0))& 0x001;
u = rGPDDAT;
n |= (u >> (8 -1)) & 0x002;
n |= (u >> (9 - 2)) & 0x004;
/*
* when not being interrogated, all of the revision GPIO
* are set to output
*/
/* make B0 high ouput */
rGPBCON |= 0x00000001;
/* D8 and D9 high ouputs */
rGPDCON |= 0x00050000;
return n;
}
const struct board_variant const * get_board_variant_gta03(void)
{
return &board_variants[gta03_get_pcb_revision()];
}
int is_this_board_gta03(void)
{
/* FIXME: find something gta03 specific */
return 1;
}
static void putc_gta03(char c)
{
serial_putc_s3c24xx(GTA03_DEBUG_UART, c);
}
int sd_card_init_gta03(void)
{
return s3c24xx_mmc_init(1);
}
int sd_card_block_read_gta03(unsigned char * buf, unsigned long start512,
int blocks512)
{
return s3c24xx_mmc_bread(0, start512, blocks512, buf);
}
/*
* our API for bootloader on this machine
*/
const struct board_api board_api_gta03 = {
.name = "GTA03-2442",
.linux_machine_id = 1866,
.linux_mem_start = 0x30000000,
.linux_mem_size = (128 * 1024 * 1024),
.linux_tag_placement = 0x30000000 + 0x100,
.get_board_variant = get_board_variant_gta03,
.is_this_board = is_this_board_gta03,
.port_init = port_init_gta03,
.putc = putc_gta03,
/* these are the ways we could boot GTA03 in order to try */
.kernel_source = {
[0] = {
.name = "SD Card EXT2 Kernel",
.block_init = sd_card_init_gta03,
.block_read = sd_card_block_read_gta03,
.partition_index = 1,
.filesystem = FS_EXT2,
.filepath = "boot/uImage.bin",
.commandline = "mtdparts=physmap-flash:-(nor);" \
"neo1973-nand:" \
"0x00040000(qi)," \
"0x00040000(cmdline)," \
"0x00800000(backupkernel)," \
"0x000a0000(extra)," \
"0x00040000(identity)," \
"0x0f6a0000(backuprootfs) " \
"rootfstype=ext2 " \
"root=/dev/mmcblk0p1 " \
"console=ttySAC2,115200 " \
"loglevel=4 " \
"init=/sbin/init "\
"ro"
},
[1] = {
.name = "NAND Kernel",
.block_read = nand_read_ll,
.offset_blocks512_if_no_partition = 0x80000 / 512,
.filesystem = FS_RAW,
.commandline = "mtdparts=neo1973-nand:" \
"0x00040000(qi)," \
"0x00040000(cmdline)," \
"0x00800000(backupkernel)," \
"0x000a0000(extra)," \
"0x00040000(identity)," \
"0x0f6a0000(backuprootfs) " \
"rootfstype=jffs2 " \
"root=/dev/mtdblock6 " \
"console=ttySAC2,115200 " \
"loglevel=4 " \
"init=/sbin/init "\
"ro"
},
},
};

21
qiboot/src/phase2.c
View File

@ -39,13 +39,17 @@ unsigned long partition_length_blocks = 0;
struct kernel_source const * this_kernel = 0;
int raise(int n)
{
return 0;
}
void bootloader_second_phase(void)
{
void (*the_kernel)(int zero, int arch, uint params);
int kernel = 0;
const struct board_variant * board_variant =
(this_board->get_board_variant)();
const struct board_variant * board_variant;
/* okay, do the critical port and serial init for our board */
@ -53,9 +57,10 @@ void bootloader_second_phase(void)
/* stick some hello messages on debug console */
puts("\n\n\nQi Bootloader "stringify2(BUILD_HOST)" "
stringify2(BUILD_VERSION)" "
stringify2(BUILD_DATE)"\n");
puts("\n\n\nQi Bootloader "stringify2(QI_CPU)" "
stringify2(BUILD_HOST)" "
stringify2(BUILD_VERSION)" "
stringify2(BUILD_DATE)"\n");
puts("Copyright (C) 2008 Openmoko, Inc.\n");
puts("This is free software; see the source for copying conditions.\n"
@ -145,6 +150,7 @@ void bootloader_second_phase(void)
switch (this_kernel->filesystem) {
case FS_EXT2:
#if 0
if (!ext2fs_mount()) {
puts("Unable to mount ext2 filesystem\n");
this_kernel = &this_board->
@ -162,6 +168,7 @@ void bootloader_second_phase(void)
}
ext2fs_read(kernel_dram, 4096);
break;
#endif
case FS_FAT:
/* FIXME */
case FS_RAW:
@ -199,9 +206,11 @@ void bootloader_second_phase(void)
switch (this_kernel->filesystem) {
case FS_EXT2:
#if 0
/* This read API always restarts from beginning */
ext2fs_read(kernel_dram, kernel_size);
break;
#endif
case FS_FAT:
/* FIXME */
case FS_RAW:
@ -297,5 +306,5 @@ void bootloader_second_phase(void)
puts("No usable kernel image found, we've had it :-(\n");
while (1)
blue_on(1);
;
}

32
qiboot/src/utils.c
View File

@ -26,10 +26,6 @@
static u8 malloc_pool[100 * 1024];
void * malloc_pointer = &malloc_pool[0];
int raise(int n)
{
return 0;
}
size_t strlen(const char *s)
{
@ -139,22 +135,38 @@ void hexdump(unsigned char *start, int len)
void printdec(int n)
{
int d = 1 * 1000 * 1000 * 1000;
int d[] = {
1 * 1000 * 1000 * 1000,
100 * 1000 * 1000,
10 * 1000 * 1000,
1 * 1000 * 1000,
100 * 1000,
10 * 1000,
1 * 1000,
100,
10,
1,
0
};
int flag = 0;
int div = 0;
if (n < 0) {
this_board->putc('-');
n = -n;
}
while (d) {
int r = n / d;
if (r || flag || (d == 1)) {
while (d[div]) {
int r = 0;
while (n >= d[div]) {
r++;
n -= d[div];
}
if (r || flag || (d[div] == 1)) {
this_board->putc('0' + r);
flag = 1;
}
n -= r * d;
d = d / 10;
div++;
}
}