cleanup the kerenl, mv the Changelog to qi-kernel

kernel/Changelog-linux-2.6.24.3.txt

@@ -1,124 +0,0 @@
-*********************************************************************
-Steps to build the kernel:
-
-Download and install the cross toolchain gcc version 4 for Linux 2.6.
-
-$ cd /opt
-$ tar xjf mipseltools-gcc412-glibc261.tar.bz2
-$ export PATH=/opt/mipseltools-gcc412-glibc261/bin:$PATH
-
-Download the linux kernel tarball linux-2.6.24.3.tar.bz2 and unpack it:
-
-$ tar xjf linux-2.6.24.3.tar.bz2
-
-Download the latest kernel patch and patch it to the kernel tree:
-
-$ cd linux-2.6.24.3
-$ gzip -cd ../linux-2.6.24.3-jz-yyyymmdd.patch.gz | patch -p1
-
-Make defconfig of the JZSOC based platform, eg:
-
-$ make apus_defconfig	(JZ4750 based APUS board)
-or
-$ make pavo_defconfig	(JZ4740 based PAVO board)
-or
-$ make pmp_defconfig	(JZ4730 based PMP board)
-
-Build the kernel:
-
-$ make xconfig
-$ make uImage
-or
-# make zImage
-or
-# make modules
-
-
-*********************************************************************
-
-linux-2.6.24.3-jz-20090226.patch.gz
-
-  * Fixed a bug of YAFFS2 on JZ4750 when using BCH ECC algorithm.
-    
-linux-2.6.24.3-jz-20090218.patch.gz
-
-  * Support Jz4750
-  * Converted MTD from 32bit to 64bit to support the NAND larger than 2GB, and yaffs2 was 
-    modified accordingly.
-  * Supported multi-plane operation and multiply chip selecting for NAND flash. 
-  * Whether NAND multiple planes operation for one partition is used or not could be 
-    determined by the value of use_planes in partition_info[] in drivers/mtd/nand/jz47xx_nand.c
-  * Modified yaffs2 utils mkyaffs2image to support writting 4KB pagesize NAND and enable 
-    writing soft reed-solomn ECC for yaffs2 file system information in oob area of MLC nand
-
-linux-2.6.24.3-jz-20080926.patch.gz:
-
-  * Fixed a fatal bug for mplayer, which may cause some files cannot be played and the system is crashed.
-    Updated file: arch/mips/jz4740/proc.c.
-  * Modify jzfb_mmap() for cacheable LCD framebuffer access.
-
-linux-2.6.24.3-jz-20080815.patch.gz:
-
-  * Modify ipu interface to toggle PID of MPlayer in TLB.
-  * Modify OSS ioctl function to play movie with mono channel better. 
-  * Check whether the free block of nand is erased before erasing it, 'unsigned int' instead of
-    'unsigned short' was used to store block number, and heap sort for lifetime after 
-     erasing a block was replaced by another faster method.
-  * Cache read was used in nand_read_page_hwecc_rs() for Jz4740.
-  * Faster timing in REG_EMC_SMCR1 whose value is 0x09221200 was used.
-  * Supported 4KB page size nand
-  * Soft reed solomon ECC was supported for yaffs2 information which is 16 bytes in nand 
-    oob, and it should be used for MLC nand.
-  * Added support to generate any frequency baud rate of uart for both Jz4740 and Jz4750.
-  * Modified Jz4750's INTC, CIM, TSSI, macros.
-  * Combined Jz4750 SLCD Controller support into drivers/video/jz4750_lcd.c, which now support
-    LCD Controller, Slcd Controller and TVE. And add smart lcd panel TRULY_TFT_GG1P0319LTSW_W support.
-  * Add Jz4750 LCDC and TVE driver. 
-  * Modified CONFIG_FB_JZXXX macros, rename drivers/video/jzslcd.x to drivers/video/jz4740_slcd.x
-  * Add jz_clocksource, upgrade the system time's accuracy from 10ms to about 1(or 2) us.
-    but the system timer remained 10ms.
-  * Updated UBIFS.
-
-linux-2.6.24.3-jz-20080530.patch.gz:
-
-  * Added JZ4720 virgo board support.
-  * Added definition of CONFIG_SOC_JZ4725 and CONFIG_SOC_JZ4720.
-  * Added selection of 4-bit/1-bit data bus for MMC/SD card driver.
-  * Added dipper_defconfig for JZ4725 DIPPER board.
-  * Modified sound/oss/jz_i2s.c to increase the sound buffer.
-  * Modified pavo_defconfig to select the oss sound driver by default.
-  * Fixed jzlcd.h for jz4730 pmp.
-  * Modified jzcs8900a.c to not test the chip ID.
-
-linux-2.6.24.3-jz-20080526.patch.gz:
-
-  * Rewrote all of the UBI and UBIFS codes and their utilities.
-  * Modified MMC/SD driver jz_mmc.c to support PM callback.
-  * Fixed a bug of mtdblock-jz.uu of using the badblock_table.
-  * Patch jz4740_nand.c to optimize the RS correction algorithm.
-  * Jzlcd driver added framebuffer rotation support.
-
-linux-2.6.24.3-jz-20080422.patch.gz:
-
-  * Supported multi-framebuffers LCD driver.
-  * Modified sound/soc/jz4740/jz4740-i2s.c to support 32KHz PCM sample.
-  * Ported new mtd-utils and mkfs.ubifs.
-  * Added jzslcd.c for Smart LCD framebuffer driver.
-  * Modified rtc_jz.c to use some functions in rtc library instead of our function.
-  * Added jz_keypad.c and gpio_keys.c for scan keypad drivers.
-  * Added block-jz.c to support block device layer on top of ubi.
-  * Modified jz4740_udc.c to enable the suspend irq when host unloads us.
-  * pavo_defconfig: select CONFIG_WIRELESS_EXT, CONFIG_PNP and CONFIG_SERIAL_8250_PNP.
-  * Modified jz_ts.c jz_ts.h and sadc.c to release CPU by interrupt mode instead of pio mode.
-  * Fixed a bug in jz4740_udc.c and jz4730_udc.c during rmmod the driver.
-  * Modified jz_i2s.c to fix the jz_audio_release().
-  * Fixed udc_hotplug.c to avoid the "unexpected IRQ".
-  * Fixed jz4740/cpufreq.c of calculating the new_mclk.
-  * Modified drivers/video/console/fbcon.c by adding fb_flashcursor selection.
-
-linux-2.6.24.3-jz-20080304.patch.gz: 
-
-  * First full release, support JZ4740 PAVO and JZ4730 PMP boards.
-  * Some important drivers: YAFFS2, UBI & UBIFS, Power management,
-    SLC/MLC NAND, MMC/SD, LCD framebuffer, ALSA/OSS audio, UDC,
-    USB host, Camera, RTC, WatchDog, udev, hotplug etc.