qi-hardware/xburst-tools
1
0
Fork 0
mirror of git://projects.qi-hardware.com/xburst-tools.git synced 2024-11-26 04:10:17 +02:00
Code

qi-add-more-pcf50633-init.patch

Browse Source 
We need to set a few more things up in pcf50633 to get suspend and resume
to work -- without them suspend actually goes OFF.  Take the opportunity
to optimize this init significantly.

Signed-off-by: Andy Green <andy@openmoko.com>
This commit is contained in:
Andy Green 2008-11-28 10:16:39 +00:00 committed by Andy Green
parent 53ce7d80f0
commit 4414f130bd
1 changed files with 41 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

51
qiboot/src/gta02/gta02.c
View File

@ -35,6 +35,42 @@
#define PCF50633_I2C_ADS 0x73
struct pcf50633_init {
u8 index;
u8 value;
};
const struct pcf50633_init pcf50633_init[] = {
{ PCF50633_REG_OOCWAKE, 0xd3 }, /* wake from ONKEY,EXTON!,RTC,USB,ADP */
{ PCF50633_REG_OOCTIM1, 0xaa }, /* debounce 14ms everything */
{ PCF50633_REG_OOCTIM2, 0x4a },
{ PCF50633_REG_OOCMODE, 0x55 },
{ PCF50633_REG_OOCSHDWN, 0x04 }, /* defeat 8s death from lowsys on A5 */
{ PCF50633_REG_OOCCTL, 0x47 },
{ PCF50633_REG_SVMCTL, 0x08 }, /* 3.10V SYS voltage thresh. */
{ PCF50633_REG_BVMCTL, 0x02 }, /* 2.80V BAT voltage thresh. */
{ PCF50633_REG_AUTOENA, 0x01 }, /* always on */
{ PCF50633_REG_DOWN1OUT, 0x1b }, /* 1.3V (0x1b * .025V + 0.625V) */
{ PCF50633_REG_DOWN1ENA, 0x02 }, /* enabled if GPIO1 = HIGH */
{ PCF50633_REG_HCLDOOUT, 21 }, /* 3.0V (21 * 0.1V + 0.9V) */
{ PCF50633_REG_HCLDOENA, 0x01 }, /* ON by default*/
{ PCF50633_REG_MBCC1, 0xe6 },
{ PCF50633_REG_MBCC2, 0x28 }, /* Vbatconid=2.7V, Vmax=4.20V */
{ PCF50633_REG_MBCC3, 0x19 }, /* 25/255 == 98mA pre-charge */
{ PCF50633_REG_MBCC4, 0xff }, /* 255/255 == 1A adapter fast */
{ PCF50633_REG_MBCC5, 0x19 }, /* 25/255 == 98mA soft-start usb fast */
{ PCF50633_REG_MBCC6, 0x00 }, /* cutoff current 1/32 * Ichg */
{ PCF50633_REG_MBCC7, 0x00 }, /* 1.6A max bat curr, USB 100mA */
{ PCF50633_REG_MBCC8, 0x00 },
{ PCF50633_REG_BBCCTL, 0x19 }, /* 3V, 200uA, on */
};
static const struct board_variant board_variants[] = {
[0] = {
.name = "A5 PCB",
@ -52,6 +88,7 @@ void port_init_gta02(void)
unsigned int * MPLLCON = (unsigned int *)0x4c000004;
unsigned int * UPLLCON = (unsigned int *)0x4c000008;
unsigned int * CLKDIVN = (unsigned int *)0x4c000014;
int n;
//CAUTION:Follow the configuration order for setting the ports.
// 1) setting value(GPnDAT)
@ -168,16 +205,10 @@ void port_init_gta02(void)
* We have to talk to the PMU a little bit
*/
/* We need SD Card rail (HCLDO) at 3.0V */
i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_HCLDOOUT,
21);
for (n = 0; n < ARRAY_SIZE(pcf50633_init); n++)
i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS,
pcf50633_init[n].index, pcf50633_init[n].value);
/* switch HCLDO on */
i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_HCLDOENA, 1);
/* push DOWN1 (CPU Core rail) to 1.3V, allowing 400MHz */
i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_DOWN1OUT,
0x1b);
/* change CPU clocking to 400MHz 1:4:8 */
@ -327,7 +358,7 @@ const struct board_api board_api_gta02 = {
"rootfstype=ext3 " \
"root=/dev/mmcblk0p1 " \
"console=ttySAC2,115200 " \
"loglevel=4 " \
"loglevel=8 " \
"init=/sbin/init "\
"ro"
},