mirror of
git://projects.qi-hardware.com/xburst-tools.git
synced 2024-11-26 10:46:16 +02:00
change usb_read_data_from_ingenic functio to take three argument
This commit is contained in:
xiangfu
parent
d66be487ab
commit
fe484a65ee
105
flash-tool/cmd.c
105
flash-tool/cmd.c
@ -116,9 +116,7 @@ int init_cfg()
|
||||
if (usb_ingenic_configration(&ingenic_dev, DS_hand) != 1)
|
||||
return -1;
|
||||
|
||||
ingenic_dev.file_buff = ret;
|
||||
ingenic_dev.file_len = 8;
|
||||
if (usb_read_data_from_ingenic(&ingenic_dev) != 1)
|
||||
if (usb_read_data_from_ingenic(&ingenic_dev, ret, 8) != 1)
|
||||
return -1;
|
||||
|
||||
return 1;
|
||||
@ -197,11 +195,10 @@ int error_check(unsigned char *org,unsigned char * obj,unsigned int size)
|
||||
unsigned int i;
|
||||
for (i = 0; i < size; i++) {
|
||||
if (org[i] != obj[i]) {
|
||||
printf("\n Check Error! %d=%x:%x ", i, org[i], obj[i]);
|
||||
printf("\n Check Error! %d = %x : %x ", i, org[i], obj[i]);
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
/* printf("\n Check pass"); */
|
||||
return 1;
|
||||
}
|
||||
|
||||
@ -211,17 +208,14 @@ int nand_markbad(struct nand_in_t *nand_in)
|
||||
printf("\n Device unboot! Boot it first!");
|
||||
return -1;
|
||||
}
|
||||
/* printf("mark bad block : %d \n",nand_in->start); */
|
||||
printf("\n mark bad block : %d ",nand_in->start);
|
||||
usb_send_data_address_to_ingenic(&ingenic_dev, nand_in->start);
|
||||
usb_ingenic_nand_ops(&ingenic_dev, NAND_MARK_BAD);
|
||||
ingenic_dev.file_buff = ret;
|
||||
ingenic_dev.file_len = 8;
|
||||
usb_read_data_from_ingenic(&ingenic_dev);
|
||||
usb_read_data_from_ingenic(&ingenic_dev, ret, 8);
|
||||
printf("\n Mark bad block at %d ",((ret[3] << 24) |
|
||||
(ret[2] << 16) |
|
||||
(ret[1] << 8) |
|
||||
(ret[0] << 0)) / hand.nand_ppb);
|
||||
/* Handle_Close(); */
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -251,7 +245,6 @@ int nand_program_check(struct nand_in_t *nand_in,
|
||||
ingenic_dev.file_buff = nand_in->buf;
|
||||
ingenic_dev.file_len = nand_in->length;
|
||||
usb_send_data_to_ingenic(&ingenic_dev);
|
||||
/* WriteFile(hDevice, nand_in->buf, nand_in->length , &nWritten, NULL); */
|
||||
/* dump_data(nand_in->buf, 100); */
|
||||
for (i = 0; i < nand_in->max_chip; i++) {
|
||||
if ((nand_in->cs_map)[i]==0) continue;
|
||||
@ -267,67 +260,36 @@ int nand_program_check(struct nand_in_t *nand_in,
|
||||
page_num++;
|
||||
/* temp = ((i<<4) & 0xff0) + NAND_PROGRAM_OOB; */
|
||||
}
|
||||
temp = ((nand_in->option<<12) & 0xf000) + ((i<<4) & 0xff0) + NAND_PROGRAM;
|
||||
temp = ((nand_in->option << 12) & 0xf000) + ((i<<4) & 0xff0) + NAND_PROGRAM;
|
||||
usb_send_data_address_to_ingenic(&ingenic_dev, nand_in->start);
|
||||
usb_send_data_length_to_ingenic(&ingenic_dev, page_num);
|
||||
usb_ingenic_nand_ops(&ingenic_dev, temp);
|
||||
ingenic_dev.file_buff = ret;
|
||||
ingenic_dev.file_len = 8;
|
||||
usb_read_data_from_ingenic(&ingenic_dev);
|
||||
/* ReadFile(hDevice, ret, 8, &nRead, NULL); needs change */
|
||||
usb_read_data_from_ingenic(&ingenic_dev, ret, 8);
|
||||
printf(" Finish! ");
|
||||
switch (nand_in->option)
|
||||
{
|
||||
case OOB_ECC:
|
||||
|
||||
usb_send_data_address_to_ingenic(&ingenic_dev, nand_in->start);
|
||||
/* Read back to check! */
|
||||
usb_send_data_length_to_ingenic(&ingenic_dev, page_num);
|
||||
temp = ((OOB_ECC<<12) & 0xf000) +((i<<4) & 0xff0) + NAND_READ;
|
||||
usb_ingenic_nand_ops(&ingenic_dev, temp);
|
||||
printf("Checking...");
|
||||
ingenic_dev.file_buff = check_buf;
|
||||
ingenic_dev.file_len = page_num * (hand.nand_ps + hand.nand_os);
|
||||
usb_read_data_from_ingenic(&ingenic_dev);
|
||||
ingenic_dev.file_buff = ret;
|
||||
ingenic_dev.file_len = 8;
|
||||
usb_read_data_from_ingenic(&ingenic_dev);
|
||||
/* ReadFile(hDevice, check_buf, */
|
||||
/* page_num * (hand.nand_ps + hand.nand_os), &nRead, NULL); */
|
||||
/* ReadFile(hDevice, ret, 8, &nRead, NULL); need change */
|
||||
|
||||
switch (nand_in->option) {
|
||||
case OOB_ECC:
|
||||
temp = ((OOB_ECC << 12) & 0xf000) +((i << 4) & 0xff0) + NAND_READ;
|
||||
break;
|
||||
case OOB_NO_ECC:/* do not support data verify */
|
||||
usb_send_data_address_to_ingenic(&ingenic_dev, nand_in->start);
|
||||
usb_send_data_length_to_ingenic(&ingenic_dev, page_num);
|
||||
case OOB_NO_ECC: /* do not support data verify */
|
||||
temp = ((OOB_NO_ECC << 12) & 0xf000) + ((i << 4) & 0xff0) + NAND_READ;
|
||||
usb_ingenic_nand_ops(&ingenic_dev, temp);
|
||||
printf("Checking...");
|
||||
ingenic_dev.file_buff = check_buf;
|
||||
ingenic_dev.file_len = page_num * (hand.nand_ps + hand.nand_os);
|
||||
usb_read_data_from_ingenic(&ingenic_dev);
|
||||
ingenic_dev.file_buff = ret;
|
||||
ingenic_dev.file_len = 8;
|
||||
usb_read_data_from_ingenic(&ingenic_dev);
|
||||
/* ReadFile(hDevice, check_buf, page_num * (hand.nand_ps + hand.nand_os), &nRead, NULL); */
|
||||
/* ReadFile(hDevice, ret, 8, &nRead, NULL); needs change*/
|
||||
break;
|
||||
case NO_OOB:
|
||||
usb_send_data_address_to_ingenic(&ingenic_dev, nand_in->start);
|
||||
usb_send_data_length_to_ingenic(&ingenic_dev, page_num);
|
||||
temp = ((NO_OOB << 12) & 0xf000) + ((i << 4) & 0xff0) + NAND_READ;
|
||||
break;
|
||||
default:
|
||||
;
|
||||
}
|
||||
usb_ingenic_nand_ops(&ingenic_dev, temp);
|
||||
printf("Checking...");
|
||||
ingenic_dev.file_buff = check_buf;
|
||||
ingenic_dev.file_len = page_num * (hand.nand_ps + hand.nand_os);
|
||||
usb_read_data_from_ingenic(&ingenic_dev);
|
||||
ingenic_dev.file_buff = ret;
|
||||
ingenic_dev.file_len = 8;
|
||||
usb_read_data_from_ingenic(&ingenic_dev);
|
||||
/* ReadFile(hDevice, check_buf, page_num * hand.nand_ps , &nRead, NULL); */
|
||||
/* ReadFile(hDevice, ret, 8, &nRead, NULL); need change*/
|
||||
break;
|
||||
default:;
|
||||
}
|
||||
#if 1
|
||||
usb_read_data_from_ingenic(&ingenic_dev, check_buf,
|
||||
page_num * (hand.nand_ps + hand.nand_os));
|
||||
usb_read_data_from_ingenic(&ingenic_dev, ret, 8);
|
||||
|
||||
if (nand_in->start < 1 && hand.nand_ps == 4096 && hand.fw_args.cpu_id == 0x4740) {
|
||||
/* (nand_out->status)[i] = 1; */
|
||||
printf(" no check!");
|
||||
@ -335,11 +297,14 @@ int nand_program_check(struct nand_in_t *nand_in,
|
||||
printf(" End at %d ",cur_page);
|
||||
continue;
|
||||
}
|
||||
#endif
|
||||
|
||||
if (nand_in->check(nand_in->buf, check_buf, nand_in->length)) {
|
||||
/* (nand_out->status)[i] = 1; */
|
||||
printf(" pass!");
|
||||
cur_page = (ret[3]<<24)|(ret[2]<<16)|(ret[1]<<8)|(ret[0]<<0);
|
||||
cur_page = (ret[3] << 24) |
|
||||
(ret[2] << 16) |
|
||||
(ret[1] << 8) |
|
||||
(ret[0] << 0);
|
||||
printf(" End at %d ",cur_page);
|
||||
} else {
|
||||
/* (nand_out->status)[i] = 0; */
|
||||
@ -351,12 +316,11 @@ int nand_program_check(struct nand_in_t *nand_in,
|
||||
(ret[0] << 0);
|
||||
printf(" End at %d ",cur_page);
|
||||
bad.start = (cur_page - 1) / hand.nand_ppb;
|
||||
if (cur_page % hand.nand_ppb==0)
|
||||
if (cur_page % hand.nand_ppb == 0)
|
||||
nand_markbad(&bad);
|
||||
}
|
||||
|
||||
}
|
||||
/* handle_Close(); */
|
||||
*start_page = cur_page;
|
||||
return 0;
|
||||
}
|
||||
@ -394,9 +358,7 @@ int nand_erase(struct nand_in_t *nand_in)
|
||||
unsigned short temp = ((i << 4) & 0xff0) + NAND_ERASE;
|
||||
usb_ingenic_nand_ops(&ingenic_dev, temp);
|
||||
|
||||
ingenic_dev.file_buff = ret;
|
||||
ingenic_dev.file_len = 8;
|
||||
usb_read_data_from_ingenic(&ingenic_dev);
|
||||
usb_read_data_from_ingenic(&ingenic_dev, ret, 8);
|
||||
printf(" Finish!");
|
||||
}
|
||||
/* handle_Close(); need to change */
|
||||
@ -425,7 +387,7 @@ int nand_program_file(struct nand_in_t *nand_in,
|
||||
struct nand_in_t n_in;
|
||||
struct nand_out_t n_out;
|
||||
|
||||
#if 0
|
||||
#ifdef CONFIG_NAND_OUT
|
||||
/* nand_out->status = (unsigned char *)malloc(nand_in->max_chip * sizeof(unsigned char)); */
|
||||
nand_out->status = status_buf;
|
||||
for (i=0; i<nand_in->max_chip; i++)
|
||||
@ -452,7 +414,7 @@ int nand_program_file(struct nand_in_t *nand_in,
|
||||
else
|
||||
n_in.length = flen / ((hand.nand_ps + hand.nand_os) * hand.nand_ppb) + 1;
|
||||
}
|
||||
/* printf(" length %d flen %d \n",n_in.length,flen); */
|
||||
/* printf("\n length %d flen %d ", n_in.length, flen); */
|
||||
n_in.cs_map = nand_in->cs_map;
|
||||
n_in.dev = nand_in->dev;
|
||||
n_in.max_chip = nand_in->max_chip;
|
||||
@ -469,7 +431,8 @@ int nand_program_file(struct nand_in_t *nand_in,
|
||||
printf("\n Total size to send in byte is :%d", flen);
|
||||
printf("\n Image type : %s", IMAGE_TYPE[nand_in->option]);
|
||||
printf("\n It will cause %d times buffer transfer.", m + 1);
|
||||
#if 0
|
||||
|
||||
#ifdef CONFIG_NAND_OUT
|
||||
for (i = 0; i < nand_in->max_chip; i++)
|
||||
(nand_out->status)[i] = 1; /* set all status to success! */
|
||||
#endif
|
||||
@ -490,7 +453,8 @@ int nand_program_file(struct nand_in_t *nand_in,
|
||||
if (start_page - nand_in->start > hand.nand_ppb)
|
||||
printf("\n Skip a old bad block !");
|
||||
nand_in->start = start_page;
|
||||
#if 0
|
||||
|
||||
#ifdef CONFIG_NAND_OUT
|
||||
for (i = 0; i < nand_in->max_chip; i++) {
|
||||
(nand_out->status)[i] = (nand_out->status)[i] * (n_out.status)[i];
|
||||
}
|
||||
@ -515,7 +479,8 @@ int nand_program_file(struct nand_in_t *nand_in,
|
||||
|
||||
if (start_page - nand_in->start > hand.nand_ppb)
|
||||
printf(" Skip a old bad block !");
|
||||
#if 0
|
||||
|
||||
#ifdef CONFIG_NAND_OUT
|
||||
for (i=0; i < nand_in->max_chip; i++) {
|
||||
(nand_out->status)[i] = (nand_out->status)[i] * (n_out.status)[i];
|
||||
}
|
||||
|
||||
@ -58,7 +58,9 @@ static int get_ingenic_interface(struct ingenic_dev *ingenic_dev)
|
||||
struct usb_interface *usb_if;
|
||||
int config_index, if_index, alt_index;
|
||||
|
||||
for (config_index = 0; config_index < ingenic_dev->usb_dev->descriptor.bNumConfigurations; config_index++) {
|
||||
for (config_index = 0;
|
||||
config_index < ingenic_dev->usb_dev->descriptor.bNumConfigurations;
|
||||
config_index++) {
|
||||
usb_config_desc = &ingenic_dev->usb_dev->config[config_index];
|
||||
|
||||
if (!usb_config_desc)
|
||||
@ -246,19 +248,20 @@ int usb_send_data_to_ingenic(struct ingenic_dev *ingenic_dev)
|
||||
fprintf(stderr, "Error - can't send bulk data to Ingenic CPU: %i\n", status);
|
||||
return -1;
|
||||
}
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
int usb_read_data_from_ingenic(struct ingenic_dev *ingenic_dev)
|
||||
int usb_read_data_from_ingenic(struct ingenic_dev *ingenic_dev, char *buff, int len)
|
||||
{
|
||||
int status;
|
||||
status = usb_bulk_read(ingenic_dev->usb_handle,
|
||||
/* endpoint */ INGENIC_IN_ENDPOINT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
||||
/* bulk data */ ingenic_dev->file_buff,
|
||||
/* bulk data length */ ingenic_dev->file_len,
|
||||
/* bulk data */ buff,
|
||||
/* bulk data length */ len,
|
||||
USB_TIMEOUT);
|
||||
if (status < ingenic_dev->file_len) {
|
||||
fprintf(stderr, "Error - can't send bulk data to Ingenic CPU: %i\n", status);
|
||||
if (status < len) {
|
||||
fprintf(stderr, "Error - can't read bulk data from Ingenic CPU: %i\n", status);
|
||||
return -1;
|
||||
}
|
||||
|
||||
@ -272,6 +275,7 @@ int usb_ingenic_upload(struct ingenic_dev *ingenic_dev, int stage)
|
||||
unsigned int stage2_addr;
|
||||
stage2_addr = total_size + 0x80000000;
|
||||
stage2_addr -= CODE_SIZE;
|
||||
|
||||
int stage_addr = (stage == 1 ? 0x80002000 : stage2_addr);
|
||||
|
||||
usb_send_data_address_to_ingenic(ingenic_dev, stage_addr);
|
||||
@ -294,15 +298,15 @@ int usb_ingenic_upload(struct ingenic_dev *ingenic_dev, int stage)
|
||||
USB_TIMEOUT);
|
||||
|
||||
if (status != 0) {
|
||||
fprintf(stderr, "Error - can't start the uploaded binary on the Ingenic device: %i\n", status);
|
||||
goto out;
|
||||
fprintf(stderr,
|
||||
"Error - can't start the uploaded binary on the Ingenic device: %i\n",
|
||||
status);
|
||||
return status;
|
||||
}
|
||||
|
||||
usb_get_ingenic_cpu(ingenic_dev);
|
||||
status = 1;
|
||||
|
||||
out:
|
||||
return status;
|
||||
return 1;
|
||||
}
|
||||
|
||||
void usb_ingenic_cleanup(struct ingenic_dev *ingenic_dev)
|
||||
|
||||
@ -71,7 +71,7 @@ int usb_send_data_to_ingenic(struct ingenic_dev *ingenic_dev);
|
||||
int usb_send_data_length_to_ingenic(struct ingenic_dev *ingenic_dev,
|
||||
int len);
|
||||
int usb_ingenic_nand_ops(struct ingenic_dev *ingenic_dev, int ops);
|
||||
int usb_read_data_from_ingenic(struct ingenic_dev *ingenic_dev);
|
||||
int usb_read_data_from_ingenic(struct ingenic_dev *ingenic_dev, char *buff, int len);
|
||||
|
||||
#endif /* __INGENIC_USB_H__ */
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user