xiangfu
3a841bc88c
add jz4750 code
2009-06-05 08:30:28 +00:00
xiangfu
c7346db1b6
add device_stage1 code
2009-06-05 08:20:06 +00:00
xiangfu
7cd119baeb
add fw.bin to the svn
2009-06-05 05:57:06 +00:00
xiangfu
3205485a50
delete the useless head file
2009-06-05 05:49:19 +00:00
xiangfu
6889fc0b3d
add openwrt r15323 patch
2009-06-02 04:39:05 +00:00
Paul Fertser
fd3fac5a54
GTA02: set battery full charging current threshold to 2/32*Ichg
...
In most conditions the charger is unable to detect battery full status
because gsm modem continiously draws current directly from the battery.
This makes it less sensitive and therefore will cutoff charging properly.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2009-06-01 21:33:34 -03:00
xiangfu
7f0f907bac
change the fread fseek ... to read. seek
2009-05-31 03:32:19 +00:00
Paul Fertser
141b2bedfc
Use different MACs for the host and for the device ends of usb link
...
This makes Qi consistent with current SHR boot script. It assigns
the MAC specified on the identity partition to the device and the
next address to the host, ie: from "g_ether.dev_addr=00:1F:11:01:58:67"
generate "g_ether.host_addr=00:1F:11:01:58:68".
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2009-05-28 20:06:51 -03:00
Paul Fertser
8089e8de8b
Added SDHC support
...
Implemented and tested on Josch's GTA01Bv4
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2009-05-26 22:11:17 -03:00
xiangfu
4c57b734eb
change some output info
2009-05-26 17:22:44 +00:00
xiangfu
bb5f4be354
change the hand point
2009-05-26 17:14:40 +00:00
xiangfu
b47ed72723
change the file_buf use the code_buf not malloc
2009-05-26 17:05:54 +00:00
xiangfu
132b7afd9c
change the sturct name
2009-05-20 08:13:10 +00:00
xiangfu
e7a23fd7b6
delete repeat code
2009-05-16 02:57:10 +00:00
xiangfu
470a2548f7
add device_stage1 folder
2009-05-15 05:00:58 +00:00
xiangfu
3977cdb120
add usb boot stage2 for device
2009-05-15 05:00:06 +00:00
xiangfu
6a07660a37
fix typo
2009-05-14 17:34:03 +00:00
xiangfu
63cbdd19c8
add a reflash shell
2009-05-14 17:12:48 +00:00
xiangfu
b5a4d70021
now the reflash function is work :-)
2009-05-14 17:11:03 +00:00
xiangfu
fe484a65ee
change usb_read_data_from_ingenic functio to take three argument
2009-05-14 09:15:11 +00:00
xiangfu
d66be487ab
add error_check function.
...
add usb_ingenic_configration
2009-05-12 14:41:52 +00:00
xiangfu
72dd61a7c7
modify the read data function and send length function
2009-05-08 16:14:14 +00:00
Dmitry Kurochkin
0ca1d89412
Bad magic when booting from NAND
...
Qi fails to boot from NAND. Qi booting from SD goes fine. Booting NAND
from NOR works as well.
I have found the problem. The error was because we check if the
current block is bad or the next one is bad. And skip the current
block even if only the next one is bad. This way we skip good block
before a bad one.
This patch fixes the bug.
Signed-off-by: Dmitry Kurochkin <dmitry.kurochkin@gmail.com>
2009-05-07 00:27:20 -05:00
xiangfu
7085493d7c
remove command_input function.
...
change nand_program_check not return page num.
2009-05-07 03:07:52 +00:00
xiangfu
ee5af659bf
add some comment
2009-05-04 16:08:03 +00:00
xiangfu
37327ca07f
add "-c" option to direct run command.
2009-05-04 15:57:06 +00:00
xiangfu
f7998e35b8
add nand_read function
2009-05-04 14:36:51 +00:00
xiangfu
7513e53951
add nand_program_check function
2009-05-03 15:33:56 +00:00
xiangfu
fac0cd77ea
add nand_ops function
2009-05-03 15:06:23 +00:00
xiangfu
acc365174f
add usb_send_data_address_to_ingenic,
...
usb_send_data_to_ingenic function.
2009-05-01 16:14:55 +00:00
xiangfu
b22c1f680e
make the -v -h work with normal user
2009-04-30 17:31:02 +00:00
xiangfu
a834e80362
-put all the configure file operation to ingenic.c
...
-change usb.c to ingenic_usb.c
-finish part of nprog command
-try to init the ingenic usb in main.c
-try to make code more clear.
2009-04-30 17:26:14 +00:00
xiangfu
dd263b67b9
add init hand function
...
add check nand configure
2009-04-30 07:18:44 +00:00
xiangfu
392d2bb3fc
add read nand configure
2009-04-30 07:06:33 +00:00
xiangfu
6082b4557d
now the nprog function can read the argument
2009-04-30 06:41:49 +00:00
xiangfu
5db3e003da
mv the COMMAND define to command_line.c
2009-04-30 06:12:38 +00:00
xiangfu
346f1528d6
change the fw_args_t , don't use typedef
2009-04-29 13:26:28 +00:00
xiangfu
60daa40873
add some define
2009-04-29 11:20:02 +00:00
xiangfu
6e4e15eb31
change cmd_boot.c to cmd.c, put all the command in this file.
...
add some struct nprog needs.
remove handle_help handle_exit function.
2009-04-29 07:25:12 +00:00
xiangfu
f93b8a829b
remove the usb-boot
2009-04-29 05:23:17 +00:00
xiangfu
c4b2faf24f
format the printf
2009-04-29 04:43:54 +00:00
xiangfu
c0eaa27e65
fix strcmp warning
2009-04-28 18:38:26 +00:00
xiangfu
1bfa9f79c0
add make clean.
...
now we can "make usb-boot" to get all usb-boot needs.
*now we must put "fw.bin", "usb_boot.bin" and "inflash" in the same directory
2009-04-28 18:32:37 +00:00
xiangfu
98a477152f
update Makefile and README
...
fix compile error. ZZy
2009-04-28 18:22:12 +00:00
xiangfu
e0de52c28c
cleanup the code
...
change all the function return 1 for success
2009-04-28 18:13:19 +00:00
xiangfu
1275a789b7
command_input return 0 means correct
2009-04-28 17:22:07 +00:00
xiangfu
4c7da19fb5
add README
2009-04-28 17:12:50 +00:00
xiangfu
f83f34e76b
add command line
2009-04-28 17:07:43 +00:00
xiangfu
46f40dbfa6
split main.c to cmd_boot.c and main.c
2009-04-28 15:57:53 +00:00
xiangfu
7a4d062a79
add clean backup file
2009-04-28 15:56:32 +00:00
