1
0
mirror of git://projects.qi-hardware.com/xburst-tools.git synced 2024-11-23 04:42:27 +02:00
xburst-tools/nandboot/include/jz4730_board.h
Xiangfu Liu 056ecbbe29 -add nandboot to xburst-tool
-nandboot load the zImage kernel

Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
2009-07-01 10:53:48 +08:00

53 lines
1.5 KiB
C

/*
* jz4730_board.h
*
* JZ4730 board definitions.
*
* Copyright (c) 2005-2008 Ingenic Semiconductor Inc.
*
*/
#ifndef __JZ4730_BOARD_H__
#define __JZ4730_BOARD_H__
/*-------------------------------------------------------------------
* Frequency of the external OSC in Hz.
*/
#define CFG_EXTAL 12000000
/*-------------------------------------------------------------------
* CPU speed.
*/
#define CFG_CPU_SPEED 336000000
/*-------------------------------------------------------------------
* Serial console.
*/
#define CFG_UART_BASE UART3_BASE
#define CONFIG_BAUDRATE 9600
/*-------------------------------------------------------------------
* SDRAM info.
*/
// SDRAM paramters
#define CFG_SDRAM_BW16 0 /* Data bus width: 0-32bit, 1-16bit */
#define CFG_SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
#define CFG_SDRAM_ROW 13 /* Row address: 11 to 13 */
#define CFG_SDRAM_COL 9 /* Column address: 8 to 12 */
#define CFG_SDRAM_CASL 2 /* CAS latency: 2 or 3 */
// SDRAM Timings, unit: ns
#define CFG_SDRAM_TRAS 45 /* RAS# Active Time */
#define CFG_SDRAM_RCD 20 /* RAS# to CAS# Delay */
#define CFG_SDRAM_TPC 20 /* RAS# Precharge Time */
#define CFG_SDRAM_TRWL 7 /* Write Latency Time */
#define CFG_SDRAM_TREF 7812 /* Refresh period: 8192 refresh cycles/64ms */
/*-------------------------------------------------------------------
* Linux kernel command line.
*/
#define CFG_CMDLINE "mem=32M console=ttyS0,57600n8 ip=off rootfstype=yaffs2 root=/dev/mtdblock2 rw init=/etc/inittab"
#endif /* __JZ4730_BOARD_H__ */