mirror of
git://projects.qi-hardware.com/xburst-tools.git
synced 2025-01-22 21:11:05 +02:00
a3a38cabf1
It solves the problem that the progress bar in reflash_ben.sh is buffered and updated in bigger pieces. With this patch in place, reflash_ben.sh runs nice and smooth
*
* usbboot
*
* Utility to respond to the Ingenic XBurst USB boot protocol, provide
* initial boot stages and ability to access NAND on device.
*
Authors: Ingenic Semiconductor, Inc.
Xiangfu Liu <xiangfu@sharism.cc>
Marek Lindner <lindner_marek@yahoo.de>
Wolfgang Spraul <wolfgang@sharism.cc>
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version
3 of the License, or (at your option) any later version.
usbboot is the Linux version and rewrite of a Windows utility from Ingenic also called usbboot.
Homepage: http://www.ingenic.cn/eng/productServ/kfyd/compiler/pffaqContents.aspx#questionAnchor8
Windows Binary: ftp://ftp.ingenic.cn/3sw/00tools/usb_boot/tools/usbboot1.4b-tools.zip
Windows Sources: ftp://ftp.ingenic.cn/3sw/00tools/usb_boot/tools/usbboot1.4b-sources.zip
Manual: ftp://ftp.ingenic.cn/3sw/00tools/usb_boot/manual/USB_Boot_Tool_Manual_1.4_EN.pdf
Build Requirements: libusb-dev, libconfuse-dev
Build and Installation:
cd ../
./autogen.sh
./configure --enable-firmware --prefix=/usr
make
make install
*) make install will install the 'usbboot' binary to /usr/bin/usbboot,
the stage 1 and 2 bootloaders to /usr/share/xburst-tools/,
usbboot.cfg configuration file into /etc/xburst-tools.
Examples:
sudo usbboot (invoking usbboot without options will let you enter commands at the usbboot prompt)
sudo usbboot -c "boot"
sudo usbboot -c "nprog 0 u-boot-nand.bin 0 0 -n"