mirror of
git://projects.qi-hardware.com/xburst-tools.git
synced 2024-11-25 22:39:42 +02:00
35 lines
1.9 KiB
INI
35 lines
1.9 KiB
INI
# Configuration variables:
|
|
# STAGE1_FILE, STAGE2_FILE
|
|
|
|
set STAGE1_FILE firmware/spl_stage1.bin
|
|
set STAGE2_FILE firmware/spl_stage2_usb.bin
|
|
|
|
set EXTCLK 12 # Define the external crystal in MHz
|
|
set CPUSPEED 252 # Define the PLL output frequency
|
|
set PHMDIV 3 # Define the frequency divider ratio of PLL=CCLK:PCLK=HCLK=MCLK
|
|
set BAUDRATE 57600 # Define the uart baudrate
|
|
set USEUART 0 # UART number
|
|
|
|
set SDRAM_BUSWIDTH 16 # The bus width of the SDRAM in bits (16|32)
|
|
set SDRAM_BANKS 4 # The bank number (2|4)
|
|
set SDRAM_ROWADDR 13 # Row address width in bits (11-13)
|
|
set SDRAM_COLADDR 9 # Column address width in bits (8-12)
|
|
set SDRAM_ISMOBILE 0 # Define whether SDRAM is mobile SDRAM (only or Jz4750), 1: yes 0: no
|
|
set SDRAM_ISBUSSHARE 1 # Define whether SDRAM bus share with NAND 1:shared 0:unshared
|
|
|
|
set NAND_BUSWIDTH 8 # The width of the NAND flash chip in bits (8|16|32)
|
|
set NAND_ROWCYCLES 3 # The row address cycles (2|3)
|
|
set NAND_PAGESIZE 2048 # The page size of the NAND chip in bytes(512|2048|4096)
|
|
set NAND_PAGEPERBLOCK 128 # The page number per block
|
|
set NAND_FORCEERASE 1 # The force to erase flag (0|1)
|
|
set NAND_OOBSIZE 64 # OOB size in byte
|
|
set NAND_ECCPOS 3 # Specify the ECC offset inside the oob data (0-[oobsize-1])
|
|
set NAND_BADBLOCKPOS 0 # Specify the badblock flag offset inside the oob (0-[oobsize-1])
|
|
set NAND_BADBLOCKPAGE 0 # Specify the page number of badblock flag inside a block(0-[PAGEPERBLOCK-1])
|
|
set NAND_PLANENUM 1 # The planes number of target nand flash
|
|
set NAND_BCHBIT 8 # Specify the hardware BCH algorithm for 4750 (4|8)
|
|
set NAND_WPPIN 0 # Specify the write protect pin number
|
|
set NAND_BLOCKPERCHIP 4096 # Specify the block number per chip,0 means ignore
|
|
|
|
rebuildcfg
|