1
0
mirror of git://projects.qi-hardware.com/xburst-tools.git synced 2024-11-22 23:21:53 +02:00
xburst-tools/qiboot/include/glamo-mmc.h
Andy Green fdd6c5544b add-glmo-mmc.patch
Moves various .h into include from drivers
Gets glamo-mmc.h working so we can detect
card ID / Size if the card is plugged in.

Adds FAT / MMC kernel source entry for GTA02 that
is first before the NAND one.  When it works it will
favour to boot off SD Card if a kernel is found there, but
right now we don't have a working filesystem parser and
partition handling hooked up.

Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-28 10:16:37 +00:00

150 lines
5.9 KiB
C

#ifndef __GLAMO_MMC_H__
#define __GLAMO_MMC_H__
/* Standard MMC commands (4.1) type argument response */
/* class 1 */
#define MMC_GO_IDLE_STATE 0 /* bc */
#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */
#define MMC_ALL_SEND_CID 2 /* bcr R2 */
#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
#define MMC_SET_DSR 4 /* bc [31:16] RCA */
#define MMC_SWITCH 6 /* ac [31:0] See below R1b */
#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
#define MMC_SEND_EXT_CSD 8 /* adtc R1 */
#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */
#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */
#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
#define MMC_STOP_TRANSMISSION 12 /* ac R1b */
#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */
#define MMC_SPI_READ_OCR 58 /* spi spi_R3 */
#define MMC_SPI_CRC_ON_OFF 59 /* spi [0:0] flag spi_R1 */
#define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */
#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */
/* class 2 */
#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */
#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */
#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */
/* class 3 */
#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
/* class 4 */
#define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */
#define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */
#define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */
#define MMC_PROGRAM_CID 26 /* adtc R1 */
#define MMC_PROGRAM_CSD 27 /* adtc R1 */
/* class 6 */
#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
#define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */
/* class 5 */
#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
#define MMC_ERASE 38 /* ac R1b */
/* class 9 */
#define MMC_FAST_IO 39 /* ac <Complex> R4 */
#define MMC_GO_IRQ_STATE 40 /* bcr R5 */
/* class 7 */
#define MMC_LOCK_UNLOCK 42 /* adtc R1b */
/* class 8 */
#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */
#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
#define SD_APP_SEND_NUM_WR_BLKS 22 /* adtc R1 */
#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */
#define SD_APP_SEND_SCR 51 /* adtc R1 */
#define MMC_RSP_PRESENT (1 << 0)
#define MMC_RSP_136 (1 << 1) /* 136 bit response */
#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
#define MMC_CMD_MASK (3 << 5) /* non-SPI command type */
#define MMC_CMD_AC (0 << 5)
#define MMC_CMD_ADTC (1 << 5)
#define MMC_CMD_BC (2 << 5)
#define MMC_CMD_BCR (3 << 5)
#define MMC_RSP_SPI_S1 (1 << 7) /* one status byte */
#define MMC_RSP_SPI_S2 (1 << 8) /* second byte */
#define MMC_RSP_SPI_B4 (1 << 9) /* four data bytes */
#define MMC_RSP_SPI_BUSY (1 << 10) /* card may send busy */
/*
* These are the native response types, and correspond to valid bit
* patterns of the above flags. One additional valid pattern
* is all zeros, which means we don't expect a response.
*/
#define MMC_RSP_NONE (0)
#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
#define MMC_RSP_R4 (MMC_RSP_PRESENT)
#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define mmc_resp_type(f) ((f) & (MMC_RSP_PRESENT | MMC_RSP_136 | MMC_RSP_CRC |\
MMC_RSP_BUSY | MMC_RSP_OPCODE))
#define mmc_cmd_type(f) ((f) & MMC_CMD_MASK)
/*
* These are the SPI response types for MMC, SD, and SDIO cards.
* Commands return R1, with maybe more info. Zero is an error type;
* callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
*/
#define MMC_RSP_SPI_R1 (MMC_RSP_SPI_S1)
#define MMC_RSP_SPI_R1B (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
#define MMC_RSP_SPI_R2 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
#define MMC_RSP_SPI_R3 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
#define MMC_RSP_SPI_R4 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
#define MMC_RSP_SPI_R5 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
#define MMC_RSP_SPI_R7 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
#define MMC_DATA_WRITE (1 << 8)
#define MMC_DATA_READ (1 << 9)
#define MMC_DATA_STREAM (1 << 10)
struct sd_cid {
char pnm_0; /* product name */
char oid_1; /* OEM/application ID */
char oid_0;
u8 mid; /* manufacturer ID */
char pnm_4;
char pnm_3;
char pnm_2;
char pnm_1;
u8 psn_2; /* product serial number */
u8 psn_1;
u8 psn_0; /* MSB */
u8 prv; /* product revision */
u8 crc; /* CRC7 checksum, b0 is unused and set to 1 */
u8 mdt_1; /* manufacturing date, LSB, RRRRyyyy yyyymmmm */
u8 mdt_0; /* MSB */
u8 psn_3; /* LSB */
};
enum card_type {
CARDTYPE_NONE = 0,
CARDTYPE_MMC,
CARDTYPE_SD,
CARDTYPE_SD20,
CARDTYPE_SDHC
};
#endif /* __GLAMO_MMC_H__ */