This caused 800x600 images to be cut off, because the line length is
not a multiple of 64 bytes.
- ubb-vga.c (session): make the allocation a multiple of the DMA
transfer size
- ubb-vga.c (line): round number of transfers up instead of down
- ubb-vga.c (mode_db): line duration of 800x600/54 was a bit to short
- ubb-vga.c (line): send a 0 word at the end of the line, to avoid
overscan (we use PIO to synchronize with CPU timing)
- ubb-vga.c (mode_db): updated line length of 640x480 resolutions for
correct termination
- ubb-vga.c (KEY_MASK): KEYINx lines on port D
- ubb-vga.c (session): run until keypress if the number of frames is
zero
- ubb-vga.c (main): set frames to zero if omitted
This is tricky: if we just make "mode" global, the whole timing may
fall apart, with the DMA locking up. So let's take small bisectable
steps to get there ...
- ubb-vga.c (struct mode), ubb-vga.h: moved mode entry declaration to
ubb-vga.h
- ubb-vga.c (mode_db): moved up
- tstimg.c (printc): added diagonal to '0' (zero) to distinguish it from
'O' (oh)
- tstimg.c (printc): added "nose" to '1' to better distinguish it from
'I'
- tstimg.c (printc): completed the alphabet
- tstimg.c (printc): added '.' character
- ubb-vga.c (setup_noirq, line): moved DMA channel command setting to
per-session setup
- ubb-vga.c (setup_noirq, line): moved DMA request type setting to
per-session setup
- ubb-vga.c (line): added commend that the target address needs to be
set for each transfer, even if it doesn't change
Note that DMA is very sensitive to the video timing. At the moment,
only 800x600 mode works without locking up the DMA controller.
- ubb-vga.c (DMA, setup_noirq, cleanup_noirq, line): replaced MMC PIO
with DMA
- ubb-vga.c (frame): pass physical addresses to "line"
- ubb-vga.c (frame): detect if the DMA controller is stuck
- ubb-vga.c (ben_setup): use REG_WINDOW instead of calculating the
window size
- ubb-vga.c (PAGE_SIZS): we no longer need it - removed
- ubb-vga.c (line): shift bus width setting in MSC_CMDAT by the field
position, not the bit position
- ubb-vga.c (line): moved comment detailing the search for the
adjustment value to the mode database, so that we don't clutter
this function
- regs4740.h (REG_PADDR): translate a register access to the
corresponding physical address
- regs4740.h (REG_WINDOW): added register window size
- regs4740.h (CGU, INT, TCU, GPIO, MSC): prefix register group macros
with an underscore, to avoid name collision with DMAC
- regs4740.h: added DMAC registers
- regs4740.h (MSC_NOP): should be MSC_NOB
- physmem.c (calloc_phys_vec): malloc the vector instead of sbrk'ing it
- ubb-vga.h (xlat_virt), physmem.c (xlat_one, xlat_virt): translate a
vector of virtual addresses to physical addresses
- physmem.c (align_sbrk): align the end of the data segment
- physmem.c (calloc_phys_vec): align the line pointer vector to a machine
word, just in case
- physmem.c (calloc_phys_vec): crudely align the line buffers within
pages, to avoid page-crossing within a line (yes, this does reduce
noise)
The indirection introduced with the non-contiguous frame buffer caused
significant horizontal distortions. We can compensate for them by
starting the timer before loading the line pointer and calling "line".
- ubb-vga.h (calloc_phys_vec), physmem.c: non-contiguous memory allocator
(for now, without really considering any mapping to physical memory)
- Makefile (OBJS): added physmem.o
- ubb-vga.h (grabfb), grabfb.c (grabfb): API change for non-contiguous
frame buffer
- ubb-vga.h (ppmimg), ppmimg.c (convert, ppmimg): API change for
non-contiguous frame buffer
- ubb-vga.h (tstimg), tstimg.c (pixel, color_bars, grill, grid, sides,
dot, line45, arc, printc, text, ctext, tstimg): API change for
non-contiguous frame buffer
- tstimg.c (tstimg): we no longer need to clear the frame buffer
- ubb-vga.c (frame, session, main): use a vector of line buffers instead
of a contiguous frame buffer
- ubb-vga2.c (XREs, YRES, res, res_db, setup, line, hdelay, frame,
session): replaced hard-coded display characteristics with a mode
database
- ubb-vga2.c (usage, main): new option -m to select the display mode
- ubb-vga2.c (session): allocate frame buffer dynamically
- ubb-vga2.c (session): since we no longer prefetch, we don't need to
allocate space beyond the end of the frame buffer
- ubb-vga2.c (line): resurrected "quick load" and extended it to fill the
FIFO completely
- regs4740.h: macros to access selected Jz4740 registers
- ubb-vga2.c: replaced all pointers to registers with access macros
- ubb-vga2.c (line_cycles): we now seem to be 0.1 us slower
- ubb-vga2.c (line): write the first word to the TX FIFO after starting
the command or it is lost
- ubb-vga2.c (line): fetch the first word while waiting for the back
porch, making sure we have plenty of time for cache effects
- ubb-vga2.c (line): we no longer need to prefetch the first word of
the next line
- ubb-vga.h (ccube_init, ccube_map), ccube.c: color mapper based on
proximity in color cube
- grabfb.c (pattern, grabfb), ppmimg.c (pattern, convert): use the color
cube mapper instead of inferios threshold-based mapping
- ubb-vga2.c (session): initialize the color cube
- ubb-vga.h (thres), grabfb.c (thres), ubb-vga2.c (usage, main): removed
the threshold along with the option (-l) to set it
- Makefile (OBJS): added ccube.o
- Makefile (OBJS): added ppm.o and ppmimg.o
- ppm.h (load_ppm), ppm.c: PPM file loader, adapted from
eda-tools/schhist/ppmdiff/ppmdiff.c
- ubb-vga.h (img_name, ppmimg), ppmimg.c: PPM image to frame buffer
converter
- ubb-vga2.c (usage, main): the threshold is now set with the option -l
- ubb-vga2.c (usage, main): if a second argument is given, treat it as
a PPM file
- ubb-vga2.c (usage): also documented option -t
- tstimg.c: test image generator
- Makefile (OBJS): added tstimg.o
- Makefile (LDFLAGS): tstimg.c needs libm
- ubb-vga2.c (session, main): pass image generator as a function pointer
- ubb-vga2.c (main): new option -t to select the test image generator
- ubb-vga2.c (session, grab): made the frame buffer "void *" and pass
frame buffer resolution
- ubb-vga.h: color encoding and items shared between compilation units
- ubb-vga2.c (thres, pattern, grab), grabfb.c: move to grabfb.c
- ubb-vga2.c (map): make global, for use by grabfb.c
- ubb-vga2.c (pick, pattern, tricolor, grid): removed obsolete test
image generators
- Makefile (OBJS, ubb-vga2): added grabfb.o
- Makefile (clean): remove only .o files
- Makefile (spotless): remove only executables
- ubb-vga2.c (frame, grab, session): keep all 480 lines in the frame
buffer instead of duplicating them on output
- ubb-vga2.c (bad): make "static"
- ubb-vga2.c (session, main): removed the "single" argument
- ubb-vga2.c (main): complain about timeouts only if any occurred
- ubb-vga.sch: use resistive divider instead of diodes
- ubb-vga.sch, ubb-vga.c (VSYNC): moved VSYNC from DAT3 to CLK to make
all MMC data lines available for pixel data
- ubb-vga.sch, ubb-vga.c (R): moved red from DAT2 to DAT3 for convenient
access to the 4th channel
- ubb-vga.sch: added luminance (Y) channel
- ubb-vga.sch: added pull-down to HSYNC/CMD, for later use with the MMC
controller
- ubb-vga.c (pdfuns, pdfunc, ben_setup, setup): make UBB signals GPIOs,
in case someone left them in a different configuration
- README: added compatibility of double mode
- ubb-vga.c (usage, main): new option -d to double the number of set/clear
pairs (making lines longer and the apparent pixel clock slower)
- ubb-vga.c (grab, session, main): have a complete set/clear pair for each
pixel in double mode
