We need explicit rules to compile lex.yy.c and y.tab.c for the relaxed
CFLAGS. However, this means that the implicit rule was not used and
therefore no dependencies were generated.
- Makefile (UPLOAD), README, debian/control (Homepage, Description),
fped.1: the GUI page is now on downloads.qi-hardware.com instead
of people.openmoko.org
- debian/copyright, fped.1: changed e-mail from werner@openmoko.org
to werner@almesberger.net
- README: changed repository from Openmoko SVN to Qi-Hardware git
- Makefile (CFLAGS): renamed cpp macro SVN_VERSION to VERSION
- Makefile (SVN_VERSION, SVN_STATUS): renamed to GIT_VERSION and
GIT_STATUS and switched to corresponding git command
- Makefile (.PHONY, update): removed this little-used target
the Debian package is need DESTDIR and Debian also install binary
to /usr/bin/
Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc>
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5982 99fdad57-331a-0410-800a-d7fa5415bdb3
this can reduce warning "svn: '.' is not a working copy"
when we not in a svn repo.
Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc>
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5980 99fdad57-331a-0410-800a-d7fa5415bdb3
cores.
- test/structure, test/del_vec, test/frame_ref, test/meas_qual, test/del_frame:
added newline after "unit" directive (reported by Xiangfu Liu)
- test/Common: new function expect_sed for post-processing of test output
- test/tsort: use expect_sed to ignore "(core dumped") after "Aborted"
- test/Common: if there is a file called "core", don't run it
- Makefile (clean): remove test/core
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5978 99fdad57-331a-0410-800a-d7fa5415bdb3
using frames to encapsulate building blocks, e.g., like macros or functions in
a programming language. Since measurements only know about the frame containing
a vector but not the frames containing that frame, invocations of this frame
from different places can only be distinguished within the min/next/max scheme.
(See the example in README.)
To eliminate this limitation, one needs a way to tell fped to consider a point
only if it has been instantiated through a certain path, e.g., by requiring
some other frames to be visited in its instantiation. This increases the number
of distinct points available for measurements.
The mechanism chosen is to qualify a measurement point with frames that lead to
it. This list of outer frames does not have to include all frames. Without
qualifying, the old behaviour results.
Note that this doesn't cover all possible ways in which a point can appear in
different roles. Multiple frame references can also result from repeating the
same frame reference in the same parent frame. The current qualification
mechanism does not allow such paths to be distinguished. However, one can
always introduce intermediate frames for this purpose.
Furthermore, repetitions create multiple instances of a point, although in what
should be considered the same role.
- fpd.l: make scanner support free-format a little better by switching back to
keyword mode after frame braces. This way, one can write a simple frame in a
single line, which is useful for regression tests.
- fpd.l, fpd.y, README, test/dbg_meas: added %meas directive to print the
result of a measurement
- fpd.y, README: measurements can now be labeled. Note that, due to limitations
of the grammar, the first measurement cannot be labeled.
- error.h, error.c (yywarn): new function for non-fatal diagnostics that always
get reported to standard error
- bitset.h, bitset.c: functions to manipulate variable-size bit sets
- meas.h, fpd.y, README, test/meas_qual: added the means to specify qualifiers
for points used in measurements
- dump.c (print_meas_base, print_meas): dump qualifiers
- delete.c (delete_references, test/del_frame): delete measurements that
reference a frame being deleted in their qualifiers
- obj.h, obj.c (enumerate_frames, instantiate): enumerate all frames so that we
have an index into the bit vector of visited frames
- meas.h, meas.c (reset_samples, meas_post), obj.c (generate_vecs,
generate_frame, instantiate): record the set of frames visited for each
sample
- meas.c (meas_post): only treat two instances of a point as equivalent if the
set of frames visited of one of them is a superset of set of the other. In
this case, keep the union of the two sets.
- meas.h, meas.c (meas_find_min, meas_find_next, meas_find_max),
test/meas_qual: instantiate_meas_pkg only select points for which all frames
in the qualification have been visited
- gui_meas.c (is_min, is_next, is_max, is_a_next): updated for above change
- inst.h, inst.c (curr_frame, propagate_bbox, add_inst, inst_begin_frame,
inst_end_frame, inst_start): renamed curr_frame to frame_instantiating to
avoid clash with curr_frame in fpd.y
- inst.h, inst.c (find_meas_hint): make global
- test/structure, test/del_vec, test/del_frame: fped now warns if a measurement
is in an unlinked frame. Changed regressions tests to avoid this warning.
- test/Common: new function expect_grep to compare only part of the output
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5967 99fdad57-331a-0410-800a-d7fa5415bdb3
found in the process. Also taught the regression test system a new trick: the
path to "fped" can be passed in the environment variable FPED. E.g.,
FPED=fped.r5943 make test
- fped.c (usage, main): duplicating the -T option produces a dump to stdout
before exiting (like %dump would)
- test/Common: new command fped_dump to invoked fped with a second -T option
- test/Common: if the environment variable FPED is set, use its content to
invoke fped (default is ../fped)
- test/Common: if the environment variable CWD_PREFIX is set, prepend it to
$FPED if the latter is a relative path
- Makefile (test, tests): set CWD_PREFIX to .., so that the path given in FPED
is valid at the point of invocation
- fpd.y: revised grammar to make "package" optional
- fpd.y: measurements were syntactically allowed inside non-root frame
(test/structure)
- test/structure: test various combinations of the grammatical file structure
- test/tsort: removed all the now unnecessary "package" directives
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5944 99fdad57-331a-0410-800a-d7fa5415bdb3
the topological sort. "make test" or "make tests" invokes the regression tests,
"make valgrind" runs them under valgrind's watchful eyes.
- fped.c (usage, main): added option -T to force batch mode (for regression
testing)
- Makefile, test/Common: added regression test infrastructure
- test/tsort: test cases for the topological sort
- README: added pointer to test/tsort
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5943 99fdad57-331a-0410-800a-d7fa5415bdb3
- overlap.c (inside, test_overlap): check for instance type
- overlap.c (inside, test_overlap): support hole instances
- README: put a pointer to the GUI description at the beginning
- README, gui.html: documented role and creation of holes
- inst.h: holes can now link to pads and vice versa
- hole.c, obj.c (instantiate): connect holes with pads and apply consistency
checks
- postscript.c: added output for holes
- icons/hole.fig: make hatched surroundings of hole look more round
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5940 99fdad57-331a-0410-800a-d7fa5415bdb3
infrastructure for hole objects. (Postscript and KiCad output are still
missing, and so does sanity checking.)
- gui_tool.c (new_obj_unconnected): set obj->name to NULL
- added hole objects to tool bar, all the various GUI routines, the .fpd
parser, and the .fpd dumper
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5939 99fdad57-331a-0410-800a-d7fa5415bdb3
documentation.
- Makefile, icons/frame_locked.fig, icons/frame_ready.fig: removed the icons of
locked and ready frames
- gui_tool.c: removed the frame tool and all the image handling associated with
it, leaving only the bits in place that are used by frame to canvas dragging
- gui_tool.h, gui_tool.c (tool_frame_update, tool_frame_deleted), gui_canvas.c
(key_press_event), gui_frame.c (popup_del_frame, select_frame): removed
the notifications of frame changes
- gui.html: removed the old clumsy frame reference procedure and described the
new way
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5937 99fdad57-331a-0410-800a-d7fa5415bdb3
a column, drag the variable or any of its values and drag horizontally. To move
a row, drag one of its value vertically.
- gui_frame.c (table_var_select_event, table_value_select_event): return FALSE
if dragging is possible
- gui_frame.c (build_table), gui_frame_drag.h, gui_frame_drag.c, Makefile:
support for rearranging tables using Gtk's drag and drop mechanism
- TODO: two items less
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5929 99fdad57-331a-0410-800a-d7fa5415bdb3
Measurement lines now have a fixed size, so they can't scale to invisibility.
- Makefile: don't pass CFLAGS twice when making dependencies
- postscript.c (postscript): moved iteration over packages to new function
ps_for_all_pkg, for sharing with postscript_fullpage
- postscript.c (postscript_fullpage): print all packages
- postscript.c (ps_meas): use real size for measurement lines
- postscript.c (PS_MEAS_LINE): changed measurement line width from 0.015 scaled
mm to 0.1 real mm
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5851 99fdad57-331a-0410-800a-d7fa5415bdb3
quite a bit. We now use per-file granularity for dependencies, reducing the
overhead by about a factor of 30.
- Makefile: generate per-file dependencies (.d) when compiling, based on
http://scottmcpeak.com/autodepend/autodepend.html
- Makefile: "depend" target is no longer used
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5850 99fdad57-331a-0410-800a-d7fa5415bdb3
- Makefile: pass SVN version and commit status to CPP
- gui.c (gui_main): show SVN revision in the title bar, if available
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5845 99fdad57-331a-0410-800a-d7fa5415bdb3
This often caused accidental builds without proper dependencies.
- Makefile: include .depend also if it doesn't exist yet. This way, GNU make
will build it and all is fine.
- Makefile: use "-include" instead of "include" to avoid unnecessary nagging
- Makefile: make .depend depend on *.h and *.c, so that we catch all changes
that _might_ affect the dependencies (this is a little inefficient but better
safe than sorry)
- README: "make dep" is no longer needed
- TODO: added thoughts for more improvements
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5774 99fdad57-331a-0410-800a-d7fa5415bdb3
- Makefile: use PID in temporary file name in PPM to XPM conversion, so that we
don't get mysterious failures in parallel builds
- gui_util.c (debug_save_pixbuf, debug_save_widget): helper functions to debug
pixbuf and widget content
- Makefile: added target "montage" to show the images recorded with
debug_save_pixbuf and debug_save_widget
- gui_over.c: when debugging, record the saves pixbuf in files
- gui_tool.c (tool_hover): removed unnecessary initialization
- added infrastructure for tooltips on the canvas (doesn't work properly yet)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5769 99fdad57-331a-0410-800a-d7fa5415bdb3
blends in and won't be mistaken for a button.
- Makefile: generate icon XPMs with transparent background
- gui_util.c (make_image): set transparency color to white
- gui_util.c (make_transparent_image): new function to return a transparent
image created from an XPM
- gui_tool.c (get_icon_by_inst): make the returned image transparent instead of
opaque
- icons/vec.fig, icons/arc.fig, icons/line.fig, icons/rect.fig, icons/circ.fig:
darkened to increase contrast on grey background
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5758 99fdad57-331a-0410-800a-d7fa5415bdb3
the solder mask with lines.
- gui_inst.c: draw solder mask with lines, not with filled rectangles and arcs
- gui_style.c: increase line width for solder mask from 1 to 2 pixels
- Makefile: added manual/concept-inst.png (forgot to commit this before)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5696 99fdad57-331a-0410-800a-d7fa5415bdb3
make adjustments when removing layers provided by specialized pads
- gui_inst.c: moved gc construction from gui_draw_pad and gui_draw_rpad to
shared pad_gc
- layer.h: new home of all definitions related to pads and layers
- layer.c:
- overlap.c: functions to test for overlaps of pad shapes (in progress)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5634 99fdad57-331a-0410-800a-d7fa5415bdb3
- convert icons in the manual from XPM to PNG so that Firefox can display them
too
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5534 99fdad57-331a-0410-800a-d7fa5415bdb3
last count
- loop iterations now show the actual value, not the zero-based iteration
number
- gui.html: added a GUI manual (in progress)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5531 99fdad57-331a-0410-800a-d7fa5415bdb3
- .fpd file format: new directive "unit" to set the default unit
- new selection was too aggressive - make it only rearrange settings if we also
fail the second vector search
- gui_draw_pad_text: calculation of height vs. width lost too much precision,
causing pad text to be rotated arbitrarily
- drag_new_vec: display distance in mil if unit is mil
- end_new_raw_vec: store distance in mil if unit is mil
- gridify: use a 10 mil grid if unit is mil
- ps_hline: corrected gsave/grestore mismatch
- Makefile: made "all" a prerequisite of "install"
- Postscript output now mentions the default unit (if set)
- ps_package: height and width were swapped, oopsie !
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5525 99fdad57-331a-0410-800a-d7fa5415bdb3
- Makefile: use PIPESTATUS to catch errors in the icon conversion pipe
- Makefile: whitespace and comment cleanup
- gui_style.c: removed no longer needed definition of INVALID
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5487 99fdad57-331a-0410-800a-d7fa5415bdb3
- postscript.c: added patterns backhatchpath and crosspath (for pad overlaid
with solder paste)
- postscript.c: added measurements
- postscript.c: prefixed style parameters with PS_ to avoid future conflicts
with gui_style.h
- when changing the default unit, we now cancel the selection, and refresh
canvas and current position
- on-screen measurements now suppress the unit if set to anything but "auto"
- use __attribute__((format(printf, ...))) for printf-like functions
- the unit selector now has a white background to make it clearer that it can
be clicked
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5461 99fdad57-331a-0410-800a-d7fa5415bdb3
- Makfile: added "install" and "uninstall" targets
- when deleting the currently active frame reference, reset active_ref of the
frame, so that it can be set to a new value later
- during instantiation, circles were classified as arcs
- end point of KiCad circle didn't mirror the Y axis
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5457 99fdad57-331a-0410-800a-d7fa5415bdb3
- added unit status and selection (in lower right corner)
- added automatic unit selection
- pointer coordinates are now shown with their unit
- updated display of X, Y, width, offset, and radius for unit selection
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5454 99fdad57-331a-0410-800a-d7fa5415bdb3
- objects are now deleted by selecting them, then clicking on the delete icon
- removed tool_ops.click, which was only there because of delete
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5419 99fdad57-331a-0410-800a-d7fa5415bdb3
the frame name when auto-generating them
- moved file I/O from gui.c to file.c
- ps_line used the wrong endpoint coordinate
- option -k makes fped write KiCad non-interactively
- option -p makes fped write Postscript non-interactively
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5418 99fdad57-331a-0410-800a-d7fa5415bdb3
leave an empty/corrupt main file if we crash during saving
- started adding Postscript output
- renamed "Save as KiCad" to "Write KiCad"
- switched from "manual" menu bar creation to GtkItemFactory
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5417 99fdad57-331a-0410-800a-d7fa5415bdb3
- when saving a file, we now make a backup of any existing file with the same
name
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5416 99fdad57-331a-0410-800a-d7fa5415bdb3
- moved make_image from gui_tool.c to into gui_util.c as well
- generalized set_frame_image and moved it to gui_util.c as set_image
- tool_button_press_event didn't check which button was pressed
- added buttons to switch visibility of frames, vectors, and measurements
- when creating a measurement through the GUI, don't invert if both points are
minima (otherwise, one could never get the text point the other way)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5411 99fdad57-331a-0410-800a-d7fa5415bdb3
- moved measurement operations from gui_tools.c to new file gui_meas.c
- added support for creating new-style measurements through the GUI
- the offset is optional in new-style expressions
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5407 99fdad57-331a-0410-800a-d7fa5415bdb3
draw_ctx, moved it to gui_util.c, and made it a global variable
- moved drawing logic for hovering and dragging into dedicated state machine
in gui_over.c
- hovering now uses a pixmap to restore the background instead of redrawing
- moved hover drawing functions from gui_inst.c to gui_tools.c
- made hover circle thicker
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5405 99fdad57-331a-0410-800a-d7fa5415bdb3
- increased default window size for make room for new icons
- switch the canvas to dark blue when instantiation fails
- modularized point lookup logic of instantiate_meas
- added highlight mode (on-going)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5404 99fdad57-331a-0410-800a-d7fa5415bdb3
- we didn't dehover before deleting, which could cause a crash
- added delete tool to canvas. Thus ...
- we no longer need the Delete key on the canvas, so we can ...
- always focus the (first) entry field, and ...
- removed "focus" parameter to edit functions
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5403 99fdad57-331a-0410-800a-d7fa5415bdb3
