This often caused accidental builds without proper dependencies.
- Makefile: include .depend also if it doesn't exist yet. This way, GNU make
will build it and all is fine.
- Makefile: use "-include" instead of "include" to avoid unnecessary nagging
- Makefile: make .depend depend on *.h and *.c, so that we catch all changes
that _might_ affect the dependencies (this is a little inefficient but better
safe than sorry)
- README: "make dep" is no longer needed
- TODO: added thoughts for more improvements
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5774 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_status.h: use macro to generate status_set_* delarations, just as we use
a macro for their definitions
- added tooltips for all non-editable fields in the status area
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5773 99fdad57-331a-0410-800a-d7fa5415bdb3
click on an anchor point of the selected object would be treated as a drag,
even if the click was very short. This created a very confusing user
experience.
- gui_canvas.c (button_release_event): if we didn't "escape" the drag radius,
don't treat the click as a drag but run the click-to-select process instead
(note: the drag visualization still flickers briefly)
- gui_canvas.c (button_release_event): to find out if we've escaped the drag
radius, just call drag_left instead of duplicating some of its code
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5772 99fdad57-331a-0410-800a-d7fa5415bdb3
be active, while in truth it had been reset internally.
- gui_canvas.c (button_press_event): if a click is used for selection (and not
dragging), reset the tool first
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5771 99fdad57-331a-0410-800a-d7fa5415bdb3
region to only cover the newly exposed area. This prevented the general
redrawing from clearing areas that still contained hovering and dragging
items. However,the paint region has no effect on reading from the drawable.
Thus when rebuilding the hover and drag stack, the still tainted image was
stored.
This issue could be solved by either introducing a separate mode where the
stack is redrawn instead of rebuilt, or by turning off double-buffering.
The former would complicate the already fickle logic of overlays, and not
having double-buffering doesn't seem to cause any ill effects.
- gui_canvas.c (make_canvas): disable double-buffering of canvas so that the
paint region is not restricted in expose events
- gui_tool.c (tool_tip): enabled canvas tooltips
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5770 99fdad57-331a-0410-800a-d7fa5415bdb3
- Makefile: use PID in temporary file name in PPM to XPM conversion, so that we
don't get mysterious failures in parallel builds
- gui_util.c (debug_save_pixbuf, debug_save_widget): helper functions to debug
pixbuf and widget content
- Makefile: added target "montage" to show the images recorded with
debug_save_pixbuf and debug_save_widget
- gui_over.c: when debugging, record the saves pixbuf in files
- gui_tool.c (tool_hover): removed unnecessary initialization
- added infrastructure for tooltips on the canvas (doesn't work properly yet)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5769 99fdad57-331a-0410-800a-d7fa5415bdb3
existed, thus creating a structure that could be saved but no longer loaded.
Likewise, one could add new variables/loops/columns if there was already one
named "_", thus creating the same problem.
- gui_frame.c (pop_up_frame): disable "Add frame" if we already have a frame
named "_"
- gui_frame.c (pop_up_frame): disable "Add variable" and "Add loop" if we
already have a variable or loop named "_"
- gui_frame.c (pop_up_single_var, pop_up_table_var): disable "Add column" if
we already have a variable or loop named "_"
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5765 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_frame.c (popup_del_frame): when deleting a frame, notify the frame tool
so that it can undo any locking
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5764 99fdad57-331a-0410-800a-d7fa5415bdb3
expression, the background of the first expression did not revert to its
original color.
- gui_style.h (COLOR_CHOICE_SELECTED): made blue a bit lighter, to improve
contrast of black foreground text
- gui_frame.c (unselect_value): build_assignment uses COLOR_EXPR_PASSIVE for
expressions in assignments, so we also have to do the same here.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5763 99fdad57-331a-0410-800a-d7fa5415bdb3
blends in and won't be mistaken for a button.
- Makefile: generate icon XPMs with transparent background
- gui_util.c (make_image): set transparency color to white
- gui_util.c (make_transparent_image): new function to return a transparent
image created from an XPM
- gui_tool.c (get_icon_by_inst): make the returned image transparent instead of
opaque
- icons/vec.fig, icons/arc.fig, icons/line.fig, icons/rect.fig, icons/circ.fig:
darkened to increase contrast on grey background
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5758 99fdad57-331a-0410-800a-d7fa5415bdb3
such a vectors pointing in the wrong direction. They were caused by overflows
due to inadequate zoom settings.
- gui.c (change_world): if the extents have grown, zoom to extents
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5756 99fdad57-331a-0410-800a-d7fa5415bdb3
pointer position relative to the user origin in the radius/angle fields.
This helps to make quick manual measurements, e.g., of clearances.
This also fixes the following bug:
- gui_canvas.c (refresh_pos): showed canvas coordinates instead of model
coordinates
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5755 99fdad57-331a-0410-800a-d7fa5415bdb3
be necessary if printing unusually large components.)
- postscript.c: in "maxfont", if we get a zero-sized font, dodge the division
by zero
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5752 99fdad57-331a-0410-800a-d7fa5415bdb3
- moved all examples to examples/
- README: updated and corrected example invocation
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5748 99fdad57-331a-0410-800a-d7fa5415bdb3
variable name" error was never cleared.
- inst.c (validate_pad_name): call status_begin_reporting before expanding the
string, to clear any previous error
- expr.c (expand): if the last character in the name is a dollar sign, print
"incomplete variable name" instead of "invalid character [...]"
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5731 99fdad57-331a-0410-800a-d7fa5415bdb3
- dump.c (print_obj): removed free(s2) left over from before the reduction of
allocations
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5728 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_tool.c (end_new_rpad): didn't initialize obj->u.pad.type, which could
cause pad_type_to_layers to abort
- postscript.c: added experimental code for full-page printing (doesn't work
properly yet)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5727 99fdad57-331a-0410-800a-d7fa5415bdb3
deleted. The new algorithm checks for collisions and also reduces the number
of allocations.
- dump.c (generate_name): store the name in the vector being named
- dump.c (generate_name): compare the new name against all names in use
- dump.c (base_name, obj_base_name, print_label): don't allocate the name
- dump.c: changed all users of the above functions accordingly
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5715 99fdad57-331a-0410-800a-d7fa5415bdb3
but there's another problem in the dumping code that still spoils the fun.
- inst.c (do_move_to_vec): marking algorithm propagated an uninitialized value
- inst.c (do_move_to_vec): we have to clear the marks of vectors that are
before the vector being moved, because they will still be visited and
propagated
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5714 99fdad57-331a-0410-800a-d7fa5415bdb3
segfault, failure to update the screen content, and assigning of invalid
references.
- gui_tools.c: removed duplicate (harmless) line
- inst.c: when moving a vector to a new base, we may have to reorder the list
so that the assertion vectors always follow their bases is still maintained.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5713 99fdad57-331a-0410-800a-d7fa5415bdb3
the solder mask with lines.
- gui_inst.c: draw solder mask with lines, not with filled rectangles and arcs
- gui_style.c: increase line width for solder mask from 1 to 2 pixels
- Makefile: added manual/concept-inst.png (forgot to commit this before)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5696 99fdad57-331a-0410-800a-d7fa5415bdb3
- changed pad classification in instances from bare/other to copper/special
- moved LAYER_* definitions from layer.h to layer.c
- after instantiation, we perform sanity checks on pads and remove layers from
coppery pads that are handled by a special layer
- fped.y: the line number in objects was never set
- overlap.c: fixed overlap calculations
- gui_tool.c: end_new_pad didn't initialize the pad type
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5635 99fdad57-331a-0410-800a-d7fa5415bdb3
make adjustments when removing layers provided by specialized pads
- gui_inst.c: moved gc construction from gui_draw_pad and gui_draw_rpad to
shared pad_gc
- layer.h: new home of all definitions related to pads and layers
- layer.c:
- overlap.c: functions to test for overlaps of pad shapes (in progress)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5634 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_status.c: the x entry are is now a vbox with variable content
- the pad type is now shown in the x entry area and can be changed by clicking
on it
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5633 99fdad57-331a-0410-800a-d7fa5415bdb3
solder mask pattern
- postscript.c: don't scale fonts down to nothing to make measurement text fit
(in progress)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5626 99fdad57-331a-0410-800a-d7fa5415bdb3
- postscript.c: moved tedious "... maxfont maxfont ..." into new function
"boxfont"
- postscript.c: "hcenter" was way off for diagonal text
- postscript.c: "realsize" didn't take into account the effect of rotation and
returned only the x component in the original coordinate system
- fped.c: feed a dummy argv to gui_init, so that we can parse the arguments
before deciding whether to bring up the GUI
- fped.c: don't bring up Gtk+ if we're not going to use it
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5578 99fdad57-331a-0410-800a-d7fa5415bdb3
wrong when printing.
- postscript.c: "realsize" incorrectly assumed that device space used units of
1/72 inch
- postscript.c: decreased measurement text size from 10 pt to 8.5 pt
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5560 99fdad57-331a-0410-800a-d7fa5415bdb3
- vectors now have their own struct in inst.u and don't share inst.u.rect.end
- when selecting points for measurements, use the highlighting we've already
done and don't redo all the O(n^3) searching for each mouse pointer movement
- removed debug code that printed what new measurements are like. We can now
use the code view for that.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5552 99fdad57-331a-0410-800a-d7fa5415bdb3
- convert icons in the manual from XPM to PNG so that Firefox can display them
too
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5534 99fdad57-331a-0410-800a-d7fa5415bdb3
last count
- loop iterations now show the actual value, not the zero-based iteration
number
- gui.html: added a GUI manual (in progress)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5531 99fdad57-331a-0410-800a-d7fa5415bdb3
