Werner Almesberger
274c6c543f
modules/stqfn20.fpd: forgot to commit
2016-09-14 13:16:50 -03:00
Werner Almesberger
e5970e73cb
modules/msl0104.fpd: Rohm MSL0104 RGB LED
2016-09-14 13:16:07 -03:00
Werner Almesberger
f74400f7bc
modules/stqfn20.fpd (STQFN-20: for Silego SLG46531
2016-09-13 04:16:12 -03:00
Werner Almesberger
df3855d9a6
modules/lga.fpd: move pin 1 marker to right side if clockwise
2016-09-13 03:23:15 -03:00
Werner Almesberger
ed8ceaf69a
modules/lga.fpd: add LGA-20-3x4.5-BMX055
2016-09-13 02:34:29 -03:00
Werner Almesberger
97e92c854c
modules/components/lga.fpd: add clockwise pin assignment, for BME280 et al.
2016-09-13 02:10:54 -03:00
Werner Almesberger
949eb44ec4
modules/lga.fpd (LGA-8-2.5x2.5-BME250): first draft (still needs cw)
2016-09-13 01:59:56 -03:00
Werner Almesberger
aa9ae563c8
modules/HIERARCHY: add *-RELAXED antennas also to hierarchy
2016-09-01 02:17:55 -03:00
Werner Almesberger
59262dbbfa
modules/meander-2450MHz.fpd (-RELAXED): grow bottom end of the antenna by 0.1 mm
...
... for a more relaxed fit of the ground via.
Background: if using a 0.3 mm drill for a finished hole size of 0.2 mm,
the drill to pad edge clearance is only 0.1 mm on the top and bottom of
the pad. To relax the constraints on the manufacturing process, we grow
the pad a little, to add an extra 2 * 0.05 mm of clearance.
2016-09-01 00:52:31 -03:00
Werner Almesberger
143fa7fe10
modules/sod.fpd (SOD-523): grow diode symbol a little (from 0.5 to 0.6 x width)
2016-04-06 10:41:01 -03:00
Werner Almesberger
cd5735643f
modules/sod.fpd (SOD-523): add 1.2 x 0.8 diode package
...
Pads are compromise between
- ON Semiconductor BAS16XV2 (very tight),
- Panasonic DA2S10400L (pads a bit wide), and
- Fairchild 1N4148WT (quite long)
2016-04-06 10:27:27 -03:00
Werner Almesberger
74671ccba2
modules/vson-powerpad.fpd: thermally enhanced 10-DFN, for TI TPS6102x
2016-03-30 04:48:03 -03:00
Werner Almesberger
34a20f9778
modules/memcard8-hirose-dm3cs.fpd: Hirose DM3CS memory card holder
2016-03-07 20:52:08 -03:00
Werner Almesberger
55907028d3
modules/DESCR (8:10-SOCKET-RA-PUSH-PULL): this is Amphenol 114-00841-68
2016-03-07 19:15:42 -03:00
Werner Almesberger
23838b3370
modules/memcard8-jae-st1w008s4b.fpd: JAE ST1W008S4B memory card holder
2016-03-07 19:15:42 -03:00
Werner Almesberger
c9e1946fca
modules/inductor-2p.fpd (INDUCTOR-2P-6mmx6mm): add 6 x 6 mm inductor
...
Taiyo Yuden NR6028T4R7M or similar.
2016-02-29 22:02:12 -03:00
Werner Almesberger
f347b29640
modules/qfn.fpd, HIERARCHY: add QFN48-nRF51 (0.4 mm pitch !)
2016-02-07 11:00:47 -03:00
Werner Almesberger
d276d71b6b
modules/0805-6.fpd: add 0603-6, remove unused parameters "a" and "c"
2016-02-05 04:57:14 -03:00
Werner Almesberger
b8cf942f7d
modules/dfn.fpd: add DFN-8-0.4mm
2016-01-17 13:02:09 -03:00
Werner Almesberger
74bd241990
modules/DESCR: add description for TL3315 and EVQPQ
2015-09-11 11:25:40 -03:00
Werner Almesberger
5e493d85f2
modules/tact-4-rect-smt.fpd: rectangular SMT tactile switch
...
- TL3315: E-Switch TL3315 series
- EVQPQ: Panasonic EVQPQ series and equivalent C&K PTS 530 series
2015-09-11 11:17:10 -03:00
Werner Almesberger
ab61cf9bec
modules/rev-led.fpd: reverse-mounted LEDs (just 1206 for now)
...
Examples: LTST-C230, APTR3216EC
2015-05-28 04:12:57 -03:00
Werner Almesberger
4247b779e4
modules/df40.fpd: Hirose DF40 series (unshielded, C and HC variants)
2015-05-28 02:33:17 -03:00
Werner Almesberger
a23a6ea1f8
modules/0805-6.fpd: copy over from ben-wpan
2015-05-23 12:39:19 -03:00
Werner Almesberger
e589e56eeb
modules/pogo.fpd, HIERARCHY: add -SILK variants (with silk screen circle)
2015-02-19 05:13:34 -03:00
Werner Almesberger
34bf59dd80
sod.fpd (SOD-123): add SOD-123 (~4.5 x 1.7 mm diode) footprint
...
Guesswork based on the following body and footprint measures:
Dimension Comchip (CGRKM400x) Rohm (RR264M-400) MCC (SM400xPL)
--------- ------------------- ----------------- --------------
B 1.4 - 1.8 1.6 +/- 0.1 1.40 - 1.90
H 2.4 - 2.8 2.6 +/- 0.1 2.55 - 3.10
Cx 3.30 3.05 129 mil = 3.3 mm
Px 1.40 0.85 39 mil = 0.9 mm
Py 1.90 1.2 48 mil = 1.2 mm
C
Gap 1.90 2.20 93 mil = 2.4 mm
End-to-end pad 4.70 3.90 165 mil = 4.2 mm
End-to-end pin 3.30-3.70 3.5 +/- 0.12 3.55 - 3.85
2015-01-05 22:42:46 -03:00
Werner Almesberger
87650f75ba
modules/memcard8-molex-1050270001.fpd: minimalistic memory card holder
2014-12-30 13:12:05 -03:00
Werner Almesberger
365de11aac
modules/1059.fpd: renamed 1059, 1060 to KS-* to avoid confusion with stdpass
2014-06-01 02:26:29 -03:00
Werner Almesberger
e83674a65a
modules/HIERARCHY: added more sub-caregories for Connector/{SMT, TH}
...
For USB, uSD, and batteries
2014-06-01 02:19:23 -03:00
Werner Almesberger
b7d32fa1aa
modules/1059.fpd (1059, 1060): Keystone CR2032 battery holders (TH and SMT)
2014-06-01 02:10:34 -03:00
Werner Almesberger
bd3663707e
modules/stdpass.fpd (xtal2-3.2mmx1.5mm): add crystal footprint
...
Not really a standard footprint, but since it fits the general pattern
so well ...
2014-05-20 14:49:00 -03:00
Werner Almesberger
083e2b0943
modules/sod.fpd: added SOD-323
...
Based on:
http://www.nxp.com/documents/reflow_soldering/sod323_fr.pdf
file:///home/root/Downloads/SOD-323PD.pdf
http://www.diodes.com/datasheets/ZLLS400.pdf
http://www.infineon.com/cms/packages/SMD_-_Surface_Mounted_Devices/SOD/SOD323_xSC76x.html
2014-05-13 10:45:01 -03:00
Werner Almesberger
a89a1d5caf
modules/spacer.fpd: add 7.5 mm clearance (bare screw/nut)
2014-01-31 14:41:06 -03:00
Werner Almesberger
63e8c0d205
modules/HIERARCHY: move FIDUCIAL from "Mechanical" to "Structure"
2014-01-31 14:17:37 -03:00
Werner Almesberger
feb85080b2
modules/HIERARCHY: give switches their own top-level category
2014-01-31 14:17:37 -03:00
Werner Almesberger
384ad5ec08
modules/pogo.fpd: add Mill-Max 09xx series TH pogo pins
2014-01-31 14:17:37 -03:00
Werner Almesberger
d83737d636
modules/usb_a_rcpt_mid.fpd: enlarge 48458 bay by tolerance
2014-01-18 16:09:33 -03:00
Werner Almesberger
76039af549
modules/pads.fpd: add -NOSILK variants; add silk measurements for rectangular pads
2014-01-17 20:20:56 -03:00
Werner Almesberger
5bfda4d341
modules/meander-2450MHz.fpd: 1.6 mm variant from CC-Antenna-DK, board #15
...
Discussion:
http://e2e.ti.com/support/low_power_rf/f/155/p/146031/528211.aspx
Design Note DN031:
http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=swra328&fileType=pdf
Layout:
http://www.ti.com/lit/zip/swrr070
The antenna layout is in the file "CC-Antenna-DK - EtchLayer1Top.gdo"
2014-01-16 12:53:16 -03:00
Werner Almesberger
b0352b4259
modules/usb_a_rcpt_mid.fpd: remove solder paste from through-holes
2014-01-15 21:59:07 -03:00
Werner Almesberger
83fc1ab657
modules/qfn.fpd (QFN32-CC2543): experimental footprint with large center hole (for DIY)
2014-01-15 21:54:05 -03:00
Werner Almesberger
6b825eb872
modules/qfn.fpd (QFN32-Freescale): make pads round to increase clearance
2014-01-14 03:30:09 -03:00
Werner Almesberger
fc2d104008
modules/sw-spdt-smt.fpd: add SW-CUS12B (for Copal CUS-12B and C&K PCM12SMTR)
2014-01-07 21:07:59 -03:00
Werner Almesberger
065199a87e
modules/qfn.fpd (QFN32-Freescale): add footprint for KL25 in 32QFN package
2014-01-05 16:53:49 -03:00
Werner Almesberger
62c90e2bf3
modules/lp2032sm.fpd: MPD Surface Mount Battery Holders for CR2032 (draft)
...
The data sheets don't seem very reliable. Check against real parts.
2014-01-05 16:12:05 -03:00
Werner Almesberger
1b997b80eb
modules/usb_a_rcpt_mid.fpd: correct 48258 drill hole; make pin pads oval
...
By making the pin pads slightly oval (1.85:2) the clearance between pins
2 and 3 is now about 0.296 mm / 11.6 mil.
2014-01-05 15:30:48 -03:00
Werner Almesberger
b19e249644
modules/usb_a_rcpt_mid.fpd: Molex 48258-0002/0001, TE 1746311
2014-01-05 12:09:57 -03:00
Werner Almesberger
bcb5563136
modules/usb_a_rcpt_smt.fpd: USB A receptacle
...
CnC Tech 1002-002-01100, Assmann AU-Y1006-2-R, etc.
2013-10-25 20:45:38 -03:00
Werner Almesberger
e15d2b546b
modules/sw-spdt-smt.fpd: draw complete outline of case
2013-09-30 04:51:48 -03:00
Werner Almesberger
2f412033e4
modules/zx62-b-5pa.fpd: add ZX62R-B-5P (Micro-USB B reversed) footprint
2013-09-25 13:17:57 -03:00
