qi-hardware
/
openwrt-xburst
mirror of git://projects.qi-hardware.com/openwrt-xburst.git
1
0
Fork 0
Code
25,488 Commits 13 Branches 0 Tags 117 MiB
Commit Graph

25488 Commits

Author SHA1 Message Date
Xiangfu 5938c827ed uboot-xburst: update to 2012.10-rc2 2012-12-28 10:30:02 +08:00
Xiangfu 9df13b15a7 xburst: ben nanonote: select ben logo, unset CONFIG_IEEE802154_6LOWPAN, SENSORS_JZ4740 2012-12-28 10:30:01 +08:00
Xiangfu 702c3aa9e6 xburst: ben nanonote: add ben boot logo 2012-12-28 10:30:01 +08:00
Xiangfu 44fed9277b xburst: ben nanonote: add modify keys and fbcon-color patches 2012-12-28 10:30:01 +08:00
Xiangfu db874d1cb5 xburst: ben nanonote: disable wpan kernel options, should be build as module 2012-12-28 10:30:01 +08:00
Xiangfu Liu 955fd00bb5 xburst: ben-wpan: add kernel module file. thanks to blogic #qi-hardware @freenode.net 2012-12-28 10:30:01 +08:00
Xiangfu 05b58eba39 xburst: ben-wpan: fix atusb cannot build as module 2012-12-28 10:30:00 +08:00
Xiangfu 098317b74e xburst: add ben-wpan support 2012-12-28 10:24:14 +08:00
Xiangfu 4a16fa46b4 xburst: ben nanonote:: add ks7010 wrieless card support 2012-12-28 10:24:14 +08:00
nbd 5e4cd88141 kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34901 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-27 22:59:51 +00:00
hauke 73af5c02d5 brcm47xx: bcma: correct M25P32 serial flash ID 
Thank you Rafał Miłecki.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34900 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-27 19:18:40 +00:00
nbd 0296ef38cb uci: update to latest version (adds list delete support), enable parallel build 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34899 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-27 17:37:10 +00:00
cyrus 517ebc0869 ipv6-support: Remove site-border feature 
* was causing routing problems
* will be reimplemented using firewall

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34898 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-27 15:47:53 +00:00
cyrus 195094b016 Remove site-border routing filter due to problems 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34897 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-27 15:47:47 +00:00
cyrus 9b62f5ffba ipv6-support: 
* Automatically detect and propagate MTU from upstream interfaces
* Add site-border feature (RFC 6204, ULA-4)
* Fix a typo

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34896 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-27 14:10:17 +00:00
cyrus 49fe1fed52 6distributed: feature update 
* Add feature to decrease IPv6-specific MTU on-demand
* Add commands to enable / disable a site-border

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34895 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-27 14:10:12 +00:00
cyrus 37d0fcb199 6relayd: Advertise IPv6-specific MTU instead of generic 
* Fixes announced MTU when using tunnels

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34894 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-27 14:10:07 +00:00
cyrus 593cc2f133 base-files: Fix a typo in config_list_foreach 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34893 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-27 14:10:01 +00:00
juhosg 7d9a07b855 mpc83xx: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34892 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 10:40:54 +00:00
juhosg 1c7dd15a1f mpc83xx: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34891 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 10:40:51 +00:00
juhosg 44b21b72fa mpc83xx: switch to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34890 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 10:40:50 +00:00
juhosg 575b583b39 mpc83xx: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34889 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 10:40:48 +00:00
juhosg c1f1e7ccd4 mpc83xx: create package for the rbppc_cf module 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34888 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 10:40:47 +00:00
juhosg 0714f3921b generic: more missing symbols for 3.{6,7} 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34887 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 10:40:41 +00:00
juhosg 2aa10d55c9 ar71xx: build image for the AP136-020 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34886 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 09:50:37 +00:00
juhosg bb447a9202 ar71xx: add user-space support for AP136-020 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34885 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 09:50:36 +00:00
juhosg 215bda85a8 ar71xx: add kernel support for the AP136-020 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34884 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 09:50:34 +00:00
juhosg 4dc5f1942d ar71xx: rename AP136 to AP136-010 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34883 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 09:50:31 +00:00
juhosg e495dc2e71 ar71xx: dynamically set AR8327's PAD configuration on AP136 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34882 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-25 18:45:32 +00:00
juhosg a735287d68 generic: ar8216: add sgmii_delay_en field to ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34881 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-25 18:45:31 +00:00
juhosg ffbe131263 ar71xx: ag71xx: show PHY interface mode in dmesg 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34880 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-25 18:45:29 +00:00
juhosg d3ca1d22b3 ramips: fix ASUS WL-330N3G MAC address 
The ASUS WL-330N and WL-330N3G has the MAC address stored at
offset 4, not 40. This is verified by reading original ASUS
firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and
GPL_WL-330N_source.1021/user/rc/common_ex.c.

Tested on WL-330N3G, it now gets the same MAC as is printed on
the label on the router.

Signed-off-by: Jan Kardell <jan.kardell@arkub.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34877 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-24 06:52:41 +00:00
juhosg e6076b9d37 ramips: fix wifi EEPROM extraction on DIR-615-Dx models 
Patch from #12636.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34876 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-24 06:52:38 +00:00
jow afc4535cfc base-files: ipcalc.sh: fix broken calculations on 64bit systems 
Calculate complements by using awk's xor() function with a mask of 0xffffffff
instead of relying on the compl() function which appears to produce broken
results on certain 64bit architectures.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34875 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-23 22:18:43 +00:00
kaloz bb460376f5 [cns3xxx]: add nol2x0 cmdline to disable l2x0 cache 
L2 cache via L2X0 cache controller available on some ARM boards can
provide a performance boost in some situations but decrease performance
in others.  This adds a kernel cmdline to disable L2X0 for cns3xxx based
boards.
 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34874 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-23 18:53:38 +00:00
cyrus 40ccb5f49b ipv6-support: Fix default RA settings for dnsmasq 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34873 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-23 18:22:48 +00:00
nbd 3a230cdbcc busybox: (vconfig) do not attempt to open /proc/net/vlan/config for no good reason (fixes #12663) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34872 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-23 10:59:57 +00:00
nbd 5123013170 build: reduce the size of package metadata a bit to keep package list files smaller 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34871 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 19:56:21 +00:00
nbd 66191d3476 tools/ipkg-utils: remove some unnecessary field checks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34870 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 19:56:17 +00:00
nbd 88281f165d opkg: keep package list files compressed when src/gz is used, reduces tmpfs usage 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34869 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 19:31:37 +00:00
nbd b989033b73 build: remove the default useless MAINTAINER value 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34868 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 18:56:16 +00:00
nbd f67b960945 dropbear: convert init script to procd 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34867 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 18:56:13 +00:00
nbd c0a7004695 base-files: add basic procd integration, let procd start (and restart) ubus instead of having an ubus init script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34866 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 18:56:09 +00:00
nbd 61b2c378ae procd: add initial implementation 
procd is the new OpenWrt process management daemon. It keeps track of processes
started from init scripts (via ubus calls), and can suppress redundant service
start/restart requests when the config/environment has not changed.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34865 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 18:56:06 +00:00
nbd cf8647e803 libnl-tiny: add includedir to pkg-config cflags 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34864 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 18:56:01 +00:00
nbd 75683f1fa3 dropbear: use network_get_device instead of scan_interfaces to get the device name 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34863 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 18:55:57 +00:00
juhosg 7eb00109f8 generic: ar8216: don't use 0 as default VID on AR8327 
VID0 is reserved for priority-tagged packets.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34862 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 18:30:04 +00:00
juhosg b84d44e379 generic: more missing symbols for 3.{6,7} 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34861 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 17:22:41 +00:00
juhosg 9798fec0b3 ramips: unify eeprom file name for the built-in wireless MAC 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34860 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 16:09:03 +00:00
juhosg 4d004cb552 ramips: rt3883: fix build error 
The cpuport_cfg field has been renamed to port0_cfg.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34859 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 13:50:47 +00:00