qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-27 08:22:25 +02:00
Code
23,996 Commits 13 Branches 0 Tags 117 MiB
14e3269c19
Commit Graph

828 Commits

Author SHA1 Message Date
juhosg
fd349e4b0c ar71xx: make 2.4GHz wlan LED work on the WR2543N 
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32615 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 16:25:26 +00:00
juhosg
0d85e0278f ar71xx: add support for the OpenMesh OM2P-LC board 
Patch-by: Marek Linder <marek@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32611 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:53 +00:00
juhosg
74d33b7b96 ar71xx: add initial support for the QCA955X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32606 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:47 +00:00
juhosg
641595b79a ar71xx: improve MDIO busy wait code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32586 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 15:24:02 +00:00
juhosg
db1a0d339e ar71xx: remove the built-in MTD map of the ALL0258N 
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32585 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 15:24:01 +00:00
juhosg
ae6a363859 ar71xx: add support for the TL-WDR4300 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32459 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 11:51:17 +00:00
juhosg
d02eb8cdaa ar71xx: remove superfluous include of asm/mach-ath79/pci.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32455 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:13:43 +00:00
juhosg
9e32544f7a ar71xx: add a common function to configure USB power GPIOs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:13:41 +00:00
nbd
669a7a0710 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 00:22:04 +00:00
nbd
2d3cf7a902 ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32336 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-13 12:54:22 +00:00
nbd
eed1fe974e ar71xx: fix PHY setup on TL-MR3020 (fixes #11572) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32093 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 17:24:12 +00:00
nbd
62977660d8 ar71xx: add a helper function for setting up PHY4 swapping on ar933x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32092 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 17:24:09 +00:00
nbd
8c1c75ba17 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 20:39:50 +00:00
nbd
0f299fab07 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31934 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 02:55:59 +00:00
nbd
dfea949949 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31925 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 21:02:41 +00:00
juhosg
e9ac406967 ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD 
Patch by Kamil Trzciński <ayufan@osk-net.pl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31846 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:25 +00:00
nbd
82ff0a8569 ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31736 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 10:36:39 +00:00
nbd
d4d537811b kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31637 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 21:19:14 +00:00
juhosg
7b820da93e ar71xx: add support for the TP-Link TL-WR1041N v2 board 
Patch-by: Vince Huang <axishero@foxmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31608 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:02:35 +00:00
juhosg
f07500066e ar71xx: allow to disable link polling on unused PHYs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:24 +00:00
juhosg
1d61105c25 ar71xx: enable MIB counters in the built-in switch of the AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31476 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 13:02:11 +00:00
juhosg
a17e6cf40e ar71xx: use ap91_pci_init for RB751{,G} 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31356 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:48 +00:00
juhosg
9b7ceff90a ar71xx: move USB device registration directly into rb751{,g}_setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31355 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:43 +00:00
juhosg
e25325e131 ar71xx: add ap9x_pci_get_wmac_data helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31354 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:42 +00:00
juhosg
9ec35a5650 ar71xx: add sanity checks to decode_rle 
Also use -EINVAL instead of -1.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31353 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:40 +00:00
juhosg
87485f3a88 ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD 
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31208 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-06 06:45:07 +00:00
juhosg
7bc411c5d9 ar71xx: boost SPI flash read performance 
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31118 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:17 +00:00
juhosg
32fd04f49a ar71xx: remove the built-in MTD map of the AP96 board 
Pass the mtd_layout via the kernel command line instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31112 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:07 +00:00
juhosg
514a769538 ar71xx: remove the built-in MTD map of the PB92 board 
Pass the mtd_layout via the kernel command line instead

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31111 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:05 +00:00
juhosg
5ca96e340c ar71xx: remove the built-in MTD map of the Zcomax devices 
Pass the mtd_layout via the kernel command line instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:04 +00:00
juhosg
e27017a728 ar71xx: remove the built-in MTD maps of several boards 
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:

 * AP113
 * ALFA N2/N5
 * DIR-600
 * DIR-615
 * DIR-825
 * TEW-6{3,5}2BRP
 * TEW-673GRU
 * WHR-G301N
 * WHR-HP-GN
 * WHR-HP-G300N

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31108 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:01 +00:00
juhosg
70b0829237 ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:37:51 +00:00
juhosg
fd48e871d0 ar71xx: add initial support for RB750GL 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31025 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 15:57:04 +00:00
juhosg
c8aab4b6c2 ar71xx: make rb750_latch_change 'static void' 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31024 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 15:57:03 +00:00
juhosg
58ce76e6b5 ar71xx: add latch_change field to rb750_led_platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31023 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 15:57:01 +00:00
juhosg
e929396e19 ar71xx: add platform data for the RB750 NAND driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31022 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 15:56:59 +00:00
juhosg
1a9e33b337 ar71xx: add AR934x specific interface speed setup for ge0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31017 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 11:11:20 +00:00
juhosg
be8e44bc68 ar71xx: add support for the jjPlus JA76PF2 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30957 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-16 18:00:34 +00:00
juhosg
aaa7c394a3 ar71xx: change LED name prefix on the jjplus boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-16 18:00:26 +00:00
juhosg
263a705cc6 ar71xx: move micrel PHY driver to the generic linux target 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30946 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-15 09:25:53 +00:00
juhosg
1d9a77e99f ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30926 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-13 17:29:38 +00:00
juhosg
0fced5df74 ar71xx: ag71xx: start aneg on switch PHYs after reset 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30925 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-13 17:29:37 +00:00
juhosg
9d0c4ce009 ar71xx: ag71xx: poll PHY status of all available switch ports 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30924 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-13 17:29:36 +00:00
juhosg
d2b8246b44 ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30923 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-13 17:29:34 +00:00
juhosg
f9450e76b1 ar71xx: reset the switch on AR934x before ethernet device registration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-13 17:29:33 +00:00
juhosg
510f76eab5 ar71xx: use a dummy callback for interfaces with fixed speed 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30913 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-12 20:38:58 +00:00
juhosg
710f4ecdd1 ar71xx: merge ar934x_bo_ddr_flush patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30912 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-12 20:38:57 +00:00
juhosg
f69d75cd5e ar71xx: fix WPS button polarity on TL-WR2543N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-07 19:50:53 +00:00
juhosg
d32129c110 ar71xx: ag71xx: fix get_port_link callback 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30841 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-07 16:32:35 +00:00
juhosg
4a420c6fa2 ar71xx: ag71xx: use the generic get_port_link implementation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30840 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-07 16:32:34 +00:00