qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 22:23:08 +02:00
Code
22,219 Commits 13 Branches 0 Tags 117 MiB
4bc970ba4f
Commit Graph

170 Commits

Author SHA1 Message Date
juhosg
77da44561c ar71xx: add initial support for the TL-WR741ND v4 board 
The ethernet port LEDs are not working yet.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:52 +00:00
juhosg
0f535ad261 ar71xx: combine LEDs setup in one file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:49 +00:00
juhosg
0fe49305de ar71xx: unify LED names on Planex boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28703 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:47 +00:00
juhosg
54e69d54d6 ar71xx: unify LED names on Buffalo boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28702 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:46 +00:00
juhosg
46393cef66 ar71xx: unify LED names on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28701 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:44 +00:00
juhosg
52378540af ar71xx/all0258n: add default config 
This adds default network and uboot-env settings for the ALL0258N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28699 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 09:23:31 +00:00
juhosg
be7781d3ef ar71xx: remove default network config of the mzk-w04nu board as well 
It works with the generic config.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28695 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 09:23:25 +00:00
juhosg
1e4e4a0fab ar71xx: remove LED setup of nonexistent interfaces on RB750 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28693 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-31 14:26:56 +00:00
juhosg
c586df7775 ar71xx: remove default network config of the wnr2000 board 
It is the same as the generic configuration.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28692 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-31 14:26:51 +00:00
juhosg
85713e36cb ar71xx: add initial support for the OpenMesh OM2P board 
Based on a patch by Marek Lindner <marek@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28617 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:51 +00:00
juhosg
c01dd82e04 ar71xx: Buffalo WHR-HP-G300N kernel support 
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:26 +00:00
jow
fbebd1e720 [ar71xx] base-files: make sure inittab-console-fixup returns with success (#10275) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:35:43 +00:00
jogo
0f7b0ae7de linux: ar71xx: add support for Mikrotik Routerboard RB493G 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28423 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-11 23:05:16 +00:00
juhosg
a46904b68e ar71xx: enable login only on the system console by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28294 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-23 19:56:38 +00:00
juhosg
5fdfc7948a ar71xx: add support for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28277 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:53 +00:00
jogo
e5839cb102 ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH 
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27814 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 11:57:51 +00:00
jow
422a78af7a [ar71xx] revert r27043 (#9513) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27343 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 19:52:57 +00:00
jow
c3c5977bfa [ar71xx] revert r27341, it introduce wrong behaviour for other models 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27342 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 19:15:45 +00:00
jow
0678f5f577 [ar71xx] turn status LED off if device finished initializing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27341 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 18:39:53 +00:00
nbd
e00ba06f78 ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27283 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 13:54:42 +00:00
acinonyx
3f2561bdea [ar71xx] Remove trailing spaces, convert spaces to tabs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27153 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-09 19:30:50 +00:00
nbd
a6c1bd4558 ar71xx: override inittab to enable login on ttyATH0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27128 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-07 17:07:10 +00:00
juhosg
5d12cb1277 ar71xx: add default network config for the AP121 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27068 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:44 +00:00
juhosg
ee7a116328 ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27043 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:13 +00:00
juhosg
20d6650643 ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27042 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:12 +00:00
juhosg
b3a8c8a5ce ar71xx: add uci config for the WLAN LED on the WRT160NL 
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26861 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:49 +00:00
juhosg
a1c5a3da98 ar71xx: use phy0tpt trigger for the WLAN LEDs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26860 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:48 +00:00
nbd
118a9c5154 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26779 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-28 21:27:42 +00:00
juhosg
b47906964d ar71xx: Add support for WZR-HP-G301NH 
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26601 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-12 09:29:10 +00:00
nbd
4ec32399c2 ar71xx: add default configuration for the switch on AP96 
Enables forwarding of frames between the switch ports (eth0).
Patch by Jouni Malinen

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26180 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-15 19:51:42 +00:00
juhosg
ae81dbbb22 ar71xx: add support for the TP-Link TL-WA901ND v2 board 
Patch-by: Jonathan Benett <jbscience87@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26119 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-13 15:08:31 +00:00
juhosg
9e07cb05fa ar71xx: add support for the WNDR3700v2 board 
Based on a patch by Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25118 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:35:42 +00:00
juhosg
2e7490c8ca ar71xx: make uci-default scripts executable 
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24897 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-04 13:44:01 +00:00
claudio
898076f479 [ar71xx] unifi: add sysupgrade and leds support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24737 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-20 17:28:34 +00:00
juhosg
133f6e8495 ar71xx: use usbdev trigger for USB LEDs by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24648 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:10:16 +00:00
juhosg
84ea49f558 ar71xx: populate LED configuration for WZR-HP-G300NH 
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>

[nand-disk trigger has been removed - juhosg]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24642 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:09:57 +00:00
juhosg
2427a1a5f9 ar71xx: add wlan led for the TL-WR941ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24612 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 19:55:50 +00:00
juhosg
29d3358e2b ar71xx: add missing files for the JA76PF board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24444 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 19:55:28 +00:00
juhosg
9bdc5b83af ar71xx: add support for the jjPlus JA79PF 
Patch-by: Cezary Jackiewicz

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:51 +00:00
juhosg
ddbca99fbc ar71xx: add support for the TP-LINK TL-MR3220 v1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24439 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:48 +00:00
juhosg
c7e80fcfbb ar71xx: add default network configuration file for the TL-MR3420 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24437 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:40 +00:00
juhosg
680d895a87 ar71xx: add nbg460n image generation 
This adds image generation for NBG460N/550N/550NH boards.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 15:17:03 +00:00
jow
db07bdac3e [ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24215 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-02 20:19:55 +00:00
nbd
f02be8f01c ar71xx: Configure WNDR3700 switch LED colors properly (#8103) 
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23879 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 18:55:16 +00:00
nbd
1a9465cf71 Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on submitter's request 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23878 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 18:53:18 +00:00
nbd
de74662151 ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984) 
Make the WiFi LEDs blink for activity on the WNDR3700, matching the
stock firmware and user expectations. The green 2.4GHz and blue 5GHz
LEDs will illuminate with the radio on, and will blink to indicate
transmission and reception.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23877 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-04 18:48:22 +00:00
nbd
a63bf2580b ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23439 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-14 13:41:42 +00:00
nbd
c952d82a6c ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23432 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-14 00:14:59 +00:00
juhosg
97627d06c5 ar71xx: initial support for jjPlus JWAP003 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-01 07:09:29 +00:00
juhosg
3628a161a5 ar71xx: add support for the TL-MR3420 v1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:59 +00:00
nbd
4fa1e52b3a Add support for Atheros AP96 reference board 
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 08:59:53 +00:00
juhosg
006386c4b4 ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22882 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-03 18:14:37 +00:00
nbd
5cc1f4bcf3 ar71xx: add a new driver for the ar7240 switch using swconfig. 
hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway
switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested
fixes #7563

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-08-16 19:21:57 +00:00
juhosg
4ebeeb5634 ar71xx: add eap7660d board to diag.sh and sysupgrade 
This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22644 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-08-14 21:07:31 +00:00
acoul
9131e95168 linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22631 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-08-14 07:48:05 +00:00
jow
698224c6c8 [ar71xx] add uci-defaults script to migrate vlan 0 to vlan 1 after sysupgrade on devices using the RTL8366s switch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22625 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-08-13 19:29:51 +00:00
nbd
858ebac7b8 ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22353 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-22 12:37:44 +00:00
jow
51c76d8aa5 [ar71xx] fix dir-825-b1 default network config after r21905 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22005 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-01 00:03:43 +00:00
juhosg
326a9590d1 ar71xx: don't use vlan 0 for devices with rtl8366s switch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21905 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-06-26 19:15:32 +00:00
juhosg
8119ffe60a ar71xx: add support for the Senao EAP7660D board 
This patch adds support for the Senao EAP7660D board to trunk.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21837 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-06-18 16:22:05 +00:00
juhosg
0802c1eb52 ar71xx: fix RB750 LED configuration 
Patch-by: Ray Bellis


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21826 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-06-17 09:24:26 +00:00
juhosg
d4c3de0bb6 ar71xx: add default network config for the RB433UAH board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21765 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-06-12 13:20:41 +00:00
juhosg
f206537fa5 ar71xx: add default network configuration file for the RB450/RB433 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21730 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-06-08 20:19:23 +00:00
juhosg
d7e830a7a9 ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards 
Cc: backfire@openwrt.org


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20752 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-09 08:40:09 +00:00
jow
58618dfb3d [PATCH 1/2] Add support for the ar8316 switch. 
This patch enhances the ar8216 driver with ar8316 support and fixes some minor
issues with the ar8216 driver itself. It should not break anything, but isn't
tested on ar8216 devices.

[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20722 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-05 23:03:16 +00:00
juhosg
d4cb79ec5f ar71xx: add uci defaults to fix trx header on the WRT160NL boards 
* patch by Otto Solares


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20526 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-27 17:38:40 +00:00
juhosg
4abdb0bd87 ar71xx: Add basic WLAN LED control to TL-WR1043ND 
* thanks to KillaB
  * closes #6834


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20415 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-25 07:31:17 +00:00
juhosg
fc27cddc24 ar71xx: fix defconfig script to work with ImageBuilder 
* patch from #5722


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20231 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-15 13:29:16 +00:00
juhosg
fa5b4cae09 ar71xx: add default network configuration for the PB44 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20099 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-09 18:05:58 +00:00
juhosg
d8bd37df34 ar71xx: add uci-defaults for the RB750 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20097 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-09 18:05:51 +00:00
juhosg
1842195b3e ar71xx: override lan port names on the RB750 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20096 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-09 18:05:48 +00:00
juhosg
c9e0797935 ar71xx: add missing protocol definitions to default network configurations 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20091 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-09 18:05:31 +00:00
juhosg
8221ebb020 ar71xx: add preliminary support for the RouterBOARD 750 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20029 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-07 05:41:01 +00:00
juhosg
3481530afd ar71xx: fix status led detection on the RB4xx boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20005 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-05 20:29:24 +00:00
juhosg
a19833b9c2 ar71xx: add default network configuration file for the TL-WR741ND board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19930 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-01 07:34:48 +00:00
juhosg
f12c18b33b ar71xx: add default network configuration file for the DIR-600 rev. A1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19929 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-01 07:34:46 +00:00
juhosg
b71034e210 ar71xx: add default network configuration file for the TL-WR1043ND board 
Thanks to Andrew Tarabaras.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19840 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-24 13:39:20 +00:00
juhosg
851a27266f ar71xx: use the correct name for the status LED on the WRT400 board 
(thanks to chuljin, patch from #6734)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19831 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-24 13:38:37 +00:00
juhosg
3d6f1c6769 ar71xx: update default network configuration file for the WNDR3700 
Signed-off-by: Scott Dudley <spmsink@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19830 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-24 13:38:31 +00:00
juhosg
dac0304da2 ar71xx: add uci configuration for the WAN LED on the WNDR3700 
Based on a patch by Scott Dudley <spmsink@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19746 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-19 11:52:25 +00:00
nbd
a9929695c6 add preinit modularization work by Daniel Dickinson (cshore) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19331 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-25 17:11:17 +00:00
juhosg
e47c4f9d9e rtl8366_smi: move RTL8366S driver into a separate file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19279 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-22 17:38:07 +00:00
juhosg
8d8efd3412 ar71xx: change failsafe message 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19221 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-18 09:15:35 +00:00
juhosg
8ce4375c1a ar71xx: update default network configuration for the WNDR3700/DIR-825-B1 
Also drop the default network configuration of the TL-WR1043ND, because
the RTL8366RB switch is not yet supported by the rtl8366-smi driver.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19217 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-18 09:01:47 +00:00
nbd
5b9d139baa ar71xx: add some default configs for rtl8366 based devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19210 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-18 00:44:52 +00:00
nbd
f7997f15e2 adjust switch default configs for the swconfig api change 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19209 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-18 00:38:08 +00:00
juhosg
f010cfd099 ar71xx: add preliminary support for the Buffalo WZR-HP-G300NH 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19150 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-15 12:08:03 +00:00
juhosg
0ab559a23e ar71xx: add support for the D-Link DIR-600 rev. A1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19100 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-11 08:02:10 +00:00
juhosg
db5288e38a ar71xx: add support for the TL-WR841N v1.5 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18893 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-22 19:31:28 +00:00
juhosg
928a89ed7a ar71xx: separate DIR-615 rev. C1 support from the TEW-632 (based on the 
patch from #6186)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18818 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-18 12:57:01 +00:00
juhosg
5bb5adaa1a ar71xx: enable diagnostic LED on the Routerstation Pro 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18782 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-15 08:35:11 +00:00
jow
5ec38ae28d [ar71xx] fix default network config after r18699 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18708 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-08 22:22:16 +00:00
nbd
1b18fb38dc ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection (#6309) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18699 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-08 14:06:18 +00:00
juhosg
2417cf6791 ar71xx: TL-WR1043ND support cleanup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18697 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-08 12:46:30 +00:00
juhosg
c3035532ab ar71xx: DIR-825 support cleanup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18622 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-03 15:07:41 +00:00
juhosg
9e412c9b2e ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to 
ValXdater)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18621 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-03 15:07:34 +00:00
juhosg
bf337e9b27 ar71xx: add default network configuration file for the WNDR3700 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18566 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-27 21:21:24 +00:00
juhosg
4e8c80cba4 ar71xx: enable failsafe on the Nanostation M/Rocket M 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-25 09:51:28 +00:00
juhosg
1e99bb12ff ar71xx: register LEDs and buttons on the WNDR3700 
Thanks to aorlinks (https://forum.openwrt.org/viewtopic.php?pid=97415#p97415)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18435 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-16 17:31:25 +00:00
juhosg
a73408d56c ar71xx: add default network configuration for RS and RS-Pro 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18103 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-20 19:36:47 +00:00