qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-28 11:50:38 +02:00
Code
18,994 Commits 13 Branches 0 Tags 117 MiB
d26482830e
Commit Graph

6908 Commits

Author SHA1 Message Date
cshore
d26482830e bcm63xx: Finalize support for DSL-274xB, rev C2. 
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:36 +00:00
cshore
36faccabad bcm63xx: Allow 'colored' power leds. 
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24187 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:30 +00:00
cshore
74fd46691e bcm63xx: Don't hardcode the switch ethernet interface in preinit. 
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24186 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:26 +00:00
cshore
2ce35911df bcm63xx: Add defconfigs. 
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24185 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 22:04:19 +00:00
florian
f0589f7290 [ar7] refresh patches and remove trailing whitespaces 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24181 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:14:34 +00:00
florian
90dd053819 [ar7] refresh and refine 972-cpmac_multi_probe.patch, patch from sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24180 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:03:56 +00:00
florian
45f1499380 [ar7] refresh 973-cpmac_handle_mvswitch.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24179 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:03:48 +00:00
florian
71bfc1ff04 [ar7] refresh and refine vlynq patch, patch from sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24178 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 18:03:42 +00:00
hauke
cae14a6a2e brcm47xx: remove support for old kernel versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24168 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 14:08:04 +00:00
hauke
9d386c901e brcm47xx: use kernel 2.6.36.1 as new default kernel for this target. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24167 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 14:05:31 +00:00
hauke
cfe0566cfd kernel: add missing config symbols for 2.6.37-rc3 
Thank you maddes for reporting. (closes #8323)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-28 11:14:25 +00:00
hauke
eb0da340cb brcm47xx: reorder patches like they were commitet upstream 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24162 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-27 22:47:11 +00:00
nbd
0726c0de70 remove CONFIG_ADM6996_PHY=y for ar7 and atheros - this driver is incomplete and should not be used yet 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24161 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-27 22:40:26 +00:00
hauke
53f5427aef kernel: add missing config option 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24157 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-27 16:08:41 +00:00
florian
ae6fa6a361 [ar7] patch 972-cpmac_multi_probe.patch correctly, thanks sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24142 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 12:18:41 +00:00
florian
2e825b7d5b [ar7] rename 973-cpmac_handle_mvswitch.c to 973-cpmac_handle_mvswitch.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24141 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 12:18:36 +00:00
florian
1a32a83a20 [ar7] handle mvswitch in cpmac, rework MII probing logic, patch from sn9 and Wipster 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24140 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 11:58:02 +00:00
florian
87ae2b3271 [ar7] handle new revisions of vlynq wrt reset sequence, patch from sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24139 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 11:57:57 +00:00
florian
61b72678e6 [ar7] increase flash window size to 32MiB, patch from sn9. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24138 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-25 11:57:52 +00:00
kaloz
d053fa7af0 update to the latest stable kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24136 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 18:50:11 +00:00
cshore
0760ba4d65 [brcm63xx] image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24127 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 11:06:13 +00:00
juhosg
ed0adccdff ramips: add support for Belkin F5D8235 v2 board 
No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:23 +00:00
juhosg
dbdef16088 generic: add rtl8366rb switch vlan fid support 
Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:21 +00:00
juhosg
d59a23df99 ramips: Use NET_IP_ALIGN instead of hardcoding 2 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24124 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:18 +00:00
juhosg
37b545f00f ramips: DMA map the correct RX skb size 
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24123 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:16 +00:00
juhosg
c523394925 ramips: Don't trigger BUG_ON due to skb allocation failure 
Instead just drop the rx'ed frame silently and reuse the already
available buffer.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24122 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:12 +00:00
juhosg
e0af17401f ramips: Remove unnecessary skb_put 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24121 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-24 10:01:08 +00:00
cshore
97de625a9b [brcm63xx] image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24118 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 20:17:08 +00:00
acoul
e79fbe8597 linux/brcm47xx: sync yhe BCM4710 fix with the upcoming upstream patch. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24116 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 16:41:34 +00:00
acoul
ed8ad021b1 linux/generic: add 2.6.37 support for the Cisco 7941/7945 IP phones: http://lkml.org/lkml/2010/11/21/219 (thank you Kevin Cernekee) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24114 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 14:36:15 +00:00
acoul
a7565ddade linux/brcm47xx: add missing patch on r24112 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24113 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 14:12:42 +00:00
acoul
723857f8a7 linux/brcm47xx: Broadcom BCM4710 does not belong in the BMIPS4KC family. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24112 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 14:08:41 +00:00
acoul
d92c081a67 linux/generic: refresh 2.6.37 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24111 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 14:04:42 +00:00
hcg
2f0ecbd629 [gumstix] Fix ext4 build 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 12:07:50 +00:00
hcg
517144faf6 [gumstix] Bump kernel version 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24109 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 11:59:03 +00:00
hcg
f6bd632bfc [gumstix] Remove NAND support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24108 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-23 10:16:37 +00:00
acoul
e521e0fb00 linux/brcm47xx: properly fix r24096 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 18:16:55 +00:00
acoul
19c4f2cb67 linux/brcm47xx: mainline 2.6.37 602977b0d672687909b0cb0542ede134ed6ef858 commit broke CPU revision: 00024000, MIPS (cc 0x805, rev 0x00, vendor 
0x4243) functionality. Revert that patch until we get a proper fix.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24096 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 17:17:15 +00:00
acoul
c2edd8cbfc target/linux: sync kernel patches to 2.6.37-rc3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24095 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 16:29:27 +00:00
kaloz
825f13453e remove 2.6.25 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24089 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 13:43:32 +00:00
kaloz
02028358c7 [coldfire]: remove 2.6.25 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24088 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 13:31:46 +00:00
kaloz
12a0868f92 [coldfire]: 2.6.31 support (WiP) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24087 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 13:29:58 +00:00
kaloz
d7833103e7 [target/x86]: move x86 back to .32 for now 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24085 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 12:58:31 +00:00
kaloz
0835d732ce switch from ext2 to ext4 (w/o) journaling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24084 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 12:12:39 +00:00
kaloz
1823498df7 use ext4 for ext2/3 on 2.6.32+ 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24083 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 12:11:50 +00:00
kaloz
d5e6bde258 add 2.6.32 patches to use ext4 for ext2/3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24082 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 12:03:23 +00:00
kaloz
e71ac4855b [target/x86]: additional Kconfig options for newer kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24081 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 11:34:45 +00:00
kaloz
e1fc4af8c6 [target/x86]: we don't need microcode updates 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24080 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 11:33:25 +00:00
kaloz
fa101fbdb6 add missing Kconfig symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24077 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-22 11:03:29 +00:00
nbd
fcdd5734fb x86: add missing l1 cache shift change 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24072 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-21 23:27:25 +00:00