qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 18:31:53 +02:00
Code
24,181 Commits 13 Branches 0 Tags 117 MiB
d27564d094
Commit Graph

589 Commits

Author SHA1 Message Date
juhosg
b8e2e95b70 ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 21:13:54 +00:00
juhosg
86c95a9481 ar71xx: allow to use the command line hack on compex devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29659 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:58 +00:00
juhosg
bf238aa8e9 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:57 +00:00
juhosg
9229d15c65 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:50 +00:00
juhosg
2b1cf2b32c ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:47 +00:00
juhosg
fd1bdc7c45 ar71xx: add support for the ALFA Network N2/N5 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:25 +00:00
juhosg
a604775f66 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:46 +00:00
juhosg
096af0d2e8 ar71xx: fix LEDs on the WRT400N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 13:54:11 +00:00
jow
674429b24f [ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-21 01:27:48 +00:00
nbd
eaf9c95caf ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 09:04:15 +00:00
nbd
cdf64b5cdc ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-18 22:20:17 +00:00
juhosg
12930c3272 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:38 +00:00
juhosg
ba50354437 ar71xx: add defines for the AR934X GMAC interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:36 +00:00
juhosg
a55b188ebe ar71xx: fix GMAC1 interface speed on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:35 +00:00
juhosg
07d1bcb923 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:30 +00:00
juhosg
e61b2d1ed9 ar71xx: allow to attach the internal switch for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:22 +00:00
juhosg
812763d48e ar71xx: introduce ar71xx_switch_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:11 +00:00
juhosg
803afe6e40 ar71xx: fix mac addresses on jjPlus devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:18 +00:00
juhosg
d8f4833329 ar71xx: add support for ALFA Network's Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:10 +00:00
juhosg
33334db9dc ar71xx: add GPIO function bit defines for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:07 +00:00
nbd
5841748e56 ar71xx: fix gpio count for ar7241/ar7242 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:47:24 +00:00
nbd
75bbe95c04 ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:21:42 +00:00
nbd
e7bf9d2f6d ar71xx: fix wireless led on wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 15:00:43 +00:00
juhosg
17595c4da2 ar71xx: enable AR9341 support at setup.c 
Patch-by: dyq <729650915@qq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 14:59:43 +00:00
juhosg
6caa8876b2 ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 14:59:40 +00:00
nbd
ec66b62afa ar71xx: add gpios and usb for wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29509 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 13:33:44 +00:00
juhosg
1e26277d1e ar71xx: use RedBoot parser on PB44 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29501 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-11 15:52:47 +00:00
juhosg
99997320ea ar71xx: use correct mac on the lan interface on several TP-LINK devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:10:58 +00:00
juhosg
a97fd90341 ar71xx: allow to pass negative offset values for ar71xx_init_mac 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29457 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:10:55 +00:00
juhosg
097436bca8 ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29456 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 18:21:15 +00:00
nbd
c1679af6b3 ar71xx: add preliminary support for wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:20:51 +00:00
nbd
f684eb2454 ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:20:44 +00:00
juhosg
44a7438217 ar71xx: rewrite WNDR3700/3800 handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 13:03:54 +00:00
juhosg
11a837ce02 ar71xx: use the tp-link parser on the tp-link boards 
Also remove static partition maps.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29416 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:31 +00:00
juhosg
37a46ae9f4 ar71xx: run the RedBoot parser only on the RedBoot based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29414 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:25 +00:00
juhosg
23c921bb91 ar71xx: run the MyLoader parser only on the WP543 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29413 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:23 +00:00
juhosg
4dbb6eef31 ar71xx: run the wrt160nl parser only on the WRT160NL board 
Also remove static mtd partition definitions.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29412 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:20 +00:00
juhosg
41d8ed17e0 ar71xx: add support for Ubiquiti AirRouter 
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:49:02 +00:00
juhosg
e6638f1bd3 ar71xx: modify phy mask of the WP543 board 
This fixes ethernet on newer boards. Based on a patch from #9702.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29328 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:43 +00:00
juhosg
4baa5f5378 ar71xx: fix wndr3800 machine name 
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29326 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:38 +00:00
juhosg
74bada8592 ar71xx: set GE0 phy_mask for AR933x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29274 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-20 11:30:10 +00:00
juhosg
2ba51b8c17 ar71xx: fix USB LED on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29126 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:15 +00:00
juhosg
8f09b983e5 ar71xx: add a function for selecting output signal on a given GPIO pin 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:14 +00:00
juhosg
95684215c0 ar71xx: fix GPIO function handling on AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29124 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:13 +00:00
juhosg
73b96446ee ar71xx: add AR71XX_ prefix to GPIO_REG_* defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29123 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:11 +00:00
juhosg
b9c4475b88 ar71xx: fix a compiler warning 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 13:07:47 +00:00
juhosg
e8a5cbc660 ar71xx: fix GPIO count for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29109 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 13:07:45 +00:00
juhosg
2f0405019f ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29108 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:53 +00:00
juhosg
c86a746ece ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29107 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:51 +00:00
juhosg
c6f1eddcdf ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29106 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:49 +00:00
juhosg
de73b57f12 ar71xx: add an irq parameter for ar724x_pcibios_init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29105 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:47 +00:00
juhosg
1937a07a4e ar71xx: remove hardwired interface parameters from mach-* files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29103 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 07:38:09 +00:00
juhosg
2b0cd69920 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 07:38:07 +00:00
juhosg
7f6b8dc9f4 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29101 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 07:38:05 +00:00
juhosg
f0f8408f20 ar71xx: enable has_gbit flag on AR724{0,1} 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29026 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 17:36:36 +00:00
juhosg
5e68925d9a ar71xx: fixup onboard PCIe chip registration on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29022 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 12:48:03 +00:00
juhosg
cf53375340 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29021 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 12:48:01 +00:00
juhosg
7ea3800d31 ar71xx: remove mii_ctrl resources of the ethernet devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29016 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:03 +00:00
juhosg
228681e328 ar71xx: set MII interface speed from the set_speed callbacks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29013 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:59 +00:00
juhosg
7571fae3ab ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data 
Also rename the corresponding callback functions.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29012 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:57 +00:00
juhosg
95d3699b73 ar71xx: ag71xx: remove MII interface setup code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29011 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:56 +00:00
juhosg
13e0098939 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29010 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:54 +00:00
juhosg
0999f2be56 ar71xx: use the button for WPS control on the DB120 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28990 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:20 +00:00
juhosg
69a4e7ba6a ar71xx: register the second ethernet interface on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28989 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:19 +00:00
juhosg
f42393b3c6 ar71xx: implement SoC specific phy interface setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28988 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:18 +00:00
juhosg
428566d3de ar71xx: move phy interface setup into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28987 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:16 +00:00
juhosg
9c2632e5aa ar71xx: register both MDIO bus on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28986 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:59 +00:00
juhosg
8255c166fd ar71xx: add AR934X specific MDIO registration code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28985 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:56 +00:00
juhosg
79bc01d085 ar71xx: add a secondary mdio bus 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28984 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:54 +00:00
juhosg
4e5c6e94da ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28983 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:50 +00:00
juhosg
f20b056795 ar71xx: add an id argument to ar71xx_add_device_mdio 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28982 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:48 +00:00
juhosg
7d1b33ecbd ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28981 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:42 +00:00
juhosg
1553f9eabd ar71xx: add AR934x specific USB setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28980 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:20 +00:00
juhosg
5f0b41bae5 ar71xx: register the first ethernet interface on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28979 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:18 +00:00
juhosg
8a3f26299d ar71xx: allow to register ethernet interfaces for AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28978 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:17 +00:00
juhosg
a1f5559837 ar71xx: add AR934X specific bootstrap and reset register bits 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28976 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:15 +00:00
juhosg
bb977eb73b ar71xx: fix GPIO direction setup for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28974 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:09 +00:00
juhosg
1d1240855a ar71xx: fix AR934X clock frequency calculation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28973 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:08 +00:00
juhosg
266baaf0dd ar71xx: add support for the Buffalo WHR-HP-GN board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28805 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:10 +00:00
juhosg
17990be972 ar71xx: add support for the Buffalo WHR-G301N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:07 +00:00
juhosg
29f0664566 ar71xx: fix WHR-HP-G300N MTD partitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28800 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:03 +00:00
juhosg
38ba6904bb ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 14:38:12 +00:00
juhosg
77da44561c ar71xx: add initial support for the TL-WR741ND v4 board 
The ethernet port LEDs are not working yet.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:52 +00:00
juhosg
2fb031808c ar71xx: add AR933X GMAC register defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:50 +00:00
juhosg
0fe49305de ar71xx: unify LED names on Planex boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28703 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:47 +00:00
juhosg
54e69d54d6 ar71xx: unify LED names on Buffalo boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28702 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:46 +00:00
juhosg
46393cef66 ar71xx: unify LED names on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28701 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:44 +00:00
juhosg
85713e36cb ar71xx: add initial support for the OpenMesh OM2P board 
Based on a patch by Marek Lindner <marek@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28617 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:51 +00:00
juhosg
8256ef2e81 ar71xx/all0258n: fix partition layout 
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28615 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:47 +00:00
juhosg
c01dd82e04 ar71xx: Buffalo WHR-HP-G300N kernel support 
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:26 +00:00
juhosg
61504e67d9 ar71xx: add kernel support for the Allnet ALL0258N board 
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28564 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:21 +00:00
jogo
0f7b0ae7de linux: ar71xx: add support for Mikrotik Routerboard RB493G 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28423 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-11 23:05:16 +00:00
juhosg
8d0d02042c ar71xx: fix MAC addresses on the DIR-825-B1 board 
Patch-by: Lukas Kuna

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28295 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-23 19:56:39 +00:00
juhosg
5fdfc7948a ar71xx: add support for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28277 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:53 +00:00
juhosg
8f241d9a09 ar71xx: add AR933x specific USB setup function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28276 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:51 +00:00
juhosg
3a5386be36 ar71xx: add ar71xx_device_reset_rmw helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28275 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:50 +00:00
juhosg
f580569c07 ar71xx: remove 'default [yn]' from machine Kconfig entries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28273 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:47 +00:00
juhosg
5bc57a6b20 ar71xx: sort AR71XX_MACH_* entries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28272 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:45 +00:00
nbd
8708bcc2d3 ar71xx: do not count normal interrupts as spurious (fixes #10037) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28182 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-06 05:38:23 +00:00
nbd
25d7a6da6c ar71xx: fix ethernet PLL setting on ar7242 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28124 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-29 21:23:46 +00:00