qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-26 05:43:20 +02:00
Code
24,497 Commits 13 Branches 0 Tags 117 MiB
ea60258a5f
Commit Graph

9634 Commits

Author SHA1 Message Date
hauke
ea60258a5f [brcm47xx]: run make kernel_oldconfig 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33599 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-30 11:44:04 +00:00
hauke
ea8a5ad7cc [brcm47xx]: ignore the last page on bcma based SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33598 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-30 11:43:40 +00:00
hauke
43594d67bf [brcm47xx]: Fix reading sprom from nvram without a prefix 
The bcma based SoCs with a ieee80211 core on the SoC and an other
connected via PCIe or USB store the sprom for the SoC with a sb/1/
prefix. The SoC with just one wifi core do not use prefixes. The
BCM4706 do not use a prefix for the SoC part at all, because the prefix
is the path to the ieee80211 core and there is non on the BCM4706.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33597 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-30 11:43:13 +00:00
hauke
bdb7b30f11 [brcm47xx]: improve the check for the memory size 
This will hopefully fix bug #9360 and #9097 in trunk.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33596 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-30 11:42:16 +00:00
blogic
552688c8bf [kernel] dont explicitly select wireless-tools. rely on the drivers that need them to have the right dependency 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-28 21:54:31 +00:00
blogic
4991a16db1 [atheros] add support for adm6996 phy 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33592 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-28 21:38:02 +00:00
blogic
786e0389eb [lantiq] tapi was not registeredproperly for most arcadyan boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33591 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-28 20:57:06 +00:00
kaloz
295c473ae4 Add FIQ support for cns3xxx 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33581 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-28 17:35:35 +00:00
kaloz
57ce687d38 Update board support for Gateworks Laguna Product family 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33580 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-28 17:34:18 +00:00
kaloz
07511ec793 USB iso mode fixes 
Resolves an issue where isochronouse USB would cause the driver to hang as
well as scheduling issues.
 
 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33579 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-28 17:31:22 +00:00
juhosg
6d33dda889 ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33575 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 20:05:42 +00:00
juhosg
da91b54f0f generic: enable CONFIG_USB_EHCI_TT_NEWSCHED 
This feature was experimental in old kernels but
that flag has been removed in 2.6.36. Additionally,
the option is enabled by default since then.

See: http://www.spinics.net/lists/linux-usb/msg31993.html

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33574 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 20:05:39 +00:00
juhosg
c4723d07e6 ramips: add memory detection code for RT5350 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33571 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 10:18:15 +00:00
juhosg
4110f0d379 ramips: allow to use custom code for memory size detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33570 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 10:18:14 +00:00
florian
ea2de79f86 [uml] include sys/resource.h in arch/um/os-Linux/start_up.c (#12155) 
Required for recent (e)glibc systems

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33569 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 09:21:01 +00:00
kaloz
f1b159c402 [cns3xxx]: fix ncores for single-core systems. 
For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS
shows which ones are active.
 
 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33566 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 08:07:17 +00:00
kaloz
1bf2f96f67 [cns3xxx]: add i2c retries 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33565 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 08:06:13 +00:00
kaloz
b966239c03 [cns3xxx]: fix pcie abort handling 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33564 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 08:05:19 +00:00
florian
c5fa20650a [brcm63xx] remove kmod-spi-bitbang 
This is no longer a dependency of kmod-spi-bcm63xx

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-26 20:11:37 +00:00
juhosg
07d80167c0 generic: add upstream commit id to codel patches and refresh those 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33560 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-26 14:17:17 +00:00
florian
ee1a7a743e [kernel] backport the upstream entropy changes (#11951) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33559 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-26 12:54:01 +00:00
florian
62bcd38cc3 [targets] get rid of the IRQF_SAMPLE_RANDOM flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33558 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-26 12:53:58 +00:00
florian
237dcc5119 [mcs814x] add wmbus-repeater to the dLAN USB Extender profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 20:56:50 +00:00
florian
e47c1f32bb [mcs814x] enable multicast and advanced ip routers configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 20:53:34 +00:00
florian
9b1b55700d [mcs814x] add kmod-usb-serial-ftdi to the dLAN USB Extender profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 20:50:20 +00:00
blogic
01886f51dd [ramips] make uci-defaults switch detection work on rt5350 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 14:47:18 +00:00
blogic
e9a777ed10 [ramips] add ethernet support for rt5350 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 14:47:08 +00:00
blogic
90960d25b1 [ramips] make ramips ethernet use a register mapping table 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 14:46:58 +00:00
hauke
98837afb76 [brcm47xx]: activate failsafe on all ports of the switch and not just port 0. 
Sometimes the port 0 was the WAN port or there could be some device 
where the port 0 is not wired to an actual Ethernet port. Now telnet in 
failsafe will listen on all ports of the switch so user do not have to 
search for the correct port any more. This change will make the switch 
leak traffic between the WAN and the LAN port, but you should not use 
failsafe while connected to a untrusted network.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 14:04:59 +00:00
juhosg
a23e652340 ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards 
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed  from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:57:41 +00:00
juhosg
417602ac1e ar71xx: automatically find WLAN calibration data on TEW-673GRU 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:57:40 +00:00
juhosg
bb4a32bb81 ar71xx: automatically find WLAN calibration data on DIR-825-B1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:57:38 +00:00
juhosg
39348acc10 ar71xx: add missing backslash to uci-defaults/leds (closes #12240) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33537 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:49:43 +00:00
blogic
ba6ee81454 [ramips] unbreak port mapping detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33536 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 09:51:48 +00:00
juhosg
a7bf55a712 ar71xx: use different machtype and setup for the TL-MR3040 
Should fix #12211. Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-24 18:45:56 +00:00
nbd
476060c78a x86: avoid using grub prepare when using grub2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-23 09:59:56 +00:00
nbd
9fab9ffb98 x86-generic: enable a few more common kernel options/drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33516 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 23:29:20 +00:00
nbd
02074f1f37 kernel: increase log buffer size 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33515 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 23:10:42 +00:00
nbd
5e6024e9f9 x86: enable usb storage support for the generic subtarget to support booting from usb devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 21:15:59 +00:00
nbd
e2b0f224fb x86: add support for building grub2 images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 20:10:42 +00:00
nbd
e3c123c82b x86: split generic image building into a separate script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33511 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 20:10:35 +00:00
nbd
ea979190c1 x86: rename gen_image_x86.sh to gen_image_grub.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33510 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 20:10:31 +00:00
nbd
cc4fec07c7 cns3xxx: fix ethernet driver tx completion and queue stop/start 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33504 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 00:34:53 +00:00
nbd
ddbfaa46f7 cns3xxx: implement ethernet fraglist tx support for improved bridging performance with jumbo frames 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33503 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 00:34:49 +00:00
kaloz
e3342242df [cns3xxx]: move gpio stuff into the right file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33502 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-21 05:40:04 +00:00
kaloz
053d207b3c [generic/3.3]: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33501 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-21 05:38:16 +00:00
nbd
42b2ad0d3b cns3xxx: add a small optimization for rx offload 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33500 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-21 00:13:12 +00:00
nbd
9097df315e cns3xxx: fix ethernet port lookup for multi-descriptor jumbo frames 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33499 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-21 00:13:08 +00:00
nbd
1a638ea9ad cns3xxx: fix ethernet packet alignment issues (hw has an alignment requirement of 64), fix skb fragment chaining 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33498 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-20 20:27:18 +00:00
nbd
6c383cf512 kernel: enable perf events when enabling profiling, fixes oprofile on arm 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33497 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-20 20:27:14 +00:00