qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-26 05:43:20 +02:00
Code
23,720 Commits 13 Branches 0 Tags 117 MiB
ee556c7f7b
Commit Graph

9223 Commits

Author SHA1 Message Date
hauke
a08e2a1c37 kernel: add some missing config options added by r31756 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31774 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 13:28:30 +00:00
hauke
b1e2eade99 kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31772 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 13:22:38 +00:00
hauke
c343cde492 brcm47xx: remove support for kernel 3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31771 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 13:20:10 +00:00
juhosg
dcea0bf81c x86/thincan: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31765 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 06:41:01 +00:00
juhosg
db081f453b x86/xen_domu: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31764 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 06:41:00 +00:00
juhosg
4dcd044429 x86/kvm_guest: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31763 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 06:40:58 +00:00
juhosg
5fe6f552d3 x86/generic: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31762 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 06:40:56 +00:00
nbd
b3c4d367ce kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht) 
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:

http://queue.acm.org/detail.cfm?id=2209336

Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.

Additionally,

fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.

These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.

Includes updates to codel for better portability and speed

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31756 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 15:23:03 +00:00
juhosg
287ab9841e x86/alix2: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31753 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:45:02 +00:00
juhosg
2b245c96a9 x86/net5501: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31752 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:59 +00:00
juhosg
3261e9d285 x86: sync 3.3 configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31751 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:55 +00:00
juhosg
2075a32be0 x86: sync 3.2 configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31750 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:52 +00:00
juhosg
005d04baef x86: sync 2.6.39 configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31749 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:49 +00:00
juhosg
7b285c80fb linux/3.3: add missing symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31748 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:46 +00:00
juhosg
003fb14844 linux: add CONFIG_POWER_SUPPLY_DEBUG symbol 
It was missing in the previous commit.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31738 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 11:12:31 +00:00
juhosg
5cc763c7b2 linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 10:58:52 +00:00
nbd
82ff0a8569 ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31736 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 10:36:39 +00:00
blogic
6a54667829 [lantiq] code style cleanup of the mach files 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31735 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 09:38:05 +00:00
blogic
993c2e232f [lantiq] adds zyxel p2601hnfx support 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 09:38:02 +00:00
blogic
5af9c39784 [lantiq] set 3.3.6 as default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31733 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 09:37:59 +00:00
blogic
1fffba2171 [lantiq] set 3.3.5 as default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31718 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 16:11:26 +00:00
juhosg
674c61407c linux/3.0: R.I.P. 
It is used by the broken omap35xx/gumstix target only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31717 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:34 +00:00
juhosg
c7b0f82f36 realview: remove 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31716 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:32 +00:00
juhosg
fd4e26402c realview: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31715 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:31 +00:00
juhosg
6b364205d7 realview: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31714 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:29 +00:00
juhosg
96bc3c2734 linux/3.3: more missing config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31713 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:23 +00:00
hauke
af5a56a89c kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31710 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 11:28:02 +00:00
juhosg
298dcd23d1 kernel: update linux 3.3 to 3.3.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 09:18:32 +00:00
hauke
3ad338f697 amazon: fix section mismatch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31707 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 15:31:42 +00:00
hauke
c8c0045b91 amazon: update amazon target to kernel 3.3 
This is just compile tested, my device is currently not working.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 15:10:40 +00:00
juhosg
501390d552 gemini: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31700 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 12:04:04 +00:00
juhosg
1d2df477ff gemini: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31699 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 12:04:02 +00:00
juhosg
6a4f0ff0d7 gemini: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31698 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 12:03:59 +00:00
hauke
0b98ffdc6a brcm47xx: generate image for Linksys WRT610N V1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31696 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 00:16:57 +00:00
hauke
05c09e7de4 kernel: ssb: add PCI IDs 0x4322 and 43222 
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.

This fixes #10887.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31695 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 00:08:12 +00:00
hauke
8297c7ff8b brcm47xx: fix tg3 ssb patch 
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31694 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 23:59:12 +00:00
juhosg
d2821676fa linux/2.6.38: R.I.P. 
It is used only by the broken coldfire target.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31688 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 12:05:21 +00:00
juhosg
4b6fa24c63 linux/2.6.37: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31687 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 12:05:19 +00:00
juhosg
faeed4ab57 linux: add broken flag to remaining targets which are using 2.6.37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31686 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 12:05:18 +00:00
juhosg
12701e008f iop32x: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31685 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:36 +00:00
juhosg
9a9b022066 iop32x: switch to 3.3 
It is compile tested only, so add a broken flag.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31684 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:34 +00:00
juhosg
5f514056be iop32x: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31683 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:32 +00:00
juhosg
8cc898c122 sibyte: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31682 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:30 +00:00
juhosg
c53f588e2b sibyte: switch to 3.3 
It is compile tested only, so add a broken flag.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31681 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:28 +00:00
juhosg
8e84deb1d4 sibyte: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31680 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:26 +00:00
juhosg
976d0df463 ixp4xx: fix ixp4xx_crypto build error 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31679 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:23 +00:00
juhosg
88a3d8e65f orion: remove the broken broken flag 
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9

Additionally, the flag was added to a wrong place
so it had no effect.

Thanks to StrikerNL for testing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31674 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-10 20:20:43 +00:00
juhosg
f32805af2d kirkwood: fix Kconfig symbol for NSA-310 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31673 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 16:16:52 +00:00
blogic
510366a907 [lantiq] Add 3.3 config files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31672 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 12:52:24 +00:00
blogic
d0ba13b35e [lantiq] Add missing 3.3 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31671 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 12:52:21 +00:00
blogic
dcc5e22d87 [lantiq] Drop 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31670 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 12:52:19 +00:00
juhosg
ee96308b09 kirkwood: add support for the ZyXEL NSA-310 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31669 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:43 +00:00
juhosg
838f9f9085 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support 
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31668 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:41 +00:00
juhosg
843274aa37 kirkwood: enable GPIO sysfs interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31667 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:40 +00:00
juhosg
7af2aa70a5 kirkwood: nuke 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31666 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:39 +00:00
juhosg
aafa8c1910 kirkwood: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31665 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:37 +00:00
juhosg
4942fd2b79 kirkwood: add 3.3 support 
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31664 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:36 +00:00
juhosg
a944623dae ixp4xx: nuke 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31663 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:44 +00:00
juhosg
93692ad86e ixp4xx: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31662 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:43 +00:00
juhosg
fb3eca1a8e mpc85xx: remove 2.6.38 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31661 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:41 +00:00
juhosg
b39529458d mpc85xx: switch to 3.3 and add broken flag 
It is compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31660 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:39 +00:00
juhosg
eff5ef6a36 orion: nuke 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31659 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:38 +00:00
juhosg
56d769bd1e orion: switch to 3.3 and add broken flag 
It is compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31658 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:37 +00:00
juhosg
4672c91460 linux/3.3: add missing RTC symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31654 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:30 +00:00
juhosg
9179b1bd6b ar71xx: fix build error if PCI is disabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31646 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 21:16:22 +00:00
juhosg
fe2be6a9a3 kernel: update linux 3.3 to 3.3.5 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 20:11:43 +00:00
juhosg
6365d3e544 pxa: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31643 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 17:40:15 +00:00
juhosg
15b93cf7b1 pxa: switch to 3.3 and mark it as broken 
It is working in qemu, but it has not been tested on real hardware.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31642 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 17:40:09 +00:00
juhosg
74bfc39816 pxa: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31641 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 17:40:06 +00:00
jow
d0c031a4f5 atheros: Fix compilation 
With our recent switch to the 3.3 kernel target, some headers were
occidentally omitted.

Signed-off-by: Jonathan Bither <jonbither@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31640 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 17:06:39 +00:00
jogo
35009bdf80 bcm63xx: fix a race between PCI bus scan and fallback sprom registration 
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.

Fixes #11384.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31638 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 21:25:34 +00:00
nbd
d4d537811b kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31637 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 21:19:14 +00:00
hauke
126cc381b7 brcm47xx: add gpio_request_one() 
This fixes a compile error with kernel 3.3.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31635 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 20:44:37 +00:00
nbd
849a172d03 atheros: clean up the patches some more 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 17:15:00 +00:00
nbd
f31721e174 atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31625 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 17:08:30 +00:00
jogo
0f0f3b9f5a AR7: don't mark as broken 
Linux 3.3.4 boots fine on my AR7 device.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31623 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 14:04:19 +00:00
juhosg
91b12f1c40 ar7: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31617 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:32:43 +00:00
juhosg
7d657a9c91 ar7: switch to 3.3 and mark the target as broken 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31616 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:32:41 +00:00
juhosg
02fb20885e ar7: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31615 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:32:39 +00:00
juhosg
1ee5e640f0 ar7: fix kernel_entry extraction 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31614 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:32:36 +00:00
juhosg
0cff4f29f3 ar71xx: add profile and build image for the TL-WR1041N v2 board 
Patch-by: Vince Huang <axishero@foxmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31610 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:02:41 +00:00
juhosg
7b820da93e ar71xx: add support for the TP-Link TL-WR1041N v2 board 
Patch-by: Vince Huang <axishero@foxmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31608 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:02:35 +00:00
juhosg
1c9cad5dce ar71xx: update 3.3 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31602 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 13:56:35 +00:00
juhosg
c39d550e2f ar71xx: fix a typo in the db120 mach file 
Reported-by: Sven Eckelmann <sven@narfation.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31601 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 13:56:30 +00:00
hauke
34b32d26b5 brcm47xx: update target to kernel 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31599 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 12:53:37 +00:00
juhosg
a6a62009fb linux/2.6.32: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31597 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:34 +00:00
juhosg
e3bebfe1fb rdc: remove 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31596 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:32 +00:00
juhosg
9ca85294f4 rdc: switch to 3.3 and mark the target as broken 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31595 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:30 +00:00
juhosg
7fa6105b4e rb532: remove 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31594 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:29 +00:00
juhosg
651eb17ddc rb532: switch to 3.3 and mark the target broken 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:26 +00:00
juhosg
dc1df9e044 rb532: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31592 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:23 +00:00
juhosg
321be1fc52 mpc83xx: remove broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31591 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:21 +00:00
juhosg
f3c883c98f mpc83xx: populate network config from an uci-default script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31590 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:19 +00:00
juhosg
109443b2af mpc83xx: cleanup rb333.dts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31589 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:16 +00:00
juhosg
d5816c8a83 mpc83xx: fix MAC addresses on the RB333 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31588 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:13 +00:00
juhosg
5dad28165e mpc83xx: fix build warnings in RB333/600 dtb wrappers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31587 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:10 +00:00
juhosg
796592856f linux/2.6.32: fix layer7 patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31586 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 07:20:13 +00:00
kaloz
73229f8d12 [omap4]: upgrade to 3.3, enable framebuffer 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31576 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-03 21:51:58 +00:00
jogo
4e31867a39 adm5120: add missing NULL terminator to partition parser list 
Fixes #11372.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31574 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-03 21:03:50 +00:00
hauke
14f0acdc28 brcm47xx: add support for kernel 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31573 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-03 20:18:41 +00:00
juhosg
9d3fb21d4a Fix iptables abuse of kernel header files. Use exported headers instead. 
[juhosg: export xt_layer7.h for all kernel versions]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31566 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-03 09:43:10 +00:00
juhosg
439a47e380 ramips: W306R V2.0 - GPIO and Network fixes 
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 19:17:59 +00:00
juhosg
1f249922ce ramips: Make serial console for DIR-300-B1 work again 
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 19:17:58 +00:00
juhosg
371f652cf1 mpc83xx: remove 2.6.36 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 18:27:26 +00:00
juhosg
d316e764cb mpc83xx: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 18:27:25 +00:00
juhosg
01415999cf mpc83xx: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 18:27:22 +00:00
juhosg
4b296a3cb3 linux/3.3: add more missing symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31552 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 18:27:19 +00:00
florian
a1c9b29340 [brcm63xx] use a define for the poll and debounce interval 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 15:40:26 +00:00
juhosg
c5006eede0 linux/3.3: add more missing symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-01 08:00:26 +00:00
juhosg
a12fd13e23 move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-01 08:00:25 +00:00
kaloz
7e7649baa9 [coldfire]: switch to 2.6.38 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31546 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-01 07:00:17 +00:00
juhosg
e51f7c5d1b kernel: update linux 3.3 to 3.3.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-30 08:38:11 +00:00
juhosg
1cfcccb5b0 linux: rtl836x: add a generic reset_switch function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31536 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:31 +00:00
juhosg
5df734f0bc linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:29 +00:00
juhosg
1dcdbf2d3f linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:26 +00:00
juhosg
f07500066e ar71xx: allow to disable link polling on unused PHYs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:24 +00:00
juhosg
b20dcb287e rb532: remove 2.6.35 support 
The generic 2.6.35 support has been remove long time ago.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 16:56:07 +00:00
juhosg
8ca642965f linux/3.3: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31531 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 16:56:03 +00:00
juhosg
be6aa90ec2 rdc: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31530 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:59:49 +00:00
juhosg
8e06d437aa mpc85xx: add support for 3.3 
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31529 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:55:28 +00:00
juhosg
c3bfb23a87 orion: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31528 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:20:40 +00:00
juhosg
418e0144a0 linux/3.3: yet another missing symbol 
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31527 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:08:24 +00:00
juhosg
d2863cfd2d linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip 
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:08:22 +00:00
juhosg
3adac4c8e4 mpc85xx: add kmod-booke-wdt to the default packages 
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31523 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:38 +00:00
juhosg
e4a752ed29 mpc85xx: don't override CONFIG_WATHCDOG 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31521 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:36 +00:00
juhosg
95fc5670e1 linux: move CONFIG_BOOKE_WDT to the generic config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31520 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:34 +00:00
juhosg
afab35ea6e linux/2.6.36: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31519 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:33 +00:00
juhosg
b2fc0c6423 linux: add broken flag to targets which are using 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31518 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:32 +00:00
juhosg
3fa6652791 adm5120: create a new subtarget for the RB1xx devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:46 +00:00
juhosg
d50d82ab6e adm5120: share a common kernel config between the subtargets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31512 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:44 +00:00
juhosg
0c3e51f31c adm5120: merge 3.3 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31511 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:43 +00:00
juhosg
71b94eaba4 adm5120: remove 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31510 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:37 +00:00
juhosg
064b1182e5 adm5120: switch to 3.3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31509 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:36 +00:00
juhosg
f2d86d5a21 adm5120: fix macronix bootloc patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31508 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:35 +00:00
juhosg
399af78951 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31507 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:33 +00:00
juhosg
a7eaf12ead adm8668: merge 3.3 fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31497 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-28 10:41:43 +00:00
juhosg
d9edbe9c04 adm8668: nuke 2.6.36 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31496 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-28 10:39:47 +00:00
juhosg
f127c4c7b0 adm8668: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31495 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-28 10:38:53 +00:00
florian
8812c9e533 [brcm63xx] switch to gpio-keys-polled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31491 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-27 16:44:48 +00:00
juhosg
ccfe94d5e5 linux/3.3: yet another missing symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31488 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-27 06:31:43 +00:00
hauke
b2caa2e0b5 brcm47xx: BCMA - Modified PCI CFG space access 
The existing code (prior to the patch) does an "ioremap_nocache" on a
subset of a memory region that I think has already been mapped, and then
un-maps that smaller region when it is finished.

Thanks Nathan Hintz for the patch



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31481 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 20:32:17 +00:00
juhosg
fade685a5b adm8668: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31480 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 18:53:49 +00:00
juhosg
b2a1169d98 adm8668: build gzip compressed uImage for testing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31479 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 18:53:48 +00:00
juhosg
c363d3b566 adm8668: use a suffix for initramfs images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31478 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 18:53:46 +00:00
juhosg
1d61105c25 ar71xx: enable MIB counters in the built-in switch of the AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31476 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 13:02:11 +00:00
juhosg
efae7066fc adm5120: remove 2.6.38 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31475 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 12:57:35 +00:00
juhosg
05735d303b adm5120: add 3.3 support 
Partially based on the 3.1 patches by Hartmut Knaack <knaack.h [at] gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31474 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 12:57:33 +00:00
juhosg
0e8ddda2ee linux/3.3: fix compiler warnings in the plat_nand driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31473 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 12:57:29 +00:00
juhosg
5d61cfe7e3 adm5120: make 5GXi depends on CPU_LITTLE_ENDIAN 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31472 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 12:57:26 +00:00
hauke
91a591d328 brcm47xx: A couple of other (inconsequential) BCMA patches 
Noticed these while reviewing the code.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31471 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 21:56:42 +00:00
hauke
ee396d93e1 brcm47xx: b44 fix workaround detection on some brcm47xx boards 
Because of api change of nvram_getenv, the workaround failed to detect the hardware.

Based on patch by b.sander

Fixes #11268.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31470 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 20:35:46 +00:00
jogo
50d9e73cdf bcm63xx: drop linux 3.2 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31464 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 11:49:27 +00:00
jogo
7a0767fe77 bcm63xx: drop linux 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31463 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 11:49:24 +00:00
jogo
30f433f1b9 bcm63xx: switch kernel to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31462 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 11:49:19 +00:00
juhosg
7318bf5df0 ar71xx: TL-WR741NDv4: add WLAN LED config 
On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31461 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 11:38:44 +00:00
jogo
aa09643423 kernel: update linux 3.3 to 3.3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31460 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 09:25:38 +00:00
jogo
b628e1e894 kernel: update linux 3.2 to 3.2.16 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31459 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 09:25:35 +00:00
jogo
c2cc410c54 kernel: add some more missing kernel config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 09:25:32 +00:00
jow
5deef26972 [generic] enable NF_CONNTRACK_PROCFS for Linux 3.3, required for /proc/net/nf_conntrack (#11339) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 00:55:57 +00:00
juhosg
81896ccacb x86: restore config-default, it is needed for 2.6.39 
Reported-by: Thomas Heil <heil@terminal-consulting.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31452 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 16:56:08 +00:00
juhosg
4e19be80f8 ramips: rt305x: add support for the UR-336UN board 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31451 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 16:56:06 +00:00
juhosg
06add57343 ramips: rt305x: add support for the Asus WL-330N3G board 
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 16:56:05 +00:00
florian
fbad451aa0 [malta] switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31448 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 12:33:30 +00:00
florian
93bbaa79c6 [malta] add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 12:33:27 +00:00
florian
da04a5b2b3 [uml] switch to 3.3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 12:33:24 +00:00
florian
9b5873bbb0 [uml] add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31445 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 12:33:19 +00:00
blogic
20486e3d63 [lantiq] Adding wifi eeprom extract for ARV752DPW - Easybox 802 
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31443 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 09:40:37 +00:00
nbd
038eed6f69 ar8216: enable forwarding of multicast frames to the cpu port on ar8327 (thx, SeG) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31441 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-22 19:19:49 +00:00
claudio
c5151773ad [at91] flexibity: Cleanup the subtarget config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-22 16:56:10 +00:00
claudio
28aee0e335 [at91] tqma9263: update board definition for 3.x series and fix config choose 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31436 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-22 09:09:53 +00:00
claudio
a559a0ea16 [at91] Remove old netus board definition 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31435 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-22 09:09:50 +00:00
juhosg
8480a04b3a ep93xx: remove 2.6.39 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31434 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-22 07:20:55 +00:00
juhosg
1961ecdaf1 amazon: remove 2.6.3{0,2} support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31433 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-22 07:20:53 +00:00
juhosg
8012e885db omap24xx: remove 2.6.38 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31426 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 17:16:40 +00:00
juhosg
b03afdd9be xburst: remove 2.6.36 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31422 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 17:03:10 +00:00
juhosg
7672aac1eb malta: remove 2.6.39 and 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31421 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:56:15 +00:00
juhosg
d4020d23e1 mpc83xx: remove 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31420 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:51:59 +00:00
juhosg
4595ebf495 octeon: remove 2.6.30 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31419 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:45:32 +00:00
juhosg
d71e7bf38e cns3xxx: remove 2.6.31 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31418 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:42:05 +00:00
juhosg
91690a98ac au1000: remove 2.6.39 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31416 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:30:40 +00:00
juhosg
955f287cac x86: remove 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31415 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:17:48 +00:00
juhosg
a33f77b6ec ixp4xx: remove 2.6.3{2,8} and 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31414 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:17:46 +00:00
juhosg
407157942b linux/2.6.31: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31412 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 15:18:58 +00:00
juhosg
f480dd5941 linux/2.6.30: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31411 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 15:18:55 +00:00
juhosg
696e0160a5 linux: add broken flag to targets which are using 2.6.30 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31410 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 15:18:54 +00:00
juhosg
3d51befa3b linux/3.3: nuke the gpio_buttons patch 
It is superseded by the in-kernel gpio-keys-polled driver.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31409 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 14:26:35 +00:00
juhosg
30a263e82e mpc52xx: nuke 3.2 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31408 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:36:47 +00:00
juhosg
0e01c6c25c mpc52xx: switch to 3.3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31407 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:36:45 +00:00
juhosg
e47ded8763 mpc52xx: add kernel config for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31406 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:36:44 +00:00
juhosg
085e737330 ramips: nuke 3.2 suport 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31405 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:53 +00:00
juhosg
caef9edf07 ramips: switch to 3.3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31404 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:51 +00:00
juhosg
0f71b77a13 ramips: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31403 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:50 +00:00
juhosg
e958af1110 ramips: rt305x: add OHCI/EHCI registration code for RT3352 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31402 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:48 +00:00
juhosg
3ff5d8da9a ramips: rt305x: fix CPU clock detection on RT3352 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31401 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:47 +00:00
juhosg
feaef768b3 ramips: rt305x: use different memory size setup for RT3352 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31400 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:45 +00:00
juhosg
fe6030a2b7 ramips: rt3883: add profile and build sysupgrade image for the RT-N56U 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31399 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:44 +00:00
juhosg
219147642d ramips: add swconfig to the default package list 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31398 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:43 +00:00
juhosg
dbbeae59d9 ramips: build initramfs image for the Fonera 2.0N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31397 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:42 +00:00
juhosg
266880e202 ramips: rt305x: add initial support for Tenda W306R V2.0 
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31396 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:40 +00:00
juhosg
ca5d81b44b ramips: remove hardcoded console parameter from kernel configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31395 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:30 +00:00