1
0
mirror of git://projects.qi-hardware.com/xburst-tools.git synced 2024-12-23 15:05:29 +02:00

mv some .h file to src/ there are same files.

This commit is contained in:
xiangfu 2008-08-16 10:24:29 -04:00
parent 7c0e35e1a2
commit 4adc376ba2
5 changed files with 2 additions and 177 deletions

View File

@ -64,9 +64,9 @@ ${OBJS}:${SRCS}
${UDFU_IMAGE}:${OBJS}
$(LD) ${LDFLAGS} -T$(LDS) -g $(OBJS) -o ${TARGET} ${LIBS}
$(OBJCOPY) -O binary -S ${TARGET} ${IMAGE}
$(OBJDUMP) -D ${TARGET} >${IMAGE}.dis
$(MKUDFU) -v ${UDFU_VID} -p ${UDFU_PID} -r ${UDFU_REV} \
-d ${IMAGE} ${UDFU_IMAGE}
$(OBJDUMP) -D ${TARGET} >${IMAGE}.dis
blink_led:src/led_on.S
$(CC) $(CFLAGS) led_on.o led_on.S

View File

@ -1,42 +0,0 @@
/*
* (C) Copyright 2007 OpenMoko, Inc.
* Author: xiangfu liu <xiangfu@openmoko.org>
*
* Configuation settings for the FIC Neo GTA02 Linux GSM phone
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __BLINK_LED_H
#define __BLINK_LED_H
#define GPBCON (*(volatile unsigned *)0x56000010)
#define GPBDAT (*(volatile unsigned *)0x56000014)
#define GPBDW (*(volatile unsigned *)0x56000018)
#define ORANGE_OFF() (GPBDAT &= ~(0x1))
#define BLUE_OFF() (GPBDAT &= ~(0x2))
#define ORANGE_ON() (GPBDAT |= (0x1))
#define BLUE_ON() (GPBDAT |= (0x2))
#define ORANGE 1;
#define BLUE 0;
int orange_on(int times);
int blue_on(int times);
int blink_led(void);
int delay(int time);
#endif /* __BLINK_LED_H */

View File

@ -1,22 +0,0 @@
/*
* nand_read.c: Simple NAND read functions for booting from NAND
*
* This is used by cpu/arm920/start.S assembler code,
* and the board-specific linker script must make sure this
* file is linked within the first 4kB of NAND flash.
*
* Taken from GPLv2 licensed vivi bootloader,
* Copyright (C) 2002 MIZI Research, Inc.
*
* Author: Hwang, Chideok <hwang@mizi.com>
* Date : $Date: 2004/02/04 10:37:37 $
*
* u-boot integration and bad-block skipping (C) 2006 by OpenMoko, Inc.
* Author: Harald Welte <laforge@openmoko.org>
*/
#ifndef __NAND_READ_H
#define __NAND_READ_H
int nand_read_ll(unsigned char *buf, unsigned long start_addr, int size);
#endif /* __NAND_READ_H */

View File

@ -1,112 +0,0 @@
/*
* (C) Copyright 2007 OpenMoko, Inc.
* Author: xiangfu liu <xiangfu@openmoko.org>
*
* Configuation settings for the FIC Neo GTA02 Linux GSM phone
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __SERIAL_H__
#define __SERIAL_H__
#define UART0 0
#define UART1 1
#define UART2 2
#define rGPHCON (*(volatile unsigned *)0x56000070) /*UART 0 Line control*/
#define rULCON0 (*(volatile unsigned *)0x50000000) /*UART 0 Line control*/
#define rUCON0 (*(volatile unsigned *)0x50000004) /*UART 0 Control*/
#define rUFCON0 (*(volatile unsigned *)0x50000008) /*UART 0 FIFO control*/
#define rUMCON0 (*(volatile unsigned *)0x5000000c) /*UART 0 Modem control*/
#define rUTRSTAT0 (*(volatile unsigned *)0x50000010) /*UART 0 Tx/Rx status*/
#define rUERSTAT0 (*(volatile unsigned *)0x50000014) /*UART 0 Rx error status*/
#define rUFSTAT0 (*(volatile unsigned *)0x50000018) /*UART 0 FIFO status*/
#define rUMSTAT0 (*(volatile unsigned *)0x5000001c) /*UART 0 Modem status*/
#define rUBRDIV0 (*(volatile unsigned *)0x50000028) /*UART 0 Baud rate divisor*/
#define rULCON1 (*(volatile unsigned *)0x50004000) /*UART 1 Line control*/
#define rUCON1 (*(volatile unsigned *)0x50004004) /*UART 1 Control*/
#define rUFCON1 (*(volatile unsigned *)0x50004008) /*UART 1 FIFO control*/
#define rUMCON1 (*(volatile unsigned *)0x5000400c) /*UART 1 Modem control*/
#define rUTRSTAT1 (*(volatile unsigned *)0x50004010) /*UART 1 Tx/Rx status*/
#define rUERSTAT1 (*(volatile unsigned *)0x50004014) /*UART 1 Rx error status*/
#define rUFSTAT1 (*(volatile unsigned *)0x50004018) /*UART 1 FIFO status*/
#define rUMSTAT1 (*(volatile unsigned *)0x5000401c) /*UART 1 Modem status*/
#define rUBRDIV1 (*(volatile unsigned *)0x50004028) /*UART 1 Baud rate divisor*/
#define rULCON2 (*(volatile unsigned *)0x50008000) /*UART 2 Line control*/
#define rUCON2 (*(volatile unsigned *)0x50008004) /*UART 2 Control*/
#define rUFCON2 (*(volatile unsigned *)0x50008008) /*UART 2 FIFO control*/
#define rUTRSTAT2 (*(volatile unsigned *)0x50008010) /*UART 2 Tx/Rx status*/
#define rUERSTAT2 (*(volatile unsigned *)0x50008014) /*UART 2 Rx error status*/
#define rUFSTAT2 (*(volatile unsigned *)0x50008018) /*UART 2 FIFO status*/
#define rUBRDIV2 (*(volatile unsigned *)0x50008028) /*UART 2 Baud rate divisor*/
#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000020)=(unsigned char)(ch)
#define RdURXH0() (*(volatile unsigned char *)0x50000024)
#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004020)=(unsigned char)(ch)
#define RdURXH1() (*(volatile unsigned char *)0x50004024)
#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008020)=(unsigned char)(ch)
#define RdURXH2() (*(volatile unsigned char *)0x50008024)
// I/O PORT
#define rGPACON (*(volatile unsigned *)0x56000000)
#define rGPADAT (*(volatile unsigned *)0x56000004)
#define rGPBCON (*(volatile unsigned *)0x56000010)
#define rGPBDAT (*(volatile unsigned *)0x56000014)
#define rGPBUP (*(volatile unsigned *)0x56000018)
#define rGPCCON (*(volatile unsigned *)0x56000020)
#define rGPCDAT (*(volatile unsigned *)0x56000024)
#define rGPCUP (*(volatile unsigned *)0x56000028)
#define rGPDCON (*(volatile unsigned *)0x56000030)
#define rGPDDAT (*(volatile unsigned *)0x56000034)
#define rGPDUP (*(volatile unsigned *)0x56000038)
#define rGPECON (*(volatile unsigned *)0x56000040)
#define rGPEDAT (*(volatile unsigned *)0x56000044)
#define rGPEUP (*(volatile unsigned *)0x56000048)
#define rGPFCON (*(volatile unsigned *)0x56000050)
#define rGPFDAT (*(volatile unsigned *)0x56000054)
#define rGPFUP (*(volatile unsigned *)0x56000058)
#define rGPGCON (*(volatile unsigned *)0x56000060)
#define rGPGDAT (*(volatile unsigned *)0x56000064)
#define rGPGUP (*(volatile unsigned *)0x56000068)
#define rGPHCON (*(volatile unsigned *)0x56000070)
#define rGPHDAT (*(volatile unsigned *)0x56000074)
#define rGPHUP (*(volatile unsigned *)0x56000078)
#define rGPJCON (*(volatile unsigned *)0x560000d0) //Port J control
#define rGPJDAT (*(volatile unsigned *)0x560000d4) //Port J data
#define rGPJUP (*(volatile unsigned *)0x560000d8) //Port J data
void port_init(void);
void serial_init (const int uart);
void serial_putc (const int uart,const char c);
int printk(const char *fmt, ...);
int puts(const char *string);
#endif

View File

@ -37,5 +37,6 @@
int orange_on(int times);
int blue_on(int times);
int blink_led(void);
int delay(int time);
#endif /* __BLINK_LED_H */