1
0
mirror of git://projects.qi-hardware.com/xburst-tools.git synced 2024-11-01 16:24:04 +02:00

qi-add-sc36410-mci.patch

This heavily adapts the Samsung U-Boot hs_mmc code and combines it with the
SD / SDHC startup code written for glamo-mci stuff that is known to work OK
with common SD and SDHC.

tla01 is changed to use the implementation.

Signed-off-by: Andy Green <andy@openmoko.com>
This commit is contained in:
Andy Green 2008-11-28 10:16:40 +00:00 committed by Andy Green
parent 4e326e29fa
commit 82d2e255c3
11 changed files with 1416 additions and 79 deletions

View File

@ -44,8 +44,6 @@ SRCS = ${S_SRCS} ${C_SRCS}
OBJS = ${S_OBJS} ${C_OBJS} OBJS = ${S_OBJS} ${C_OBJS}
LIBS = -L${COMPILER_LIB_PATH} -lgcc LIBS = -L${COMPILER_LIB_PATH} -lgcc
OBJS = src/cpu/s3c6410/start.o src/cpu/s3c6410/start_qi.o src/cpu/s3c6410/serial-s3c64xx.o src/ctype.o src/utils.o src/cpu/s3c6410/tla01.o src/phase2.o
# GTA02 A5 and A6 U-Boot will eat these for DFU action # GTA02 A5 and A6 U-Boot will eat these for DFU action
UDFU_VID = 0x1d50 UDFU_VID = 0x1d50
UDFU_PID = 0x5119 UDFU_PID = 0x5119

View File

@ -0,0 +1,382 @@
/*
* Header for MultiMediaCard (MMC)
*
* Copyright 2002 Hewlett-Packard Company
*
* Use consistent with the GNU GPL is permitted,
* provided that this copyright notice is
* preserved in its entirety in all copies and derived works.
*
* HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
* FITNESS FOR ANY PARTICULAR PURPOSE.
*
* Many thanks to Alessandro Rubini and Jonathan Corbet!
*
* Based strongly on code by:
*
* Author: Yong-iL Joh <tolkien@mizi.com>
* Date : $Date: 2006/12/06 02:50:52 $
*
* Author: Andrew Christian
* 15 May 2002
*/
#ifndef MMC_MMC_PROTOCOL_H
#define MMC_MMC_PROTOCOL_H
#ifdef CONFIG_SUPPORT_MMC_PLUS
/* Standard MMC commands (4.2) type argument response */
#else
/* Standard MMC commands (3.1) type argument response */
#endif
/* class 1 */
#define MMC_GO_IDLE_STATE 0 /* bc */
#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */
#define MMC_ALL_SEND_CID 2 /* bcr R2 */
#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
#define MMC_SET_DSR 4 /* bc [31:16] RCA */
#define MMC_SWITCH 6 /* ac R1b */
#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
#define MMC_SEND_EXT_CSD 8 /* adtc R1 */
#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */
#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */
#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
#define MMC_STOP_TRANSMISSION 12 /* ac R1b */
#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
#define MMC_BUSTEST_R 14 /* adtc R1 */
#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */
#define MMC_BUSTEST_W 19 /* adtc R1 */
/* class 2 */
#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */
#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */
#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */
/* class 3 */
#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
/* class 4 */
#define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */
#define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */
#define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */
#define MMC_PROGRAM_CID 26 /* adtc R1 */
#define MMC_PROGRAM_CSD 27 /* adtc R1 */
/* class 6 */
#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
#define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */
/* class 5 */
#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
#define MMC_ERASE 38 /* ac R1b */
/* class 9 */
#define MMC_FAST_IO 39 /* ac <Complex> R4 */
#define MMC_GO_IRQ_STATE 40 /* bcr R5 */
/* class 7 */
#define MMC_LOCK_UNLOCK 42 /* adtc R1b */
/* class 8 */
#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */
/* SD commands type argument response */
/* class 8 */
/* This is basically the same command as for MMC with some quirks. */
#define SD_SEND_RELATIVE_ADDR 3 /* ac R6 */
/* Application commands */
#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */
#define SD_APP_SEND_SCR 51 /* adtc R1 */
/*
MMC status in R1
Type
e : error bit
s : status bit
r : detected and set for the actual command response
x : detected and set during command execution. the host must poll
the card by sending status command in order to read these bits.
Clear condition
a : according to the card state
b : always related to the previous command. Reception of
a valid command will clear it (with a delay of one command)
c : clear by read
*/
#define R1_OUT_OF_RANGE (1 << 31) /* er, c */
#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */
#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */
#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */
#define R1_ERASE_PARAM (1 << 27) /* ex, c */
#define R1_WP_VIOLATION (1 << 26) /* erx, c */
#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */
#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */
#define R1_COM_CRC_ERROR (1 << 23) /* er, b */
#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */
#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */
#define R1_CC_ERROR (1 << 20) /* erx, c */
#define R1_ERROR (1 << 19) /* erx, c */
#define R1_UNDERRUN (1 << 18) /* ex, c */
#define R1_OVERRUN (1 << 17) /* ex, c */
#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */
#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */
#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */
#define R1_ERASE_RESET (1 << 13) /* sr, c */
#define R1_STATUS(x) (x & 0xFFFFE000)
#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
#define R1_READY_FOR_DATA (1 << 8) /* sx, a */
#define R1_APP_CMD (1 << 5) /* sr, c */
/*
MMC CURRENT_STATE in R1 [12:9]
*/
#define STATE_IDLE (0x0 << 9) /* 0 */
#define STATE_READY (0x1 << 9) /* 1 */
#define STATE_IDENT (0x2 << 9) /* 2 */
#define STATE_STBY (0x3 << 9) /* 3 */
#define STATE_TRAN (0x4 << 9) /* 4 */
#define STATE_DATA (0x5 << 9) /* 5 */
#define STATE_RCV (0x6 << 9) /* 6 */
#define STATE_PRG (0x7 << 9) /* 7 */
#define STATE_DIS (0x8 << 9) /* 8 */
#define STATE_BTST (0x9 << 9) /* 9 */
/* These are unpacked versions of the actual responses */
struct _mmc_csd {
u8 csd_structure;
u8 spec_vers;
u8 taac;
u8 nsac;
u8 tran_speed;
u16 ccc;
u8 read_bl_len;
u8 read_bl_partial;
u8 write_blk_misalign;
u8 read_blk_misalign;
u8 dsr_imp;
u16 c_size;
u8 vdd_r_curr_min;
u8 vdd_r_curr_max;
u8 vdd_w_curr_min;
u8 vdd_w_curr_max;
u8 c_size_mult;
union {
struct { /* MMC system specification version 3.1 */
u8 erase_grp_size;
u8 erase_grp_mult;
} v31;
struct { /* MMC system specification version 2.2 */
u8 sector_size;
u8 erase_grp_size;
} v22;
} erase;
u8 wp_grp_size;
u8 wp_grp_enable;
u8 default_ecc;
u8 r2w_factor;
u8 write_bl_len;
u8 write_bl_partial;
u8 file_format_grp;
u8 copy;
u8 perm_write_protect;
u8 tmp_write_protect;
u8 file_format;
u8 ecc;
};
struct _mmc_ext_csd {
u8 s_cmd_set;
u32 sec_count;
u8 MIN_PERF_W_8_52;
u8 MIN_PERF_R_8_52;
u8 MIN_PERF_W_8_26_4_52;
u8 MIN_PERF_R_8_26_4_52;
u8 MIN_PERF_W_4_26;
u8 MIN_PERF_R_4_26;
u8 PWR_CL_26_360;
u8 PWR_CL_52_360;
u8 PWR_CL_26_195;
u8 PWR_CL_52_195;
u8 card_type;
u8 csd_structure;
u8 ext_csd_rev;
u8 cmd_set;
u8 cmd_set_rev;
u8 power_class;
u8 hs_timing;
u8 bus_width;
};
#define MMC_VDD_145_150 0x00000001 /* VDD voltage 1.45 - 1.50 */
#define MMC_VDD_150_155 0x00000002 /* VDD voltage 1.50 - 1.55 */
#define MMC_VDD_155_160 0x00000004 /* VDD voltage 1.55 - 1.60 */
#define MMC_VDD_160_165 0x00000008 /* VDD voltage 1.60 - 1.65 */
#define MMC_VDD_165_170 0x00000010 /* VDD voltage 1.65 - 1.70 */
#define MMC_VDD_17_18 0x00000020 /* VDD voltage 1.7 - 1.8 */
#define MMC_VDD_18_19 0x00000040 /* VDD voltage 1.8 - 1.9 */
#define MMC_VDD_19_20 0x00000080 /* VDD voltage 1.9 - 2.0 */
#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
#define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */
#define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */
#define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */
#define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */
#define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */
#define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */
#define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */
#define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */
#define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */
#define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */
#define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */
#define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */
#define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */
#define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */
#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */
#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */
/*
* Card Command Classes (CCC)
*/
#define CCC_BASIC (1<<0) /* (0) Basic protocol functions */
/* (CMD0,1,2,3,4,7,9,10,12,13,15) */
#define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */
/* (CMD11) */
#define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */
/* (CMD16,17,18) */
#define CCC_STREAM_WRITE (1<<3) /* (3) Stream write commands */
/* (CMD20) */
#define CCC_BLOCK_WRITE (1<<4) /* (4) Block write commands */
/* (CMD16,24,25,26,27) */
#define CCC_ERASE (1<<5) /* (5) Ability to erase blocks */
/* (CMD32,33,34,35,36,37,38,39) */
#define CCC_WRITE_PROT (1<<6) /* (6) Able to write protect blocks */
/* (CMD28,29,30) */
#define CCC_LOCK_CARD (1<<7) /* (7) Able to lock down card */
/* (CMD16,CMD42) */
#define CCC_APP_SPEC (1<<8) /* (8) Application specific */
/* (CMD55,56,57,ACMD*) */
#define CCC_IO_MODE (1<<9) /* (9) I/O mode */
/* (CMD5,39,40,52,53) */
#define CCC_SWITCH (1<<10) /* (10) High speed switch */
/* (CMD6,34,35,36,37,50) */
/* (11) Reserved */
/* (CMD?) */
/*
* CSD field definitions
*/
#define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */
#define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */
#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 */
#define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */
#define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */
#define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */
#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 */
#define CSD_SPEC_VER_4 4 /* Implements system specification 4.0 ~ 4.2 */
/*
* SD bus widths
*/
#define SD_BUS_WIDTH_1 0
#define SD_BUS_WIDTH_4 2
/*
* EXT_CSD field definitions
*/
/*
* S_CMD_SET
*/
#define STANDARD_MMC 0 /* Standard MMC */
#define SECURE_MMC 1 /* Secure MMC */
#define CPS_MMC 2 /* Content Protection Secure MMC */
#define SECURE_MMC_2 3 /* Secure MMC 2.0 */
#define ATA_MMC 4 /* ATA on MMC */
/*
* MIN_PERF_a_b_ff
*/
#define NO_CLASS 0x0 /* For cards not reaching the 2.4MB/s minimum value */
#define CLASS_A 0x08 /* Class A */
#define CLASS_B 0x0A /* Class B */
#define CLASS_C 0x0F /* Class C */
#define CLASS_D 0x14 /* Class D */
#define CLASS_E 0x1E /* Class E */
#define CLASS_F 0x28 /* Class F */
#define CLASS_G 0x32 /* Class G */
#define CLASS_H 0x3c /* Class H */
#define CLASS_J 0x46 /* Class J */
#define CLASS_K 0x50 /* Class E */
#define CLASS_M 0x64 /* Class M */
#define CLASS_O 0x78 /* Class O */
#define CLASS_R 0x8c /* Class R */
#define CLASS_T 0xa0 /* Class T */
/*
* CARD_TYPE
*/
#define MMCPLUS_26MHZ (1<<0)
#define MMCPLUS_52MHZ (1<<1)
/*
* EXT_CSD_REV
*/
#define EXT_CSD_REV_1_0 0
#define EXT_CSD_REV_1_1 1
#define EXT_CSD_REV_1_2 2
/*
* HS_TIMING
*/
#define HS_TIMING_LOW 0
#define HS_TIMING_HIGH 1
/*
* BUS_WIDTH
*/
#define MMCPLUS_BUS_WIDTH_1 0
#define MMCPLUS_BUS_WIDTH_4 1
#define MMCPLUS_BUS_WIDTH_8 2
/*
* ERASED_MEM_CONT
*/
#define ERASED_MEM_CONT_0 0
#define ERASED_MEM_CONT_1 1
/*
* Argument for CMD6
*/
/*
* EXT_CSD Access Modes
*/
#define EXT_CSD_COMMAND_SET 0
#define EXT_CSD_SET_BITS 1
#define EXT_CSD_CLEAR_BITS 2
#define EXT_CSD_WRITE_BYTE 3
/*
* EXT_CSD Argument Byte
*/
#define EXT_CSD_POWER_CLASS 187
#define EXT_CSD_BUS_WIDTH 183
#define EXT_CSD_HS_TIMING 185
#endif /* MMC_MMC_PROTOCOL_H */

120
qiboot/include/linux-mmc.h Normal file
View File

@ -0,0 +1,120 @@
/*
* linux/include/linux/mmc/mmc.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef MMC_H
#define MMC_H
/* removed by scsuh */
#if 0
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/device.h>
struct request;
struct mmc_data;
struct mmc_request;
#endif
#define MMC_RSP_PRESENT (1 << 0)
#define MMC_RSP_136 (1 << 1) /* 136 bit response */
#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
#define MMC_CMD_MASK (3 << 5) /* command type */
#define MMC_CMD_AC (0 << 5)
#define MMC_CMD_ADTC (1 << 5)
#define MMC_CMD_BC (2 << 5)
#define MMC_CMD_BCR (3 << 5)
/*
* These are the response types, and correspond to valid bit
* patterns of the above flags. One additional valid pattern
* is all zeros, which means we don't expect a response.
*/
#define MMC_RSP_NONE (0)
#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC)
#define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
/*
* These are the command types.
*/
#define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_MASK)
#define MMC_ERR_NONE 0
#define MMC_ERR_TIMEOUT 1
#define MMC_ERR_BADCRC 2
#define MMC_ERR_FIFO 3
#define MMC_ERR_FAILED 4
#define MMC_ERR_INVALID 5
struct mmc_command {
u32 opcode;
u32 arg;
u32 resp[4];
unsigned int flags; /* expected response type */
struct mmc_data *data; /* data segment associated with cmd */
struct mmc_request *mrq; /* associated request */
unsigned int retries; /* max number of retries */
unsigned int error; /* command error */
};
struct mmc_data {
unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */
unsigned int timeout_clks; /* data timeout (in clocks) */
unsigned int blksz_bits; /* data block size */
unsigned int blksz; /* data block size */
unsigned int blocks; /* number of blocks */
unsigned int error; /* data error */
unsigned int flags;
#define MMC_DATA_WRITE (1 << 8)
#define MMC_DATA_READ (1 << 9)
#define MMC_DATA_STREAM (1 << 10)
#define MMC_DATA_MULTI (1 << 11)
unsigned int bytes_xfered;
struct mmc_command *stop; /* stop command */
struct mmc_request *mrq; /* associated request */
unsigned int sg_len; /* size of scatter list */
struct scatterlist *sg; /* I/O scatter list */
};
struct mmc_request {
struct mmc_command *cmd;
struct mmc_data *data;
struct mmc_command *stop;
void *done_data; /* completion data */
void (*done)(struct mmc_request *);/* completion function */
};
struct mmc_host;
struct mmc_card;
extern int mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
extern int mmc_wait_for_app_cmd(struct mmc_host *, unsigned int,
struct mmc_command *, int);
extern int __mmc_claim_host(struct mmc_host *host, struct mmc_card *card);
static inline void mmc_claim_host(struct mmc_host *host)
{
__mmc_claim_host(host, (struct mmc_card *)-1);
}
extern void mmc_release_host(struct mmc_host *host);
#endif

View File

@ -36,9 +36,71 @@
#define S3C64XX_UART_CHANNELS 3 #define S3C64XX_UART_CHANNELS 3
#define S3C64XX_SPI_CHANNELS 2 #define S3C64XX_SPI_CHANNELS 2
#define HSMMC_CHANNEL 0
#define MOVI_INIT_REQUIRED 0
#define TCM_BASE 0x0C004000
#define BL2_BASE 0x57E00000
#define CopyMovitoMem(a,b,c,d,e) (((int(*)(int, uint, ushort, uint *, int))(*((uint *)(TCM_BASE + 0x8))))(a,b,c,d,e))
#define SS_SIZE (8 * 1024)
#define eFUSE_SIZE (1 * 1024) // 0.5k eFuse, 0.5k reserved`
#define PART_UBOOT_OFFSET 0x0
#define PART_ZIMAGE_OFFSET 0x40000
#define PART_ROOTFS_OFFSET 0x200000
#define PART_EXTRA_OFFSET 0x3200000
/* movinand definitions */
#define MOVI_BLKSIZE 512
#define MOVI_TOTAL_BLKCNT 7864320 // 7864320 // 3995648 // 1003520 /* static movinand total block count: for writing to movinand when nand boot */
#define MOVI_HIGH_CAPACITY 0
#define MOVI_LAST_BLKPOS (MOVI_TOTAL_BLKCNT - (eFUSE_SIZE / MOVI_BLKSIZE))
#define MOVI_BL1_BLKCNT (SS_SIZE / MOVI_BLKSIZE)
#define MOVI_ENV_BLKCNT (CFG_ENV_SIZE / MOVI_BLKSIZE)
#define MOVI_BL2_BLKCNT (((PART_ZIMAGE_OFFSET - PART_UBOOT_OFFSET) / MOVI_BLKSIZE) - MOVI_ENV_BLKCNT)
#define MOVI_ZIMAGE_BLKCNT ((PART_ROOTFS_OFFSET - PART_ZIMAGE_OFFSET) / MOVI_BLKSIZE)
#define MOVI_BL2_POS (MOVI_LAST_BLKPOS - MOVI_BL1_BLKCNT - MOVI_BL2_BLKCNT - MOVI_ENV_BLKCNT)
#ifndef __ASSEMBLY__
struct movi_offset_t {
uint last;
uint bl1;
uint env;
uint bl2;
uint zimage;
};
/* external functions */
extern void hsmmc_set_gpio(void);
extern void hsmmc_reset (void);
extern int hsmmc_init (void);
extern int movi_init(void);
extern void movi_set_capacity(void);
extern int movi_set_ofs(uint last);
extern void movi_write (uint addr, uint start_blk, uint blknum);
extern void movi_read (uint addr, uint start_blk, uint blknum);
extern void movi_write_env(ulong addr);
extern void movi_read_env(ulong addr);
#if defined(CONFIG_S3C2450)
extern ulong virt_to_phy_smdk2450(ulong addr);
#elif defined(CONFIG_S3C6400)
extern ulong virt_to_phy_smdk6400(ulong addr);
#elif defined(CONFIG_S3C6410)
extern ulong virt_to_phy_smdk6410(ulong addr);
#elif defined(CONFIG_S3C6430)
extern ulong virt_to_phy_smdk6430(ulong addr);
#elif defined(CONFIG_S3C2416)
extern ulong virt_to_phy_smdk2416(ulong addr);
#endif
extern void test_hsmmc (uint width, uint test, uint start_blk, uint blknum);
/* external variables */
extern struct movi_offset_t ofsinfo;
//#include <asm/hardware.h> //#include <asm/hardware.h>
#ifndef __ASSEMBLY__
typedef enum { typedef enum {
S3C64XX_UART0, S3C64XX_UART0,
S3C64XX_UART1, S3C64XX_UART1,

View File

@ -29,6 +29,10 @@
#include <neo_gta02.h> #include <neo_gta02.h>
#include <neo_gta03.h> #include <neo_gta03.h>
#define stringify2(s) stringify1(s)
#define stringify1(s) #s
extern void bootloader_second_phase(void); extern void bootloader_second_phase(void);
const struct board_api *boards[] = { const struct board_api *boards[] = {
@ -94,6 +98,22 @@ void start_qi(void)
this_board = boards[board++]; this_board = boards[board++];
} }
this_board->port_init();
/* stick some hello messages on debug console */
puts("\n\n\nQi Bootloader "stringify2(QI_CPU)" "
stringify2(BUILD_HOST)" "
stringify2(BUILD_VERSION)" "
"\n");
puts(stringify2(BUILD_DATE) " Copyright (C) 2008 Openmoko, Inc.\n");
puts("\n Detected: ");
puts(this_board->name);
puts(", ");
puts((this_board->get_board_variant)()->name);
/* /*
* jump to bootloader_second_phase() running from DRAM copy * jump to bootloader_second_phase() running from DRAM copy
*/ */

View File

@ -0,0 +1,683 @@
#include <qi.h>
#include "hs_mmc.h"
#include <string.h>
#include <glamo-mmc.h>
#define HCLK_OPERATION
#undef DEBUG_HSMMC
#ifdef DEBUG_HSMMC
#define dbg(x...) printf(x)
#else
#define dbg(x...) do { } while (0)
#endif
//#include <linux-mmc.h>
#include <linux-mmc-protocol.h>
#include <s3c6410.h>
//#include <linux/mmc/protocol.h>
//#include <asm/io.h>
//#include <movi.h>
#include "hs_mmc.h"
#include <mmc.h>
#define SDI_Tx_buffer_HSMMC (0x51000000)
#define SDI_Rx_buffer_HSMMC (0x51000000+(0x300000))
#define SDI_Compare_buffer_HSMMC (0x51000000+(0x600000))
#define Card_OneBlockSize_ver1 512
#define MMC_DEFAULT_RCA (1<<16)
/* Global variables */
static u32 rd_cnt_HSMMC;
//static u32 wt_cnt_HSMMC;
static u32 BlockNum_HSMMC = 0;
//static u32 WriteBlockCnt_INT = 0;
static u32 ReadBlockCnt_INT = 0;
//static u32 WRITEINT_DONE = 0;
//static u32 READINT_DONE = 0;
//static u32 COMPARE_INT_DONE = 0;
//static u32 CompareCnt_INT = 0;
//static u32 BufferBoundary_INT_Cnt = 0;
static u32 HS_DMA_END = 0;
//static u32 HS_CARD_DETECT = 0;
//static u32 ocr_check = 0;
//static u32 mmc_card = 0;
static u32 rca = 0;
static ulong HCLK;
//static u32 card_mid = 0;
int movi_hc = 1; /* sdhc style block indexing */
enum card_type card_type;
/* extern functions */
extern ulong get_HCLK(void);
#define s3c_hsmmc_readl(x) *((unsigned int *)(((ELFIN_HSMMC_BASE + (HSMMC_CHANNEL * 0x100000)) + (x))))
#define s3c_hsmmc_readw(x) *((unsigned short *)(((ELFIN_HSMMC_BASE + (HSMMC_CHANNEL * 0x100000)) + (x))))
#define s3c_hsmmc_readb(x) *((unsigned char *)(((ELFIN_HSMMC_BASE + (HSMMC_CHANNEL * 0x100000)) + (x))))
#define s3c_hsmmc_writel(v,x) *((unsigned int *) (((ELFIN_HSMMC_BASE + (HSMMC_CHANNEL * 0x100000)) + (x)))) = v
#define s3c_hsmmc_writew(v,x) *((unsigned short *)(((ELFIN_HSMMC_BASE + (HSMMC_CHANNEL * 0x100000)) + (x)))) = v
#define s3c_hsmmc_writeb(v,x) *((unsigned char *)(((ELFIN_HSMMC_BASE + (HSMMC_CHANNEL * 0x100000)) + (x)))) = v
#define readl(x) *((unsigned int *)(x))
#define writel(v, x) *((unsigned int *)(x)) = v
#define UNSTUFF_BITS(resp,start,size) \
({ \
const int __size = size; \
const u32 __mask = (__size < 32 ? 1 << __size : 0) - 1; \
const int __off = 3 - ((start) / 32); \
const int __shft = (start) & 31; \
u32 __res; \
\
__res = resp[__off] >> __shft; \
if (__size + __shft > 32) \
__res |= resp[__off-1] << ((32 - __shft) & 31); \
__res & __mask; \
})
static int wait_for_cmd_done (void)
{
u32 i;
ushort n_int, e_int;
dbg("wait_for_cmd_done\n");
for (i = 0; i < 0x20000000; i++) {
n_int = s3c_hsmmc_readw(HM_NORINTSTS);
dbg(" HM_NORINTSTS: %04x\n", n_int);
if (n_int & 0x8000)
/* any error */
break;
if (n_int & 0x0001)
/* command complete */
return 0;
}
e_int = s3c_hsmmc_readw(HM_ERRINTSTS);
s3c_hsmmc_writew(e_int, HM_ERRINTSTS);
s3c_hsmmc_writew(n_int, HM_NORINTSTS);
puts("cmd error1: 0x");
print32(e_int);
puts(", HM_NORINTSTS: 0x");
print32(n_int);
puts("\n");
return -1;
}
static void ClearCommandCompleteStatus(void)
{
s3c_hsmmc_writew(1 << 0, HM_NORINTSTS);
while (s3c_hsmmc_readw(HM_NORINTSTS) & 0x1) {
s3c_hsmmc_writew(1 << 0, HM_NORINTSTS);
}
}
static void card_irq_enable(ushort temp)
{
s3c_hsmmc_writew((s3c_hsmmc_readw(HM_NORINTSTSEN) & 0xFEFF) | (temp << 8), HM_NORINTSTSEN);
}
void hsmmc_reset (void)
{
s3c_hsmmc_writeb(0x3, HM_SWRST);
}
void hsmmc_set_gpio (void)
{
u32 reg;
reg = readl(GPGCON) & 0xf0000000;
writel(reg | 0x02222222, GPGCON);
reg = readl(GPGPUD) & 0xfffff000;
writel(reg, GPGPUD);
}
static void set_transfer_mode_register (u32 MultiBlk, u32 DataDirection, u32 AutoCmd12En, u32 BlockCntEn, u32 DmaEn)
{
s3c_hsmmc_writew((s3c_hsmmc_readw(HM_TRNMOD) & ~(0xffff)) | (MultiBlk << 5)
| (DataDirection << 4) | (AutoCmd12En << 2)
| (BlockCntEn << 1) | (DmaEn << 0), HM_TRNMOD);
// dbg("\nHM_TRNMOD = 0x%04x\n", HM_TRNMOD);
}
static void set_arg_register (u32 arg)
{
s3c_hsmmc_writel(arg, HM_ARGUMENT);
}
static void set_blkcnt_register(ushort uBlkCnt)
{
s3c_hsmmc_writew(uBlkCnt, HM_BLKCNT);
}
static void SetSystemAddressReg(u32 SysAddr)
{
s3c_hsmmc_writel(SysAddr, HM_SYSAD);
}
static void set_blksize_register(ushort uDmaBufBoundary, ushort uBlkSize)
{
s3c_hsmmc_writew((uDmaBufBoundary << 12) | (uBlkSize), HM_BLKSIZE);
}
static void ClearErrInterruptStatus(void)
{
while (s3c_hsmmc_readw(HM_NORINTSTS) & (0x1 << 15)) {
s3c_hsmmc_writew(s3c_hsmmc_readw(HM_NORINTSTS), HM_NORINTSTS);
s3c_hsmmc_writew(s3c_hsmmc_readw(HM_ERRINTSTS), HM_ERRINTSTS);
}
}
static void InterruptEnable(ushort NormalIntEn, ushort ErrorIntEn)
{
ClearErrInterruptStatus();
s3c_hsmmc_writew(NormalIntEn, HM_NORINTSTSEN);
s3c_hsmmc_writew(ErrorIntEn, HM_ERRINTSTSEN);
}
static void hsmmc_clock_onoff (int on)
{
u16 reg16;
if (on == 0) {
reg16 = s3c_hsmmc_readw(HM_CLKCON) & ~(0x1<<2);
s3c_hsmmc_writew(reg16, HM_CLKCON);
} else {
reg16 = s3c_hsmmc_readw(HM_CLKCON);
s3c_hsmmc_writew(reg16 | (0x1<<2), HM_CLKCON);
while (1) {
reg16 = s3c_hsmmc_readw(HM_CLKCON);
if (reg16 & (0x1<<3)) /* SD_CLKSRC is Stable */
break;
}
}
}
static void set_clock (u32 clksrc, u32 div)
{
u16 reg16;
u32 i;
s3c_hsmmc_writel(0xC0004100 | (clksrc << 4), HM_CONTROL2); // rx feedback control
s3c_hsmmc_writel(0x00008080, HM_CONTROL3); // Low clock: 00008080
s3c_hsmmc_writel(0x3 << 16, HM_CONTROL4);
s3c_hsmmc_writew(s3c_hsmmc_readw(HM_CLKCON) & ~(0xff << 8), HM_CLKCON);
/* SDCLK Value Setting + Internal Clock Enable */
s3c_hsmmc_writew(((div<<8) | 0x1), HM_CLKCON);
/* CheckInternalClockStable */
for (i = 0; i < 0x10000; i++) {
reg16 = s3c_hsmmc_readw(HM_CLKCON);
if (reg16 & 0x2)
break;
}
if (i == 0x10000)
puts("internal clock stabilization failed\n");
hsmmc_clock_onoff(1);
}
static void set_cmd_register (ushort cmd, u32 data, u32 flags)
{
ushort val = (cmd << 8);
if (cmd == 12)
val |= (3 << 6);
if (flags & MMC_RSP_136) /* Long RSP */
val |= 0x01;
else if (flags & MMC_RSP_BUSY) /* R1B */
val |= 0x03;
else if (flags & MMC_RSP_PRESENT) /* Normal RSP */
val |= 0x02;
if (flags & MMC_RSP_OPCODE)
val |= (1<<4);
if (flags & MMC_RSP_CRC)
val |= (1<<3);
if (data)
val |= (1<<5);
// puts("cmdreg = 0x");
// print32(val);
// puts("\n");
s3c_hsmmc_writew(val, HM_CMDREG);
}
static int issue_command (ushort cmd, u32 arg, u32 data, u32 flags)
{
int i;
/* puts("### issue_command: ");
printdec(cmd);
puts(" 0x");
print32(arg);
puts(" ");
printdec(data);
puts(" 0x");
print32(flags);
puts("\n");
*/
/* Check CommandInhibit_CMD */
for (i = 0; i < 0x1000000; i++) {
if (!(s3c_hsmmc_readl(HM_PRNSTS) & 0x1))
break;
}
if (i == 0x1000000) {
puts("@@@@@@1 rHM_PRNSTS: ");
printdec(s3c_hsmmc_readl(HM_PRNSTS));
puts("\n");
}
/* Check CommandInhibit_DAT */
if (flags & MMC_RSP_BUSY) {
for (i = 0; i < 0x1000000; i++) {
if (!(s3c_hsmmc_readl(HM_PRNSTS) & 0x2))
break;
}
if (i == 0x1000000) {
puts("@@@@@@2 rHM_PRNSTS: ");
print32(s3c_hsmmc_readl(HM_PRNSTS));
puts("\n");
}
}
s3c_hsmmc_writel(arg, HM_ARGUMENT);
set_cmd_register(cmd, data, flags);
if (wait_for_cmd_done())
return 0;
ClearCommandCompleteStatus();
if (!(s3c_hsmmc_readw(HM_NORINTSTS) & 0x8000))
return 1;
puts("Command = ");
printdec((s3c_hsmmc_readw(HM_CMDREG) >> 8));
puts(", Error Stat = 0x");
print32(s3c_hsmmc_readw(HM_ERRINTSTS));
return 0;
}
static int check_card_status(void)
{
if (!issue_command(MMC_SEND_STATUS, rca<<16, 0, MMC_RSP_R1))
return 0;
if (((s3c_hsmmc_readl(HM_RSPREG0) >> 9) & 0xf) == 4) {
// puts("Card is transfer status\n");
return 1;
}
return 1;
}
static void set_hostctl_speed (u8 mode)
{
u8 reg8;
reg8 = s3c_hsmmc_readb(HM_HOSTCTL) & ~(0x1<<2);
s3c_hsmmc_writeb(reg8 | (mode<<2), HM_HOSTCTL);
}
/* return 0: OK
* return -1: error
*/
static int set_bus_width (u32 width)
{
u8 reg = s3c_hsmmc_readb(HM_HOSTCTL);
u8 bitmode = 0;
card_irq_enable(0); // Disable sd card interrupt
if (!issue_command(MMC_APP_CMD, rca<<16, 0, MMC_RSP_R1))
return -1;
else {
if (width == 1) { // 1-bits
bitmode = 0;
if (!issue_command(MMC_SWITCH, 0, 0, MMC_RSP_R1B))
return -1;
} else { // 4-bits
bitmode = 1;
if (!issue_command(MMC_SWITCH, 2, 0, MMC_RSP_R1B))
return -1;
}
}
if (bitmode == 2)
reg |= 1 << 5;
else
reg |= bitmode << 1;
s3c_hsmmc_writeb(reg, HM_HOSTCTL);
card_irq_enable(1);
// puts(" transfer rHM_HOSTCTL(0x28) = 0x");
// print32(s3c_hsmmc_readb(HM_HOSTCTL));
return 0;
}
static void clock_config (u32 Divisior)
{
if (100000000 / (Divisior * 2) > 25000000) // Higher than 25MHz, it is necessary to enable high speed mode of the host controller.
set_hostctl_speed(HIGH);
else
set_hostctl_speed(NORMAL);
hsmmc_clock_onoff(0); // when change the sd clock frequency, need to stop sd clock.
set_clock(SD_EPLL, Divisior);
}
static void check_dma_int (void)
{
u32 i;
for (i = 0; i < 0x1000000; i++) {
if (s3c_hsmmc_readw(HM_NORINTSTS) & 0x0002) {
HS_DMA_END = 1;
s3c_hsmmc_writew(s3c_hsmmc_readw(HM_NORINTSTS) | 0x0002, HM_NORINTSTS);
break;
}
if (s3c_hsmmc_readw(HM_NORINTSTS) & 0x8000) {
puts("error found: ");
print32(s3c_hsmmc_readw(HM_ERRINTSTS));
break;
}
}
}
static void print_sd_cid(const struct sd_cid *cid)
{
puts(" Card Type: ");
switch (card_type) {
case CARDTYPE_NONE:
puts("(None) / ");
break;
case CARDTYPE_MMC:
puts("MMC / ");
break;
case CARDTYPE_SD:
puts("SD / ");
break;
case CARDTYPE_SD20:
puts("SD 2.0 / ");
break;
case CARDTYPE_SDHC:
puts("SD 2.0 SDHC / ");
break;
}
puts("Mfr: 0x");
print8(cid->mid);
puts(", OEM \"");
this_board->putc(cid->oid_0);
this_board->putc(cid->oid_1);
puts("\" / ");
this_board->putc(cid->pnm_0);
this_board->putc(cid->pnm_1);
this_board->putc(cid->pnm_2);
this_board->putc(cid->pnm_3);
this_board->putc(cid->pnm_4);
puts("\", rev ");
printdec(cid->prv >> 4);
puts(".");
printdec(cid->prv & 15);
puts(" / s/n: ");
print32(cid->psn_0 << 24 | cid->psn_1 << 16 | cid->psn_2 << 8 |
cid->psn_3);
puts(" / date: ");
printdec(cid->mdt_1 & 15);
puts("/");
printdec(2000 + ((cid->mdt_0 & 15) << 4)+((cid->mdt_1 & 0xf0) >> 4));
puts("\n");
}
unsigned int s3c6410_mmc_init (int verbose)
{
u32 reg;
u32 width;
int resp;
int hcs;
int retries = 50;
u8 response[16];
unsigned int r1[4];
struct sd_cid *sd_cid = (struct sd_cid *)response;
struct mmc_csd *csd = (struct mmc_csd *)response;
u8 *p8 = (u8 *)&r1[0];
unsigned int sd_sectors = 0;
/* we need to shift result by 8 bits spread over 4 x 32-bit regs */
u8 mangle[] = { 7, 0, 1, 2, 11, 4, 5, 6, 15, 8, 9, 10, 0, 12, 13, 14 };
int n;
hsmmc_set_gpio();
hsmmc_reset();
width = 4;
HCLK = 33000000; /* FIXME */
hsmmc_clock_onoff(0);
reg = readl(SCLK_GATE);
writel(reg | (1<<27), SCLK_GATE);
set_clock(SD_EPLL, 0x80);
s3c_hsmmc_writeb(0xe, HM_TIMEOUTCON);
set_hostctl_speed(NORMAL);
InterruptEnable(0xff, 0xff);
// dbg("HM_NORINTSTS = %x\n", s3c_hsmmc_readw(HM_NORINTSTS));
/* MMC_GO_IDLE_STATE */
issue_command(MMC_GO_IDLE_STATE, 0x00, 0, 0);
udelay(100000);
udelay(100000);
udelay(100000);
udelay(100000);
/* SDHC card? */
resp = issue_command(SD_SEND_IF_COND, 0x000001aa,
0, MMC_CMD_BCR | MMC_RSP_R7);
if (resp && ((s3c_hsmmc_readl(HM_RSPREG0) & 0xff) == 0xaa)) {
puts("SD 2.0\n");
card_type = CARDTYPE_SD20; /* 2.0 SD, may not be SDHC */
hcs = 0x40000000;
}
/* Well, either way let's say hello in SD card protocol */
while (retries--) {
udelay(100000);
udelay(100000);
udelay(100000);
resp = issue_command(MMC_APP_CMD, 0x00000000, 0,
MMC_RSP_R1);
if (!resp)
continue;
resp = issue_command(SD_APP_OP_COND, hcs | 0x00300000, 0,
MMC_RSP_R3);
if (!resp)
continue;
if ((s3c_hsmmc_readl(HM_RSPREG0) >> 24) & (1 << 6)) { /* asserts block addressing */
retries = -2;
card_type = CARDTYPE_SDHC;
}
if ((s3c_hsmmc_readl(HM_RSPREG0) >> 24) & (1 << 7)) { /* not busy */
retries = -2;
if (card_type == CARDTYPE_NONE)
card_type = CARDTYPE_SD;
break;
}
}
if (retries == -1) {
puts("no response\n");
return -2;
}
if (!issue_command(MMC_ALL_SEND_CID, 0, 0, MMC_RSP_R2)) {
puts("CID broken\n");
return -3;
}
r1[0] = s3c_hsmmc_readl(HM_RSPREG3);
r1[1] = s3c_hsmmc_readl(HM_RSPREG2);
r1[2] = s3c_hsmmc_readl(HM_RSPREG1);
r1[3] = s3c_hsmmc_readl(HM_RSPREG0);
for (n = 0; n < 16; n++)
response[n] = p8[mangle[n]];
switch (card_type) {
case CARDTYPE_SD:
case CARDTYPE_SD20:
case CARDTYPE_SDHC:
if (verbose)
print_sd_cid(sd_cid);
resp = issue_command(SD_SEND_RELATIVE_ADDR, MMC_DEFAULT_RCA,
0, MMC_RSP_R6);
rca = s3c_hsmmc_readl(HM_RSPREG0) >> 16;
break;
default:
return 1;
}
/* grab the CSD */
resp = issue_command(MMC_SEND_CSD, rca << 16, 0, MMC_RSP_R2);
if (resp) {
r1[0] = s3c_hsmmc_readl(HM_RSPREG3);
r1[1] = s3c_hsmmc_readl(HM_RSPREG2);
r1[2] = s3c_hsmmc_readl(HM_RSPREG1);
r1[3] = s3c_hsmmc_readl(HM_RSPREG0);
for (n = 0; n < 16; n++)
response[n] = p8[mangle[n]];
switch (card_type) {
case CARDTYPE_SDHC:
puts(" SDHC size: ");
sd_sectors = (UNSTUFF_BITS(((u32 *)&response[0]), 48, 22)
+ 1) << 10;
break;
default:
puts(" MMC/SD size: ");
sd_sectors = ((((unsigned long)1 << csd->c_size_mult1) *
(unsigned long)(csd->c_size)) >> 9);
}
printdec(sd_sectors / 2048);
puts(" MiB\n");
} else
puts("CSD grab broken\n");
resp = issue_command(MMC_SELECT_CARD, rca<<16, 0, MMC_RSP_R1);
if (!resp)
return 1;
/* Operating Clock setting */
clock_config(2); // Divisor 1 = Base clk /2 ,Divisor 2 = Base clk /4, Divisor 4 = Base clk /8 ...
while (set_bus_width(width));
while (!check_card_status());
/* MMC_SET_BLOCKLEN */
while (!issue_command(MMC_SET_BLOCKLEN, 512, 0, MMC_RSP_R1));
s3c_hsmmc_writew(0xffff, HM_NORINTSTS);
return sd_sectors;
}
unsigned long s3c6410_mmc_bread(int dev_num, unsigned long start_blk, unsigned long blknum,
void *dst)
{
u32 blksize; //j, , Addr_temp = start_blk;
u32 dma = 0, cmd, multi; //, TotalReadByte, read_blk_cnt = 0;
rd_cnt_HSMMC = 0;
HS_DMA_END = 0;
BlockNum_HSMMC = 0;
rd_cnt_HSMMC = 0;
ReadBlockCnt_INT = 0;
// printf("\nHS-MMC block Read test: %d, 0x%x 0x%x\n", test, start_blk, blknum);
BlockNum_HSMMC = blknum;
blksize = Card_OneBlockSize_ver1;
#if 0
Rx_buffer_HSMMC = (u32 *) SDI_Rx_buffer_HSMMC;
for (i = 0; i < (blksize * BlockNum_HSMMC) / 4; i++)
*(Rx_buffer_HSMMC + i) = 0x0;
#endif
while (!check_card_status());
s3c_hsmmc_writew(s3c_hsmmc_readw(HM_NORINTSTSEN) & ~(DMA_STS_INT_EN | BLOCKGAP_EVENT_STS_INT_EN), HM_NORINTSTSEN);
s3c_hsmmc_writew((HM_NORINTSIGEN & ~(0xffff)) | TRANSFERCOMPLETE_SIG_INT_EN, HM_NORINTSIGEN);
SetSystemAddressReg((unsigned long)dst); // AHB System Address For Write
dma = 1;
set_blksize_register(7, 512); // Maximum DMA Buffer Size, Block Size
set_blkcnt_register(BlockNum_HSMMC); // Block Numbers to Write
if (movi_hc)
set_arg_register(start_blk); // Card Start Block Address to Write
else
set_arg_register(start_blk * 512); // Card Start Block Address to Write
cmd = (blknum > 1) ? 18 : 17;
multi = (blknum > 1);
set_transfer_mode_register(multi, 1, multi, 1, dma);
set_cmd_register(cmd, 1, MMC_RSP_R1);
if (wait_for_cmd_done()) {
puts("Command NOT Complete\n");
return -1;
} else
ClearCommandCompleteStatus();
check_dma_int();
while (!HS_DMA_END);
// puts("\nDMA Read End\n");
HS_DMA_END = 0;
BlockNum_HSMMC = 0;
rd_cnt_HSMMC = 0;
ReadBlockCnt_INT = 0;
return 0;
}

View File

@ -0,0 +1,40 @@
#ifndef __HS_MMC_H__
#define __HS_MMC_H__
/////////////////////////////////////////////////////////////////////////////////////////////////
//#define SDHC_MONITOR (*(volatile unsigned *)0x4800004c)
//#define SDHC_SLOT_INT_STAT (*(volatile unsigned *)0x480000fc)
/////////////////////////////////////////////////////////////////////////////////////////////////
#define SD_HCLK 1
#define SD_EPLL 2
#define SD_EXTCLK 3
#define NORMAL 0
#define HIGH 1
//Normal Interrupt Signal Enable
#define READWAIT_SIG_INT_EN (1<<10)
#define CARD_SIG_INT_EN (1<<8)
#define CARD_REMOVAL_SIG_INT_EN (1<<7)
#define CARD_INSERT_SIG_INT_EN (1<<6)
#define BUFFER_READREADY_SIG_INT_EN (1<<5)
#define BUFFER_WRITEREADY_SIG_INT_EN (1<<4)
#define DMA_SIG_INT_EN (1<<3)
#define BLOCKGAP_EVENT_SIG_INT_EN (1<<2)
#define TRANSFERCOMPLETE_SIG_INT_EN (1<<1)
#define COMMANDCOMPLETE_SIG_INT_EN (1<<0)
//Normal Interrupt Status Enable
#define READWAIT_STS_INT_EN (1<<10)
#define CARD_STS_INT_EN (1<<8)
#define CARD_REMOVAL_STS_INT_EN (1<<7)
#define CARD_INSERT_STS_INT_EN (1<<6)
#define BUFFER_READREADY_STS_INT_EN (1<<5)
#define BUFFER_WRITEREADY_STS_INT_EN (1<<4)
#define DMA_STS_INT_EN (1<<3)
#define BLOCKGAP_EVENT_STS_INT_EN (1<<2)
#define TRANSFERCOMPLETE_STS_INT_EN (1<<1)
#define COMMANDCOMPLETE_STS_INT_EN (1<<0)
#endif /*__HS_MMC_H__*/

View File

@ -29,32 +29,41 @@ SECTIONS
{ {
. = 0x00000000; . = 0x00000000;
__system_ram_start = 0x50000000;
__steppingstone = 0x0c000000;
/* this text section is magically pulled from the SD Card /* this text section is magically pulled from the SD Card
* and stored by the iRom at 0x0c000000, then it is jumped into * and stored by the iRom at 0x0c000000, then it is jumped into
* by the iRom. So we arrange our early parts needed at 0 in the * by the iRom. So we arrange our early parts needed at 0 in the
* output file, but set to run at 0x0c000000+ * output file, but set to run at 0x0c000000+
*/ */
.text 0x0c000000 : AT ( 0 ) .text
__steppingstone :
AT (0)
{ {
src/cpu/s3c6410/start.o (.text .rodata* .data) src/cpu/s3c6410/start.o (.text .rodata* .data)
src/cpu/s3c6410/start_qi.o (.text .rodata* .data) src/cpu/s3c6410/start_qi.o (.text .rodata* .data)
src/cpu/s3c6410/serial-s3c64xx.o (.text .rodata* .data) src/cpu/s3c6410/serial-s3c64xx.o (.text .rodata* .data)
src/cpu/s3c6410/tla01.o (.text .rodata* .data) src/cpu/s3c6410/tla01.o (.text .rodata* .data)
src/ctype.o (.text .rodata* .data) src/cpu/s3c6410/hs_mmc.o (.text .rodata* .data)
src/phase2.o (.text .rodata* .data)
src/utils.o (.text .rodata* .data) src/utils.o (.text .rodata* .data)
src/ctype.o (.text .rodata* .data)
} }
/* . = ALIGN(4); . = ALIGN(4);
.everything_else ADDR (.text) + SIZEOF (.text) + 0x53000000 : .everything_else
AT ( ADDR (.text) + SIZEOF (.text) ) { *(.text .rodata* .data) } __system_ram_start + 0x3000000 + SIZEOF(.text) :
AT (SIZEOF(.text))
{
*(.text .rodata* .data)
}
*/
. = 0x53800000 ; __bss_start = __system_ram_start + 0x03800000;
/* . = 0x0c001900 ; */ .bss_6410
__bss_start = .; __bss_start (NOLOAD) :
.bss_6410 (NOLOAD) : AT (SIZEOF(.text) + SIZEOF(.everything_else))
{ {
* (.bss) * (.bss)
} }

View File

@ -27,6 +27,9 @@
#include <qi.h> #include <qi.h>
#include <neo_tla01.h> #include <neo_tla01.h>
#define stringify2(s) stringify1(s)
#define stringify1(s) #s
extern void bootloader_second_phase(void); extern void bootloader_second_phase(void);
const struct board_api *boards[] = { const struct board_api *boards[] = {
@ -43,6 +46,7 @@ void start_qi(void)
{ {
int flag = 0; int flag = 0;
int board = 0; int board = 0;
unsigned int sd_sectors = 0;
/* /*
* well, we can be running on this CPU two different ways. * well, we can be running on this CPU two different ways.
@ -59,7 +63,38 @@ void start_qi(void)
* under control of JTAG. * under control of JTAG.
*/ */
if (!is_jtag)
/* ask all the boards we support in turn if they recognize this
* hardware we are running on, accept the first positive answer
*/
this_board = boards[board];
while (!flag && this_board)
/* check if it is the right board... */
if (this_board->is_this_board())
flag = 1;
else
this_board = boards[board++];
/* okay, do the critical port and serial init for our board */
this_board->port_init();
/* stick some hello messages on debug console */
puts("\n\n\nQi Bootloader "stringify2(QI_CPU)" "
stringify2(BUILD_HOST)" "
stringify2(BUILD_VERSION)" "
"\n");
puts(stringify2(BUILD_DATE) " Copyright (C) 2008 Openmoko, Inc.\n");
puts("\n Detected: ");
puts(this_board->name);
puts(", ");
puts((this_board->get_board_variant)()->name);
if (!is_jtag) {
/* /*
* We got the first 4KBytes of the bootloader pulled into the * We got the first 4KBytes of the bootloader pulled into the
* steppingstone SRAM for free. Now we pull the whole bootloader * steppingstone SRAM for free. Now we pull the whole bootloader
@ -67,40 +102,25 @@ void start_qi(void)
* *
* This code and the .S files are arranged by the linker script * This code and the .S files are arranged by the linker script
* to expect to run from 0x0. But the linker script has told * to expect to run from 0x0. But the linker script has told
* everything else to expect to run from 0x33000000+. That's * everything else to expect to run from 0x53000000+. That's
* why we are going to be able to copy this code and not have it * why we are going to be able to copy this code and not have it
* crash when we run it from there. * crash when we run it from there.
*/ */
/* We randomly pull 32KBytes of bootloader */ /* We randomly pull 32KBytes of bootloader */
/* FIXME this ain't right for s3c6410 */
#if 0
if (nand_read_ll((u8 *)TEXT_BASE, 0, 32 * 1024 / 512) < 0)
goto unhappy;
#endif
/* ask all the boards we support in turn if they recognize this extern unsigned int s3c6410_mmc_init(int verbose);
* hardware we are running on, accept the first positive answer unsigned long s3c6410_mmc_bread(int dev_num,
*/ unsigned long start_blk, unsigned long blknum,
void *dst);
this_board = boards[board]; sd_sectors = s3c6410_mmc_init(1);
while (!flag && this_board) { s3c6410_mmc_bread(0, sd_sectors - 1026 - 16 - (256 * 2),
256 * 2, (u8 *)0x53000000);
/* check if it is the right board... */
if (this_board->is_this_board()) {
flag = 1;
continue;
} }
this_board = boards[board++];
}
/* /*
* jump to bootloader_second_phase() running from DRAM copy * jump to bootloader_second_phase() running from DRAM copy
*/ */
bootloader_second_phase(); bootloader_second_phase();
while(1)
;
} }

View File

@ -137,6 +137,7 @@ void port_init_tla01(void)
i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_DOWN1OUT, i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_DOWN1OUT,
0x2b); 0x2b);
#endif #endif
} }
/** /**
@ -166,13 +167,28 @@ static void putc_tla01(char c)
serial_putc_s3c64xx(GTA03_DEBUG_UART, c); serial_putc_s3c64xx(GTA03_DEBUG_UART, c);
} }
int sd_card_init_tla01(void)
{
extern int s3c6410_mmc_init(int verbose);
return s3c6410_mmc_init(1);
}
int sd_card_block_read_tla01(unsigned char * buf, unsigned long start512,
int blocks512)
{
unsigned long s3c6410_mmc_bread(int dev_num, unsigned long blknr, unsigned long blkcnt,
void *dst);
return s3c6410_mmc_bread(0, start512, blocks512, buf);
}
/* /*
* our API for bootloader on this machine * our API for bootloader on this machine
*/ */
const struct board_api board_api_tla01 = { const struct board_api board_api_tla01 = {
.name = "TLA01", .name = "TLA01",
.linux_machine_id = 1866, .linux_machine_id = 1304 /*1866*/,
.linux_mem_start = 0x50000000, .linux_mem_start = 0x50000000,
.linux_mem_size = (128 * 1024 * 1024), .linux_mem_size = (128 * 1024 * 1024),
.linux_tag_placement = 0x50000000 + 0x100, .linux_tag_placement = 0x50000000 + 0x100,
@ -182,10 +198,11 @@ const struct board_api board_api_tla01 = {
.putc = putc_tla01, .putc = putc_tla01,
.kernel_source = { .kernel_source = {
[0] = { [0] = {
.name = "SD Card", .name = "SD Card rootfs",
.block_read = NULL, /* FIXME It's s3c6400 sd card*/ .block_read = sd_card_block_read_tla01,
.offset_blocks512_if_no_partition = 0x80000 / 512, .filesystem = FS_EXT2,
.filesystem = FS_RAW, .partition_index = 2,
.filepath = "boot/uImage.bin",
.commandline = "rootfstype=ext3 " \ .commandline = "rootfstype=ext3 " \
"root=/dev/mmcblk0p1 " \ "root=/dev/mmcblk0p1 " \
"console=ttySAC2,115200 " \ "console=ttySAC2,115200 " \
@ -193,5 +210,17 @@ const struct board_api board_api_tla01 = {
"init=/sbin/init "\ "init=/sbin/init "\
"ro" "ro"
}, },
}, [1] = {
.name = "SD Card backup rootfs",
.block_read = sd_card_block_read_tla01,
.filesystem = FS_EXT2,
.partition_index = 3,
.filepath = "boot/uImage.bin",
.commandline = "rootfstype=ext3 " \
"root=/dev/mmcblk0p1 " \
"console=ttySAC2,115200 " \
"loglevel=4 " \
"init=/sbin/init "\
"ro"
}, },
}; };

View File

@ -30,10 +30,6 @@
#include <setup.h> #include <setup.h>
#include <ext2.h> #include <ext2.h>
#define stringify2(s) stringify1(s)
#define stringify1(s) #s
unsigned long partition_offset_blocks = 0; unsigned long partition_offset_blocks = 0;
unsigned long partition_length_blocks = 0; unsigned long partition_length_blocks = 0;
@ -49,28 +45,8 @@ void bootloader_second_phase(void)
{ {
void (*the_kernel)(int zero, int arch, uint params); void (*the_kernel)(int zero, int arch, uint params);
int kernel = 0; int kernel = 0;
const struct board_variant * board_variant; const struct board_variant * board_variant =
(this_board->get_board_variant)();
/* okay, do the critical port and serial init for our board */
this_board->port_init();
/* stick some hello messages on debug console */
puts("\n\n\nQi Bootloader "stringify2(QI_CPU)" "
stringify2(BUILD_HOST)" "
stringify2(BUILD_VERSION)" "
stringify2(BUILD_DATE)"\n");
puts("Copyright (C) 2008 Openmoko, Inc.\n");
puts("This is free software; see the source for copying conditions.\n"
"There is NO warranty; not even for MERCHANTABILITY or "
"FITNESS FOR A PARTICULAR PURPOSE.\n\n Detected: ");
puts(this_board->name);
puts(", ");
board_variant = (this_board->get_board_variant)();
puts(board_variant->name);
/* we try the possible kernels for this board in order */ /* we try the possible kernels for this board in order */
@ -79,7 +55,7 @@ void bootloader_second_phase(void)
while (this_kernel->name) { while (this_kernel->name) {
const char *p; const char *p;
struct tag *params = (struct tag *)this_board->linux_tag_placement; struct tag *params = (struct tag *)this_board->linux_tag_placement;
void * kernel_dram = (void *)(TEXT_BASE - (8 * 1024 * 1024)); void * kernel_dram = (void *)this_board->linux_mem_start + 0x8000;
unsigned long crc; unsigned long crc;
image_header_t *hdr; image_header_t *hdr;
u32 kernel_size; u32 kernel_size;
@ -150,7 +126,6 @@ void bootloader_second_phase(void)
switch (this_kernel->filesystem) { switch (this_kernel->filesystem) {
case FS_EXT2: case FS_EXT2:
#if 0
if (!ext2fs_mount()) { if (!ext2fs_mount()) {
puts("Unable to mount ext2 filesystem\n"); puts("Unable to mount ext2 filesystem\n");
this_kernel = &this_board-> this_kernel = &this_board->
@ -168,7 +143,7 @@ void bootloader_second_phase(void)
} }
ext2fs_read(kernel_dram, 4096); ext2fs_read(kernel_dram, 4096);
break; break;
#endif
case FS_FAT: case FS_FAT:
/* FIXME */ /* FIXME */
case FS_RAW: case FS_RAW:
@ -206,11 +181,10 @@ void bootloader_second_phase(void)
switch (this_kernel->filesystem) { switch (this_kernel->filesystem) {
case FS_EXT2: case FS_EXT2:
#if 0
/* This read API always restarts from beginning */ /* This read API always restarts from beginning */
ext2fs_read(kernel_dram, kernel_size); ext2fs_read(kernel_dram, kernel_size);
break; break;
#endif
case FS_FAT: case FS_FAT:
/* FIXME */ /* FIXME */
case FS_RAW: case FS_RAW: