mirror of
git://projects.qi-hardware.com/xburst-tools.git
synced 2024-12-23 08:32:04 +02:00
031b54c699
Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc>
239 lines
6.4 KiB
C
239 lines
6.4 KiB
C
//
|
|
// Authors: Xiangfu Liu <xiangfu@sharism.cc>
|
|
//
|
|
// This program is free software; you can redistribute it and/or
|
|
// modify it under the terms of the GNU General Public License
|
|
// as published by the Free Software Foundation; either version
|
|
// 3 of the License, or (at your option) any later version.
|
|
//
|
|
|
|
#include "jz4740.h"
|
|
|
|
void gpio_init_4740()
|
|
{
|
|
__gpio_as_nand();
|
|
__gpio_as_sdram_32bit();
|
|
/* enable the TP4, TP5 as UART0 */
|
|
REG_GPIO_PXSELS(2) = 0x80000000;
|
|
__gpio_as_uart0();
|
|
__gpio_as_lcd_18bit();
|
|
__gpio_as_msc();
|
|
|
|
#define GPIO_LCD_CS (2 * 32 + 21)
|
|
#define GPIO_KEYOUT_BASE (2 * 32 + 10)
|
|
#define GPIO_KEYIN_BASE (3 * 32 + 18)
|
|
|
|
unsigned int i;
|
|
for (i = 0; i < 7; i++){
|
|
__gpio_as_input(GPIO_KEYIN_BASE + i);
|
|
__gpio_enable_pull(GPIO_KEYIN_BASE + i);
|
|
}
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
__gpio_as_output(GPIO_KEYOUT_BASE + i);
|
|
__gpio_clear_pin(GPIO_KEYOUT_BASE + i);
|
|
}
|
|
|
|
__gpio_as_output(GPIO_LCD_CS);
|
|
__gpio_clear_pin(GPIO_LCD_CS);
|
|
}
|
|
|
|
void pll_init_4740()
|
|
{
|
|
register unsigned int cfcr, plcr1;
|
|
int n2FR[33] = {
|
|
0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
|
|
7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
|
|
9
|
|
};
|
|
/* int div[5] = {1, 4, 4, 4, 4}; */ /* divisors of I:S:P:L:M */
|
|
int nf, pllout2;
|
|
|
|
cfcr = CPM_CPCCR_CLKOEN |
|
|
(n2FR[1] << CPM_CPCCR_CDIV_BIT) |
|
|
(n2FR[ARG_PHM_DIV] << CPM_CPCCR_HDIV_BIT) |
|
|
(n2FR[ARG_PHM_DIV] << CPM_CPCCR_PDIV_BIT) |
|
|
(n2FR[ARG_PHM_DIV] << CPM_CPCCR_MDIV_BIT) |
|
|
(n2FR[ARG_PHM_DIV] << CPM_CPCCR_LDIV_BIT);
|
|
|
|
pllout2 = (cfcr & CPM_CPCCR_PCS) ? ARG_CPU_SPEED : (ARG_CPU_SPEED / 2);
|
|
|
|
/* Init UHC clock */
|
|
REG_CPM_UHCCDR = pllout2 / 48000000 - 1;
|
|
|
|
nf = ARG_CPU_SPEED * 2 / ARG_EXTAL;
|
|
plcr1 = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */
|
|
(0 << CPM_CPPCR_PLLN_BIT) | /* RD=0, NR=2 */
|
|
(0 << CPM_CPPCR_PLLOD_BIT) | /* OD=0, NO=1 */
|
|
(0x20 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */
|
|
CPM_CPPCR_PLLEN; /* enable PLL */
|
|
|
|
/* init PLL */
|
|
REG_CPM_CPCCR = cfcr;
|
|
REG_CPM_CPPCR = plcr1;
|
|
}
|
|
|
|
static void serial_setbaud()
|
|
{
|
|
volatile u8* uart_lcr = (volatile u8*)(UART_BASE + OFF_LCR);
|
|
volatile u8* uart_dlhr = (volatile u8*)(UART_BASE + OFF_DLHR);
|
|
volatile u8* uart_dllr = (volatile u8*)(UART_BASE + OFF_DLLR);
|
|
u32 baud_div, tmp;
|
|
|
|
baud_div = ARG_EXTAL / 16 / ARG_UART_BAUD;
|
|
tmp = *uart_lcr;
|
|
tmp |= UART_LCR_DLAB;
|
|
*uart_lcr = tmp;
|
|
|
|
*uart_dlhr = (baud_div >> 8) & 0xff;
|
|
*uart_dllr = baud_div & 0xff;
|
|
|
|
tmp &= ~UART_LCR_DLAB;
|
|
*uart_lcr = tmp;
|
|
}
|
|
|
|
void serial_init_4740(int uart)
|
|
{
|
|
UART_BASE = UART0_BASE + uart * UART_OFF;
|
|
|
|
volatile u8* uart_fcr = (volatile u8*)(UART_BASE + OFF_FCR);
|
|
volatile u8* uart_lcr = (volatile u8*)(UART_BASE + OFF_LCR);
|
|
volatile u8* uart_ier = (volatile u8*)(UART_BASE + OFF_IER);
|
|
volatile u8* uart_sircr = (volatile u8*)(UART_BASE + OFF_SIRCR);
|
|
|
|
/* Disable port interrupts while changing hardware */
|
|
*uart_ier = 0;
|
|
|
|
/* Disable UART unit function */
|
|
*uart_fcr = ~UART_FCR_UUE;
|
|
|
|
/* Set both receiver and transmitter in UART mode (not SIR) */
|
|
*uart_sircr = ~(SIRCR_RSIRE | SIRCR_TSIRE);
|
|
|
|
/* Set databits, stopbits and parity. (8-bit data, 1 stopbit, no parity) */
|
|
*uart_lcr = UART_LCR_WLEN_8 | UART_LCR_STOP_1;
|
|
|
|
/* Set baud rate */
|
|
serial_setbaud();
|
|
|
|
/* Enable UART unit, enable and clear FIFO */
|
|
*uart_fcr = UART_FCR_UUE | UART_FCR_FE | UART_FCR_TFLS | UART_FCR_RFLS;
|
|
}
|
|
|
|
#define SDRAM_CASL 3 /* CAS latency: 2 or 3 */
|
|
// SDRAM Timings, unit: ns
|
|
#define SDRAM_TRAS 45 /* RAS# Active Time */
|
|
#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
|
|
#define SDRAM_TPC 20 /* RAS# Precharge Time */
|
|
#define SDRAM_TRWL 7 /* Write Latency Time */
|
|
#define SDRAM_TREF 15625 /* Refresh period: 4096 refresh cycles/64ms */
|
|
|
|
void sdram_init_4740()
|
|
{
|
|
register unsigned int dmcr0, dmcr, sdmode, tmp, cpu_clk, mem_clk, ns;
|
|
|
|
unsigned int cas_latency_sdmr[2] = {
|
|
EMC_SDMR_CAS_2,
|
|
EMC_SDMR_CAS_3,
|
|
};
|
|
unsigned int cas_latency_dmcr[2] = {
|
|
1 << EMC_DMCR_TCL_BIT, /* CAS latency is 2 */
|
|
2 << EMC_DMCR_TCL_BIT /* CAS latency is 3 */
|
|
};
|
|
|
|
int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
|
|
if (ARG_BUS_WIDTH_16 == 0xff)
|
|
return;
|
|
else
|
|
ARG_BUS_WIDTH_16 = 1;
|
|
|
|
cpu_clk = ARG_CPU_SPEED;
|
|
mem_clk = cpu_clk * div[__cpm_get_cdiv()] / div[__cpm_get_mdiv()];
|
|
|
|
REG_EMC_BCR = 0; /* Disable bus release */
|
|
REG_EMC_RTCSR = 0; /* Disable clock for counting */
|
|
|
|
/* Fault DMCR value for mode register setting*/
|
|
#define SDRAM_ROW0 11
|
|
#define SDRAM_COL0 8
|
|
#define SDRAM_BANK40 0
|
|
#define SDRAM_BW16 1
|
|
dmcr0 = ((SDRAM_ROW0-11)<<EMC_DMCR_RA_BIT) |
|
|
((SDRAM_COL0-8)<<EMC_DMCR_CA_BIT) |
|
|
(SDRAM_BANK40<<EMC_DMCR_BA_BIT) |
|
|
(SDRAM_BW16<<EMC_DMCR_BW_BIT) |
|
|
EMC_DMCR_EPIN |
|
|
cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
|
|
|
|
/* Basic DMCR value */
|
|
dmcr = ((ARG_ROW_ADDR-11)<<EMC_DMCR_RA_BIT) |
|
|
((ARG_COL_ADDR-8)<<EMC_DMCR_CA_BIT) |
|
|
(ARG_BANK_ADDR_2BIT<<EMC_DMCR_BA_BIT) |
|
|
(ARG_BUS_WIDTH_16<<EMC_DMCR_BW_BIT) |
|
|
EMC_DMCR_EPIN |
|
|
cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
|
|
|
|
/* SDRAM timimg */
|
|
ns = 1000000000 / mem_clk;
|
|
tmp = SDRAM_TRAS/ns;
|
|
if (tmp < 4) tmp = 4;
|
|
if (tmp > 11) tmp = 11;
|
|
dmcr |= ((tmp-4) << EMC_DMCR_TRAS_BIT);
|
|
tmp = SDRAM_RCD/ns;
|
|
if (tmp > 3) tmp = 3;
|
|
dmcr |= (tmp << EMC_DMCR_RCD_BIT);
|
|
tmp = SDRAM_TPC/ns;
|
|
if (tmp > 7) tmp = 7;
|
|
dmcr |= (tmp << EMC_DMCR_TPC_BIT);
|
|
tmp = SDRAM_TRWL/ns;
|
|
if (tmp > 3) tmp = 3;
|
|
dmcr |= (tmp << EMC_DMCR_TRWL_BIT);
|
|
tmp = (SDRAM_TRAS + SDRAM_TPC)/ns;
|
|
if (tmp > 14) tmp = 14;
|
|
dmcr |= (((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT);
|
|
|
|
/* SDRAM mode value */
|
|
sdmode = EMC_SDMR_BT_SEQ |
|
|
EMC_SDMR_OM_NORMAL |
|
|
EMC_SDMR_BL_4 |
|
|
cas_latency_sdmr[((SDRAM_CASL == 3) ? 1 : 0)];
|
|
|
|
/* Stage 1. Precharge all banks by writing SDMR with DMCR.MRSET=0 */
|
|
REG_EMC_DMCR = dmcr;
|
|
REG8(EMC_SDMR0|sdmode) = 0;
|
|
|
|
/* Wait for precharge, > 200us */
|
|
tmp = (cpu_clk / 1000000) * 1000;
|
|
while (tmp--);
|
|
|
|
/* Stage 2. Enable auto-refresh */
|
|
REG_EMC_DMCR = dmcr | EMC_DMCR_RFSH;
|
|
|
|
tmp = SDRAM_TREF/ns;
|
|
tmp = tmp/64 + 1;
|
|
if (tmp > 0xff) tmp = 0xff;
|
|
REG_EMC_RTCOR = tmp;
|
|
REG_EMC_RTCNT = 0;
|
|
REG_EMC_RTCSR = EMC_RTCSR_CKS_64; /* Divisor is 64, CKO/64 */
|
|
|
|
/* Wait for number of auto-refresh cycles */
|
|
tmp = (cpu_clk / 1000000) * 1000;
|
|
while (tmp--);
|
|
|
|
/* Stage 3. Mode Register Set */
|
|
REG_EMC_DMCR = dmcr0 | EMC_DMCR_RFSH | EMC_DMCR_MRSET;
|
|
REG8(EMC_SDMR0|sdmode) = 0;
|
|
|
|
/* Set back to basic DMCR value */
|
|
REG_EMC_DMCR = dmcr | EMC_DMCR_RFSH | EMC_DMCR_MRSET;
|
|
|
|
/* everything is ok now */
|
|
}
|
|
|
|
void nand_init_4740()
|
|
{
|
|
REG_EMC_SMCR1 = 0x094c4400;
|
|
REG_EMC_NFCSR |= EMC_NFCSR_NFE1 | EMC_NFCSR_NFCE1; //__nand_enable()
|
|
}
|