Werner Almesberger
81c2a48461
modules/memcard8-amp-10100660.fpd: Amphenol 10100660 footprint (draft)
2013-09-15 11:26:47 -03:00
Werner Almesberger
2c26373d24
add EastRising OLED FPC-30 connector (symbol and footprint)
2013-09-15 10:13:16 -03:00
Werner Almesberger
e8e6813724
modules/qfn.fpd: add QFN48-Freescale for KL25 chips (draft)
2013-09-14 23:16:22 -03:00
Werner Almesberger
b3d76021a0
modules/inductor-2p.fpd: footprints for 2-SMD inductors (3mmx3mm for now)
2012-12-22 22:22:41 -03:00
Werner Almesberger
6b6eaf674c
modules/8_10-socket-ra-push-pull.fpd: Amphenol 114-00841-68 push-pull uSD
2012-12-22 22:01:06 -03:00
Werner Almesberger
5c3043affc
modules/lga.fpd: LGA-16-3x3 package, for LIS3DH
2012-12-22 18:50:44 -03:00
Werner Almesberger
72b0c31f3e
Merge branch 'master' of projects.qi-hardware.com:kicad-libs
2012-12-21 20:35:09 -03:00
Werner Almesberger
2e07473015
include common/Makefile after "all", so that it won't override the default
2012-12-21 20:27:39 -03:00
Werner Almesberger
21513c1c61
title page: always generate title.ps when generating the catalog
...
In order to keep "phony" title.ps from triggering a catalog rebuild when
nothing has changed, we also have to remove it as a dependency from
"catalog", and just invoke "make" explicitly.
2012-12-21 20:25:35 -03:00
Werner Almesberger
694cebf972
modules/dfn.fpd: DFN-8 (aka TI's WSON-8) package, for TPS6216x
2012-12-21 20:22:17 -03:00
Xiangfu
b3fcc764f5
bga: use the nominal size
2012-12-21 22:32:53 +08:00
Werner Almesberger
e324adc35a
add title pages to the catalogs, with useful information like the creation date
2012-12-21 00:51:20 -03:00
Werner Almesberger
cce90811d9
modules/: "make brd" opens pcbnew for footprint examination
...
The profile is automatically generated from the list of modules.
2012-12-20 22:42:55 -03:00
Werner Almesberger
94f902495c
modules/: add QFN32-HVQFN (e.g., for NXP LPC1xxx parts)
2012-12-20 22:13:13 -03:00
Werner Almesberger
3ae4978fe8
modules/HIERARCHY: add BGA-256
2012-12-20 22:12:30 -03:00
Werner Almesberger
d9727bbc35
modules/qfn.fpd: NXP "HVQFN33" footprint (without the vias)
...
This is just the basic geometry. The fancy vias need an extension of the
QFN model.
2012-12-20 20:18:49 -03:00
Xiangfu
43aba44c9c
bga.fpd: add ft256
2012-11-22 22:00:20 +08:00
Werner Almesberger
2ed2889fe1
add Panasonic EVQQ7 "joystick" switch
...
Footprint is just draft quality for now.
2012-11-05 17:47:12 -03:00
Werner Almesberger
a82eb0b3f6
modules/ssop.fpd: add TSSOP-16
2012-11-02 23:34:45 -03:00
Werner Almesberger
e30f773962
modules/HIERARCHY: add BGA-324
2012-11-02 23:24:15 -03:00
Xiangfu
3d3be92460
bga.fpd: remove useless frames
2012-11-01 16:38:40 +08:00
Werner Almesberger
ef5fb20f0e
modules/bga.fpd: don't draw outline Nr time. Once is plenty.
...
Moved the "row" loop from the root frame to a new "pads" frame.
2012-11-01 01:41:02 -03:00
Werner Almesberger
e5c8bd997e
modules/bga.fpd: make "row" a loop and use the "row" table only for lookups
2012-11-01 01:30:59 -03:00
Xiangfu
87db42541b
modules: bga: add 324 footprint
2012-11-01 12:18:34 +08:00
Werner Almesberger
92b93912a4
modules/: add E-SWITCH series 320 tact switch
2012-08-22 16:34:32 -03:00
Werner Almesberger
d37268a6ba
modules/: add PAD_S_120x120; correct classification of PAD_S_150x150
2012-08-10 08:48:52 -03:00
Werner Almesberger
26307b35a0
modules/INFO: add resources for ZX62-B-5PA and ZX62M-B-5P
2012-08-03 20:29:52 -03:00
Werner Almesberger
707aa70cf7
modules/zx62-b-5pa.fpd: Hirose ZX62-B-5PA micro-USB B receptacle, std, no posts
2012-08-03 20:28:58 -03:00
Werner Almesberger
932e5aaf78
modules/zx62m-b-5p.fpd: add Y size of rear pads
2012-08-03 20:24:32 -03:00
Werner Almesberger
cbfba8369f
modules/meander-2450MHz.fpd: make all pads "trace" (regression)
...
The ben-wpan boards were built with the antenna as "trace" (i.e., the
copper is covered with solder mask), but then I adapted the wrong
version of the footprint for kicad-libs.
2012-07-19 00:10:19 -03:00
Werner Almesberger
c0e33e5872
modules/usb_a_plug_smt.fpd: mixed TH/SMT; change the two TH pads to "bare"
...
Rationale: if soldering in the SMT process, one probably wants to check
the TH pads anyway, so there is little point in putting solder paste on
them with the hope that some may stick.
If soldering in a separate TH process, solder paste could clog the holes.
2012-07-19 00:04:29 -03:00
Werner Almesberger
9be533bcdc
modules/pads.fpd: make also square and rectangular pads "bare"
2012-07-19 00:03:32 -03:00
Werner Almesberger
00711fd4bc
modules/: make pads of all fully through-hole components "bare"
2012-07-19 00:02:05 -03:00
Werner Almesberger
faedf5694d
modules/usb-a-pcb.fpd: change pad type from "normal" to "bare"
2012-07-18 23:41:26 -03:00
Werner Almesberger
2c9476c011
modules/: add ZX62M-B-BP (zx62m-b-5p.fpd) to catalog and Makefile
2012-07-14 22:46:59 -03:00
Werner Almesberger
9f127475ac
modules/header.fpd: rearrange measurements; add pitch measurement
2012-07-14 22:44:50 -03:00
Werner Almesberger
caa6e50b9c
modules/dip.fpd: add pitch measurement
2012-07-14 22:38:12 -03:00
Werner Almesberger
5ed1670859
modules/: add measurementes to DIP-4/6-300mil; add to catalog and Makefile
2012-07-14 22:37:19 -03:00
Werner Almesberger
563e5944e3
modules/dip.fpd: add measurements
2012-07-13 23:42:36 -03:00
Werner Almesberger
6ff4042bd2
modules/sot.fpd: put width measurement at constant distance from pad
...
It intersected with the pad in the case of SOT-235.
2012-07-13 23:29:56 -03:00
Werner Almesberger
6216a97c22
modules/header.fpd: add measurement of overall length
2012-07-13 23:13:55 -03:00
Werner Almesberger
71075ec705
modules/pads-array.fpd: added measurements; enabled more pads types
...
We now also generate arrays of 2-10 60x60mil, 80x80mil, and 60x120mil
pads, all with a 100 mil spacing.
2012-07-13 23:01:03 -03:00
Werner Almesberger
8114d1d93f
track "gencat" to "genkicat" name change
2012-07-12 20:15:12 -03:00
Werner Almesberger
20f476b930
modules/Makefile: move "clean" and "spotless" at their usual place at the end
2012-07-12 19:19:44 -03:00
Werner Almesberger
5496ac5af6
modules/Makefile (missing): new target to list footprints missing in hierarchy
2012-07-12 19:18:58 -03:00
Werner Almesberger
62fa46c90c
modules/{Makefile, DESCR}: include descriptions in catalog
...
DESCR is just for demonstration purposes. Need to think of a way to
extract descriptions from material we already have.
2012-07-12 18:55:40 -03:00
Werner Almesberger
475ba28158
modules/Makefile: generate list of .fpd files from variable MODULES
...
... instead of scanning the directory. Also commend out the two footprints
currently not included in MODULES (zx62m-b-5p.fpd and dip4of6.fpd).
2012-07-12 16:33:50 -03:00
Werner Almesberger
1d23f0a742
modules/HIERARCHY: enable MEANDER-2450MHz-{right,left}-1.0mm
...
The now longer yield invalid Postscript, so we can include them in the
catalog.
2012-07-12 16:24:50 -03:00
Werner Almesberger
711147c11d
modules/meander-2450MHz.fpd: do not try to add a tail if zero-sized
...
A zero-sized tail would produce a zero-sized pad, which is no longer allowed.
2012-07-12 16:16:01 -03:00
Werner Almesberger
c8d825ddaa
modules/: first elements for catalog creation (WIP)
...
There are still the following problems to solve:
- the index needs wider columns since footprint names tend to be longer
than component names,
- some things are too big and need scaling (maybe fix this in fped),
- the antenna without "tail" produces one of those zero-width pads
fped likes so much
2012-07-12 04:45:43 -03:00
