qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 23:21:45 +02:00
Code
22,330 Commits 13 Branches 0 Tags 117 MiB
1e38789510
Commit Graph

1407 Commits

Author SHA1 Message Date
juhosg
13e0098939 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29010 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:54 +00:00
juhosg
4cc612872a ar71xx: fix occasional kernel hangs during boot on AR934x 
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29009 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:52 +00:00
juhosg
5fb5b4483b ar71xx: refresh kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29008 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:51 +00:00
juhosg
0999f2be56 ar71xx: use the button for WPS control on the DB120 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28990 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:20 +00:00
juhosg
69a4e7ba6a ar71xx: register the second ethernet interface on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28989 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:19 +00:00
juhosg
f42393b3c6 ar71xx: implement SoC specific phy interface setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28988 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:18 +00:00
juhosg
428566d3de ar71xx: move phy interface setup into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28987 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:16 +00:00
juhosg
9c2632e5aa ar71xx: register both MDIO bus on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28986 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:59 +00:00
juhosg
8255c166fd ar71xx: add AR934X specific MDIO registration code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28985 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:56 +00:00
juhosg
79bc01d085 ar71xx: add a secondary mdio bus 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28984 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:54 +00:00
juhosg
4e5c6e94da ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28983 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:50 +00:00
juhosg
f20b056795 ar71xx: add an id argument to ar71xx_add_device_mdio 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28982 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:48 +00:00
juhosg
7d1b33ecbd ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28981 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:42 +00:00
juhosg
1553f9eabd ar71xx: add AR934x specific USB setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28980 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:20 +00:00
juhosg
5f0b41bae5 ar71xx: register the first ethernet interface on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28979 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:18 +00:00
juhosg
8a3f26299d ar71xx: allow to register ethernet interfaces for AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28978 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:17 +00:00
juhosg
3cd36281d9 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28977 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:16 +00:00
juhosg
a1f5559837 ar71xx: add AR934X specific bootstrap and reset register bits 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28976 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:15 +00:00
juhosg
a3d2129487 ar71xx: add diag support for the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:10 +00:00
juhosg
bb977eb73b ar71xx: fix GPIO direction setup for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28974 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:09 +00:00
juhosg
1d1240855a ar71xx: fix AR934X clock frequency calculation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28973 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:08 +00:00
juhosg
b780360c45 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig 
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28971 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:04 +00:00
nbd
33f4cde7a9 ar71xx: remove dead code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:33:20 +00:00
nbd
4677737b0a ar71xx: on ar7240, exclude ports from their own port vlan destination mask 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:33:15 +00:00
juhosg
e3ad4fdef0 ar71xx: create TL-WA901ND network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28833 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:24 +00:00
juhosg
53b106bac4 ar71xx: create ALL0258N network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28832 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:23 +00:00
juhosg
6827eb6991 ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28831 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:20 +00:00
juhosg
cec23da75a ar71xx: create WZR-HP-G300NH network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28830 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:17 +00:00
juhosg
78fd771952 ar71xx: create RB-493G network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28829 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:12 +00:00
juhosg
27b52397f9 ar71xx: create TL-WR1043ND network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28828 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:11 +00:00
juhosg
97783936b3 ar71xx: create WRT160NL network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28827 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:09 +00:00
juhosg
9a2f4e2196 ar71xx: create PB92 network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28826 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:08 +00:00
juhosg
55fb18f8e1 ar71xx: create DIR-825-B1 network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28825 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:07 +00:00
juhosg
c46cd218f0 ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28824 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:03 +00:00
juhosg
b9aab9ba7e ar71xx: create RB-450 network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28823 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:02 +00:00
juhosg
e1af0acf19 ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28822 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:01 +00:00
juhosg
989312537f ar71xx: create RB-433{,U} network config from uci defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28821 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:58 +00:00
juhosg
0c1f9db114 ar71xx: create even more network configs from the uci-defaults script 
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28820 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:56 +00:00
juhosg
08c0787d79 ar71xx: create more network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28819 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:54 +00:00
juhosg
15334c9058 ar71xx: create a bunch of network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
a single ethernet interface.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28818 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:52 +00:00
juhosg
7a36f263be ar71xx: create generic network config from an uci-defaults script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28817 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:51 +00:00
juhosg
650912aa45 ar71xx: remove AP81 defconfig, it is the same as the generic config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28816 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:34:33 +00:00
juhosg
ebf7a3e2f9 ar71xx: change generated Buffalo firmware versions 
With version 1.76 the upgrade may fail with newer Buffalo firmwares with
a message like this:
"You can not update the firmware because the firmware version is earlier
than 1.82. Please use 1.82 or later version for firmware update."

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28815 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:34:32 +00:00
juhosg
03dd4c25f7 ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28812 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 20:25:00 +00:00
juhosg
8c1109a28d ar71xx: wrap long lines in the upgrade script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28811 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 20:24:59 +00:00
juhosg
1823bd18f8 ar71xx: fix WHR-HP-G300N firmware partition offset 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28810 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 20:24:57 +00:00
juhosg
ab5f1e4aa3 ar71xx: add default network configuration for the WHR-HP-GN 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28807 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 13:32:43 +00:00
juhosg
8853be8e17 ar71xx: build image for the Buffalo WHR-HP-GN 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28806 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:11 +00:00
juhosg
266baaf0dd ar71xx: add support for the Buffalo WHR-HP-GN board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28805 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:10 +00:00
juhosg
24f3dbc411 ar71xx: build image for the Buffalo WHR-G301N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28804 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:08 +00:00
juhosg
17990be972 ar71xx: add support for the Buffalo WHR-G301N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:07 +00:00
juhosg
e1c0ad196a ar71xx: fix WHR-HP-G300N image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28802 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:05 +00:00
juhosg
358394e594 ar71xx: enable WHR-HP-G300N support in kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28801 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:04 +00:00
juhosg
29f0664566 ar71xx: fix WHR-HP-G300N MTD partitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28800 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:03 +00:00
juhosg
38ba6904bb ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 14:38:12 +00:00
juhosg
fc6e7aeeb6 ar71xx: build image for the TL-WR741ND v4 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28708 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:55 +00:00
juhosg
77da44561c ar71xx: add initial support for the TL-WR741ND v4 board 
The ethernet port LEDs are not working yet.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:52 +00:00
juhosg
2fb031808c ar71xx: add AR933X GMAC register defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:50 +00:00
juhosg
0f535ad261 ar71xx: combine LEDs setup in one file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:49 +00:00
juhosg
0fe49305de ar71xx: unify LED names on Planex boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28703 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:47 +00:00
juhosg
54e69d54d6 ar71xx: unify LED names on Buffalo boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28702 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:46 +00:00
juhosg
46393cef66 ar71xx: unify LED names on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28701 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:44 +00:00
juhosg
11cfb889eb ar71xx/all0258n: sysupgrade support 
U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be
stored in the U-Boot environment.
If the checksums don't match during boot, a failsafe-system is booted instead.
This patch adds a board-specific sysupgrade hack for the all0258n which
calculates and updates the checksums for the U-Boot environment.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28700 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 09:23:32 +00:00
juhosg
52378540af ar71xx/all0258n: add default config 
This adds default network and uboot-env settings for the ALL0258N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28699 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 09:23:31 +00:00
juhosg
be7781d3ef ar71xx: remove default network config of the mzk-w04nu board as well 
It works with the generic config.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28695 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 09:23:25 +00:00
juhosg
1e4e4a0fab ar71xx: remove LED setup of nonexistent interfaces on RB750 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28693 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-31 14:26:56 +00:00
juhosg
c586df7775 ar71xx: remove default network config of the wnr2000 board 
It is the same as the generic configuration.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28692 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-31 14:26:51 +00:00
juhosg
5a382347ed ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value 
Aparently $magic_long was meant here instead of $magic when comparing with
32-bit values.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28678 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-30 13:06:30 +00:00
juhosg
e160695e43 ar71xx: fix typos in image/Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28618 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:52 +00:00
juhosg
85713e36cb ar71xx: add initial support for the OpenMesh OM2P board 
Based on a patch by Marek Lindner <marek@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28617 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:51 +00:00
juhosg
8256ef2e81 ar71xx/all0258n: fix partition layout 
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28615 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:47 +00:00
juhosg
b4979fee64 ar71xx: create image for the WNDR3800 
This adds support for the Netgear WNDR3800, it is almost the same as
the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28597 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-26 06:12:47 +00:00
juhosg
165b64f3f8 ar71xx: build image for the Buffalo WHR-HP-G300N 
Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:29 +00:00
juhosg
c01dd82e04 ar71xx: Buffalo WHR-HP-G300N kernel support 
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:26 +00:00
juhosg
0475f34e05 ar71xx: build image for the Allnet ALL0258N board 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28565 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:23 +00:00
juhosg
61504e67d9 ar71xx: add kernel support for the Allnet ALL0258N board 
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28564 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:21 +00:00
juhosg
afc3633a2e ar71xx: don't override CONFIG_FSNOTIFY 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28563 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:18 +00:00
jow
fbebd1e720 [ar71xx] base-files: make sure inittab-console-fixup returns with success (#10275) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:35:43 +00:00
jogo
0f7b0ae7de linux: ar71xx: add support for Mikrotik Routerboard RB493G 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28423 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-11 23:05:16 +00:00
jogo
0f944343dd ar71xx: add a workaround for ar8316 not always driving the TA bit to low 
AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit
to low despite returning a valid value. Ignore it and just use the
returned value anyway.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28422 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-11 23:05:13 +00:00
jogo
d066413d5d ag71xx: close a race between the phy state machine and link state 
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.

Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28380 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-08 11:37:14 +00:00
juhosg
8d0d02042c ar71xx: fix MAC addresses on the DIR-825-B1 board 
Patch-by: Lukas Kuna

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28295 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-23 19:56:39 +00:00
juhosg
a46904b68e ar71xx: enable login only on the system console by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28294 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-23 19:56:38 +00:00
juhosg
e6dc3fc7e8 ar71xx: build images for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28279 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:56 +00:00
juhosg
5fdfc7948a ar71xx: add support for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28277 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:53 +00:00
juhosg
8f241d9a09 ar71xx: add AR933x specific USB setup function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28276 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:51 +00:00
juhosg
3a5386be36 ar71xx: add ar71xx_device_reset_rmw helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28275 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:50 +00:00
juhosg
0316b118d0 ar71xx: fix copy&paste bug in WZRHPAG300H profile description 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28274 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:48 +00:00
juhosg
f580569c07 ar71xx: remove 'default [yn]' from machine Kconfig entries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28273 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:47 +00:00
juhosg
5bc57a6b20 ar71xx: sort AR71XX_MACH_* entries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28272 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:45 +00:00
juhosg
53b7e66b1c ar71xx: create image for the TP-Link TL-WR743ND v1 
Same hardware as WR741ND but with PoE support.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28271 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:44 +00:00
juhosg
36b03a3e5b ar71xx: create image for the TP-Link TL-WR740N v3 
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28269 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:40 +00:00
nbd
3c978d1604 ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28213 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-11 17:44:12 +00:00
nbd
8708bcc2d3 ar71xx: do not count normal interrupts as spurious (fixes #10037) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28182 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-06 05:38:23 +00:00
nbd
e81933ed31 ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28173 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-05 18:37:48 +00:00
nbd
25d7a6da6c ar71xx: fix ethernet PLL setting on ar7242 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28124 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-29 21:23:46 +00:00
hauke
4bf096096c kernel: update kernel to version 2.6.39.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28022 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-16 22:04:10 +00:00
nbd
db5c8f65ca ar71xx: add some code to detect DMA stuck conditions on ar7240 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-13 22:30:14 +00:00
nbd
5051a6677f ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27973 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-13 21:49:46 +00:00
nbd
65dea0f0b1 ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27959 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-11 13:52:40 +00:00
jogo
8e38afe0f0 ar71xx: make ehci patch apply again 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27951 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-10 23:02:56 +00:00
nbd
733ef74e71 ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h images (#9918) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27950 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-10 22:24:56 +00:00
juhosg
1cdb033fe9 ar71xx: fix image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27907 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-05 10:31:52 +00:00
juhosg
cc9b5b3507 ar71xx: enable sysupgrade on the AP96 and DB120 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27901 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 19:41:18 +00:00
juhosg
700dd5a8c6 ar71xx: use the same test for AP121 and Zcomax sysupgrade images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27900 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 19:41:17 +00:00
juhosg
45aa4b5327 ar71xx: cleanup image generation Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27899 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 19:41:16 +00:00
nbd
571d12ab3a ar71xx: fix ethernet FIFO state corruption on ar7240 
When starting/stopping DMA sometimes the FIFO state gets corrupted,
leading to wildly fluctuating latencies or packet data corruption.
Fix this by issuing a fast MAC reset as soon as the link is detected
as up. Fixes #9689, #9405

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27896 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 17:36:31 +00:00
nbd
27818ae524 ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop 
When the DMA engine state gets corrupted due to a hardware issues, it
often won't stop rx until a full reset is issued. In that case the hardware
must keep a valid descriptor, otherwise it will write to random places in
system RAM, triggering random crashes. To fix this, keep a dummy descriptor
without a buffer that keeps the DMA engine in a sane state until the reset
is done

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27895 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 17:36:27 +00:00
nbd
3fe5c4149b ar71xx: fix MAC/MDIO reset mask handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27894 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 17:36:23 +00:00
nbd
8fb4b275c2 ar71xx: add some hacks to work around the misalignment in IP packets received on AR71xx and AR91xx ethernet MACs 
decreases CPU load with the default firewall for routing 95 mbit/s from 78% to 55%

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27878 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-02 15:12:08 +00:00
jogo
e5839cb102 ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH 
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27814 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 11:57:51 +00:00
nbd
005e21d6ac ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27756 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 14:40:35 +00:00
nbd
de95026813 rtl8366: unify rtl8366s and rtl8366rb platform data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27754 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 14:40:23 +00:00
nbd
c9e45803ce ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27739 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 08:02:20 +00:00
nbd
3bad82d2e7 ar71xx: reinitialize global switch settings after reset on ar7240 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 14:39:47 +00:00
nbd
340551c062 ar71xx: configure address aging on ar7240 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27704 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 14:39:42 +00:00
nbd
8ea4f149b0 ar71xx: reset the phy in the ethernet init on ar724x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27703 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 12:04:34 +00:00
nbd
96c14099ce ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27702 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 12:04:29 +00:00
nbd
9dfcd7e5e2 ar71xx: increase the delay after the ethernet MAC reset 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27701 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 12:04:25 +00:00
nbd
db4cd49d62 ar71xx: fix an unused variable warning 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27700 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 12:04:20 +00:00
nbd
ec8e57edd9 ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-09 06:30:13 +00:00
nbd
cc32100390 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-09 06:29:46 +00:00
juhosg
d3310ebab9 ar71xx: build image for the AP121 boards with 4M of flash 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27523 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 13:01:50 +00:00
juhosg
142740d87d ar71xx: add separate profiles for the AP121 and AP121-MINI boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 13:01:48 +00:00
juhosg
ff21374f6a ar71xx: fix building of squashfs images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-04 12:10:03 +00:00
nbd
56e7a18c3e ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27434 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-04 03:03:34 +00:00
juhosg
547c706620 ar71xx: use 4k image only for the AP121 board 
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27357 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-02 08:37:59 +00:00
jow
422a78af7a [ar71xx] revert r27043 (#9513) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27343 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 19:52:57 +00:00
jow
c3c5977bfa [ar71xx] revert r27341, it introduce wrong behaviour for other models 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27342 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 19:15:45 +00:00
jow
0678f5f577 [ar71xx] turn status LED off if device finished initializing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27341 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 18:39:53 +00:00
juhosg
14ca52f672 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code 
The config option has been removed in 2.6.39.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27320 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-30 12:15:33 +00:00
juhosg
5c047f9906 ar71xx: merge 2.6.39 patches 
Also remove the old UART driver for ar933x.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27314 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:37 +00:00
juhosg
e70980e097 ar71xx: remove 2.6.37 support as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27313 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:36 +00:00
juhosg
d9b5b92778 ar71xx: remove 2.6.38 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27312 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:34 +00:00
juhosg
1c570d4d17 ar71xx: switch to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27311 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:33 +00:00
juhosg
da1bd2aad6 ar71xx: add 2.6.39 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27310 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:32 +00:00
juhosg
48cf86296e ar71xx: remove ar71xx_gpio_irq_set_type 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27309 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:30 +00:00
juhosg
47d06a3f16 ar71xx: add separate handlers for IP3 interrupts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27308 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:29 +00:00
juhosg
32852643ef ar71xx: use separate handlers for IP2 interrupts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27307 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:28 +00:00
juhosg
62be67eb01 ar71xx: remove useless irq_desc.status initializations 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27306 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:27 +00:00
nbd
e00ba06f78 ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27283 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 13:54:42 +00:00
nbd
40ad0e2ed9 ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27282 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 13:48:47 +00:00
juhosg
8738d0666a ar71xx: cleanup AR933X UART driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27222 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 13:17:51 +00:00
juhosg
4a96046040 ar71xx: fix uart clock frequency for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27221 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 13:17:50 +00:00
juhosg
63dccaf23b ar71xx: use ar933x_uart.h in the AR933X serial driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27166 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 08:12:40 +00:00
juhosg
83e2548ec8 ar71xx: update early_printk code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 08:12:38 +00:00
acinonyx
3f2561bdea [ar71xx] Remove trailing spaces, convert spaces to tabs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27153 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-09 19:30:50 +00:00
nbd
a6c1bd4558 ar71xx: override inittab to enable login on ttyATH0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27128 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-07 17:07:10 +00:00
juhosg
377e161817 ar71xx: setup wdt_clock for AR913X to avoid a kernel bug 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 12:30:10 +00:00
juhosg
7d535a19ed ar71xx: select the internal antenna by default on the ZCN-1523H boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27101 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 12:30:09 +00:00
nbd
480dfda6ec Revert "ar71xx: only enable the rx engine after the link is up..." 
It messes up the DMA state when the link goes down

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27088 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 18:15:43 +00:00
juhosg
3db28f9561 ar71xx: init external_reset for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27083 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:30 +00:00
juhosg
1bab920361 ar71xx: add external_reset field to ath9k_platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27082 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:28 +00:00
juhosg
037092a862 ar71xx: init get_mac_revision on AR9330 rev 1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27081 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:27 +00:00
juhosg
03659f9521 ar71xx: add get_mac_revision to ath9k_platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27080 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:26 +00:00
juhosg
9657aff1ae ar71xx: export SoC revision 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27079 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:24 +00:00
nbd
1eeba399c6 ar71xx: add profile and image building code for wzr-hp-ag300h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27076 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 02:23:30 +00:00
nbd
50919ca9e2 ar71xx: add kernel support for the buffalo wzr-hp-ag300h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27075 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 02:23:26 +00:00
juhosg
269c6430d7 ar71xx: build images for the AP121 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27070 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:47 +00:00
juhosg
165010d573 ar71xx: add sysupgrade support for the AP121 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27069 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:45 +00:00
juhosg
5d12cb1277 ar71xx: add default network config for the AP121 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27068 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:44 +00:00
juhosg
92fa0b3f16 ar71xx: add support for the AP121/AP121-MINI reference boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27067 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:43 +00:00
juhosg
7c4adb453c ar71xx: register UART for the AR933X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27066 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:42 +00:00
juhosg
1c869e33cc ar71xx: add serial driver for the AR933X UART 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27065 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:40 +00:00
juhosg
5e832d5f35 ar71xx: add WMAC initialization code for the AR933X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27064 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:39 +00:00
juhosg
b33cedf6fa ar71xx: add ethernet initialization for the AR933X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27063 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:37 +00:00
juhosg
aa6b4cd97a ar71xx: enable USB support for the AR933x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27062 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:36 +00:00
juhosg
6f45adddfe ar71xx: add AR933x specific glue for ar71xx_device{start,stop} 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27061 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:35 +00:00
juhosg
c7eb38661b ar71xx: the watchdog uses the reference clock on the AR933x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27060 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:34 +00:00
juhosg
0570263dcb ar71xx: add AR933x specific glue code for IRQ initialization 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27059 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:32 +00:00
juhosg
771bbc30cf ar71xx: don't register 8250 UART on the AR933x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27058 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:31 +00:00
juhosg
4cae90b75b ar71xx: enable GPIO support for the AR933x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27057 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:30 +00:00
juhosg
046f6d9c97 ar71xx: add AR933x specific frequency initialization code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27056 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:29 +00:00
juhosg
9d012c4aae ar71xx: add AR933x specific early_printk support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27055 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:27 +00:00
juhosg
a5e8c5446f ar71xx: add preliminary support for the Atheros AR933x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27054 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:26 +00:00
juhosg
68169c24f2 ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2 
NETGEAR doesn’t produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use 29763654+16+64 as their hd_id value.

This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.

There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27053 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:25 +00:00
juhosg
fc50c6a3b6 ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27051 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:22 +00:00
juhosg
eaa759a8e5 ar71xx: Fix header offset for newer WRT160NL models 
Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
resulting in miscalculated partition sizes.
Since the actual sizes did not change, hardcode them to their current
sizes, and make sure they are at least one erase block big (in case Cisco
decides to start to use chips with 128K erase blocks).

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27049 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:20 +00:00
juhosg
5b9155beba ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27048 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:19 +00:00
juhosg
92e4bfb535 ar71xx: reduce the size of the squashfs-4k binaries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27047 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:18 +00:00
juhosg
bd8a2aaee9 ar71xx: initialize is_clk_25mhz field for AR9340 WMAC 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27045 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:15 +00:00
juhosg
c772123439 ar71xx: sync ath9k_platform_data.h with compat-wireless 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27044 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:14 +00:00
juhosg
ee7a116328 ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27043 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:13 +00:00
juhosg
20d6650643 ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27042 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:12 +00:00
juhosg
75e1476cce ar71xx: ag71xx: make ring sizes configurable via ethtool 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27041 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:10 +00:00
juhosg
a137dec884 ar71xx: ag71xx: prepare to make ring sizes configurable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27040 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:09 +00:00
juhosg
940317dc35 ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define 
Reported-by: Dave Täht <dave.taht@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27039 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:07 +00:00
nbd
debcf79f90 ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27035 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-30 23:08:01 +00:00
nbd
20aef6d6fc ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27034 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-30 23:07:57 +00:00
matteo
005a65e01d ar71xx: don't probe the LAN PHY 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26924 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-17 11:15:24 +00:00
matteo
483991c363 ar71xx: detect link on LAN ports 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-17 11:12:56 +00:00
matteo
511dea0dac ar71xx: add link detection on Ubiquiti devices WAN port 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26891 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-14 23:31:50 +00:00
matteo
51053e7640 use correct macros and frame size in ag71xx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26890 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-14 23:10:06 +00:00
matteo
0cbd6d9057 ar71xx: cosmetic fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26889 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-14 23:08:00 +00:00
juhosg
b500b67652 ar71xx: populate LED3 on the JA76PF board 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26862 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:51 +00:00
juhosg
b3a8c8a5ce ar71xx: add uci config for the WLAN LED on the WRT160NL 
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26861 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:49 +00:00
juhosg
a1c5a3da98 ar71xx: use phy0tpt trigger for the WLAN LEDs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26860 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:48 +00:00
juhosg
5b6a159d03 ar71xx: remove superfluous fifo_cfg overrides 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26859 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:46 +00:00
juhosg
bb14a2f07c ar71xx: ag71xx: make switch register access atomic 
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26856 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 16:32:53 +00:00
juhosg
0511a7adf1 ar71xx: ag71xx: fix section mismatch warnings 
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26855 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 13:30:36 +00:00
juhosg
14088891b0 ar71xx: ag71xx: fix build error if debugfs is enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26854 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 13:30:26 +00:00
juhosg
e5061b1935 ar71xx: ag71xx: add debugfs entry for [rt]x_ring 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26845 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:34 +00:00
juhosg
5155342ee7 ar71xx: ag71xx: add timestamps to ag71xx_buf 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:28 +00:00
juhosg
5e10b16d95 ar71xx: ag71xx: use dynamically allocated buffer for napi_stats 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:26 +00:00
juhosg
f6816e49d9 ar71xx: ag71xx: use debugfs_remove_recursive 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26842 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:25 +00:00
juhosg
193e04ebee ar71xx: override wmac device name for the AR934x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26840 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 09:23:32 +00:00
acoul
348cbe4bd3 linux/ar71xx: add some missing symbols for nand/yaffs targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26827 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-05 07:19:46 +00:00
nbd
118a9c5154 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26779 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-28 21:27:42 +00:00
nbd
8220523bad ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26777 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-28 19:30:49 +00:00
acoul
b7a26a735b linux/ar71xx: update wget2nand script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26747 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-21 12:38:25 +00:00
acoul
dfba2f5fb1 linux/ar71xx: add 2.6.38 preliminary support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26746 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-21 11:45:23 +00:00
nbd
e54866b2fb ar71xx: enable the ip17xx PHY driver (fixes #5193, #8027) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26670 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-14 23:51:12 +00:00
nbd
c39d45cf13 ar71xx: replace the madwifi profile with an ath5k profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-12 21:10:45 +00:00
juhosg
b5cfb56ed4 ar71xx: fix build error w/o CONFIG_PCI 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26606 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-12 13:14:56 +00:00
juhosg
73318c1013 ar71xx: don't hardcode console parameters in kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26605 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-12 13:14:53 +00:00
juhosg
ec1dcc5bda ar71xx: use the gpio_keys_polled driver instead of gpio_buttons 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26603 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-12 09:29:21 +00:00
juhosg
b47906964d ar71xx: Add support for WZR-HP-G301NH 
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26601 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-12 09:29:10 +00:00
juhosg
2be7aaf5c2 ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26595 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-11 17:37:08 +00:00
juhosg
613a88e6a5 ar71xx: fix AR934X_WMAC_SIZE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26594 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-11 17:37:03 +00:00
juhosg
9330419fa7 ar71xx: fix section mismatch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:47:55 +00:00
juhosg
f2a69b10a8 ar71xx: rename ar934x_ref_freq to ar71xx_ref_freq 
Also initialize that for each SoC and print its value along with the
other frequencies.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:47:52 +00:00
juhosg
f4bb6b6582 ar71xx: show the SoC type earlier 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26560 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:47:50 +00:00
juhosg
8de3a1a306 ar71xx: cleanup SoC detection code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26559 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:47:49 +00:00
juhosg
b9fe109d2b ar71xx: sync kernel configuration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26558 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:47:45 +00:00
juhosg
db38ac7711 ar71xx: Fix mac address offset for AR934x 
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:47:42 +00:00
juhosg
b1f3482e70 ar71xx: add DB120 board specific PCI initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26523 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:41 +00:00
juhosg
004690a661 ar71xx: register WMAC device on the DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:37 +00:00
juhosg
ce9abcca4a ar71xx: add support for the built-in WMAC of the AR934x 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26521 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:34 +00:00
juhosg
005ecd4268 ar71xx: create a separate profile for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26520 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:25 +00:00
juhosg
930932005d ar71xx: build firmware image for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26519 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:23 +00:00
juhosg
e018221576 ar71xx: add initial support for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26518 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:19 +00:00
juhosg
475f894967 ar71xx: indicate AR934x support in menuconfig 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26517 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:14 +00:00
juhosg
7072aeaf32 ar71xx: add support for the watchdog of the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26516 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:10 +00:00
juhosg
b21a1fabc6 ar71xx: enable PCI for the AR934[24] SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26515 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:05 +00:00
juhosg
d6c448b131 ar71xx: enable USB support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:03 +00:00
juhosg
3167111b62 ar71xx: enable GPIO support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:00 +00:00
juhosg
7763501529 ar71xx: add AR934x specific glue for ar7100_device{start,stop} 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26512 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:52:57 +00:00
juhosg
2c08ed8f8b ar71xx: add AR934x specific UART clock initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26511 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:52:53 +00:00
juhosg
c5000fc993 ar71xx: add AR934x specific glue for IRQ initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26510 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:52:49 +00:00
juhosg
a5bba4d8fb ar71xx: add initial support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26509 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:52:45 +00:00
hauke
84b3048574 kernel: Update to version 2.6.37.6 
Thank you Peter Wagner for the patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26441 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-03 13:59:07 +00:00
nbd
76707734e8 ar71xx: use DEFAULT:= in the uboot-ar71xx package instead of adding uboot to the profiles, fixes imagebuilder issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26401 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-02 12:43:21 +00:00
nbd
abc719ecfd ar71xx: enable access to the WAN port PHY on a few devices, adds WAN link detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26394 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-02 00:47:33 +00:00
nbd
7569a2e88f ar71xx: only allow internal access to the ar7240 switch, export the MDIO bus behind the switch instead 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26393 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-02 00:47:29 +00:00
nbd
fd5cb87889 ar71xx: frequent ethernet mac resets upset the MDIO bus on ar7240, so do not run them on every device open, only on tx timeouts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26392 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-02 00:47:25 +00:00
nbd
d46648401a global cflags: remove -funit-at-a-time, it is ignored by recent compilers. instead add -fno-caller-saves, which improves compression ratio for generated code with no apparent negative effects on performance 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26300 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-26 01:07:12 +00:00
jow
957986717f [ar71xx] fix image generation in the Image Builder environment 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26271 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-22 18:56:55 +00:00
kaloz
946c99ded8 update to 2.6.32.33 and 2.6.37.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26226 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-18 13:25:32 +00:00
nbd
cf9aad98a9 ar71xx: remove 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26211 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-17 20:08:44 +00:00
nbd
4ec32399c2 ar71xx: add default configuration for the switch on AP96 
Enables forwarding of frames between the switch ports (eth0).
Patch by Jouni Malinen

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26180 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-15 19:51:42 +00:00