qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-28 20:58:06 +02:00
Code
15,728 Commits 13 Branches 0 Tags 117 MiB
592aaa1ba6
Commit Graph

5381 Commits

Author SHA1 Message Date
agb
76e192d94c [rdc] 2.6.28: remove zero-byte patch left by last commit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18255 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-01 06:24:34 +00:00
agb
cbd083f77e [rdc] 2.6.28: add ZyXEL and Amit flashmapping and start fixing up GPIO support. Thanks Daniel Gimpelevich 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18254 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-01 05:34:46 +00:00
agb
100ec06353 [brcm-2.4] fix failsafe, was accidentally broken by r18214. Thanks Daniel Gimpelevich 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18253 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-01 01:09:56 +00:00
juhosg
f622ac94c8 ixp4xx: the missing phy_disconnect call has been added in upstream, remove that patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18252 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-31 20:10:34 +00:00
juhosg
2d033cdc39 ixp4xx: remove bogus 'eth%d: MII PHY x on NPE-x' messages 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18251 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-31 20:10:30 +00:00
florian
56311db0ca [olpc] alway include kmod-libertas by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18245 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-31 12:29:14 +00:00
florian
15e0985ea5 [rdc] refresh 2.6.30 kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18231 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 16:24:52 +00:00
florian
ddcb850f7b [kernel] fix build failures on include/scsi/scsi.h, spotted by udev compilation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18230 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 16:24:20 +00:00
juhosg
a1509a7028 ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18229 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 15:15:41 +00:00
juhosg
ad1488bf57 ar71xx: sync 2.6.31 kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18227 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 12:26:28 +00:00
juhosg
1d2b1e7279 ar71xx: add preliminary support for the TL-WR841ND v5 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18226 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 12:26:25 +00:00
juhosg
0724c81c22 ar71xx: use soc specific divider for mdio clock 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18225 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 12:26:22 +00:00
juhosg
5be08769f3 ar71xx: update mdio_reset code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18224 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 12:26:17 +00:00
juhosg
8b79390edb ar71xx: add missing profiles for the TL-WR841ND v3 and MZK-W300NH boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18223 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 12:26:14 +00:00
juhosg
e75593217a ar71xx: simplify image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18222 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 12:26:10 +00:00
florian
877e45fb1d [kernel] remove no longer used configs and patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18221 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 09:55:53 +00:00
blogic
7a9d219092 [ramips] missing header file changes, and fix mtu value 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18220 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 09:18:40 +00:00
Xiangfu Liu
1652213e92 [U-BOOT] fix init 2009-10-30 15:44:24 +08:00
Lars-Peter Clausen
44e92dbd5d gpm940b0: Select high driver frequency 
Fixes flicker.
 2009-10-30 02:18:31 +01:00
thepeople
163074a14b fix my typo 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18219 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 01:08:11 +00:00
thepeople
09e306ce30 add WRT350Nv1 target, thanks sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18218 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 01:05:37 +00:00
florian
5e0a41a041 [olpc] make the kernel also output on ttyS0 and ask openfirmware to unfreeze the screen 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18216 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 23:35:54 +00:00
florian
30576ebab8 [olpc] ext2 images need to wait for /dev/sda2 to appear before attempting to mount it, fixes olpc boot on ext2 images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18215 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 23:34:39 +00:00
blogic
70916d05de make etehrent work on wrt350n, thx sn9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18214 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 21:26:36 +00:00
blogic
f46dbe37e1 [ramips] fixes rx path for eth, spinlock it, increases buffer size, board now survives ping -f 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18212 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 21:08:11 +00:00
florian
b08f29cbc9 [at91] fix u-boot installation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18208 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 16:03:15 +00:00
florian
7ac41a58e0 [at91] fix u-boot linking failure with an EABI toolchain 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18207 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 16:00:37 +00:00
florian
6bc0d61369 [at91] fix dfboot linking failures (#5937) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18206 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 15:48:34 +00:00
florian
eb47209914 [brcm63xx] do not generate trx images, this is useless 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18204 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 13:39:29 +00:00
blogic
7616e48d77 [ramips] hopefully fixes dma issues seen on ethernet driver when under high load 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18203 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 12:51:45 +00:00
florian
24168b9159 [kernel] remove support for 2.6.27, no target is using it anymore 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18201 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 12:20:45 +00:00
florian
4a72ea39d6 [kernel] fix build failure on vmlinux.lds with 2.6.31 (#6052) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18199 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 10:55:52 +00:00
florian
6ae3b70899 [kernel] move the forward declaration of struct mtd_info, prevents build failures on arm and mips 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18198 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 10:43:14 +00:00
kaloz
f0bcf0323b ppc40x: use version number-less patches and config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18188 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-27 19:20:31 +00:00
kaloz
e0af8557d2 remove 2.6.28 support from ppc40x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18187 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-27 19:19:07 +00:00
kaloz
9096e2fed8 disable ppc4xx watchdog, it's unreliable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18186 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-27 19:18:02 +00:00
Xiangfu Liu
6293205a75 font SUN8x16 is better 2009-10-28 03:13:33 +08:00
Xiangfu Liu
d0e8e5dbfc update u-boot patch 
Signed-off-by: Xiangfu Liu <xiangfu@qi-hardware.com>
 2009-10-28 03:13:33 +08:00
JieJing.Zhang
907a34b80e jz_battery: fix bug cause kernel panic. 
all about container_of macro.

Signed-off-by: JieJing.Zhang <kzjeef@gmail.com>
 2009-10-28 03:13:33 +08:00
Xiangfu Liu
110c87a5f7 revert commit: 3dbe390f5347b6c279c9d193445e1c86fbee9894 
those change make kernel panic.
 2009-10-28 03:13:33 +08:00
Xiangfu Liu
8319e34599 fix the jz4740_pcm_mmap function 
now Ben can play online Radio
 2009-10-28 03:13:33 +08:00
Jiejing.Zhang
96b315a920 add disable sound amp while sound not playback. 
This will save power of amp.

Signed-off-by: Jiejing.Zhang <kzjeef@gmail.com>
 2009-10-28 03:13:33 +08:00
Xiangfu Liu
6aec1a06bf change system name form OpenWrt to BenNanoNote 2009-10-28 03:13:32 +08:00
Xiangfu Liu
6abb40220e fix the comma and period key 2009-10-28 03:13:32 +08:00
Xiangfu Liu
fa7ec6d7d6 enable the speaker 2009-10-28 03:13:32 +08:00
Xiangfu Liu
e64a14b4fd enable the sound as default 2009-10-28 03:13:32 +08:00
Xiangfu Liu
3843e5f1af upgrade u-boot to 2009.08 2009-10-28 03:13:32 +08:00
Lars-Peter Clausen
9eff41dbb1 qi_lb60: Initalize nand paritions and ecc layout depending on the chip size. 2009-10-28 03:13:31 +08:00
Lars-Peter Clausen
cc05485408 jz4740_nand: Add ident_callback 
Add ident_callback which is called after the nand chip has been identified and
before it is setup. This can be used by board code to set partition and ecc info
depending on the chip.
 2009-10-28 03:13:31 +08:00
Lars-Peter Clausen
7fa87373a8 mach-jz4740: Move all non generic code from platform.c to board-qi_lb60.c 
platform.c should only contain the generic platform device definitons,
everything board specific should go into the board file.
 2009-10-28 03:13:31 +08:00
Lars-Peter Clausen
5709f560f9 Cleanup qi-lb60 board code. 2009-10-28 03:13:31 +08:00
Lars-Peter Clausen
9c229a412e Remove old ingenic framebuffer drivers. 
I think it's time to get rid of these
 2009-10-28 03:13:31 +08:00
Lars-Peter Clausen
c84ef25bf3 Merge patches into files. 2009-10-28 03:13:31 +08:00
Lars-Peter Clausen
c456866a4a jz4740_fb: Properly initalize physical video memory address 2009-10-28 03:13:31 +08:00
Florian Fainelli
7df7bde3ac refresh xburst patches 2009-10-28 03:13:30 +08:00
Xiangfu Liu
767987c14e cleaup code style 2009-10-28 03:13:30 +08:00
Xiangfu Liu
d89fdafa97 update power button patch 2009-10-28 03:13:30 +08:00
Mirko Vogt
e818ccc989 use the linux kernel version 2.6.31 (final) 2009-10-28 03:13:30 +08:00
Xiangfu Liu
3dde1ac212 code style cleanup jz4740_nand.c 2009-10-28 03:13:30 +08:00
Xiangfu Liu
ce96b1f2a5 remove init WAKEUP in board-qi_lb60 file 2009-10-28 03:13:30 +08:00
Xiangfu Liu
4fc4138e68 add power button driver 2009-10-28 03:13:30 +08:00
Xiangfu Liu
2f3ac925c4 cleanup-gpm940b0-code-style.patch 2009-10-28 03:13:29 +08:00
Xiangfu Liu
1649bbc3d6 make poweroff command work 2009-10-28 03:13:29 +08:00
Xiangfu Liu
71e391515f cleanup modifier keys driver 2009-10-28 03:13:29 +08:00
Mirko Vogt
a1ef81c12e enable ext3 and (v)fat by default 2009-10-28 03:13:29 +08:00
Mirko Vogt
090ea365ad disabled MMC debug output in default config 2009-10-28 03:13:29 +08:00
Mirko Vogt
204259721b do not use default device type <router> as we do not need dnsmasq, ppp, iptables, etc. for now 2009-10-28 03:13:29 +08:00
Mirko Vogt
c2696d65ee use rootwait instead of rootdelay as it is mor dynamic - however there's no delay needed anyway when booting from nand 2009-10-28 03:13:28 +08:00
Jiejing.Zhang
cd0d71a697 jz-battery: improve code. clear static var. 
1. clear static global var, use platform_get_drvdata.
2. check gpio state before register power supply.

Signed-off-by: Jiejing.Zhang <kzjeef@gmail.com>
 2009-10-28 03:13:28 +08:00
Mirko Vogt
45c720faff add base files for 
- assigning IP 192.168.1.1 per default to usb0-interface (usb-ethernet-gadget)
 - add mountpoint for 1st partrition of sd-card - prelimary for testing purposes
 2009-10-28 03:13:28 +08:00
Xiangfu Liu
2b24518947 enable printk_time 2009-10-28 03:13:28 +08:00
Jiejing.Zhang
c91cec083b jz_battery: improve driver code. 
1. put all gobal var to a driver info struct.
2. check gpio before use it.

Signed-off-by: Jiejing.Zhang <kzjeef@gmail.com>
 2009-10-28 03:13:28 +08:00
Lars-Peter Clausen
ae01e2fb2c Add jz4740-adc.h 2009-10-28 03:13:28 +08:00
Lars-Peter Clausen
90dc5a173c jz4740-ac: Fix some small bugs 2009-10-28 03:13:27 +08:00
Lars-Peter Clausen
bdbda932b8 Compile fix jz4740-battery.c, use adc driver and some other minor cleanups. 
Enable adc and battery.
 2009-10-28 03:13:27 +08:00
Lars-Peter Clausen
7a88b927f8 Add jz4740 ADC driver. 2009-10-28 03:13:27 +08:00
Xiangfu Liu
7c9aa25b12 refresh patch 2009-10-28 03:13:27 +08:00
Xiangfu Liu
9e02463e3e add jz4740_batt.h 2009-10-28 03:13:27 +08:00
Xiangfu Liu
9e7f1e7f1a remove the JZ_BAT_XXX_VOLTAGE define 2009-10-28 03:13:27 +08:00
Jiejing.Zhang
5878098ab3 cleanup more about battery gpio and platform data 2009-10-28 03:13:26 +08:00
Lars-Peter Clausen
4c36a20b10 Add jz4740-rtc driver. 2009-10-28 03:13:26 +08:00
Lars-Peter Clausen
9480e0470b jz4740_fb: Add include guards 2009-10-28 03:13:26 +08:00
Xiangfu Liu
65051a9ad5 cleanup-qi_lb60.h 2009-10-28 03:13:26 +08:00
Xiangfu Liu
cd6b976c21 revert the keyboard.c code. just change the defkeymap.map make all keys work 
also the [Euro] [Degree] [Umlaut] work
 2009-10-28 03:13:26 +08:00
Xiangfu Liu
04429a1771 Fn-modifier-keys-work 2009-10-28 03:13:26 +08:00
Lars-Peter Clausen
918f1072ed Remove i2c. 2009-10-28 03:13:26 +08:00
Xiangfu Liu
08996e7e50 add defkeymap.c, fix the CAPSLOCK not work 2009-10-28 03:13:26 +08:00
Lars-Peter Clausen
4230547879 Some build fixes. 2009-10-28 03:13:26 +08:00
Lars-Peter Clausen
daab2fae9a jz4740: More udc cleanup. Enable usb ethernet gadget. 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
0a70a90d30 jz4740: irq and dma cleanups. 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
f5d7bb60e5 Add qi lb60 sound soc board driver. 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
557e48bc8e Some build fixes. 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
4be762051b Remove 0002-qi_lb60_support_patch. 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
9b4d9a94d6 Oops... those where missing from commit cbecf6e9f1 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
8bb63272c3 jz4740 asoc: Add new internel codec driver. 
Add qi lb60 board support.
Remove unneeded files.
 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
299c9e29ef jz4740: More udc cleanup. Enable usb ethernet gadget. 2009-10-28 03:13:24 +08:00
Lars-Peter Clausen
8c57ef78b6 jz4740: Cleanup Kconfig 2009-10-28 03:13:24 +08:00
Lars-Peter Clausen
fdeff24f83 jz4740: irq and dma cleanups. 2009-10-28 03:13:24 +08:00
Lars-Peter Clausen
d763dfdb80 jz4740_nand: Fix compiler warning 2009-10-28 03:13:24 +08:00
Xiangfu Liu
764fdaf217 unset CONFIG_MMC_BLOCK_BOUNCE make sd card work 
the RedUpPoint combination keys work. [Fn] combination not work
 2009-10-28 03:13:24 +08:00
Lars-Peter Clausen
935e79e5ab More udc cleanup 2009-10-28 03:13:24 +08:00
Lars-Peter Clausen
88f159b443 Cleanup udc driver (a bit). 2009-10-28 03:13:23 +08:00
Xiangfu Liu
055e2e36f7 update cmdline 2009-10-28 03:13:23 +08:00
Xiangfu Liu
89c608c1a0 update cmdline, default boot to nand. u-boot bootdelay set to 0 2009-10-28 03:13:23 +08:00
Mirko Vogt
ee1bee1421 use new display- and fbdriver 2009-10-28 03:13:23 +08:00
Mirko Vogt
c16999abab get rid of obsolete kernel patches and -configs 2009-10-28 03:13:23 +08:00
Mirko Vogt
c64bbe21ab refresh config - use openwrt boot logo 2009-10-28 03:13:22 +08:00
Mirko Vogt
be2beb8dd3 add openwrt boot logo 2009-10-28 03:13:22 +08:00
Mirko Vogt
98d2317905 fix typo 2009-10-28 03:13:22 +08:00
Xiangfu Liu
281d29e9b7 fix the kernel compile error in openwrt 
the patch folder is not correct
 2009-10-28 03:13:22 +08:00
Lars-Peter Clausen
1976b23d08 Set correct color sequnce. 
Add a debug sysfs entry reg which gives direct write access to lcms display
registers.
 2009-10-28 03:13:21 +08:00
Lars-Peter Clausen
3a1ece5ea7 Add lcm driver. 2009-10-28 03:13:21 +08:00
Lars-Peter Clausen
430fba9852 Fix typo. 2009-10-28 03:13:21 +08:00
Lars-Peter Clausen
b8419470a2 Add clock support. Mostly untested. 2009-10-28 03:13:21 +08:00
Xiangfu Liu
fd21fd92e0 make kernel default compile for 2GB NAND flash board 2009-10-28 03:13:21 +08:00
Xiangfu Liu
bdad94fa1a git rebase with master 
fix the patch erro after rebase
 2009-10-28 03:13:21 +08:00
Xiangfu Liu
4c6e0c02ed this option make MMC driver alwasy work when boot 2009-10-28 03:13:20 +08:00
Xiangfu Liu
5b983412c7 add-2gb-nand-support 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:20 +08:00
Xiangfu Liu
26795803ce fix a redefine warning, GPIO_PWM defined in board-qi_lb60.c file 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:20 +08:00
Xiangfu Liu
701937f9f1 this option make MMC not use DMA, so remove this option 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:20 +08:00
Xiangfu Liu
9ac5dc2ca3 try to add lb60 to 2.6.31 kernel 
this is not the work patch.
  just show some work progress.
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:19 +08:00
Xiangfu Liu
f81c2213a2 add-2.6.24-kernel-patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:19 +08:00
Mirko Vogt
59095d9f64 Revert "change default baudrate to 115200" 
This reverts commit 03acb399060bc7b9013f3776b8697915389b4592.
 2009-10-28 03:13:18 +08:00
Mirko Vogt
f010e75458 change default baudrate to 115200 2009-10-28 03:13:18 +08:00
Xiangfu Liu
b9ae82b25f split-0002-patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:18 +08:00
Xiangfu Liu
f5e43476d3 update-kernel-config 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:18 +08:00
Xiangfu Liu
81c4391daf [U_BOOT]add-2GB-nand-support.patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:18 +08:00
Marek Lindner
da2604ac53 [xburst] remove the dash from the filenames 2009-10-28 03:13:17 +08:00
Marek Lindner
2757527f5e inital architecture layout 
Signed-off-by: Florian Fainelli <florian@openwrt.org>
 2009-10-28 03:13:16 +08:00
Xiangfu Liu
ee8a609caf fix [SHIFT,CAPSLOCK] key define 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:15 +08:00
Lars-Peter Clausen
a66785b06c Add gpio pin definitions and functions to configure a pin as a function pin. 2009-10-28 03:13:15 +08:00
Lars-Peter Clausen
8fbe4ebda0 Enable ubi/ubifs and nand verify writes. 2009-10-28 03:13:15 +08:00
Lars-Peter Clausen
297d16a6ec Aligen framebuffer data at page boundary. 2009-10-28 03:13:15 +08:00
Xiangfu Liu
93a92952e6 update-config-file 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:15 +08:00
Xiangfu Liu
20ae439824 fix u-boot eccpos change it to 12 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:15 +08:00
Lars-Peter Clausen
e4334246a3 Allocate jffs2 summery buffer with vmalloc. 2009-10-28 03:13:15 +08:00
Lars-Peter Clausen
a65fb5ef2d reserve bad block area in oob data. 2009-10-28 03:13:15 +08:00
Xiangfu Liu
3aa5222095 revert the jzlcd.h configure to fit the patch file. 
remove 51-fb.patch. we have 051-fb.patch.
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:15 +08:00
Lars-Peter Clausen
35fedaa9e4 Fix some problems in the framebuffer driver. 2009-10-28 03:13:14 +08:00
Lars-Peter Clausen
ebc8c5a149 Add framebuffer driver for the jz4720/jz4740. It's not complete yet but provides 
enough for qi_lb60 support.
 2009-10-28 03:13:14 +08:00
Lars-Peter Clausen
8e033878c9 Add missing irq defintions for gpio, build gpio module and select necessary 
symbols for gpio lib.
 2009-10-28 03:13:14 +08:00
Lars-Peter Clausen
b85721d95f Add matrix keyboard to config. 2009-10-28 03:13:14 +08:00
Lars-Peter Clausen
1cbf56a99d Fix gpio initialisation. 2009-10-28 03:13:14 +08:00
Xiangfu Liu
e20cd0d3eb fix a redefine warning, GPIO_PWM defined in board-qi_lb60.c file 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:14 +08:00
Xiangfu Liu
b5904054fb make lcd work in 2.6.31 
fix typo in driver/video/Makefile
   add some option to driver/video/Kconfig
   update the .config file.

Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:14 +08:00
Mirko Vogt
023bdebb28 add config for 2.6.31 - might need some more love 2009-10-28 03:13:14 +08:00
Mirko Vogt
e765a38f5c switch to linux kernel version 2.6.31-rc6 by default as the generic patchset for 2.6.31 went upstream 2009-10-28 03:13:14 +08:00
Xiangfu Liu
f4db617ed0 change the u-boot and kernel image name 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:13 +08:00
Xiangfu Liu
bb05897208 make the 2.6.31-rc6 compiled in openwrt. 
*add layer7_2 patch fix the iptables compile error
  *remove the 'sizes.h' include in jz_mmc.c
  *chmod -x jz_mmc.*
  *not make uImage in Makefile, let openwrt do it.

Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:13 +08:00
Xiangfu Liu
10b1e8ca0c cleanup the 2.6.31-rc6 050-nand.patch 200-qi_lb60.patch 
there is repeat code in platform.c file and 050-nand.patch
   make 200-qi_lb60.patch no warning.

Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:13 +08:00
Lars-Peter Clausen
7d446f792e Add 2.6.31 patches and files. 2009-10-28 03:13:13 +08:00
Xiangfu Liu
f58d88c0f1 this option make MMC not use DMA, so remove this option 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:13 +08:00
Mirko Vogt
6e1aa6e45c the forgotten one :) 2009-10-28 03:13:13 +08:00
Mirko Vogt
2d3cd80303 drop out all mtd-related changes made by ingenic 2009-10-28 03:13:12 +08:00
Mirko Vogt
c16fafb1df purge out mtd-utils 2009-10-28 03:13:12 +08:00
Mirko Vogt
0fd039053c purge out OSS stuff as it's obsolete, does not compile and isn't worth the time fixing it 2009-10-28 03:13:12 +08:00
Mirko Vogt
8fc6527893 cautious cleanup of ingenic patch 2009-10-28 03:13:12 +08:00
Mirko Vogt
42f21cc2a7 deselect oss stuff as it does not compile - it's obsolete and will be dropped out anyway... 2009-10-28 03:13:12 +08:00
Mirko Vogt
4cd0737e57 add config for linux kernel version 2.6.27 based on the config for 2.6.25 2009-10-28 03:13:11 +08:00
Mirko Vogt
dc3d3f1c49 yet another patchset - 2.6.27 
it's basically also provided by ingenic and nativly based on 2.6.27,
adjusted to fit into the OpenWrt-environment
 2009-10-28 03:13:11 +08:00
Xiangfu Liu
4a72d4b2fe should-use-DMA-in-mmc 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:10 +08:00
Xiangfu Liu
aa38f1d23a try to add lb60 to 2.6.31 kernel 
this is not the work patch.
  just show some work progress.
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:10 +08:00
Xiangfu Liu
f407b215f1 add-2.6.24-kernel-patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:10 +08:00
Xiangfu Liu
4808ec76e8 add-2.6.24-kernel-patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:09 +08:00
Mirko Vogt
e6bf784ae0 Revert "change default baudrate to 115200" 
This reverts commit 03acb399060bc7b9013f3776b8697915389b4592.
 2009-10-28 03:13:08 +08:00
Mirko Vogt
880ef14905 ext2 should be built-in to be able having it as rootfs 2009-10-28 03:13:08 +08:00
Mirko Vogt
38be4dace5 change default baudrate to 115200 2009-10-28 03:13:08 +08:00
Xiangfu Liu
151864b4ee [u-boot]remove-debug-option 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:08 +08:00
Xiangfu Liu
348808bd12 [2.6.25]change-the-seiral-number 2009-10-28 03:13:08 +08:00
Mirko Vogt
ef61859ea1 we don't need the squashfs-image for now but the tgz 2009-10-28 03:13:07 +08:00
Mirko Vogt
9c8f07ef4b adjust config - use the qi_lb60 by default 2009-10-28 03:13:07 +08:00
Mirko Vogt
29d473a66e add support for the qi_lb60 support (thanks to the work of Xiang Fu) -> LCM/LCD and MMC are supported and working 2009-10-28 03:13:07 +08:00
Mirko Vogt
a513356b50 config cleanup 2009-10-28 03:13:07 +08:00
Xiangfu Liu
3280839bf6 split-0002-patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:07 +08:00
Mirko Vogt
259dc7e01d switch to kernel 2.6.25.20 2009-10-28 03:13:07 +08:00
Mirko Vogt
3b9c82f0e7 add config for 2.6.25 based on config 2.6.24 - needs some more love... 2009-10-28 03:13:07 +08:00
Mirko Vogt
11a6cddfc4 add initial support for kernel 2.6.25 based on the kernel patch provided by ingenic for kernel 2.6.24.3 released 20090506 2009-10-28 03:13:06 +08:00
Mirko Vogt
eba0931c79 tell openwrt to build the uImage as we need it 2009-10-28 03:13:06 +08:00
Xiangfu Liu
e9d7920f31 update-kernel-config 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:06 +08:00
Xiangfu Liu
fcf89e95b2 add-JZ4720-to-QI_LB60.patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:06 +08:00
Xiangfu Liu
8b575df0de remove-pm_legacy-include 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:05 +08:00
Xiangfu Liu
6e396b6164 update-kernel-config 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:04 +08:00
Xiangfu Liu
a212074b0a fix-compile-MTD-driver-error 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:04 +08:00
Xiangfu Liu
da071d0251 create-uImage-for-kernel.patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:02 +08:00
Xiangfu Liu
6be1b61490 [U_BOOT]add-2GB-nand-support.patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:02 +08:00
Xiangfu Liu
6633201340 change-u-boot-to-download-from-git-and-small-patch.patch 2009-10-28 03:13:02 +08:00
Mirko Vogt
23a1cd927c set appropriate blocksizes for nand flash 2009-10-28 03:13:01 +08:00
Xiangfu Liu
0b6d49071a add jz_lcd jz_mmc support. 
now the kernel compile.
 2009-10-28 03:13:01 +08:00
Xiangfu Liu
c46aa046c3 fix the u-boot makefile 'dd' command 2009-10-28 03:13:01 +08:00
Florian Fainelli
6576d07d92 refresh 2.6.28 patches 
Signed-off-by: Florian Fainelli <florian@openwrt.org>
 2009-10-28 03:13:01 +08:00
Florian Fainelli
8fd96343b6 Prevent the mtd subsystem from generating linking failures against 64-bits divisions 
Signed-off-by: Florian Fainelli <florian@openwrt.org>
 2009-10-28 03:13:00 +08:00
xiangfu
b581a580c0 correct-the-u-boot-folder.patch 2009-10-28 03:13:00 +08:00
xiangfu
89d4c701da add-u-boot-to-Makefile.patch 2009-10-28 03:13:00 +08:00
xiangfu
5a7d04b885 add-u-boot.patch 2009-10-28 03:12:59 +08:00
Marek Lindner
73d02002b3 update kernel config (e.g. removing unsupported yaffs2) 2009-10-28 03:12:59 +08:00
Marek Lindner
a59fa712ba fix compile errors due to API changes 2009-10-28 03:12:59 +08:00
Marek Lindner
28779100a8 no need for a custom yaffs2 patch 2009-10-28 03:12:59 +08:00
Marek Lindner
bfbef6660a bring the sound driver to .28 2009-10-28 03:12:58 +08:00
Marek Lindner
6b50196c18 adding do_mounts.c 2009-10-28 03:12:58 +08:00
Marek Lindner
ec2eae6f7c moved includes to the new include dir /arch/mips/include/asm 2009-10-28 03:12:58 +08:00
Marek Lindner
2acb73e309 remove broken patch attempts from the patchset 2009-10-28 03:12:57 +08:00
Marek Lindner
59ac2dc808 remove unneeded ubifs patches 2009-10-28 03:12:57 +08:00
Marek Lindner
850f912291 upgrade driver patches 2009-10-28 03:12:57 +08:00
Marek Lindner
6fd5c78dcc remove 150-crypto.patch which is not needed for .28 as the kernel has lzo compression support 2009-10-28 03:12:55 +08:00
Marek Lindner
5b2fbd7f57 uplevel arch-patches to .28 2009-10-28 03:12:55 +08:00
Marek Lindner
91cc144708 adding xburst 2.6.28 patchset (based on the patchset from .24) 2009-10-28 03:12:55 +08:00
Marek Lindner
74212a8840 adding 2.6.28 kernel config 2009-10-28 03:12:54 +08:00
Marek Lindner
52a49afd21 [xburst] remove the dash from the filenames 2009-10-28 03:12:54 +08:00
Marek Lindner
7756d0b1fe inital architecture layout 
Signed-off-by: Florian Fainelli <florian@openwrt.org>
 2009-10-28 03:12:53 +08:00
florian
baa4f0f543 [kernel] add more missing configuration symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18185 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-27 15:12:25 +00:00
florian
a6cf611cc4 [ifxmips] remove the 2.6.28 specific Kernel/Prepare hack 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18184 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-27 14:01:53 +00:00
florian
8dae509e67 [rdc] resync kernel configuration, re-enable printk and make the kernel fit under 768KB 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18183 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-27 13:27:48 +00:00
kaloz
112987a5db upgrade iop32x to 2.6.30 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18182 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-27 12:51:03 +00:00
kaloz
9013a331ab sort kconfig symbols in generic configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18181 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-27 12:12:48 +00:00
kaloz
0919089785 add missing kconfig symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18180 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-27 12:09:35 +00:00
nbd
5fcd578239 ppc: add missing symbols for building with a newer toolchain 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18179 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-27 01:11:44 +00:00
juhosg
4497cf8437 ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to 'drivers/net/ramips_eth.h' 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18176 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:51 +00:00
juhosg
d9c2b6a237 ramips: use definitions from rt305x_regs, and nuke the duplicated ones 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18175 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:48 +00:00
juhosg
e1a6f94b64 ramips: move ramips_eth_platform_data into a separate file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18174 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:45 +00:00
juhosg
6e0afb85b9 ramips: request_irq prior to dma allocation, and handle the case if it fails 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18173 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:42 +00:00
juhosg
fae14fc50e ramips: add error handling to ramips_alloc_dma 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18172 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:39 +00:00
juhosg
8fee1ed8aa ramips: free allocated skbs in ramips_cleanup_dma 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18171 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:37 +00:00
juhosg
9f1a8f089c ramips: add ramips_setup_dma helper to the ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18170 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:34 +00:00
juhosg
1d4a083881 ramips: add ramips_cleanup_dma helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18169 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:29 +00:00
juhosg
7a797f4b8f ramips: remove unnecessary includes in the ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18168 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:26 +00:00
juhosg
a07eab49bf ramips: fix dma api usage in the ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18167 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:22 +00:00
juhosg
487693fb19 ramips: use resource to pass irq and base address to the ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18166 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:18 +00:00
juhosg
90e4aa2386 ramips: add error-path handling to the ramips_eth_plat_probe 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:13 +00:00
kaloz
8bea5a1f54 since we are using newer iptables version, we don't need this patch anymore 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18162 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 11:35:44 +00:00
kaloz
ca1329b26c rename some patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18161 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 10:15:52 +00:00
kaloz
38e85dcf7a prepare for the removal of squashfs 3.4: switch olpc to 2.6.30 (let's hope it works fine), and mark at91 broken 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18160 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 09:47:27 +00:00
florian
908e9268f9 [kernel] add missing configuration symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18157 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 21:26:46 +00:00
florian
6eaa4b75b1 [brcm63xx] remove 2.6.28 support, we never really used it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18156 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 21:13:46 +00:00
florian
cb097defcd [brcm63xx] switch to 2.6.30.9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18155 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 21:10:53 +00:00
blogic
f9adb76e53 [ramips] use gpio_led package rather than staticly linking it into the kernel 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18154 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 18:08:16 +00:00
blogic
59b7de5623 [ramips] fixes licenses 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18152 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 17:41:01 +00:00
blogic
fff402496f [ramips] select CONFIG_LEDS_GPIO per default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18151 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 17:06:01 +00:00
blogic
4c7c2a504c [ramips] clean up dma api of ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18150 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 16:58:00 +00:00
blogic
6c7f40ae71 [ramips] fixes dma bug in eth driver, that was caused under high net load. the dma ring was not initialized on time 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18149 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 14:34:55 +00:00
juhosg
f4feacd7f3 ramips: nuke net_device stats from the private data of the ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18147 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 09:37:30 +00:00
juhosg
5305a949f4 ramips: remove unnecessary type-castings in the ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18146 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 09:37:27 +00:00
juhosg
5c1de285e2 ramips: change debug message levels, and add missing LFs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18145 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 09:37:24 +00:00
juhosg
5244481045 ramips: make ethernet fuctions static 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18144 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 09:37:21 +00:00
juhosg
00b47a7a92 ramips: register ethernet device on the DIR-300 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18143 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 09:37:17 +00:00
juhosg
50ea4bdcbd ramips: change prom code to accept 'board=FOOBAR' from the command line 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18142 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 07:10:16 +00:00
juhosg
c26fdeeec1 ramips: modify {read,write}_config helpers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18141 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 07:10:14 +00:00
juhosg
e9aa516720 ramips: nuke config_access helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18140 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 07:10:11 +00:00
blogic
15585654b9 [ramips] fixes dma hangups in eth 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18139 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-25 00:11:08 +00:00
blogic
8e873b21e8 [ramips] select fon20n mach 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18137 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-24 23:08:06 +00:00
blogic
c75080b25f [ramips] make ethernet a platform device 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18135 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-24 20:58:41 +00:00