qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-16 23:32:27 +02:00
Code
24,422 Commits 13 Branches 0 Tags 117 MiB
a485afe4d4
Commit Graph

9592 Commits

Author SHA1 Message Date
blogic
cea2b4210d [lantiq] cleanup patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32953 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-03 08:53:02 +00:00
florian
6b899d5dea [mcs814x] nuport-mac: properly protect the phy interrupt handler 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32951 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 18:13:17 +00:00
blogic
ab27b3f74d [bufferbloat] Codel: avoid a nul rec_inv_sqrt 
One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.

codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.

Brought over from 3.5-stable

Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32950 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 13:39:50 +00:00
blogic
e38a6c3f37 [lantiq] fixes i2c clock enable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32949 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 13:29:49 +00:00
juhosg
1c54e0a078 ar71xx: simplify misc IRQ handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32948 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 11:25:49 +00:00
juhosg
93af4ef46f ar71xx: fix AR934X_EHCI_SIZE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32947 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 11:25:46 +00:00
juhosg
7750261206 ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32946 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 09:54:41 +00:00
juhosg
70b3c1262b ar71xx: image: allow to use board specific code in the lzma-loader 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32945 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 09:54:33 +00:00
juhosg
58aa6ee58f ar71xx: init switch hw_reset on the TL-WR1043ND board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32944 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 09:54:28 +00:00
juhosg
08700f9817 generic: rtl836x: add hw_reset field to struct rtl8366_smi 
It will be used to start/stop the switch if that is
supported by the given board.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32943 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 09:54:21 +00:00
juhosg
7f000ed40c generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32942 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 09:54:13 +00:00
florian
0a53c615c8 [mcs814x] add missing netmask to the network config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32941 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 22:09:13 +00:00
florian
de000e9b36 [mcs814x] assume the link is up and full-duplex by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32940 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 21:56:54 +00:00
florian
9a9ced9072 [mcs814x] add a default and suitable network config file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32939 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 21:56:49 +00:00
juhosg
62dfbdafd5 ar71xx: ew-dorin: added router firmware generation 
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32934 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 12:24:57 +00:00
juhosg
1701067509 ar71xx: ew-dorin: added USB support 
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32933 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 12:24:56 +00:00
juhosg
48872cf839 ar71xx: Buffalo WLAE-AG300N wireless led patch 
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32932 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 12:24:54 +00:00
juhosg
b80a2c45e4 ar71xx: Buffalo WLAE-AG300N initial support 
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32931 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 12:24:52 +00:00
florian
bd34f5017a [mcs814x] resync defconfig enable XZ compression 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32930 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 12:01:27 +00:00
florian
c48bcd5433 [mcs814x] properly generate squashfs, jffs2 and initramfs images and kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32927 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-31 23:09:50 +00:00
florian
37b335aace [kernel] disable crashlog on ARM platforms for the moment 
It is currently badly broken on ARM, until fixed, disable it

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32926 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-31 23:09:46 +00:00
blogic
0d1207bd0b [lantiq] add lantiq svip support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32925 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-31 18:49:54 +00:00
jogo
a07db05063 bcm63xx: Add nb6 support (BCM6362 SoC base boards) 
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32924 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-31 14:27:47 +00:00
jogo
43ec5beeff bcm63xx: add basic bcm6362 support 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32923 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-31 14:27:42 +00:00
jogo
5292fd0ba0 bcm63xx: enable usb for bcm6328 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-31 14:27:34 +00:00
jogo
971ed3b67d bcm63xx: update enetswitch driver 
Update enetswith driver with latest fixes and additions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32921 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-31 14:27:31 +00:00
jogo
f0fe32e09a bcm63xx: reorder patches 
Fix the order and names of patches.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32920 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-31 14:27:25 +00:00
florian
4d018c5938 [at91] move i2c module to target modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32910 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-29 13:20:51 +00:00
florian
cd3ef0bd78 [omap24xx] resync config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32908 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-29 13:20:39 +00:00
florian
56f8227537 [omap24xx] use the same description as other omap platforms (without the dash) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32907 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-29 13:20:35 +00:00
blogic
8be6a993ea [kernel] refresh pwm patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32905 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-29 11:53:06 +00:00
blogic
12c804da28 [kernel] clean up pwm patches and drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32901 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-28 20:47:08 +00:00
hauke
6771089f01 [kernel] add config option CONFIG_I2C_MV64XXX to fix kirkwood build 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32898 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-28 11:36:52 +00:00
florian
e5d6243baa [realview] resync config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32895 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-27 15:35:15 +00:00
florian
afc4f76011 [brcm63xx] fix DVA-G3810BN image generation 
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32894 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-27 15:35:12 +00:00
florian
5f0ec9d349 [brcm63xx] add D-link DVA-G3810BN-TL-1 support 
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32893 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-27 15:35:09 +00:00
florian
55bad547db [brcm63xx] Add CT6376-1 board support 
Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32892 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-27 15:35:05 +00:00
florian
14e3269c19 [brcm63xx] Add brcmsmac profile 
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32890 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-27 15:34:57 +00:00
blogic
0f80302310 [atheros] Add leds back after migration to sysfs 
atheros trunk moved to full sysfs gpiolib, but the leds were forgotten.
This restores the wlan led that was missing after switching from backfire
to trunk.

Signed-off-by: Karl Palsson <karlp@remake.is>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32885 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-26 17:06:55 +00:00
florian
72d6153213 [brcm2708] add more missing config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32884 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-26 17:03:08 +00:00
florian
0b6c36ebc1 [generic] add more USB-related config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32883 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-26 17:03:05 +00:00
florian
bbd4a26da8 [ep93xx] make sure target modules depend on the target 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32882 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-26 17:03:02 +00:00
hauke
cf6ccf73a0 [kernel] bcma: update to version from wireless-testing tag master-2012-07-16 
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.

This also contains 3 additional patches fixing some bugs in bcma.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32880 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-26 15:42:18 +00:00
blogic
d6ccc66511 [ar71xx] fix typo in modules.mk 
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32870 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 19:52:30 +00:00
florian
bc858807dc [package] make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32869 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 19:36:19 +00:00
florian
670865f323 [ppc40x] move isp116x driver to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32865 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:45 +00:00
florian
ba7b4e1df0 [ramips] move rt305x-dwc driver to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32864 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:42 +00:00
florian
c68ad0c25b [brcm47xx] move ubsec-ssb driver to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32863 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:38 +00:00
florian
65f5ea534e [brcm47xx] move ssb-gige to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32862 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:36 +00:00
florian
ebd067e1dc [brcm47xx] move usb driver to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32861 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:33 +00:00
florian
c9e5284b5a [avr32] move mmc driver to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32859 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:26 +00:00
florian
ef5f804159 [ixp4xx] move ixp4xx-eth to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32858 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:23 +00:00
florian
c4d4dc6faf [ixp4xx] move crypto module to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32856 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:16 +00:00
florian
1bf0057f4d [octeon] move i2c driver to target modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32855 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:13 +00:00
florian
af1bbb3c56 [ar71xx] move watchdog driver to target specific modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32854 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:10 +00:00
florian
fb9582f0c9 [ar71xx] move target specific spi modules 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32853 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:04 +00:00
florian
c170356e03 [ar71xx] move target specific leds modules to ar71xx modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32852 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:50:02 +00:00
florian
03eb275e12 [x86] move leds modules back to target modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:49:57 +00:00
florian
c6fde74a29 [x86] move i2c modules back to target modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:49:54 +00:00
florian
e04ea40569 [x86] move more x86-specific modules back to target modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:49:49 +00:00
florian
aced68717a [x86] move x86 specific ide/pata modules to x86' modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32846 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 15:49:42 +00:00
hauke
bf02882bea brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32845 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 14:52:00 +00:00
florian
fb6f391168 [kernel] add yet another framebuffer symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 14:01:57 +00:00
florian
cdd132c493 [package] split framebuffer helper modules to their own packages 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 14:01:54 +00:00
florian
b32c8c7dca [cobalt] remove broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32842 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 14:01:51 +00:00
florian
98e84715a2 [cobalt] package buttons driver separately 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32841 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 14:01:49 +00:00
florian
e0f70e20ca [cobalt] package cobalt lcd as a module 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32840 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 14:01:46 +00:00
blogic
2cf0953394 [kernel] add unset CONFIG_FB_XGI to fix fullbuilds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32836 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 09:05:23 +00:00
blogic
570c000d84 [brcm2708] cleanup config-3.3, remove =m 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32835 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 09:05:18 +00:00
blogic
c3e2030356 [cns3xx] laguna: fix eeprom read buffer size during platform configuration 
Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna.  The model name read in is 16 bytes but the original buffer was only 8 bytes.

Signed-off-by: David Acker <dacker@rajant.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32833 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-25 08:01:38 +00:00
blogic
1df0438a5e [brcm2708] adds target used by rapsberry pi 
Add support for Raspberry Pi / brcm2708 / 2835

Signed-off-by: Ian Ridge <ianridge [at] gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32825 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 20:39:17 +00:00
blogic
3d574b6ebb [ramips] DWC otg usb: compilation fixes and trivial bugfix in slave mode 
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32823 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 20:38:55 +00:00
blogic
1866d6283c [ramips] D-Link DAP-1350 initial support 
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32821 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 20:38:43 +00:00
blogic
a1375cfa56 [ixp4xx] MI424WR - add rev D support 
Add support for revision D of the MI424WR.
Rev D swaps LAN & WAN ports so this patch maintains
eth0 for LAN and eth1 for WAN. For details on rev D usage,
see http://wiki.openwrt.org/toh/actiontec/mi424wr

Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32820 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 20:38:36 +00:00
blogic
9722273ea2 [ramips] initial LED configuration for Fonera 2.0n 
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32819 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 20:38:31 +00:00
blogic
a976d555c3 [ramips] add ALL5002 userspace support 
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32816 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 20:38:14 +00:00
blogic
3b24a99dd1 [ramips] enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F. 
Hope that this works, didn't have a chance to actually test it...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32815 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 20:38:08 +00:00
blogic
27d44b9c6b [ramips] add image build for ALL5002 
add image build for ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32814 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 20:38:03 +00:00
blogic
03019d7d12 [ramips] add support for Allnet ALL5002 to kernel 
support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32813 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 20:37:56 +00:00
blogic
ea6e386f6f [ramips] uart_clk on Rt3352F is always 40MHz 
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32812 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 20:37:50 +00:00
florian
cbc6bff128 [omap24xx] move omap specific modules to modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32810 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 19:43:54 +00:00
florian
5e60f09ad9 [omap24x] move n810 battery module to omap24 modules.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32809 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 19:43:49 +00:00
florian
6852680f2d [omap24x] move target specific modules to target's module.mk 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32808 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 19:43:45 +00:00
florian
6c435d6654 [ep93xx] package ep93xx framebuffer 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32807 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 19:43:35 +00:00
florian
caefa9cc68 [ep93xx] remove crypto symbols override 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32806 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 19:43:31 +00:00
florian
a25a089fa9 [generic] add missing framebuffer related symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32804 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 19:43:23 +00:00
florian
859c16db86 [ep93xx] remove broken flag, since it works 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 19:43:19 +00:00
florian
9004dc02b3 [ep93xx] fix sound modules loading order and dependencies 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32802 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 19:43:15 +00:00
florian
a1975f4fba [ep93xx] package ep93xx touchscreen driver as a module 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32799 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 19:42:49 +00:00
florian
68e08c6d5a [ep93xx] set DEVICE_TYPE to developerboard 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32798 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 19:42:44 +00:00
blogic
2b6253ef5b [lantiq] rebase config-3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32797 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 17:28:25 +00:00
blogic
432fa085bd [generic] fix tantos patch properly 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32796 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 17:28:12 +00:00
blogic
ee6570a017 [generic] make tantos switch select ETHERNET_PACKET_MANGLE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32795 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 16:50:14 +00:00
blogic
30326d761c [lantiq] move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file 
This broke falcon builds

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32794 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-24 15:33:01 +00:00
nbd
bd4fb35eed [kernel] crashlog: fix dependency, add memblock support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32787 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-22 16:39:33 +00:00
nbd
02d161708f kernel: fix portability issues on the x86 specific relocs host tool, fixes build on mac os x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32783 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-20 12:28:50 +00:00
florian
a931e49ccc [au1000] rename upgrade image to sysupgrade.bin for consistency 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32770 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-17 16:47:57 +00:00
florian
e0f76c4f22 [au1000] add missing configuration symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32769 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-17 16:40:28 +00:00
florian
65e3a4bb3b au1000: implement sysupgrade platform.sh 
Signed-off-by: Bruno Randolf <br1@einfach.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32768 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-17 16:40:24 +00:00
florian
98743f8444 au1000: clean up profiles 
Signed-off-by: Bruno Randolf <br1@einfach.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32767 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-17 16:39:52 +00:00
florian
4d65fe14a5 au1000: fix InternetBox idsel and remove broken flag 
The following patch is necessary for the InternetBox (Surfbox) board-specific
idsel to work with newer kernels. Acutally I don't exactly understand why this
was not necessary before, but without the udelay, the MiniPCI adapter in slot 3
is not detected and set up correctly.

Also remove platform broken flag, it works.

Signed-off-by: Bruno Randolf <br1@einfach.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32766 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-17 16:39:47 +00:00
juhosg
1344fb0d96 ar71xx: enable I2C_GPIO, the PB44 board needs that 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32738 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-15 17:52:52 +00:00
juhosg
ec183b0044 ar71xx: fix PB44 board detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32737 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-15 17:52:50 +00:00
juhosg
dfcccc252d ar71xx: use gpio_set_value_cansleep on sleeping GPIOs in ath79_spi 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32736 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-15 17:52:48 +00:00
luka
1e55d88303 kernel: add Marvell SoC built-in RTC to modules 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32732 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-15 14:25:30 +00:00
florian
bf2c3d0b49 [mcs814x] set DEVICE_TYPE to other to avoid pulling unecessary packages 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32731 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-15 14:10:03 +00:00
florian
5ecd917028 [mcs814x] add compatible property to pci node 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32730 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-15 14:09:40 +00:00
florian
cf67c71c56 [mcs814x] use ohci_err() instead of err() 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32729 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-15 14:09:32 +00:00
florian
a79b37bfe8 [mcs814x] make sure we properly unmap DMA mappings we created 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32728 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-15 14:09:24 +00:00
florian
c2e42c1d07 [mcs814x] nuport-mac: add definitions of the various bits/masks used 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32727 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-15 14:09:18 +00:00
luka
7c32e6aaaf kirkwood: add support for seagate goflexnet and goflexhome 
Signed-off-by: Martin Mueller <mm@sig21.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32725 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-15 12:18:29 +00:00
luka
4f9a99a732 kirkwood: revert config changes from r32053 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32719 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-15 00:08:52 +00:00
juhosg
9c4d41a426 ar71xx: build firmware image for the TP-Link TL-WDR4310 v1.0 
The hardware for TP-Link TL-WDR4300 v1.1 and TL-WDR4310 v1.0 is
identical, but requires different firmware headers:

TL-WDR4300:
00000040  43 00 00 01 00 00 00 01  00 00 00 00 76 fb 83 40  |C...........v..@|

TL-WDR4310:
00000040  43 10 00 01 00 00 00 01  00 00 00 00 38 2b 50 6c  |C...........8+Pl|

[juhosg: change commit message, use a different model name]

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32683 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-12 13:38:40 +00:00
juhosg
533fe2fa9f ramips: rt305x: add support for Edimax 3G-6200N 
Support for Edimax 3G-6200N router with USB.

Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32682 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-12 13:29:46 +00:00
juhosg
7f1dc18d4b generic: ocf: restore terminating entry of pci_id_table in hifnHIPP 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32680 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-12 08:34:23 +00:00
juhosg
ba4d4f1cda ar71xx: select ATH79_DEV_M25P80 for the WRT400N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32679 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-12 08:34:22 +00:00
juhosg
8eb3c9a3fa ar71xx: airrouter power led support 
This patch adds support for power led to Unifi Airrouter AP.

[juhosg:fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32678 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-12 08:34:21 +00:00
juhosg
10f263351f ar71xx: unifi reset button support 
This patch adds support for reset button to Ubiquiti UniFi AP.

[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32677 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-12 08:34:20 +00:00
juhosg
e97a615b45 ar71xx: airrouter reset button support 
This patch adds support for reset button to Ubiquiti Airrouter AP.

[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32676 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-12 08:34:18 +00:00
luka
94a17b96c4 ocf: update to version 20120127 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32672 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-11 23:38:14 +00:00
hauke
5e3f966711 kernel: bcma: update to version from wireless-testing tag master-2012-07-11 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32670 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-11 22:17:05 +00:00
florian
52d62d0be8 [brcm63xx] remove bcm63xx_pci_register() call in livebox board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32661 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-11 09:15:26 +00:00
florian
e070410e7a [brcm63xx] use physmap-flash on livebox (#8677) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32660 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-11 09:15:22 +00:00
florian
261b7b2d42 [mcs814x] nuport-mac: check netif_receive_skb() return value 
We did not reassign status to netif_receive_skb() return value, we thus
almost always incremented the dropped counter because the descriptor status
value never matches the NET_RX_DROP.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32659 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-11 08:29:01 +00:00
florian
0c7b89359f [mcs814x] fix typo on of_node_put() 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32653 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-09 14:44:15 +00:00
florian
eb9c638ec8 [brcm63xx] Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board) 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32643 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-06 22:10:37 +00:00
juhosg
fffc489ef4 ar71xx: swizzle address for PCI byte/word access on AR71xx 
Closes #11683.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32639 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-06 16:33:12 +00:00
juhosg
311f21e096 ar71xx: select SOC_AR933X and ATH79_DEV_WMAC for the OM2P board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32638 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-06 11:12:02 +00:00
juhosg
d675d7bc7d ar71xx: merge new board patches into the generic patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32637 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-06 11:12:01 +00:00
juhosg
0e503f85bf ar71xx: OM2P LC sysupgrade patch 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32635 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-06 11:11:58 +00:00
florian
af91801f83 [mcs814x] call of_node_put() on ethernet node 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32628 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 18:46:55 +00:00
florian
fa5a8f6863 [mcs814x] fix EPHY clock bit definition after r32489 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32627 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 18:46:52 +00:00
florian
c5bc9b0989 [mcs814x] give an unique partition identifier for dLAN USB Extender Combined partition 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 18:46:48 +00:00
juhosg
cc8ef03faa ar71xx: set firmware version for the TL-WR2543N 
This ensures that the resulting firmware can
be flashed from the latest (v3.13.17) offical
firmware.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32617 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 16:25:31 +00:00
juhosg
fd349e4b0c ar71xx: make 2.4GHz wlan LED work on the WR2543N 
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32615 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 16:25:26 +00:00
juhosg
11532f0779 ar71xx: OM2P sysupgrade support 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32613 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:57 +00:00
juhosg
0d85e0278f ar71xx: add support for the OpenMesh OM2P-LC board 
Patch-by: Marek Linder <marek@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32611 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:53 +00:00
juhosg
dd71ce4e82 ar71xx: add profile and build image for the Atheros AP136 reference board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32609 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:51 +00:00
juhosg
e03def9379 ar71xx: AP136 user-space support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32608 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:50 +00:00
juhosg
ee6173e7dc ar71xx: add initial support for the Qualcomm Atheros AP136 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32607 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:48 +00:00
juhosg
74d33b7b96 ar71xx: add initial support for the QCA955X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32606 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:47 +00:00
juhosg
97e6f60806 ar71xx: refactor PCI code to allow registering multiple PCI controllers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32605 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:45 +00:00
juhosg
671f0e3971 generic: ar8216: start aneg on each PHY of the AR8327 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32604 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:39 +00:00
florian
c9906b31cd [mcs814x] add missing interrupts properties to some device nodes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32603 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-04 19:37:11 +00:00
nbd
08a9c557e0 ar71xx: update the EW Dorin MTD layout, increase kernel partition size (requested by EW) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32599 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-04 10:55:56 +00:00
jogo
c94a6d0b71 bcm63xx: bcm63xx-spi does not depend on spi-bitbang 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32594 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:17 +00:00
jogo
4f860c88aa bcm63xx: 96348A-122 improvements (Comtrend 5365) 
1) Improve WLAN button.
2) Add 96348A-122 image.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:15 +00:00
jogo
c60cd5dd54 bcm63xx: fix second caldata address calculation 
thanks Noltari for spotting this.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32592 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:12 +00:00
jogo
cc1b8fb1cb bcm63xx: update patches to latest upstream versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32591 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:07 +00:00
jogo
5a8d0fdaf3 kernel: generic: spi: allow empty (un)prepare transfer 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32590 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:03 +00:00
juhosg
641595b79a ar71xx: improve MDIO busy wait code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32586 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 15:24:02 +00:00
juhosg
db1a0d339e ar71xx: remove the built-in MTD map of the ALL0258N 
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32585 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 15:24:01 +00:00
florian
0ef855fc75 [brcm63xx] refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32581 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 09:45:46 +00:00
hauke
bdc39c62ca kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32580 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-02 23:12:58 +00:00
florian
a2ed4b34a3 [brcm63xx] fix watchdog and rng drivers section mismatch (#11767) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-29 09:07:54 +00:00
nbd
7ffed0b52c ar71xx: detect and enable MIPS DSP extensions, AR9344 supports them (fixes #11762) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32520 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-28 16:05:08 +00:00
nbd
b6422914a3 kernel: switch openwrt default to TCP cubic from westwood (patch by Dave Täht) 
Despite Westwood's theoretical advantages, in nearly
every benchmark we ran last year, TCP cubic won, whether it be
on correct RTT estimates, amount of buffering, responsiveness,
etc. on current hardware and software designs.

(both need timestamps on to work well, besides)

TCP cubic is better maintained and understood than westwood,
also.

While a scenario where westwood would win possibly exists,
there is too much buffering in the wifi stack in particular
at present, to see any improvement.

If you wish to exercise various TCPs under contention,
the current svn head of netperf (2.6) has options to switch
congestion control agorithms on the fly, as does iperf.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-27 22:32:47 +00:00
florian
a6f7f0aaf2 [brcm63xx] fix SPI clock frequency selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32512 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-27 22:14:50 +00:00
nbd
ced5f69d4d kernel: add missing config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32498 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-24 20:21:27 +00:00
acinonyx
99a635edd1 ramips: mac address detection for Fonera 2.0n 
Detect and apply MAC address of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32490 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-23 13:58:29 +00:00
florian
27abc2e19f [mcs814x] provide an early ioremap cookie of the system configuration register 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32489 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-23 11:03:50 +00:00
florian
a699bb193a [mcs814x] group SYSDBG register defines in mcs814x.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32488 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-23 11:03:45 +00:00
florian
01532c0031 [mcs814x] make hardware.h a forward inclusion of mcs814x.h 
mach/hardware.h is soon to be removed by upstream kernel

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32487 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-23 11:03:40 +00:00
florian
4c31778fc4 [mcs814x] remove platform specific initialization from ethernet driver 
Hardware filtering must always be enabled as long as there is an Ethernet
device registered, and use device tree for setting the link activity and
buffer shifting enable/disable bit.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-23 11:03:35 +00:00
florian
bc89518781 [mcs814x] regroup interrupt controller register definitions in hardware.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32485 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-23 11:03:29 +00:00
florian
0235660f48 [mcs814x] remove handle_irq callback in board-mcs8140-dt.c 
This should have been removed in r32470.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32481 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-21 12:20:47 +00:00
florian
b6eacc06d6 [mcs814x] fix USB led triggers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32474 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-20 21:58:00 +00:00
florian
2af5a044d3 [mcs814x] use generic uci defaults functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32473 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-20 21:57:56 +00:00
florian
aa77c3e868 [mcs814x] remove uselss cache invalidations 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32472 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-20 21:57:53 +00:00
florian
ee556c7f7b [mcs814x] improve ethernet driver debugging 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32471 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-20 21:57:49 +00:00
florian
3a5b7c7629 [mcs814x] do not use MULTI_IRQ_HANDLER it is bogus on our platform 
This caused stalls in the Ethernet DMA block, so until properly
written and sorted out, fallback to the assembly version instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32470 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-20 21:57:45 +00:00
mirko
85bb2ebefa [target/xburst] verified to work - remove broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32469 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-20 19:04:35 +00:00
acinonyx
9ebe427897 [x86] Fix sysupgrade for squashfs, jffs2 and ext4 images 
* use 'fsync' with 'dd' for image writing
	* save config to boot partition

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32465 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 22:36:53 +00:00
florian
7c90f3b2b4 [mcs814x] add Moschip MSC814x support 
This target currently only supports Moschip's MCS8140 SoC, but support
for other chips in the same family (MCS8142, MCS8144) will be easy to add.

Target support is entirely using Device Tree for probing peripherals.
Drivers support include:
- PCI
- USB 1 & 2
- watchdog
- random number generator
- UART
- timer
- internal Ethernet PHY
- Ethernet MAC core

Support for the following boards is included using Device Tree
- Devolo dLAN USB Extender
- Tigal RBT-832

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32462 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 14:48:56 +00:00
juhosg
5fa7ed291e ar71xx: create profile and build image for the TL-WDR4300 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32461 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 11:51:20 +00:00
juhosg
977ff3326d ar71xx: add user space support for the TL-WDR4300 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32460 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 11:51:18 +00:00
juhosg
ae6a363859 ar71xx: add support for the TL-WDR4300 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32459 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 11:51:17 +00:00
juhosg
31f53133c7 ar71xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 11:51:15 +00:00
juhosg
279cc5d283 ar71xx: make AR8327 LEDs working on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32457 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:44:17 +00:00
juhosg
7066d5e4ae generic: ar8216: allow to configure AR8327 LEDs via platform data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32456 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:44:16 +00:00
juhosg
d02eb8cdaa ar71xx: remove superfluous include of asm/mach-ath79/pci.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32455 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:13:43 +00:00
juhosg
9e32544f7a ar71xx: add a common function to configure USB power GPIOs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:13:41 +00:00
juhosg
60f2c64e65 ar71xx: correctly detect NETGEAR WNDRMAC 
This patch helps properly detect a WNDRMAC device. Before this
patch the model is detected as "NETGEAR ?????????N".

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32453 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:13:38 +00:00
juhosg
f054b259d0 ar71xx: add USB LED support by default for WNDR3700/WNDR3800/WNDRMAC 
This adds kmod-leds-wndr3700-usb package to a default build for
WNDR3700, WNDR3800 and WNDRMAC in order to support the green USB LED.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32452 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:13:37 +00:00
juhosg
71c704387b ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router 
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w

Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 09:52:15 +00:00
nbd
669a7a0710 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 00:22:04 +00:00
nbd
bd85fd265b ar71xx: add support for reading the MAC address from OTP ROM on AR933x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 00:21:58 +00:00
jow
4e6e9c9c59 optimize kernel config for kvm_guest 
This patch enables few extra kernel options for the kvm_guest subtarget:
- Tickless kernel to avoid timer ticks in idle guests, reduces CPU usage
- Enable paravirtualization steal time support

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32436 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-18 23:36:50 +00:00
jow
03f2b4f961 [kvm_guest] remove inittab override 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32422 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-18 11:50:37 +00:00
florian
4666e9b56d [brcm63xx] fix SPI message control handling for BCM6338/6348 
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32409 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-17 16:17:29 +00:00
nbd
50d5344375 kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets 
The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32395 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-16 21:06:33 +00:00
florian
07bc7f5147 [rdc] remove broken flags 
Thanks to Nicolas Le Falher for testing on Bifferboard.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32389 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-16 16:45:28 +00:00
jow
f1d9712dc3 [x86] use ttyS0 @ 115200 baud as default for KVM guests 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32384 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-15 12:59:49 +00:00
luka
69934f5a34 kirkwood: fix typo in uci-defaults/leds 
Signed-off-by: Martin Mueller <mm@sig21.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32343 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-13 18:41:42 +00:00
nbd
2d3cf7a902 ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32336 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-13 12:54:22 +00:00
jogo
d8ff69c0da bcm63xx: readd accidentially dropped ignore_oc in ehci driver 
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32221 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-11 22:24:58 +00:00
luka
5a35428cb3 kirkwood: ib62x0 fix reboot 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32131 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-08 23:17:46 +00:00
nbd
cc530eb3af xburst: remove an obsolete CompareKernelPatchVer call 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32115 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-07 16:32:44 +00:00
florian
816d0cbd39 [brcm63xx] fix 553-board_96348w3.patch patch wrt gpio-keys-polled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32096 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 20:58:45 +00:00
nbd
c437387d32 ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32095 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 19:37:49 +00:00
nbd
b899b1d3a5 kernel: add a few more tracing related symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32094 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 18:04:00 +00:00
nbd
eed1fe974e ar71xx: fix PHY setup on TL-MR3020 (fixes #11572) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32093 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 17:24:12 +00:00
nbd
62977660d8 ar71xx: add a helper function for setting up PHY4 swapping on ar933x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32092 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 17:24:09 +00:00
nbd
7ea20fba6a ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32090 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 17:24:01 +00:00
florian
d19ba29311 [brcm63xx] fix alarm led color for board 96348A-122 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32089 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 16:07:46 +00:00
florian
0e5685072e [brcm63xx] add 96348w3 board (#10764) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32088 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:45:04 +00:00
florian
84fcf0bb00 [brcm63xx] update livebox board support (#8677) 
Merge most fixes from #8677:

- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses

Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32087 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:44:56 +00:00
florian
adfadea95e [brcm63xx] fix leds naming for all bcm63xx boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32086 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:44:52 +00:00
nbd
32b9ee0930 kernel: make tracing support configurable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32085 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:25:57 +00:00
florian
3d0fed711e [brcm63xx] backport upstream spi-bcm63xx fixes 
* message pump conversion
* not using stopping state
* setting spi driver mode bits

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32078 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 13:31:33 +00:00
florian
28f01f0d91 [generic/3.3] backport spi message queue infrastructure 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32077 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 13:31:30 +00:00
florian
a7a19483fb [brcm63xx] increase led number in patch 301-led_count.patch 
So that board patches are only touching board-related code

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32076 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 13:31:24 +00:00
blogic
9216dfc76c [lantiq] clean up generic image building 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32065 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 17:49:42 +00:00
florian
6255930f93 [brcm63xx] fix board patches so that new boards are withing appropriate ifdef 
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32060 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 13:40:41 +00:00
florian
c7d60bd0db [kernel/3.3] refresh generic patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32059 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 13:40:38 +00:00
florian
a6691cb6b1 [brcm63xx] fix bisectability of patch 303-spi-board-info.patch 
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32058 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 13:40:35 +00:00
blogic
466d98bf88 [kernel] bump to 3.3.8 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32055 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 06:57:51 +00:00
luka
576ea25936 kirkwood: reorganize target 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32053 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 00:43:56 +00:00
luka
090fe17a5f uboot-envtools: update to 2012.04.01 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32051 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-04 21:55:49 +00:00
jogo
43bdeca579 bcm63xx: fix ethernet on 96328avng and 963281TAN 
The internal switch did not get registered.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32041 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-04 08:35:25 +00:00
blogic
35d604e713 [lantiq] adds unset Kbuild symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32026 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-02 14:03:32 +00:00
juhosg
f6bfa9b749 malta: remove 3.2 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32023 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-02 12:06:28 +00:00
juhosg
8f3ef842f5 malta: use common kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32022 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-02 12:06:26 +00:00
juhosg
e17a638412 xburst: add missing config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32021 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-02 12:06:15 +00:00
blogic
b9f376d33a [kernel] adds patch to make Tantos (psb6970) switch buildable again 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32006 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-30 17:41:28 +00:00
jogo
f91824b22d bcm63xx: build images for 6328 reference boards with various flash sizes 
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.

Known issues:
 * Button setup unknown, thus no fail-safe available.
 * All other BCM6328 and BCM63XX issues

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32004 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-30 10:27:46 +00:00
jogo
99b853b6b3 bcm63xx: readd accidentially dropped network config for SPW303V 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32003 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-30 10:27:42 +00:00
juhosg
7cab23d0dc generic: ar8216: add revision specific PHY fixups for AR8327 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32000 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:27 +00:00
juhosg
72df0a7c48 generic: ar8216: replace chip_type field with chip_{ver,rev} in ar8216_priv 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31999 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:26 +00:00
juhosg
6d10d89b29 generic: ar8216: add chip_is_ar8{216,236,316,327} helpers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31998 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:24 +00:00
juhosg
3ffc68003f ar71xx: add default LED setup for the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31997 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:23 +00:00
juhosg
ab5576542a cns21xx: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31996 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:22 +00:00
juhosg
014e1ffa51 lantiq: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31995 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:21 +00:00
juhosg
09f48c381b kirkwood: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31994 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:20 +00:00
juhosg
93945c8815 ramips: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31993 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:18 +00:00
juhosg
22ae6b82eb ar71xx: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31992 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:17 +00:00
juhosg
3a3aa7378b kirkwood: use uci-defaults to configure different boards 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31990 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:15 +00:00
juhosg
436c9f6d34 ramips: WAN LED for D-Link DIR-300-B1 
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31989 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:03 +00:00
nbd
8c1c75ba17 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 20:39:50 +00:00
nbd
0f299fab07 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31934 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 02:55:59 +00:00
nbd
dfea949949 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31925 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 21:02:41 +00:00
nbd
295c63c334 kernel: fix suppressing -s for linking modules when profiling is enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31924 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 21:02:36 +00:00
juhosg
d3fa7efc8c ar71xx: fix TL-WR1041 image size 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31923 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:21:47 +00:00
juhosg
75c71fcaa0 ramips: rt3883: add device registration code for the SPI controller 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:10:00 +00:00
juhosg
84b342399c ramips: allow to use the SPI driver on RT3662/RT3883 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31921 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:58 +00:00
juhosg
1e3e199faa ramips: rt3883: fix GPIO reservation for the SPI pins 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31920 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:56 +00:00
juhosg
0c9cb51fbb ramips: rt305x: remove superfluous controller_data assignment 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31919 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:52 +00:00
juhosg
ce2fd1dbc9 ramips: make rt2x00 firmware extraction quiet 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31918 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:50 +00:00
juhosg
39068e8b25 generic: rtl8367: rename a misnamed variable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31917 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:47 +00:00
juhosg
11d6be39a6 generic: rtl8366_smi: remove duplicated spinlock initialization 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31916 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:45 +00:00