Werner Almesberger
|
761eae16bd
|
labsw/: added hardware revision indication
|
2011-09-10 20:42:00 -03:00 |
|
Werner Almesberger
|
bdaff51ad3
|
labsw/: added low-pass filters to button input (with help from Joerg Reisenweber)
|
2011-09-10 20:35:23 -03:00 |
|
Werner Almesberger
|
6190dbe261
|
labsw/ changed internal pull-ups to external to remove sneak current path
|
2011-09-10 20:23:59 -03:00 |
|
Werner Almesberger
|
5d32ade1e5
|
labsw/: power bypassing is now the way SiLabs recommend
|
2011-09-10 20:00:05 -03:00 |
|
Werner Almesberger
|
2310466805
|
m1rc3/norruption/: update of on-going testing; new test loop7 simulating "false start"
|
2011-09-10 16:33:18 -03:00 |
|
Werner Almesberger
|
db7ae94e64
|
m1rc3/norruption/: loop5 test: cut power while in standby
|
2011-09-09 11:07:06 -03:00 |
|
Werner Almesberger
|
2e3553d458
|
m1rc3/norruption/LOG: NOR corruption not observed without power-cycling
|
2011-09-08 20:06:58 -03:00 |
|
Werner Almesberger
|
47f13281fe
|
m1/jtag-boot/mkboot: eradicate traces of time travel (reported by Michael Walle)
|
2011-09-08 19:07:55 -03:00 |
|
Werner Almesberger
|
852210cdfa
|
m1rc3/norruption/: next round of tests, just resetting without power-cycling
|
2011-09-08 19:07:18 -03:00 |
|
Werner Almesberger
|
b65ca3f49f
|
m1rc3/norruption/LOG: added results of last (long) test run
|
2011-09-08 08:34:40 -03:00 |
|
Werner Almesberger
|
1152189acb
|
labsw/LOG: theory that the failures to switch are caused by EMI (on buttons)
|
2011-09-07 10:56:06 -03:00 |
|
Werner Almesberger
|
37df000637
|
m1rc3/norruption/LOG: cycling in RTEMS boot is sufficient to trigger corruption
I.e., it's not necessary that FN be up or even rendering. Note that
all is was still without NOR locking.
|
2011-09-07 09:20:37 -03:00 |
|
Werner Almesberger
|
09ac71f0e0
|
labsw/LOG: more details on misbehaviour
|
2011-09-07 06:27:27 -03:00 |
|
Werner Almesberger
|
ed286e6982
|
m1rc3/norruption/loop2: shorter loop (17 s instead of 77 s) that cycles in RTEMS boot, without rendering
|
2011-09-07 05:12:03 -03:00 |
|
Werner Almesberger
|
05c52e7390
|
labsw/LOG: reworked power supply bypassing
|
2011-09-07 04:50:44 -03:00 |
|
Werner Almesberger
|
a42bf17291
|
labsw/LOG: added more details on occasional labsw malfunction
|
2011-09-07 04:24:05 -03:00 |
|
Werner Almesberger
|
757f19cd7b
|
moved m1/torture/ to more specific m1rc3/norruption/
|
2011-09-07 04:23:32 -03:00 |
|
Werner Almesberger
|
29677f4707
|
m1/torture/LOG: activity log (with various build instructions)
|
2011-09-07 04:20:08 -03:00 |
|
Werner Almesberger
|
17ec8fa64d
|
labsw/LOG: labsw occasionally doesn't do what it's told; described remedies
|
2011-09-06 20:33:44 -03:00 |
|
Werner Almesberger
|
bcd12fe644
|
m1/jtag-boot/: moved explanation from mkboot to README and added more details
|
2011-09-06 18:54:39 -03:00 |
|
Werner Almesberger
|
f3b289413d
|
m1/jtag-boot/mkboot: added comments with pointers to information sources
|
2011-09-06 12:29:31 -03:00 |
|
Werner Almesberger
|
96a5dd3b60
|
m1/torture/: quick and dirty power-cycling test loop
|
2011-09-06 12:09:56 -03:00 |
|
Werner Almesberger
|
2c896d860d
|
m1/jtag-boot/Makefile: run UrJTAG in quiet mode
|
2011-09-06 11:59:09 -03:00 |
|
Werner Almesberger
|
2ef6c7e13f
|
m1/jtag-boot/boot.bit: removed generated file, oops
|
2011-09-06 11:38:54 -03:00 |
|
Werner Almesberger
|
87aa1e7345
|
m1/jtag-boot/: quick hack to boot an M1 with the "regular" bitstream (from NOR)
|
2011-09-06 11:37:01 -03:00 |
|
Werner Almesberger
|
e98ea2bfdb
|
labsw/tool/: basic labsw control utility
|
2011-09-06 04:21:36 -03:00 |
|
Werner Almesberger
|
c4b1dd425e
|
labsw/fw/: added EP0 commands; main loop now toggles
|
2011-09-06 04:10:37 -03:00 |
|
Werner Almesberger
|
c90fa3b3ae
|
labsw/BOOKSHELF: added the BAS16WT flyback diode
|
2011-09-05 15:34:16 -03:00 |
|
Werner Almesberger
|
f595b71468
|
labsw/LOG: updated with latest results
|
2011-09-05 15:31:04 -03:00 |
|
Werner Almesberger
|
149be29ac7
|
labsw/fw/: make loop use all front panel elements; set CH1/2 opto to open-drain
|
2011-09-05 14:10:42 -03:00 |
|
Werner Almesberger
|
1717be8826
|
labsw/mech/front.fpd: reduced width from 104 to 103.6 mm, LED hole from 6.9 to 6.2 mm
|
2011-09-05 14:09:13 -03:00 |
|
Werner Almesberger
|
d39fbee97e
|
labsw/mech/Makefile: updated board location for #2 face plate run
|
2011-09-05 08:26:13 -03:00 |
|
Werner Almesberger
|
3dc74fcac8
|
labsw/mech/Makefile: fixed error handling of pipes; target "pos" for positioning
|
2011-09-05 08:11:59 -03:00 |
|
Werner Almesberger
|
d0309ad6d1
|
mech/front.fpd: increased banana jack hole diameter from 8.0 mm to 8.1 mm
|
2011-09-05 05:53:30 -03:00 |
|
Werner Almesberger
|
96cd3dd4fd
|
mech/doit: store cameo job in temporary file, for easier debugging
|
2011-09-05 05:53:00 -03:00 |
|
Werner Almesberger
|
e67eab1aa1
|
labsw/LOG: added front plate milling results
|
2011-09-04 23:05:25 -03:00 |
|
Werner Almesberger
|
1d4b89ec4f
|
labsw/mech/font.fpd: increased banana jack hole from 6 mm to 8 mm
|
2011-09-04 22:01:50 -03:00 |
|
Werner Almesberger
|
fd6b95dbb6
|
labsw/mech/Makefile: increased engraving depth from 0.2 mm to 0.5 mm
|
2011-09-04 22:00:48 -03:00 |
|
Werner Almesberger
|
0dd3964d6c
|
labsw/mech/Makefile: oops, it's mill.rml, not mill.tmp
|
2011-09-04 20:50:47 -03:00 |
|
Werner Almesberger
|
596fe88023
|
labsw/mech/: added process to mill front plate
|
2011-09-04 20:36:30 -03:00 |
|
Werner Almesberger
|
2be054814c
|
labsw/mech/front.fpd: updated logo geometry
|
2011-09-04 17:08:17 -03:00 |
|
Werner Almesberger
|
1121b71b03
|
labsw/fw/Makefile: remove io-parts.h on clean; improved dependencies of io-parts.h
|
2011-09-04 12:35:59 -03:00 |
|
Werner Almesberger
|
d92a53c79e
|
logo/qi-hw.fig: with Allin Kahrl's dimensions and a 2 units keep out area
|
2011-09-04 12:01:15 -03:00 |
|
Werner Almesberger
|
cc65307514
|
labsw/LOG: log of development
|
2011-09-03 12:45:16 -03:00 |
|
Werner Almesberger
|
513f3f8024
|
labsw/labsw.sch: label "IN_1" was in italics - changed to normal
|
2011-09-03 12:34:38 -03:00 |
|
Werner Almesberger
|
5649c890f7
|
labsw/fw/: added simple button -> LED / relay change loop
|
2011-09-03 12:33:43 -03:00 |
|
Werner Almesberger
|
e73383b7d8
|
labsw/sw/: basic firmware - just enumerates
|
2011-09-03 06:14:29 -03:00 |
|
Werner Almesberger
|
14f70fd819
|
labsw/: changed resistors for opto-coupler LEDs from 180 to 150 Ohm
|
2011-09-03 03:35:15 -03:00 |
|
Werner Almesberger
|
2a08a7d40f
|
labsw/: changed hole in DIP from 0.5 mm to 0.8 mm, ratio from 2.5 to 2
|
2011-09-03 02:56:16 -03:00 |
|
Werner Almesberger
|
d8d372755d
|
labsw/: made trace connecting the relays to 5V look less accidental
|
2011-09-03 01:39:17 -03:00 |
|