mirror of
git://projects.qi-hardware.com/xburst-tools.git
synced 2024-11-01 08:22:47 +02:00
clean the Makefile and README
This commit is contained in:
parent
71d4baa6b0
commit
04d76e1139
73
Makefile
73
Makefile
@ -1,73 +0,0 @@
|
||||
# "PanGu Makefile" - for setting up the PanGu development environment
|
||||
#
|
||||
# Copyright 2009 (C) Qi Hardware inc.,
|
||||
# Author: Xiangfu Liu <xiangfu@qi-hardware.com>
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License
|
||||
# version 3 as published by the Free Software Foundation.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin Street, Fifth Floor,
|
||||
# Boston, MA 02110-1301, USA
|
||||
|
||||
# for the device stage
|
||||
FLASH_TOOL_PATH = ./usbboot
|
||||
STAGE1_PATH = $(FLASH_TOOL_PATH)/xburst_stage1
|
||||
STAGE2_PATH = $(FLASH_TOOL_PATH)/xburst_stage2
|
||||
CROSS_COMPILE ?= mipsel-openwrt-linux-
|
||||
|
||||
CFLAGS="-O2"
|
||||
|
||||
### u-boot
|
||||
.PHONY: u-boot
|
||||
u-boot:
|
||||
git clone git://github.com/xiangfu/qi-u-boot.git u-boot
|
||||
cd u-boot && \
|
||||
make qi_lb60_config && \
|
||||
make
|
||||
|
||||
### kernel
|
||||
.PHONY: kernel
|
||||
kernel:
|
||||
git clone git://github.com/xiangfu/qi-kernel.git kernel
|
||||
cd kernel && \
|
||||
make pi_defconfig && \
|
||||
make uImage
|
||||
|
||||
### flash-boot
|
||||
.PHONY: usbboot
|
||||
usbboot: stage1 stage2
|
||||
cd $(FLASH_TOOL_PATH)
|
||||
./autogen.sh && \
|
||||
./configure && \
|
||||
make
|
||||
|
||||
stage1:
|
||||
make CROSS_COMPILE=$(CROSS_COMPILE) -C $(STAGE1_PATH)
|
||||
|
||||
stage2:
|
||||
make CROSS_COMPILE=$(CROSS_COMPILE) -C $(STAGE2_PATH)
|
||||
|
||||
### clean up
|
||||
distclean: clean clean-usbboot
|
||||
|
||||
clean:
|
||||
|
||||
clean-usbboot:
|
||||
make clean CROSS_COMPILE=$(CROSS_COMPILE) -C $(STAGE1_PATH)
|
||||
make clean CROSS_COMPILE=$(CROSS_COMPILE) -C $(STAGE2_PATH)
|
||||
make clean -C $(FLASH_TOOL_PATH)
|
||||
|
||||
help:
|
||||
@make --print-data-base --question | \
|
||||
awk '/^[^.%][-A-Za-z0-9_]*:/ \
|
||||
{ print substr($$1, 1, length($$1)-1) }' | \
|
||||
sort | \
|
||||
pr --omit-pagination --width=80 --columns=1
|
73
README
73
README
@ -1,73 +0,0 @@
|
||||
Prepare for Reflash Device
|
||||
--------------------
|
||||
=serial console=
|
||||
at the back of Ben Nanonote, there is "GND", "TXD" and "RXD",
|
||||
you can get serial output from those pins
|
||||
you need a TTL <-> RS232 converter. because the Ben Nanonote serial
|
||||
console is TTL. here[1] is the serial PIN in the board.
|
||||
|
||||
=toolchain=
|
||||
$ git clone git://github.com/lindnermarek/openwrt-x-burst.git[2]
|
||||
$ git checkout --track -b x-burst origin/x-burst
|
||||
$ make menuconfig
|
||||
(select 'XBurst JZ47x0 [2.6]' in 'Target System')
|
||||
$ make
|
||||
then you will get toolchain under /PATH/TO/openwrt-x-burst/staging_dir/
|
||||
toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/bin
|
||||
|
||||
=xburst-tools (usbboot tools)=
|
||||
you can get source code at git://github.com/xiangfu/xburst-tools.git[3]
|
||||
$ cd /PATH/TO/xburst-tools/usbboot
|
||||
$ ./autogen.sh && ./configure && make && sudo make install
|
||||
then you got the 'usbboot' command. that is for the reflash.
|
||||
|
||||
=u-boot=
|
||||
in openWRT menuconfig-->Target Images-->Build U-Boot bootloader -->
|
||||
U-Boot target board (NEW) --> input 'qi_lb60
|
||||
|
||||
here[4] is the u-boot github URL
|
||||
$ make qi_lb60_config
|
||||
$ make
|
||||
there is 'u-boot-nand.bin' is for Ben
|
||||
|
||||
|
||||
How To Reflash
|
||||
--------------------
|
||||
1. plug the Ben to your computer. direct connect. no usb hub.
|
||||
2. short the two pin ('boot from usb' show in [1])
|
||||
3. press 'RESET' at the back of Ben
|
||||
4. in you computer run [5] and [6]. then you flashed the bootloader and kernel
|
||||
to nand flash.
|
||||
5. rootfs: format your SD card.
|
||||
the first partition must VFAT and others is EXT2.
|
||||
we can put the kernel(uImage) in the first partition. put the rootfs in second partition.
|
||||
uncompress openwrt rootfs to second partition of SD card
|
||||
6. now you can boot your Ben.
|
||||
|
||||
----
|
||||
[1] http://www.openmobilefree.net/?p=61
|
||||
[2] here is the web site
|
||||
http://github.com/lindnermarek/openwrt-x-burst/commits/x-burst
|
||||
now we put the code in github.com
|
||||
[3] in folder 'usbboot', here is the tar package and Debian package.
|
||||
http://cloud.github.com/downloads/xiangfu/xburst-tools/xburst-tools_0.0_200906.tar.gz
|
||||
http://cloud.github.com/downloads/xiangfu/xburst-tools/xburst-tools_0.0_200906-1_i386.deb
|
||||
[4] http://github.com/xiangfu/qi-u-boot/tree
|
||||
[master] is the last u-boot.
|
||||
command: "mmc init;fatload mmc 0 0x80600000 uImage;bootm" is for boot the kernel in sd card.
|
||||
[5] flash.u-boot.sh
|
||||
--------
|
||||
#!/bin/bash
|
||||
U_BOOT=/PATH/TO/u-boot-nand.bin
|
||||
sudo ../usbboot/src/usbboot -c "\
|
||||
boot;\
|
||||
nprog 0 $U_BOOT 0 0 -n"
|
||||
|
||||
[6] flash.kernel.sh
|
||||
----------
|
||||
#!/bin/bash
|
||||
START_PAGE=2048
|
||||
KERNEL=/PATH/TO/KERNEL_UIMAGE
|
||||
sudo usbboot -c "boot"
|
||||
sudo usbboot -c "nprog $START_PAGE $KERNEL 0 0 -n"
|
||||
|
12
xbboot/scripts/boot-uboot.sh
Executable file
12
xbboot/scripts/boot-uboot.sh
Executable file
@ -0,0 +1,12 @@
|
||||
#!/bin/bash
|
||||
../host-app/xbboot set_addr 0x80002000
|
||||
../host-app/xbboot bulk_write ../target-stage1/stage1.bin
|
||||
../host-app/xbboot start1 0x80002000
|
||||
../host-app/xbboot get_info
|
||||
|
||||
../host-app/xbboot flush_cache
|
||||
|
||||
../host-app/xbboot set_addr 0x80100000
|
||||
../host-app/xbboot bulk_write $1
|
||||
../host-app/xbboot flush_cache
|
||||
../host-app/xbboot start2 0x80100000
|
12
xbboot/scripts/boot-zImage.sh
Executable file
12
xbboot/scripts/boot-zImage.sh
Executable file
@ -0,0 +1,12 @@
|
||||
#!/bin/bash
|
||||
../host-app/xbboot set_addr 0x80002000
|
||||
../host-app/xbboot bulk_write ../target-stage1/stage1.bin
|
||||
../host-app/xbboot start1 0x80002000
|
||||
../host-app/xbboot get_info
|
||||
|
||||
../host-app/xbboot flush_cache
|
||||
|
||||
../host-app/xbboot set_addr 0x80600000
|
||||
../host-app/xbboot bulk_write $1
|
||||
../host-app/xbboot flush_cache
|
||||
../host-app/xbboot start2 0x80600000
|
Loading…
Reference in New Issue
Block a user