Werner Almesberger
92b93912a4
modules/: add E-SWITCH series 320 tact switch
2012-08-22 16:34:32 -03:00
Werner Almesberger
d37268a6ba
modules/: add PAD_S_120x120; correct classification of PAD_S_150x150
2012-08-10 08:48:52 -03:00
Werner Almesberger
26307b35a0
modules/INFO: add resources for ZX62-B-5PA and ZX62M-B-5P
2012-08-03 20:29:52 -03:00
Werner Almesberger
707aa70cf7
modules/zx62-b-5pa.fpd: Hirose ZX62-B-5PA micro-USB B receptacle, std, no posts
2012-08-03 20:28:58 -03:00
Werner Almesberger
932e5aaf78
modules/zx62m-b-5p.fpd: add Y size of rear pads
2012-08-03 20:24:32 -03:00
Werner Almesberger
cbfba8369f
modules/meander-2450MHz.fpd: make all pads "trace" (regression)
...
The ben-wpan boards were built with the antenna as "trace" (i.e., the
copper is covered with solder mask), but then I adapted the wrong
version of the footprint for kicad-libs.
2012-07-19 00:10:19 -03:00
Werner Almesberger
c0e33e5872
modules/usb_a_plug_smt.fpd: mixed TH/SMT; change the two TH pads to "bare"
...
Rationale: if soldering in the SMT process, one probably wants to check
the TH pads anyway, so there is little point in putting solder paste on
them with the hope that some may stick.
If soldering in a separate TH process, solder paste could clog the holes.
2012-07-19 00:04:29 -03:00
Werner Almesberger
9be533bcdc
modules/pads.fpd: make also square and rectangular pads "bare"
2012-07-19 00:03:32 -03:00
Werner Almesberger
00711fd4bc
modules/: make pads of all fully through-hole components "bare"
2012-07-19 00:02:05 -03:00
Werner Almesberger
faedf5694d
modules/usb-a-pcb.fpd: change pad type from "normal" to "bare"
2012-07-18 23:41:26 -03:00
Werner Almesberger
2c9476c011
modules/: add ZX62M-B-BP (zx62m-b-5p.fpd) to catalog and Makefile
2012-07-14 22:46:59 -03:00
Werner Almesberger
9f127475ac
modules/header.fpd: rearrange measurements; add pitch measurement
2012-07-14 22:44:50 -03:00
Werner Almesberger
caa6e50b9c
modules/dip.fpd: add pitch measurement
2012-07-14 22:38:12 -03:00
Werner Almesberger
5ed1670859
modules/: add measurementes to DIP-4/6-300mil; add to catalog and Makefile
2012-07-14 22:37:19 -03:00
Werner Almesberger
563e5944e3
modules/dip.fpd: add measurements
2012-07-13 23:42:36 -03:00
Werner Almesberger
6ff4042bd2
modules/sot.fpd: put width measurement at constant distance from pad
...
It intersected with the pad in the case of SOT-235.
2012-07-13 23:29:56 -03:00
Werner Almesberger
6216a97c22
modules/header.fpd: add measurement of overall length
2012-07-13 23:13:55 -03:00
Werner Almesberger
71075ec705
modules/pads-array.fpd: added measurements; enabled more pads types
...
We now also generate arrays of 2-10 60x60mil, 80x80mil, and 60x120mil
pads, all with a 100 mil spacing.
2012-07-13 23:01:03 -03:00
Werner Almesberger
8114d1d93f
track "gencat" to "genkicat" name change
2012-07-12 20:15:12 -03:00
Werner Almesberger
20f476b930
modules/Makefile: move "clean" and "spotless" at their usual place at the end
2012-07-12 19:19:44 -03:00
Werner Almesberger
5496ac5af6
modules/Makefile (missing): new target to list footprints missing in hierarchy
2012-07-12 19:18:58 -03:00
Werner Almesberger
62fa46c90c
modules/{Makefile, DESCR}: include descriptions in catalog
...
DESCR is just for demonstration purposes. Need to think of a way to
extract descriptions from material we already have.
2012-07-12 18:55:40 -03:00
Werner Almesberger
475ba28158
modules/Makefile: generate list of .fpd files from variable MODULES
...
... instead of scanning the directory. Also commend out the two footprints
currently not included in MODULES (zx62m-b-5p.fpd and dip4of6.fpd).
2012-07-12 16:33:50 -03:00
Werner Almesberger
1d23f0a742
modules/HIERARCHY: enable MEANDER-2450MHz-{right,left}-1.0mm
...
The now longer yield invalid Postscript, so we can include them in the
catalog.
2012-07-12 16:24:50 -03:00
Werner Almesberger
711147c11d
modules/meander-2450MHz.fpd: do not try to add a tail if zero-sized
...
A zero-sized tail would produce a zero-sized pad, which is no longer allowed.
2012-07-12 16:16:01 -03:00
Werner Almesberger
c8d825ddaa
modules/: first elements for catalog creation (WIP)
...
There are still the following problems to solve:
- the index needs wider columns since footprint names tend to be longer
than component names,
- some things are too big and need scaling (maybe fix this in fped),
- the antenna without "tail" produces one of those zero-width pads
fped likes so much
2012-07-12 04:45:43 -03:00
Werner Almesberger
c21e1f0424
modules/tssop5.fpd: remove zero-width pad 5
2012-07-12 04:38:38 -03:00
Werner Almesberger
359ccc048d
modules/to.fpd (TO-252): remove zero-width pad 2
...
The pad was invisible but still existed, breaking fped's Postscript
output.
2012-07-12 04:36:51 -03:00
Adam Wang
6c2cafea74
qfp.fpd: added more info about QFP48
2012-06-25 15:50:01 +08:00
Adam Wang
3b35416fbb
pads.fpd: added variant sets of C(circle), R(oround) and S(square) pads.
...
PAD_${type}_$size
2012-06-19 14:27:19 +08:00
Adam Wang
045e8488bf
added header.fpd: copied from Werner Almesberger
2012-06-19 11:23:53 +08:00
Adam Wang
f5392aef5b
generic header through hole type
...
header.fpd: copied from Werner Almesberger
- HDR-${C}x${R}-$P
from http://projects.qi-hardware.com/index.php/p/wernermisc/source/tree/master/labsw/modules/header.fpd
2012-06-19 11:19:37 +08:00
Adam Wang
445734e15b
sot.fpd: added package of SO-235 also for TI DBV(R-PDSO-G5)
2012-06-19 10:43:54 +08:00
Adam Wang
7be9efc1c5
ledsmd.fpd: fixed polarized marker
2012-06-18 18:01:17 +08:00
Adam Wang
dd2c1a95b9
Makefile: added necessary fpd filename to generate mod file
2012-06-18 16:47:25 +08:00
Adam Wang
667f6c9f10
dcjack.fpd: fixed "hole (line 63) not completely inside pad "3" (line 67)"
2012-06-18 10:19:55 +08:00
Adam Wang
0f80888e7e
spacer.fpd: added packages of SPACER-$nominal-$disc-$keepout$type
...
based on Werner Almesberger's work:
http://projects.qi-hardware.com/index.php/p/wernermisc/source/tree/master/labsw/modules/spacer.fpd
2012-06-15 18:06:52 +08:00
Adam Wang
c456f08cb1
tactile-sw-spst-ra-dip.fpd: added package of TACTIL-SW-${TYPE}-RA-${A}-${B}
2012-06-15 16:46:46 +08:00
Adam Wang
3a6c44160d
mic-ra-dip.fpd: added package of MIC-RA-DIP-${Dia}x${Height}
2012-06-15 11:13:44 +08:00
Adam Wang
e33374c46f
he-2row-dip.fpd: based on Werner Almesberger's he10.fpd
...
added HE-${n}x2-${px} naming package with outline and marker frames
2012-06-15 10:18:09 +08:00
Adam Wang
eeae68beb1
8_10-socket-ra.fpd: added 8:10-SOCKET-RA
2012-06-14 20:41:07 +08:00
Adam Wang
abb5e71464
rca-3-ra.fpd: renamed package name to RCA-3-RA
2012-06-14 17:00:12 +08:00
Adam Wang
43a6631a46
rca-3-ra.fpd: added RCA-3-RA
2012-06-14 16:54:55 +08:00
Adam Wang
c87046103a
dvi-recept-ra.fpd: added DVI-RECEPT-RA
2012-06-14 13:45:47 +08:00
Adam Wang
2594403a96
usb-a-dual-recept-r.fpd: added USB-A-DUAL-RECEPT-RA
2012-06-13 21:20:10 +08:00
Adam Wang
9f07d100ad
dcjack.fpd: added DCJACK-${L}x${W}
2012-06-13 15:51:49 +08:00
Adam Wang
22a5af8fc5
din-5.fpd: added DIN-SOCKET-PCB-5-45
2012-06-13 14:18:39 +08:00
Adam Wang
c14108c6f7
xlr-plug.fpd: added XLR-PANEL-HORIZ/PCB-PLUG
2012-06-13 11:21:13 +08:00
Adam Wang
6276cf2fd9
xlr-socket.fpd: fixed pad 3's solder pad ring size.
2012-06-13 10:52:27 +08:00
Adam Wang
ec427d9ea9
xlr-socket.fpd: added XLR-PANEL-HORIZ/PCB-SOCKET
2012-06-13 10:19:26 +08:00
