juhosg
93945c8815
ramips: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:18 +00:00
juhosg
22ae6b82eb
ar71xx: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:17 +00:00
juhosg
3a3aa7378b
kirkwood: use uci-defaults to configure different boards
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:15 +00:00
juhosg
436c9f6d34
ramips: WAN LED for D-Link DIR-300-B1
...
Add led devices for D-Link DIR-300-B1 WAN LED.
Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.
Closes: https://dev.openwrt.org/ticket/11326
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
on the WAN interface]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:03 +00:00
nbd
8c1c75ba17
ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 20:39:50 +00:00
nbd
0f299fab07
ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 02:55:59 +00:00
nbd
dfea949949
ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 21:02:41 +00:00
nbd
295c63c334
kernel: fix suppressing -s for linking modules when profiling is enabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 21:02:36 +00:00
juhosg
d3fa7efc8c
ar71xx: fix TL-WR1041 image size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:21:47 +00:00
juhosg
75c71fcaa0
ramips: rt3883: add device registration code for the SPI controller
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:10:00 +00:00
juhosg
84b342399c
ramips: allow to use the SPI driver on RT3662/RT3883
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:58 +00:00
juhosg
1e3e199faa
ramips: rt3883: fix GPIO reservation for the SPI pins
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:56 +00:00
juhosg
0c9cb51fbb
ramips: rt305x: remove superfluous controller_data assignment
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:52 +00:00
juhosg
ce2fd1dbc9
ramips: make rt2x00 firmware extraction quiet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:50 +00:00
juhosg
39068e8b25
generic: rtl8367: rename a misnamed variable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:47 +00:00
juhosg
11d6be39a6
generic: rtl8366_smi: remove duplicated spinlock initialization
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:45 +00:00
juhosg
63d3e3114d
generic: rtl8366_smi: rename debugfs Kconfig symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:43 +00:00
juhosg
5a1c605a9e
generic: rtl8367: allow to use VLANs > 31
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:41 +00:00
blogic
e4b72001f6
[lantiq] move files-3.3 -> files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:13:02 +00:00
blogic
c9e0ccf07c
[lantiq] 3.2 R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:12:59 +00:00
blogic
c8e24ec13e
[lantiq] dgn3500 support with eeprom loading from sysfs
...
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules. I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.
SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.
Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.
Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:22 +00:00
blogic
f72e7bf12d
[lantiq] fixes zyxel p2601hnfx
...
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:20 +00:00
blogic
2b03aafe31
[lantiq] Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:16 +00:00
nbd
95d801c59d
kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:16:37 +00:00
juhosg
fe77f5d922
linux/3.2: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:37 +00:00
juhosg
1ee6958324
xburst: remove support for old kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:35 +00:00
juhosg
287550be20
xburst: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:33 +00:00
juhosg
8f313bd0fd
xburst: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:32 +00:00
juhosg
e2dd39f3dc
ppc44x: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:30 +00:00
juhosg
14aefb43c8
ppx44x: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:28 +00:00
juhosg
5061f8857c
ppc44x: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:27 +00:00
juhosg
000012926a
cobalt: switch to 3.3 and add broken flag
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:26 +00:00
juhosg
bc9bf715d9
ep93xx: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:24 +00:00
juhosg
dee80699d1
ep93xx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:23 +00:00
juhosg
a195c06c00
ep93xx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:21 +00:00
juhosg
e468dc1413
au1000: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:18 +00:00
juhosg
accbbf39c0
au1000: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:17 +00:00
juhosg
5c8cc31fb8
au1000: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:15 +00:00
juhosg
e3e4a95d9b
linux/3.1: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:09 +00:00
juhosg
e17d6b0709
omap24xx: remove 3.1 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:07 +00:00
juhosg
4ea55a169b
omap24xx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:05 +00:00
juhosg
c7e92c13d2
cns3xxx: remove 3.1 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:03 +00:00
juhosg
a27b48f2d8
cns3xxx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:02 +00:00
nbd
4cf70ab2e1
kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 14:43:58 +00:00
jogo
878544bb07
bcm63xx: build images for DSL-274XB revision F1
...
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.
Known issues:
* wifi led inverted (on when wifi is off and vice cersa)
* same issues as generic bcm6328 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:51 +00:00
jogo
092e90e1ef
bcm63xx: add ath9k to atheros wifi profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:48 +00:00
jogo
f095146c5d
bcm63xx: enable bcm6328 support and required drivers
...
BCM6328 support is in a usable state, with the following issues
* internal switch port not configurable
* external phys not supported
* broadcom wifis will probably not work correctly
* and all other generic bcm63xx issues (so yes, still no ADSL)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:46 +00:00
jogo
cbdf1f350a
bcm63xx: add support for DSL-274XB rev F1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:43 +00:00
jogo
5a482fc8b3
bcm63xx: fix port state after network down
...
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:40 +00:00
jogo
0bdb7cbf98
bcm63xx: add a fixup for ath9k devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:37 +00:00
jogo
d1683ec919
bcm63xx: add support for the HSSPI controller
...
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:33 +00:00
jogo
35f8e31243
bcm63xx: add preliminary support for bcm6328
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:29 +00:00
jogo
c9204063aa
bcm63xx: add flash type detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:25 +00:00
jogo
fdbaed3349
bcm63xx: pad Speedport W303 V images to 4 MiB
...
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:22 +00:00
jogo
34f9a0d745
bcm63xx: add a default switch configuration for DSL-274XB
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:17 +00:00
jogo
3df0e1587c
bcm63xx: setup network config through uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:14 +00:00
jogo
acbbcb35b8
bcm63xx: move the board name workaround to /lib/brcm63xx.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:11 +00:00
jogo
2c54f4168e
bcm63xx: use the exact board id as board identification string
...
No need to keep the bcm63xx/ at the start or the chipid info at the end.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:08 +00:00
nbd
2ab926c84b
kernel: fix a warning in the connmark module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24 18:25:08 +00:00
juhosg
530802ba69
kernel: update linux 3.3 to 3.3.7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:32 +00:00
juhosg
71526f8705
ar71xx: fix an insignificant typo
...
Patch from #11485 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:30 +00:00
juhosg
e9ac406967
ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
...
Patch by Kamil Trzciński <ayufan@osk-net.pl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:25 +00:00
juhosg
e61440d8bd
ar71xx: add support for TP-Link TL-MR3040
...
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:24 +00:00
juhosg
4a1bbe457a
ramips: Add byte queue limits support to net/ethernet/ramips_main.c
...
Add byte queue limits support to net/ethernet/ramips_main.c
"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:23 +00:00
juhosg
7d9b449118
ramips: Enable sysupgrade for Sitecom WL-351
...
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:22 +00:00
juhosg
8a8504629a
linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver
...
Should fix #11513 . Tested with the x86/generic squashfs image within a VM.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:19 +00:00
nbd
fb17c4e710
lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20 21:58:03 +00:00
nbd
6c09d6b4d8
kernel: merge a net-next fq_codel backlog handling fix
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 22:12:15 +00:00
juhosg
2d3a55136a
omap24xx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:22:32 +00:00
juhosg
71f3abe21d
cns3xxx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:53 +00:00
juhosg
2bb56acc0c
linux/2.6.39: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:51 +00:00
juhosg
2afa505fd1
cns3xxx: sync kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:48 +00:00
juhosg
197bf733d7
cns3xxx: remove 2.6.39 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:46 +00:00
juhosg
acd1d54c28
cns3xxx: switch to 3.1
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:44 +00:00
juhosg
d87b48bbe9
x86: remove support for old kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:42 +00:00
juhosg
336ab20ec5
x86: remove subtarget specific LINUX_VERSION overrides
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:38 +00:00
juhosg
e32a177913
x86/ep80579: switch to 3.3
...
Also fix build errors in the ep80579-drivers package.
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:33 +00:00
hauke
5ce0dd5cbe
brcm47xx: fix nvram read out on devices with serial flash
...
detect nvram on Linksys E3200
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 16:04:10 +00:00
hauke
1b9dfb678c
brcm47xx: bcma: fix null pointer
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:46:30 +00:00
hauke
aa8a1880a1
brcm47xx: ssb: recognize ARM Cortex M3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:45:51 +00:00
hauke
addb48537a
brcm47xx: some fixes for the USB driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:44:25 +00:00
juhosg
de772a61cc
cobalt: remove 2.6.39 specific patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:59:22 +00:00
juhosg
f2569ecf09
x86/olpc: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:32 +00:00
juhosg
8f9cbdeccd
x86: image: select bootscript images by default for OLPC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:29 +00:00
nbd
009c4c9327
adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 21:20:23 +00:00
nbd
34f1bc2fb3
target: add a feature flag for RTC support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31777 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 15:28:09 +00:00
hauke
a08e2a1c37
kernel: add some missing config options added by r31756
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31774 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:28:30 +00:00
hauke
b1e2eade99
kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31772 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:22:38 +00:00
hauke
c343cde492
brcm47xx: remove support for kernel 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31771 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:20:10 +00:00
juhosg
dcea0bf81c
x86/thincan: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:01 +00:00
juhosg
db081f453b
x86/xen_domu: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:00 +00:00
juhosg
4dcd044429
x86/kvm_guest: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:58 +00:00
juhosg
5fe6f552d3
x86/generic: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:56 +00:00
nbd
b3c4d367ce
kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht)
...
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:
http://queue.acm.org/detail.cfm?id=2209336
Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.
Additionally,
fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.
These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.
Includes updates to codel for better portability and speed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 15:23:03 +00:00
juhosg
287ab9841e
x86/alix2: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:45:02 +00:00
juhosg
2b245c96a9
x86/net5501: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:59 +00:00
juhosg
3261e9d285
x86: sync 3.3 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31751 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:55 +00:00
juhosg
2075a32be0
x86: sync 3.2 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:52 +00:00
juhosg
005d04baef
x86: sync 2.6.39 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:49 +00:00
juhosg
7b285c80fb
linux/3.3: add missing symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:46 +00:00
juhosg
003fb14844
linux: add CONFIG_POWER_SUPPLY_DEBUG symbol
...
It was missing in the previous commit.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 11:12:31 +00:00
juhosg
5cc763c7b2
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:58:52 +00:00
nbd
82ff0a8569
ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:36:39 +00:00
blogic
6a54667829
[lantiq] code style cleanup of the mach files
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:05 +00:00
blogic
993c2e232f
[lantiq] adds zyxel p2601hnfx support
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:02 +00:00
blogic
5af9c39784
[lantiq] set 3.3.6 as default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:37:59 +00:00
blogic
1fffba2171
[lantiq] set 3.3.5 as default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 16:11:26 +00:00
juhosg
674c61407c
linux/3.0: R.I.P.
...
It is used by the broken omap35xx/gumstix target only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:34 +00:00
juhosg
c7b0f82f36
realview: remove 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31716 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:32 +00:00
juhosg
fd4e26402c
realview: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:31 +00:00
juhosg
6b364205d7
realview: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:29 +00:00
juhosg
96bc3c2734
linux/3.3: more missing config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:23 +00:00
nbd
3c5d4ad5a3
imagebuilder: explicitly install the kernel .ipk before installing anything else, it is no longer part of the package index ( fixes #11450 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 14:00:01 +00:00
hauke
af5a56a89c
kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 11:28:02 +00:00
juhosg
298dcd23d1
kernel: update linux 3.3 to 3.3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 09:18:32 +00:00
hauke
3ad338f697
amazon: fix section mismatch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 15:31:42 +00:00
hauke
c8c0045b91
amazon: update amazon target to kernel 3.3
...
This is just compile tested, my device is currently not working.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 15:10:40 +00:00
juhosg
501390d552
gemini: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:04:04 +00:00
juhosg
1d2df477ff
gemini: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:04:02 +00:00
juhosg
6a4f0ff0d7
gemini: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:03:59 +00:00
hauke
0b98ffdc6a
brcm47xx: generate image for Linksys WRT610N V1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 00:16:57 +00:00
hauke
05c09e7de4
kernel: ssb: add PCI IDs 0x4322 and 43222
...
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.
This fixes #10887 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 00:08:12 +00:00
hauke
8297c7ff8b
brcm47xx: fix tg3 ssb patch
...
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 23:59:12 +00:00
juhosg
d2821676fa
linux/2.6.38: R.I.P.
...
It is used only by the broken coldfire target.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:21 +00:00
juhosg
4b6fa24c63
linux/2.6.37: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:19 +00:00
juhosg
faeed4ab57
linux: add broken flag to remaining targets which are using 2.6.37
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:18 +00:00
juhosg
12701e008f
iop32x: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:36 +00:00
juhosg
9a9b022066
iop32x: switch to 3.3
...
It is compile tested only, so add a broken flag.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:34 +00:00
juhosg
5f514056be
iop32x: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:32 +00:00
juhosg
8cc898c122
sibyte: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:30 +00:00
juhosg
c53f588e2b
sibyte: switch to 3.3
...
It is compile tested only, so add a broken flag.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:28 +00:00
juhosg
8e84deb1d4
sibyte: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:26 +00:00
juhosg
976d0df463
ixp4xx: fix ixp4xx_crypto build error
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:23 +00:00
juhosg
88a3d8e65f
orion: remove the broken broken flag
...
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9
Additionally, the flag was added to a wrong place
so it had no effect.
Thanks to StrikerNL for testing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-10 20:20:43 +00:00
juhosg
f32805af2d
kirkwood: fix Kconfig symbol for NSA-310
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 16:16:52 +00:00
blogic
510366a907
[lantiq] Add 3.3 config files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:24 +00:00
blogic
d0ba13b35e
[lantiq] Add missing 3.3 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:21 +00:00
blogic
dcc5e22d87
[lantiq] Drop 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:19 +00:00
juhosg
ee96308b09
kirkwood: add support for the ZyXEL NSA-310
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:43 +00:00
juhosg
838f9f9085
kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support
...
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:41 +00:00
juhosg
843274aa37
kirkwood: enable GPIO sysfs interface
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:40 +00:00
juhosg
7af2aa70a5
kirkwood: nuke 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:39 +00:00
juhosg
aafa8c1910
kirkwood: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:37 +00:00
juhosg
4942fd2b79
kirkwood: add 3.3 support
...
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:36 +00:00
juhosg
a944623dae
ixp4xx: nuke 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:44 +00:00
juhosg
93692ad86e
ixp4xx: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:43 +00:00
juhosg
fb3eca1a8e
mpc85xx: remove 2.6.38 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31661 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:41 +00:00
juhosg
b39529458d
mpc85xx: switch to 3.3 and add broken flag
...
It is compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:39 +00:00
juhosg
eff5ef6a36
orion: nuke 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:38 +00:00
juhosg
56d769bd1e
orion: switch to 3.3 and add broken flag
...
It is compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:37 +00:00
juhosg
4672c91460
linux/3.3: add missing RTC symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:30 +00:00
juhosg
9179b1bd6b
ar71xx: fix build error if PCI is disabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 21:16:22 +00:00
juhosg
fe2be6a9a3
kernel: update linux 3.3 to 3.3.5
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 20:11:43 +00:00
juhosg
6365d3e544
pxa: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:40:15 +00:00
juhosg
15b93cf7b1
pxa: switch to 3.3 and mark it as broken
...
It is working in qemu, but it has not been tested on real hardware.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:40:09 +00:00
juhosg
74bfc39816
pxa: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:40:06 +00:00
jow
d0c031a4f5
atheros: Fix compilation
...
With our recent switch to the 3.3 kernel target, some headers were
occidentally omitted.
Signed-off-by: Jonathan Bither <jonbither@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:06:39 +00:00
jogo
35009bdf80
bcm63xx: fix a race between PCI bus scan and fallback sprom registration
...
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.
Fixes #11384 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 21:25:34 +00:00
nbd
d4d537811b
kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 21:19:14 +00:00
hauke
126cc381b7
brcm47xx: add gpio_request_one()
...
This fixes a compile error with kernel 3.3.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 20:44:37 +00:00
nbd
849a172d03
atheros: clean up the patches some more
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 17:15:00 +00:00
nbd
f31721e174
atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 17:08:30 +00:00
jogo
0f0f3b9f5a
AR7: don't mark as broken
...
Linux 3.3.4 boots fine on my AR7 device.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 14:04:19 +00:00
juhosg
91b12f1c40
ar7: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:43 +00:00
juhosg
7d657a9c91
ar7: switch to 3.3 and mark the target as broken
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:41 +00:00
juhosg
02fb20885e
ar7: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:39 +00:00
juhosg
1ee5e640f0
ar7: fix kernel_entry extraction
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:36 +00:00
juhosg
0cff4f29f3
ar71xx: add profile and build image for the TL-WR1041N v2 board
...
Patch-by: Vince Huang <axishero@foxmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:02:41 +00:00
juhosg
7b820da93e
ar71xx: add support for the TP-Link TL-WR1041N v2 board
...
Patch-by: Vince Huang <axishero@foxmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31608 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:02:35 +00:00
juhosg
1c9cad5dce
ar71xx: update 3.3 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 13:56:35 +00:00
juhosg
c39d550e2f
ar71xx: fix a typo in the db120 mach file
...
Reported-by: Sven Eckelmann <sven@narfation.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 13:56:30 +00:00
hauke
34b32d26b5
brcm47xx: update target to kernel 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 12:53:37 +00:00
juhosg
a6a62009fb
linux/2.6.32: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:34 +00:00
juhosg
e3bebfe1fb
rdc: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:32 +00:00
juhosg
9ca85294f4
rdc: switch to 3.3 and mark the target as broken
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:30 +00:00
juhosg
7fa6105b4e
rb532: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:29 +00:00
juhosg
651eb17ddc
rb532: switch to 3.3 and mark the target broken
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:26 +00:00
juhosg
dc1df9e044
rb532: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:23 +00:00
juhosg
321be1fc52
mpc83xx: remove broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:21 +00:00
juhosg
f3c883c98f
mpc83xx: populate network config from an uci-default script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:19 +00:00
juhosg
109443b2af
mpc83xx: cleanup rb333.dts
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:16 +00:00
juhosg
d5816c8a83
mpc83xx: fix MAC addresses on the RB333
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:13 +00:00
juhosg
5dad28165e
mpc83xx: fix build warnings in RB333/600 dtb wrappers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:10 +00:00
juhosg
796592856f
linux/2.6.32: fix layer7 patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 07:20:13 +00:00
kaloz
73229f8d12
[omap4]: upgrade to 3.3, enable framebuffer
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 21:51:58 +00:00
jogo
4e31867a39
adm5120: add missing NULL terminator to partition parser list
...
Fixes #11372 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 21:03:50 +00:00
hauke
14f0acdc28
brcm47xx: add support for kernel 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 20:18:41 +00:00
juhosg
9d3fb21d4a
Fix iptables abuse of kernel header files. Use exported headers instead.
...
[juhosg: export xt_layer7.h for all kernel versions]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 09:43:10 +00:00
juhosg
439a47e380
ramips: W306R V2.0 - GPIO and Network fixes
...
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
removing a line(default is correct), and reversed the
Lan/wan layout LLLLW to WLLLL.
Added: image/Makefile now builds -factory.bin files. I am
unsure of the accepted way to change the makefile but
the name of the image needs to be 'linkn Kernel Image'
in order to be accepted by the OEM firmware.
Known issue: eth0 (internal switch i think has mac address:
00:11:22:33:44:55 but i think it should be same as
the lan).
Known issue: Pressing the reset button has no noticable effect,
i would expect the router to boot failsafe if being
pressed on boot, reboot if short press and reset all
to default if long press.
[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]
Signed-off-by: David Pearce <david_18051985@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 19:17:59 +00:00
juhosg
1f249922ce
ramips: Make serial console for DIR-300-B1 work again
...
Make serial console for DIR-300-B1 work again.
With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.
Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 19:17:58 +00:00
juhosg
371f652cf1
mpc83xx: remove 2.6.36 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:26 +00:00
juhosg
d316e764cb
mpc83xx: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:25 +00:00
juhosg
01415999cf
mpc83xx: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:22 +00:00
juhosg
4b296a3cb3
linux/3.3: add more missing symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:19 +00:00
florian
a1c9b29340
[brcm63xx] use a define for the poll and debounce interval
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 15:40:26 +00:00
juhosg
c5006eede0
linux/3.3: add more missing symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-01 08:00:26 +00:00
juhosg
a12fd13e23
move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-01 08:00:25 +00:00
kaloz
7e7649baa9
[coldfire]: switch to 2.6.38
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31546 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-01 07:00:17 +00:00
juhosg
e51f7c5d1b
kernel: update linux 3.3 to 3.3.4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-30 08:38:11 +00:00
juhosg
1cfcccb5b0
linux: rtl836x: add a generic reset_switch function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:31 +00:00
juhosg
5df734f0bc
linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:29 +00:00
juhosg
1dcdbf2d3f
linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:26 +00:00
juhosg
f07500066e
ar71xx: allow to disable link polling on unused PHYs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:24 +00:00
juhosg
b20dcb287e
rb532: remove 2.6.35 support
...
The generic 2.6.35 support has been remove long time ago.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 16:56:07 +00:00
juhosg
8ca642965f
linux/3.3: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 16:56:03 +00:00
juhosg
be6aa90ec2
rdc: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:59:49 +00:00
juhosg
8e06d437aa
mpc85xx: add support for 3.3
...
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:55:28 +00:00
juhosg
c3bfb23a87
orion: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:20:40 +00:00
juhosg
418e0144a0
linux/3.3: yet another missing symbol
...
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:08:24 +00:00
juhosg
d2863cfd2d
linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip
...
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:08:22 +00:00
juhosg
3adac4c8e4
mpc85xx: add kmod-booke-wdt to the default packages
...
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:38 +00:00
juhosg
e4a752ed29
mpc85xx: don't override CONFIG_WATHCDOG
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:36 +00:00
juhosg
95fc5670e1
linux: move CONFIG_BOOKE_WDT to the generic config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31520 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:34 +00:00
juhosg
afab35ea6e
linux/2.6.36: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31519 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:33 +00:00
juhosg
b2fc0c6423
linux: add broken flag to targets which are using 2.6.36
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:32 +00:00
juhosg
3fa6652791
adm5120: create a new subtarget for the RB1xx devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:46 +00:00
juhosg
d50d82ab6e
adm5120: share a common kernel config between the subtargets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:44 +00:00
juhosg
0c3e51f31c
adm5120: merge 3.3 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31511 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:43 +00:00
juhosg
71b94eaba4
adm5120: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31510 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:37 +00:00
juhosg
064b1182e5
adm5120: switch to 3.3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:36 +00:00
juhosg
f2d86d5a21
adm5120: fix macronix bootloc patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:35 +00:00
juhosg
399af78951
ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:33 +00:00
juhosg
a7eaf12ead
adm8668: merge 3.3 fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28 10:41:43 +00:00
juhosg
d9edbe9c04
adm8668: nuke 2.6.36 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28 10:39:47 +00:00
juhosg
f127c4c7b0
adm8668: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28 10:38:53 +00:00
florian
8812c9e533
[brcm63xx] switch to gpio-keys-polled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-27 16:44:48 +00:00
juhosg
ccfe94d5e5
linux/3.3: yet another missing symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-27 06:31:43 +00:00
nbd
87e474d1bb
build: rework verbosity level selection
...
V=99 and V=1 are now deprecated in favor of a new verbosity class system,
though the old flags are still supported.
You can set the V variable on the command line (or OPENWRT_VERBOSE in the
environment) to one or more of the following characters:
- s: stdout+stderr (equal to the old V=99)
- c: commands (for build systems that suppress commands by default, e.g. kbuild)
- w: warnings/errors only (equal to the old V=1)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31484 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-26 17:53:56 +00:00
hauke
b2caa2e0b5
brcm47xx: BCMA - Modified PCI CFG space access
...
The existing code (prior to the patch) does an "ioremap_nocache" on a
subset of a memory region that I think has already been mapped, and then
un-maps that smaller region when it is finished.
Thanks Nathan Hintz for the patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 20:32:17 +00:00
juhosg
fade685a5b
adm8668: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 18:53:49 +00:00
juhosg
b2a1169d98
adm8668: build gzip compressed uImage for testing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 18:53:48 +00:00
juhosg
c363d3b566
adm8668: use a suffix for initramfs images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 18:53:46 +00:00
juhosg
1d61105c25
ar71xx: enable MIB counters in the built-in switch of the AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 13:02:11 +00:00
juhosg
efae7066fc
adm5120: remove 2.6.38 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:35 +00:00
juhosg
05735d303b
adm5120: add 3.3 support
...
Partially based on the 3.1 patches by Hartmut Knaack <knaack.h [at] gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:33 +00:00
juhosg
0e8ddda2ee
linux/3.3: fix compiler warnings in the plat_nand driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:29 +00:00
juhosg
5d61cfe7e3
adm5120: make 5GXi depends on CPU_LITTLE_ENDIAN
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:26 +00:00
hauke
91a591d328
brcm47xx: A couple of other (inconsequential) BCMA patches
...
Noticed these while reviewing the code.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 21:56:42 +00:00
hauke
ee396d93e1
brcm47xx: b44 fix workaround detection on some brcm47xx boards
...
Because of api change of nvram_getenv, the workaround failed to detect the hardware.
Based on patch by b.sander
Fixes #11268 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 20:35:46 +00:00
jogo
50d9e73cdf
bcm63xx: drop linux 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:49:27 +00:00
jogo
7a0767fe77
bcm63xx: drop linux 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:49:24 +00:00
jogo
30f433f1b9
bcm63xx: switch kernel to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:49:19 +00:00
juhosg
7318bf5df0
ar71xx: TL-WR741NDv4: add WLAN LED config
...
On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:38:44 +00:00
jogo
aa09643423
kernel: update linux 3.3 to 3.3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:38 +00:00
jogo
b628e1e894
kernel: update linux 3.2 to 3.2.16
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:35 +00:00
jogo
c2cc410c54
kernel: add some more missing kernel config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:32 +00:00
jow
5deef26972
[generic] enable NF_CONNTRACK_PROCFS for Linux 3.3, required for /proc/net/nf_conntrack ( #11339 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 00:55:57 +00:00
juhosg
81896ccacb
x86: restore config-default, it is needed for 2.6.39
...
Reported-by: Thomas Heil <heil@terminal-consulting.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 16:56:08 +00:00
juhosg
4e19be80f8
ramips: rt305x: add support for the UR-336UN board
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 16:56:06 +00:00
juhosg
06add57343
ramips: rt305x: add support for the Asus WL-330N3G board
...
This patch adds support for the ASUS WL-330N3G
Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.
The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.
r = led is red
b = led is blue
0 = led is off
xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness
initial state action led gpio state
r0 b0 r0->r1 r r0 b0
r0 b0 b0->b1 b r0 b1
r1 b0 r1->r0 0 r0 b0
r1 b0 b0->b1 r r1 *b1*
r1 b1 r1->r0 b r0 b1
r1 b1 b1->b0 r r1 b0
r0 b1 r0->r1 r r1 *b1*
r0 b1 b1->b0 0 r0 r0
Signed-off-by: Frédéric Leroy <fredo@starox.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 16:56:05 +00:00