1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-12 09:24:37 +02:00
Commit Graph

9557 Commits

Author SHA1 Message Date
juhosg
22ae6b82eb ar71xx: use the generic uci-default functions for initial LED setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:17 +00:00
juhosg
3a3aa7378b kirkwood: use uci-defaults to configure different boards
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:15 +00:00
juhosg
436c9f6d34 ramips: WAN LED for D-Link DIR-300-B1
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:03 +00:00
nbd
8c1c75ba17 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 20:39:50 +00:00
nbd
0f299fab07 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 02:55:59 +00:00
nbd
dfea949949 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 21:02:41 +00:00
nbd
295c63c334 kernel: fix suppressing -s for linking modules when profiling is enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 21:02:36 +00:00
juhosg
d3fa7efc8c ar71xx: fix TL-WR1041 image size
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:21:47 +00:00
juhosg
75c71fcaa0 ramips: rt3883: add device registration code for the SPI controller
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:10:00 +00:00
juhosg
84b342399c ramips: allow to use the SPI driver on RT3662/RT3883
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:58 +00:00
juhosg
1e3e199faa ramips: rt3883: fix GPIO reservation for the SPI pins
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:56 +00:00
juhosg
0c9cb51fbb ramips: rt305x: remove superfluous controller_data assignment
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:52 +00:00
juhosg
ce2fd1dbc9 ramips: make rt2x00 firmware extraction quiet
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:50 +00:00
juhosg
39068e8b25 generic: rtl8367: rename a misnamed variable
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:47 +00:00
juhosg
11d6be39a6 generic: rtl8366_smi: remove duplicated spinlock initialization
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:45 +00:00
juhosg
63d3e3114d generic: rtl8366_smi: rename debugfs Kconfig symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:43 +00:00
juhosg
5a1c605a9e generic: rtl8367: allow to use VLANs > 31
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:41 +00:00
blogic
e4b72001f6 [lantiq] move files-3.3 -> files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:13:02 +00:00
blogic
c9e0ccf07c [lantiq] 3.2 R.I.P.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:12:59 +00:00
blogic
c8e24ec13e [lantiq] dgn3500 support with eeprom loading from sysfs
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:22 +00:00
blogic
f72e7bf12d [lantiq] fixes zyxel p2601hnfx
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:20 +00:00
blogic
2b03aafe31 [lantiq] Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:16 +00:00
nbd
95d801c59d kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:16:37 +00:00
juhosg
fe77f5d922 linux/3.2: R.I.P.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:37 +00:00
juhosg
1ee6958324 xburst: remove support for old kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:35 +00:00
juhosg
287550be20 xburst: switch to 3.3 and add broken flag
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:33 +00:00
juhosg
8f313bd0fd xburst: add support for 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:32 +00:00
juhosg
e2dd39f3dc ppc44x: remove 3.2 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:30 +00:00
juhosg
14aefb43c8 ppx44x: switch to 3.3 and add broken flag
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:28 +00:00
juhosg
5061f8857c ppc44x: add support for 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:27 +00:00
juhosg
000012926a cobalt: switch to 3.3 and add broken flag
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:26 +00:00
juhosg
bc9bf715d9 ep93xx: remove 3.2 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:24 +00:00
juhosg
dee80699d1 ep93xx: switch to 3.3 and add broken flag
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:23 +00:00
juhosg
a195c06c00 ep93xx: add support for 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:21 +00:00
juhosg
e468dc1413 au1000: remove 3.2 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:18 +00:00
juhosg
accbbf39c0 au1000: switch to 3.3 and add broken flag
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:17 +00:00
juhosg
5c8cc31fb8 au1000: add support for 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:15 +00:00
juhosg
e3e4a95d9b linux/3.1: R.I.P.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:09 +00:00
juhosg
e17d6b0709 omap24xx: remove 3.1 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:07 +00:00
juhosg
4ea55a169b omap24xx: switch to 3.3 and add broken flag
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:05 +00:00
juhosg
c7e92c13d2 cns3xxx: remove 3.1 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:03 +00:00
juhosg
a27b48f2d8 cns3xxx: switch to 3.3 and add broken flag
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:02 +00:00
nbd
4cf70ab2e1 kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 14:43:58 +00:00
jogo
878544bb07 bcm63xx: build images for DSL-274XB revision F1
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.

Known issues:
  * wifi led inverted (on when wifi is off and vice cersa)
  * same issues as generic bcm6328 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:51 +00:00
jogo
092e90e1ef bcm63xx: add ath9k to atheros wifi profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:48 +00:00
jogo
f095146c5d bcm63xx: enable bcm6328 support and required drivers
BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:46 +00:00
jogo
cbdf1f350a bcm63xx: add support for DSL-274XB rev F1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:43 +00:00
jogo
5a482fc8b3 bcm63xx: fix port state after network down
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:40 +00:00
jogo
0bdb7cbf98 bcm63xx: add a fixup for ath9k devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:37 +00:00
jogo
d1683ec919 bcm63xx: add support for the HSSPI controller
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:33 +00:00
jogo
35f8e31243 bcm63xx: add preliminary support for bcm6328
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:29 +00:00
jogo
c9204063aa bcm63xx: add flash type detection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:25 +00:00
jogo
fdbaed3349 bcm63xx: pad Speedport W303 V images to 4 MiB
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:22 +00:00
jogo
34f9a0d745 bcm63xx: add a default switch configuration for DSL-274XB
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:17 +00:00
jogo
3df0e1587c bcm63xx: setup network config through uci-defaults
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:14 +00:00
jogo
acbbcb35b8 bcm63xx: move the board name workaround to /lib/brcm63xx.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:11 +00:00
jogo
2c54f4168e bcm63xx: use the exact board id as board identification string
No need to keep the bcm63xx/ at the start or the chipid info at the end.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:08 +00:00
nbd
2ab926c84b kernel: fix a warning in the connmark module
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24 18:25:08 +00:00
juhosg
530802ba69 kernel: update linux 3.3 to 3.3.7
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:32 +00:00
juhosg
71526f8705 ar71xx: fix an insignificant typo
Patch from #11485.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:30 +00:00
juhosg
e9ac406967 ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
Patch by Kamil Trzciński <ayufan@osk-net.pl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:25 +00:00
juhosg
e61440d8bd ar71xx: add support for TP-Link TL-MR3040
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:24 +00:00
juhosg
4a1bbe457a ramips: Add byte queue limits support to net/ethernet/ramips_main.c
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:23 +00:00
juhosg
7d9b449118 ramips: Enable sysupgrade for Sitecom WL-351
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:22 +00:00
juhosg
8a8504629a linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver
Should fix #11513. Tested with the x86/generic squashfs image within a VM.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:19 +00:00
nbd
fb17c4e710 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20 21:58:03 +00:00
nbd
6c09d6b4d8 kernel: merge a net-next fq_codel backlog handling fix
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 22:12:15 +00:00
juhosg
2d3a55136a omap24xx: add support for 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:22:32 +00:00
juhosg
71f3abe21d cns3xxx: add support for 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:53 +00:00
juhosg
2bb56acc0c linux/2.6.39: R.I.P.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:51 +00:00
juhosg
2afa505fd1 cns3xxx: sync kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:48 +00:00
juhosg
197bf733d7 cns3xxx: remove 2.6.39 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:46 +00:00
juhosg
acd1d54c28 cns3xxx: switch to 3.1
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:44 +00:00
juhosg
d87b48bbe9 x86: remove support for old kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:42 +00:00
juhosg
336ab20ec5 x86: remove subtarget specific LINUX_VERSION overrides
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:38 +00:00
juhosg
e32a177913 x86/ep80579: switch to 3.3
Also fix build errors in the ep80579-drivers package.
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:33 +00:00
hauke
5ce0dd5cbe brcm47xx: fix nvram read out on devices with serial flash
detect nvram on Linksys E3200


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 16:04:10 +00:00
hauke
1b9dfb678c brcm47xx: bcma: fix null pointer
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:46:30 +00:00
hauke
aa8a1880a1 brcm47xx: ssb: recognize ARM Cortex M3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:45:51 +00:00
hauke
addb48537a brcm47xx: some fixes for the USB driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:44:25 +00:00
juhosg
de772a61cc cobalt: remove 2.6.39 specific patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:59:22 +00:00
juhosg
f2569ecf09 x86/olpc: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:32 +00:00
juhosg
8f9cbdeccd x86: image: select bootscript images by default for OLPC
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:29 +00:00
nbd
009c4c9327 adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 21:20:23 +00:00
hauke
a08e2a1c37 kernel: add some missing config options added by r31756
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31774 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:28:30 +00:00
hauke
b1e2eade99 kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31772 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:22:38 +00:00
hauke
c343cde492 brcm47xx: remove support for kernel 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31771 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:20:10 +00:00
juhosg
dcea0bf81c x86/thincan: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:01 +00:00
juhosg
db081f453b x86/xen_domu: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:00 +00:00
juhosg
4dcd044429 x86/kvm_guest: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:58 +00:00
juhosg
5fe6f552d3 x86/generic: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:56 +00:00
nbd
b3c4d367ce kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht)
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:

http://queue.acm.org/detail.cfm?id=2209336

Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.

Additionally,

fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.

These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.

Includes updates to codel for better portability and speed

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 15:23:03 +00:00
juhosg
287ab9841e x86/alix2: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:45:02 +00:00
juhosg
2b245c96a9 x86/net5501: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:59 +00:00
juhosg
3261e9d285 x86: sync 3.3 configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31751 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:55 +00:00
juhosg
2075a32be0 x86: sync 3.2 configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:52 +00:00
juhosg
005d04baef x86: sync 2.6.39 configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:49 +00:00
juhosg
7b285c80fb linux/3.3: add missing symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:46 +00:00
juhosg
003fb14844 linux: add CONFIG_POWER_SUPPLY_DEBUG symbol
It was missing in the previous commit.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 11:12:31 +00:00
juhosg
5cc763c7b2 linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:58:52 +00:00
nbd
82ff0a8569 ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:36:39 +00:00
blogic
6a54667829 [lantiq] code style cleanup of the mach files
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:05 +00:00
blogic
993c2e232f [lantiq] adds zyxel p2601hnfx support
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:02 +00:00
blogic
5af9c39784 [lantiq] set 3.3.6 as default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:37:59 +00:00
blogic
1fffba2171 [lantiq] set 3.3.5 as default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 16:11:26 +00:00
juhosg
674c61407c linux/3.0: R.I.P.
It is used by the broken omap35xx/gumstix target only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:34 +00:00
juhosg
c7b0f82f36 realview: remove 3.0 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31716 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:32 +00:00
juhosg
fd4e26402c realview: switch to 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:31 +00:00
juhosg
6b364205d7 realview: add 3.3 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:29 +00:00
juhosg
96bc3c2734 linux/3.3: more missing config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:23 +00:00
hauke
af5a56a89c kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 11:28:02 +00:00
juhosg
298dcd23d1 kernel: update linux 3.3 to 3.3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 09:18:32 +00:00
hauke
3ad338f697 amazon: fix section mismatch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 15:31:42 +00:00
hauke
c8c0045b91 amazon: update amazon target to kernel 3.3
This is just compile tested, my device is currently not working.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 15:10:40 +00:00
juhosg
501390d552 gemini: remove 2.6.37 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:04:04 +00:00
juhosg
1d2df477ff gemini: switch to 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:04:02 +00:00
juhosg
6a4f0ff0d7 gemini: add support for 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:03:59 +00:00
hauke
0b98ffdc6a brcm47xx: generate image for Linksys WRT610N V1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 00:16:57 +00:00
hauke
05c09e7de4 kernel: ssb: add PCI IDs 0x4322 and 43222
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.

This fixes #10887.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 00:08:12 +00:00
hauke
8297c7ff8b brcm47xx: fix tg3 ssb patch
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 23:59:12 +00:00
juhosg
d2821676fa linux/2.6.38: R.I.P.
It is used only by the broken coldfire target.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:21 +00:00
juhosg
4b6fa24c63 linux/2.6.37: R.I.P.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:19 +00:00
juhosg
faeed4ab57 linux: add broken flag to remaining targets which are using 2.6.37
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:18 +00:00
juhosg
12701e008f iop32x: remove 2.6.37 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:36 +00:00
juhosg
9a9b022066 iop32x: switch to 3.3
It is compile tested only, so add a broken flag.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:34 +00:00
juhosg
5f514056be iop32x: add 3.3 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:32 +00:00
juhosg
8cc898c122 sibyte: remove 2.6.37 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:30 +00:00
juhosg
c53f588e2b sibyte: switch to 3.3
It is compile tested only, so add a broken flag.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:28 +00:00
juhosg
8e84deb1d4 sibyte: add 3.3 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:26 +00:00
juhosg
976d0df463 ixp4xx: fix ixp4xx_crypto build error
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:23 +00:00
juhosg
88a3d8e65f orion: remove the broken broken flag
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9

Additionally, the flag was added to a wrong place
so it had no effect.

Thanks to StrikerNL for testing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-10 20:20:43 +00:00
juhosg
f32805af2d kirkwood: fix Kconfig symbol for NSA-310
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 16:16:52 +00:00
blogic
510366a907 [lantiq] Add 3.3 config files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:24 +00:00
blogic
d0ba13b35e [lantiq] Add missing 3.3 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:21 +00:00
blogic
dcc5e22d87 [lantiq] Drop 2.6.32 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:19 +00:00
juhosg
ee96308b09 kirkwood: add support for the ZyXEL NSA-310
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:43 +00:00
juhosg
838f9f9085 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:41 +00:00
juhosg
843274aa37 kirkwood: enable GPIO sysfs interface
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:40 +00:00
juhosg
7af2aa70a5 kirkwood: nuke 2.6.37 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:39 +00:00
juhosg
aafa8c1910 kirkwood: switch to 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:37 +00:00
juhosg
4942fd2b79 kirkwood: add 3.3 support
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:36 +00:00
juhosg
a944623dae ixp4xx: nuke 2.6.37 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:44 +00:00
juhosg
93692ad86e ixp4xx: switch to 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:43 +00:00
juhosg
fb3eca1a8e mpc85xx: remove 2.6.38 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31661 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:41 +00:00
juhosg
b39529458d mpc85xx: switch to 3.3 and add broken flag
It is compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:39 +00:00
juhosg
eff5ef6a36 orion: nuke 3.0 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:38 +00:00
juhosg
56d769bd1e orion: switch to 3.3 and add broken flag
It is compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:37 +00:00
juhosg
4672c91460 linux/3.3: add missing RTC symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:30 +00:00
juhosg
9179b1bd6b ar71xx: fix build error if PCI is disabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 21:16:22 +00:00
juhosg
fe2be6a9a3 kernel: update linux 3.3 to 3.3.5
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 20:11:43 +00:00
juhosg
6365d3e544 pxa: remove 2.6.37 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:40:15 +00:00
juhosg
15b93cf7b1 pxa: switch to 3.3 and mark it as broken
It is working in qemu, but it has not been tested on real hardware.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:40:09 +00:00
juhosg
74bfc39816 pxa: add support for 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:40:06 +00:00
jow
d0c031a4f5 atheros: Fix compilation
With our recent switch to the 3.3 kernel target, some headers were
occidentally omitted.

Signed-off-by: Jonathan Bither <jonbither@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:06:39 +00:00
jogo
35009bdf80 bcm63xx: fix a race between PCI bus scan and fallback sprom registration
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.

Fixes #11384.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 21:25:34 +00:00
nbd
d4d537811b kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 21:19:14 +00:00
hauke
126cc381b7 brcm47xx: add gpio_request_one()
This fixes a compile error with kernel 3.3.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 20:44:37 +00:00
nbd
849a172d03 atheros: clean up the patches some more
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 17:15:00 +00:00
nbd
f31721e174 atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 17:08:30 +00:00
jogo
0f0f3b9f5a AR7: don't mark as broken
Linux 3.3.4 boots fine on my AR7 device.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 14:04:19 +00:00
juhosg
91b12f1c40 ar7: remove 2.6.37 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:43 +00:00
juhosg
7d657a9c91 ar7: switch to 3.3 and mark the target as broken
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:41 +00:00
juhosg
02fb20885e ar7: add 3.3 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:39 +00:00
juhosg
1ee5e640f0 ar7: fix kernel_entry extraction
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:36 +00:00
juhosg
0cff4f29f3 ar71xx: add profile and build image for the TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:02:41 +00:00
juhosg
7b820da93e ar71xx: add support for the TP-Link TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31608 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:02:35 +00:00
juhosg
1c9cad5dce ar71xx: update 3.3 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 13:56:35 +00:00
juhosg
c39d550e2f ar71xx: fix a typo in the db120 mach file
Reported-by: Sven Eckelmann <sven@narfation.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 13:56:30 +00:00
hauke
34b32d26b5 brcm47xx: update target to kernel 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 12:53:37 +00:00
juhosg
a6a62009fb linux/2.6.32: R.I.P.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:34 +00:00
juhosg
e3bebfe1fb rdc: remove 2.6.32 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:32 +00:00
juhosg
9ca85294f4 rdc: switch to 3.3 and mark the target as broken
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:30 +00:00
juhosg
7fa6105b4e rb532: remove 2.6.32 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:29 +00:00
juhosg
651eb17ddc rb532: switch to 3.3 and mark the target broken
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:26 +00:00
juhosg
dc1df9e044 rb532: add 3.3 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:23 +00:00
juhosg
321be1fc52 mpc83xx: remove broken flag
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:21 +00:00
juhosg
f3c883c98f mpc83xx: populate network config from an uci-default script
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:19 +00:00
juhosg
109443b2af mpc83xx: cleanup rb333.dts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:16 +00:00
juhosg
d5816c8a83 mpc83xx: fix MAC addresses on the RB333
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:13 +00:00
juhosg
5dad28165e mpc83xx: fix build warnings in RB333/600 dtb wrappers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:10 +00:00
juhosg
796592856f linux/2.6.32: fix layer7 patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 07:20:13 +00:00
kaloz
73229f8d12 [omap4]: upgrade to 3.3, enable framebuffer
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 21:51:58 +00:00
jogo
4e31867a39 adm5120: add missing NULL terminator to partition parser list
Fixes #11372.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 21:03:50 +00:00
hauke
14f0acdc28 brcm47xx: add support for kernel 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 20:18:41 +00:00
juhosg
9d3fb21d4a Fix iptables abuse of kernel header files. Use exported headers instead.
[juhosg: export xt_layer7.h for all kernel versions]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 09:43:10 +00:00
juhosg
439a47e380 ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 19:17:59 +00:00
juhosg
1f249922ce ramips: Make serial console for DIR-300-B1 work again
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 19:17:58 +00:00
juhosg
371f652cf1 mpc83xx: remove 2.6.36 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:26 +00:00
juhosg
d316e764cb mpc83xx: switch to 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:25 +00:00
juhosg
01415999cf mpc83xx: add support for 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:22 +00:00
juhosg
4b296a3cb3 linux/3.3: add more missing symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:19 +00:00
florian
a1c9b29340 [brcm63xx] use a define for the poll and debounce interval
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 15:40:26 +00:00
juhosg
c5006eede0 linux/3.3: add more missing symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-01 08:00:26 +00:00
juhosg
a12fd13e23 move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-01 08:00:25 +00:00
kaloz
7e7649baa9 [coldfire]: switch to 2.6.38
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31546 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-01 07:00:17 +00:00
juhosg
e51f7c5d1b kernel: update linux 3.3 to 3.3.4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-30 08:38:11 +00:00
juhosg
1cfcccb5b0 linux: rtl836x: add a generic reset_switch function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:31 +00:00
juhosg
5df734f0bc linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:29 +00:00
juhosg
1dcdbf2d3f linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:26 +00:00
juhosg
f07500066e ar71xx: allow to disable link polling on unused PHYs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:24 +00:00
juhosg
b20dcb287e rb532: remove 2.6.35 support
The generic 2.6.35 support has been remove long time ago.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 16:56:07 +00:00
juhosg
8ca642965f linux/3.3: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 16:56:03 +00:00
juhosg
be6aa90ec2 rdc: add 3.3 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:59:49 +00:00
juhosg
8e06d437aa mpc85xx: add support for 3.3
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:55:28 +00:00
juhosg
c3bfb23a87 orion: add 3.3 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:20:40 +00:00
juhosg
418e0144a0 linux/3.3: yet another missing symbol
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:08:24 +00:00
juhosg
d2863cfd2d linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:08:22 +00:00
juhosg
3adac4c8e4 mpc85xx: add kmod-booke-wdt to the default packages
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:38 +00:00
juhosg
e4a752ed29 mpc85xx: don't override CONFIG_WATHCDOG
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:36 +00:00
juhosg
95fc5670e1 linux: move CONFIG_BOOKE_WDT to the generic config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31520 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:34 +00:00
juhosg
afab35ea6e linux/2.6.36: R.I.P.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31519 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:33 +00:00
juhosg
b2fc0c6423 linux: add broken flag to targets which are using 2.6.36
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:32 +00:00
juhosg
3fa6652791 adm5120: create a new subtarget for the RB1xx devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:46 +00:00
juhosg
d50d82ab6e adm5120: share a common kernel config between the subtargets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:44 +00:00
juhosg
0c3e51f31c adm5120: merge 3.3 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31511 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:43 +00:00
juhosg
71b94eaba4 adm5120: remove 2.6.32 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31510 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:37 +00:00
juhosg
064b1182e5 adm5120: switch to 3.3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:36 +00:00
juhosg
f2d86d5a21 adm5120: fix macronix bootloc patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:35 +00:00
juhosg
399af78951 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:33 +00:00
juhosg
a7eaf12ead adm8668: merge 3.3 fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28 10:41:43 +00:00
juhosg
d9edbe9c04 adm8668: nuke 2.6.36 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28 10:39:47 +00:00
juhosg
f127c4c7b0 adm8668: switch to 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28 10:38:53 +00:00
florian
8812c9e533 [brcm63xx] switch to gpio-keys-polled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-27 16:44:48 +00:00
juhosg
ccfe94d5e5 linux/3.3: yet another missing symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-27 06:31:43 +00:00
hauke
b2caa2e0b5 brcm47xx: BCMA - Modified PCI CFG space access
The existing code (prior to the patch) does an "ioremap_nocache" on a
subset of a memory region that I think has already been mapped, and then
un-maps that smaller region when it is finished.

Thanks Nathan Hintz for the patch



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 20:32:17 +00:00
juhosg
fade685a5b adm8668: add support for 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 18:53:49 +00:00
juhosg
b2a1169d98 adm8668: build gzip compressed uImage for testing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 18:53:48 +00:00
juhosg
c363d3b566 adm8668: use a suffix for initramfs images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 18:53:46 +00:00
juhosg
1d61105c25 ar71xx: enable MIB counters in the built-in switch of the AR934x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 13:02:11 +00:00
juhosg
efae7066fc adm5120: remove 2.6.38 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:35 +00:00
juhosg
05735d303b adm5120: add 3.3 support
Partially based on the 3.1 patches by Hartmut Knaack <knaack.h [at] gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:33 +00:00
juhosg
0e8ddda2ee linux/3.3: fix compiler warnings in the plat_nand driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:29 +00:00
juhosg
5d61cfe7e3 adm5120: make 5GXi depends on CPU_LITTLE_ENDIAN
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:26 +00:00
hauke
91a591d328 brcm47xx: A couple of other (inconsequential) BCMA patches
Noticed these while reviewing the code.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 21:56:42 +00:00
hauke
ee396d93e1 brcm47xx: b44 fix workaround detection on some brcm47xx boards
Because of api change of nvram_getenv, the workaround failed to detect the hardware.

Based on patch by b.sander

Fixes #11268.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 20:35:46 +00:00
jogo
50d9e73cdf bcm63xx: drop linux 3.2 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:49:27 +00:00
jogo
7a0767fe77 bcm63xx: drop linux 3.0 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:49:24 +00:00
jogo
30f433f1b9 bcm63xx: switch kernel to 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:49:19 +00:00
juhosg
7318bf5df0 ar71xx: TL-WR741NDv4: add WLAN LED config
On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:38:44 +00:00
jogo
aa09643423 kernel: update linux 3.3 to 3.3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:38 +00:00
jogo
b628e1e894 kernel: update linux 3.2 to 3.2.16
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:35 +00:00
jogo
c2cc410c54 kernel: add some more missing kernel config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:32 +00:00
jow
5deef26972 [generic] enable NF_CONNTRACK_PROCFS for Linux 3.3, required for /proc/net/nf_conntrack (#11339)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 00:55:57 +00:00
juhosg
81896ccacb x86: restore config-default, it is needed for 2.6.39
Reported-by: Thomas Heil <heil@terminal-consulting.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 16:56:08 +00:00
juhosg
4e19be80f8 ramips: rt305x: add support for the UR-336UN board
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 16:56:06 +00:00
juhosg
06add57343 ramips: rt305x: add support for the Asus WL-330N3G board
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 16:56:05 +00:00
florian
fbad451aa0 [malta] switch to 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 12:33:30 +00:00
florian
93bbaa79c6 [malta] add support for 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 12:33:27 +00:00
florian
da04a5b2b3 [uml] switch to 3.3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 12:33:24 +00:00
florian
9b5873bbb0 [uml] add 3.3 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 12:33:19 +00:00
blogic
20486e3d63 [lantiq] Adding wifi eeprom extract for ARV752DPW - Easybox 802
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 09:40:37 +00:00
nbd
038eed6f69 ar8216: enable forwarding of multicast frames to the cpu port on ar8327 (thx, SeG)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 19:19:49 +00:00
claudio
c5151773ad [at91] flexibity: Cleanup the subtarget config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 16:56:10 +00:00
claudio
28aee0e335 [at91] tqma9263: update board definition for 3.x series and fix config choose
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 09:09:53 +00:00
claudio
a559a0ea16 [at91] Remove old netus board definition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 09:09:50 +00:00
juhosg
8480a04b3a ep93xx: remove 2.6.39 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 07:20:55 +00:00
juhosg
1961ecdaf1 amazon: remove 2.6.3{0,2} support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 07:20:53 +00:00
juhosg
8012e885db omap24xx: remove 2.6.38 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31426 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 17:16:40 +00:00
juhosg
b03afdd9be xburst: remove 2.6.36 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 17:03:10 +00:00
juhosg
7672aac1eb malta: remove 2.6.39 and 3.0 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31421 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:56:15 +00:00
juhosg
d4020d23e1 mpc83xx: remove 2.6.32 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31420 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:51:59 +00:00
juhosg
4595ebf495 octeon: remove 2.6.30 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31419 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:45:32 +00:00
juhosg
d71e7bf38e cns3xxx: remove 2.6.31 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31418 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:42:05 +00:00
juhosg
91690a98ac au1000: remove 2.6.39 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31416 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:30:40 +00:00
juhosg
955f287cac x86: remove 2.6.32 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:17:48 +00:00
juhosg
a33f77b6ec ixp4xx: remove 2.6.3{2,8} and 3.0 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:17:46 +00:00
juhosg
407157942b linux/2.6.31: R.I.P.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 15:18:58 +00:00
juhosg
f480dd5941 linux/2.6.30: R.I.P.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 15:18:55 +00:00
juhosg
696e0160a5 linux: add broken flag to targets which are using 2.6.30
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 15:18:54 +00:00
juhosg
3d51befa3b linux/3.3: nuke the gpio_buttons patch
It is superseded by the in-kernel gpio-keys-polled driver.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 14:26:35 +00:00
juhosg
30a263e82e mpc52xx: nuke 3.2 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:36:47 +00:00
juhosg
0e01c6c25c mpc52xx: switch to 3.3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:36:45 +00:00
juhosg
e47ded8763 mpc52xx: add kernel config for 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:36:44 +00:00
juhosg
085e737330 ramips: nuke 3.2 suport
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:53 +00:00
juhosg
caef9edf07 ramips: switch to 3.3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:51 +00:00
juhosg
0f71b77a13 ramips: add support for 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:50 +00:00
juhosg
e958af1110 ramips: rt305x: add OHCI/EHCI registration code for RT3352
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:48 +00:00
juhosg
3ff5d8da9a ramips: rt305x: fix CPU clock detection on RT3352
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:47 +00:00
juhosg
feaef768b3 ramips: rt305x: use different memory size setup for RT3352
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:45 +00:00
juhosg
fe6030a2b7 ramips: rt3883: add profile and build sysupgrade image for the RT-N56U
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31399 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:44 +00:00
juhosg
219147642d ramips: add swconfig to the default package list
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31398 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:43 +00:00
juhosg
dbbeae59d9 ramips: build initramfs image for the Fonera 2.0N
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:42 +00:00
juhosg
266880e202 ramips: rt305x: add initial support for Tenda W306R V2.0
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:40 +00:00
juhosg
ca5d81b44b ramips: remove hardcoded console parameter from kernel configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:30 +00:00
juhosg
ad4f6bb570 linux/3.3: fix crypto4xx build failure
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 10:47:04 +00:00
mirko
d2aa64852c [target/linux/lantiq] change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board
The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 08:07:21 +00:00
juhosg
ff6ac1157f ppc40x: nuke 3.2 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 21:03:15 +00:00
juhosg
aa10a3949f ppc40x: switch to 3.3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31386 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 21:03:14 +00:00
juhosg
2beb37f70d ppc40x: sync 3.3 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 21:03:12 +00:00
juhosg
500fc02a8c ar71xx: remove duplicated AP121 Kconfig entry
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 16:50:16 +00:00
juhosg
7cb5b54352 cns21xx: remove 3.2 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 15:25:00 +00:00
juhosg
4e4fcd70ed cns21xx: switch to 3.3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 15:24:59 +00:00
juhosg
312e64a8db cns21xx: add support for 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31379 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 15:24:57 +00:00
juhosg
bbdc13d47f linux/3.3: update ARM mach-types
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 15:24:54 +00:00
claudio
7cd6ca236b [generic] Add a missing symbol for config-3.3
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31373 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 13:33:04 +00:00
claudio
bb81a4d728 [at91] Reorganize the subtargets, group subtargets per cpu family
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31372 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 13:33:01 +00:00
claudio
b3f6f7ff37 [at91] Update the kernel to 3.3.x series, remove patches that doesn't apply anymore
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31371 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 13:32:55 +00:00
claudio
4280ba74a9 [at91] Ensure that the bin directory exists before copy the files
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 13:27:16 +00:00
florian
a7429453a2 [kernel/2.6.30] remove some annoying warnings and fix snd modules build
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31365 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 13:25:26 +00:00
florian
feabb87abb [ps3] add missing config symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 13:25:23 +00:00
juhosg
f9f658a530 ar71xx: nuke 3.2 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31360 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:32:05 +00:00
juhosg
7bc7a250f8 ar71xx: switch to 3.3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31359 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:58 +00:00
juhosg
681746fbaa ar71xx: sync 3.3 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31358 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:53 +00:00
juhosg
e386148a35 ar71xx: merge/reorganize 3.3 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31357 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:50 +00:00
juhosg
a17e6cf40e ar71xx: use ap91_pci_init for RB751{,G}
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31356 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:48 +00:00
juhosg
9b7ceff90a ar71xx: move USB device registration directly into rb751{,g}_setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31355 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:43 +00:00
juhosg
e25325e131 ar71xx: add ap9x_pci_get_wmac_data helper
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:42 +00:00
juhosg
9ec35a5650 ar71xx: add sanity checks to decode_rle
Also use -EINVAL instead of -1.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:40 +00:00
juhosg
4cb60d0721 avr32: remove old kernel support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:23:07 +00:00
juhosg
d9a647fd52 avr32: switch to 3.3.2
uClibc-0.9.33 causes segfaults at least in iptables.
The segfaults are present with 2.6.39 as well, so it
makes no sense to stick to that version.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31351 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:23:02 +00:00
juhosg
a763bce8ce avr32: sync kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31350 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:22:50 +00:00
juhosg
5a9adfafdb avr32: fix atomic64_t related kernel build errors
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:22:48 +00:00
florian
9fddeaf113 [cobalt] switch to 3.2.15
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-18 15:36:33 +00:00
florian
b102b5224f [generic] fix 335-mips-kexec patch for all 3+ kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-18 15:36:30 +00:00
jogo
b1f5b99f53 kernel: x86: also update subtarget kernel versions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17 21:01:43 +00:00
jogo
86acf4fb40 kernel: also update the targets to use 3.2.15
Thanks Gabor for spotting it.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17 13:12:14 +00:00
jogo
4f72aeefd8 kernel: update linux 3.3 to 3.3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17 12:51:02 +00:00
jogo
d1f448b466 kernel: update linux 3.2 to 3.2.15
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17 12:50:54 +00:00
jow
e07815ad41 [geos] bump to Linux v3.3.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 15:04:47 +00:00
jow
2ea2df1011 Fix bufferbloat in PPPoATM TX queue
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 15:04:45 +00:00
jow
b497447c4e Update ppp TX restart patch to avoid race condition
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 15:04:44 +00:00
blogic
86598e6363 [lantiq] adds 3.3 patches and files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 12:31:48 +00:00
florian
ab1585c224 [kernel/2.6.32] backport missing platform data members for gpio-keys
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 12:09:15 +00:00
florian
dfad2f5e19 [kernel/2.6.32] backport a missing eeprom 93cx6 define for building rt2x00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 12:09:13 +00:00
florian
f1c5e9e9b3 [rdc] add missing debugging symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 11:38:35 +00:00
florian
2a2c7fc0b5 [kernel/2.6.32] add missing debugging symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 11:38:33 +00:00
florian
6a6938a637 [rb532] mark set but unused variables as such
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-15 18:53:48 +00:00
florian
2b011556a5 [rb532] refresh 2.6.32 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-15 18:53:45 +00:00
florian
6ca18c5ae1 [rdc] refresh 2.6.32 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-15 18:53:42 +00:00
florian
ff728c1e81 [generic/2.6.32] silence an annoying x86 warning
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-15 18:53:39 +00:00
hauke
4237832ef0 at91: Missing kernel config symbols for AT91 target platform
I looked into buildbot snapshots and noticed that some platforms have 
not successfully compiled for a long time. One example is at91, which 
seems to be missing device-related kernel config symbols and the 
snapshot build crashes already there.

Please find attached a patch that makes the at91 kernel config and 
build to succeed again.

Signed off by: hannu.nyman@iki.fi


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-15 09:50:51 +00:00
hauke
6f210a8c76 brcm47xx: fix a bug in the sprom handling of bcma, this broke all bcma based SoCs.
bcma: use fallback sprom if no on chip sprom is available


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-14 12:12:22 +00:00
hauke
1e83690598 kernel: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-13 19:37:15 +00:00
hauke
4ad28d6429 kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-13 19:35:40 +00:00
hauke
263228328e brcm47xx: remove support for kernel 3.0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-13 16:53:16 +00:00
nbd
2ff0c7f129 ixp4xx: add support for linux 3.3.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-13 13:38:49 +00:00
nbd
549a939951 kernel: fix arm compressed images build on mac os x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-13 13:38:45 +00:00
jow
7fe2f385bb PATCH: Disable console terminal in Grub for alix2 target
The alix2 target has the VGA console for grub enabled by default. This
prevents the grub menu from appearing on bootup. It is disabled by
default for the other embedded x86 platforms. This patch corrects that
behavior for the alix2 target.

Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-12 23:30:27 +00:00
blogic
9e31085943 [lantiq] update 3.2 patches
sync with lantiq kernel series

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-12 12:33:56 +00:00
jow
887ba518f7 [omap35xx] remove preconfig variables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-12 09:43:43 +00:00
jow
47867f8a84 [ps3] remove preconfig variables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-12 09:43:41 +00:00
jow
b1ba3fb620 [x86] add missing Kernel symbol spotted by buildbot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-10 10:09:27 +00:00
kaloz
3f71dabad1 [generic/3.3]: add missing symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 17:03:02 +00:00
jogo
57a6b42c70 kernel: update linux 3.3 to 3.3.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31223 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 14:48:56 +00:00
jogo
bbb153176f kernel: update linux 3.2 to 3.2.14
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 14:48:51 +00:00
jogo
21fcfbb1a2 kernel: add some more additional missing config symbols for 3.2 and 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 14:48:46 +00:00
mirko
729010e333 [target/xburst] level up target xburst to linux kernel version 3.2.1
Thanks to the qi-hardware project - especially to Lars, Maarten and Xiangfu

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-08 12:09:52 +00:00
juhosg
8b09b5ce75 ar71xx: image: build initramfs images for the WHR boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:08 +00:00
juhosg
87485f3a88 ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:07 +00:00
juhosg
4afe9df355 ar71xx: add rb750 to diag.sh
Support status led in diag.sh for RB750

Patch from: Evangelos Arkalis <arkalis.e@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:04 +00:00
blogic
a73a270eb0 [lantiq] add Easybox 802 - ARV752DPW
Implements the ARV752DPW architecture in mach-arv.c

Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-05 20:03:21 +00:00
blogic
b13c35b00f [lantiq] enable usb on dgn3500
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse.

Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31205 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-05 20:03:19 +00:00
florian
8948cb2814 [orion] generic: use magic_long in sysupgrade
Signed-off-by: Matthias Bücher <mail@maddes.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31200 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 16:06:29 +00:00
florian
c0ade48327 [orion] update wrt350nv2-builder to v2.4 and use new functionality for target orion_generic
Signed-off-by: Matthias Bücher <mail@maddes.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31199 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 16:06:25 +00:00
florian
8675646119 [orion] add support for D-Link DNS-323
this patch adds support for D-Link DNS323 storage device.
You can find more info here:

http://dns323.lukaperkov.net/

Currently you need serial cable to flash OpenWrt on DNS-323.

Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net >

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31198 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:55 +00:00
florian
ff7c3c6481 [kernel/3+] add missing DM/MD config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31197 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:52 +00:00
florian
f4c6500322 [adm5120] fix typos in adm5120 switch driver (#4241)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31196 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:15 +00:00
florian
1a38049d59 [adm5120] add Edimax specific MAGIC_MAC_BASE to read MAC from flash (#4241]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:12 +00:00
florian
002c3c6652 [adm5120] fix support for 2.6.38 kernel
This patch fixes the following issues I encountered while compiling kernel 2.6.38.8 for my Omnima Embedded Controller/Edimax BR6104KP:
    - kernel comes up with machine selection during build, even though everything was properly set in menuconfig
    - USB api changes
Successfully built and tested with r29755.

Signed-off-by: Hartmut Knaack <knaack.h [at] gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:09 +00:00
florian
afad2e49db [adm5120] refresh 2.6.38 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:07 +00:00
florian
0432b2b9b9 [kernel/2.6.38] fix gcc-4.6 set but unused warnings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:04 +00:00
florian
0d6d67e4b9 [kernel/2.6.38] refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:01 +00:00
jogo
f21c103e5a kernel: update linux 3.2 to 3.2.13 and refresh patches
Also remove a duplicate patch from lantiq (already in generic).

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-01 07:56:55 +00:00
jogo
1efef1fe09 kernel: add some more missing kernel symbols for 3.2 and 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31157 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-01 07:56:49 +00:00
jogo
c96723ae75 kernel: add some more missing serial 8250 config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-30 08:11:01 +00:00
jow
8600b97ee6 ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29 16:03:04 +00:00
hauke
62249258d3 brcm47xx: fix memory leak, backport from the mainline kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29 15:44:06 +00:00
hauke
180c221031 brcm47xx: add missing breaks into the nvram read code in the switch case statements
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29 15:43:16 +00:00
nbd
5ace2c89ed kernel: restore ebtables functionality by running netfilter hooks when the ebtables module is loaded
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31141 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29 14:15:54 +00:00
jogo
af89f0c95c bcm63xx: enable bcm6368 for linux 3.3 and build images
Only build bcm6368 images when building for linux 3.3.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:37 +00:00
jogo
b8d5619ca8 bcm63xx: add initial support for bcm6368 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:34 +00:00
jogo
03e726c2ae bcm63xx: add driver for the internal hw trng on bcm6368
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:30 +00:00
jogo
769a390d81 bcm63xx: replace SPI driver with latest upstream version
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:25 +00:00
jogo
9bb8c69134 bcm63xx: add ethernet support for bcm6368
Add basic support for the internal ethernet switch on bcm6368. It behaves
as a dumb switch for now, but allows basic connectivity.

Also drop the ethernet patch for bcm6345 for now, it needs rework.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:20 +00:00
jogo
c5a8e48574 bcm63xx: add missing bits from extirq support
Add missing external IRQ code parts for older chips in the new code.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:15 +00:00
jogo
f3b449288b bcm63xx: reorder patches
Reorder patches for a clearer distinction between the purposes of
the different patches.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:09 +00:00
hauke
d2f6c11460 brcm47xx: update flash drivers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 17:03:18 +00:00
mirko
af3d648420 Revert commit 31091 - "[target/xburst] remove set but unused variable which leads into compiling errors with GCC >= 4.6.0"
'set-but-unused-variable'-issues are dealt with in a generic way now

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 15:28:21 +00:00
mirko
10c82db728 [target/generic] deal with 'set-but-unused-variables' in a more generic way
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 15:28:13 +00:00
hauke
e32d309b26 brcm47xx: BCMA - Consolidate/reduce code in bcma_device_name
Eliminate unneeded procedure by incorporating code into bcma_device_name

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 09:36:50 +00:00
hauke
98aade835d brcm47xx: BCMA - Always map 4 bytes
This probably doesn't matter, but reads/writes are always 4 bytes, so always map 4 bytes.

Changes since v1: Moved changes to new patch file (234-bcma-always-map-4-bytes.patch).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 09:35:01 +00:00
juhosg
7bc411c5d9 ar71xx: boost SPI flash read performance
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:17 +00:00
juhosg
ac19ad9ae4 ar71xx: improve SPI flash read/write performance
mtd_speedtest results:

                        page write speed
                    old         new       delta
DB120            209 KiB/s   226 KiB/s     +8.13%
TL-WR1043ND v1   122 KiB/s   148 KiB/s    +21.31%
TL-WR703N v1     153 KiB/s   194 KiB/s    +26.80%
TL-MR3220 v1     130 KiB/s   156 KiB/s    +20.00%
TL-WR2543ND v1   158 KiB/s   202 KiB/s    +27.85%
TL-WR741ND v2    122 KiB/s   152 KiB/s    +24.59%
ALFA AP96        229 KiB/s   260 KiB/s    +13.54%
WNDR3700         202 KiB/s   223 KiB/s    +10.40%

                         page read speed
                    old        new       delta
DB120            691 KiB/s   929 KiB/s    +34.44%
TL-WR1043ND v1   372 KiB/s   754 KiB/s   +102.69%
TL-WR703N v1     375 KiB/s   745 KiB/s    +98.67%
TL-MR3220 v1     372 KiB/s   752 KiB/s   +102.15%
TL-WR2543ND v1   307 KiB/s   564 KiB/s    +83.71%
TL-WR741ND v2    315 KiB/s   525 KiB/s    +66.67%
ALFA AP96        515 KiB/s   702 KiB/s    +36.31%
WNDR3700         515 KiB/s   697 KiB/s    +35.34%

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:15 +00:00
juhosg
ad01160aa2 ar71xx: image: build initramfs images for more boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:13 +00:00
juhosg
bba495fb6f ar71xx: image: add MkuImage{Gzip,Lzma}/initramfs helpers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:11 +00:00
juhosg
3b5a6363a0 ar71xx: image: pass mtdlayout variables by value
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:10 +00:00
juhosg
9f6d45184a ar71xx: image: use MkuImageGzip in Image/Build/AthGzip/initramfs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:08 +00:00
juhosg
32fd04f49a ar71xx: remove the built-in MTD map of the AP96 board
Pass the mtd_layout via the kernel command line instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:07 +00:00
juhosg
514a769538 ar71xx: remove the built-in MTD map of the PB92 board
Pass the mtd_layout via the kernel command line instead

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:05 +00:00
juhosg
5ca96e340c ar71xx: remove the built-in MTD map of the Zcomax devices
Pass the mtd_layout via the kernel command line instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:04 +00:00
juhosg
5ba8709ee9 ar71xx: reclaim the 'user_property' partition on WHR-* boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:02 +00:00
juhosg
e27017a728 ar71xx: remove the built-in MTD maps of several boards
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:

 * AP113
 * ALFA N2/N5
 * DIR-600
 * DIR-615
 * DIR-825
 * TEW-6{3,5}2BRP
 * TEW-673GRU
 * WHR-G301N
 * WHR-HP-GN
 * WHR-HP-G300N

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:01 +00:00
juhosg
603bb2bb6e ar71xx: use modules for LED triggers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:59 +00:00
juhosg
52b72cdab7 ar71xx: disable CONFIG_{I2C,SPI}_GPIO
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:53 +00:00
juhosg
6891d42521 ar71xx: sync 3.3 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:52 +00:00
juhosg
70b0829237 ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:51 +00:00
juhosg
7c8edac25f ramips: rt305x: build image for the DIR-615 rev D boards
Patch from #10105.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:29:59 +00:00
juhosg
467d4cf199 ramips: rt305x: add add support for the Asus WL-330N board
[juhosg: reorder several lines in order to keep things sorted
alphabetically]

Signed-off-by: Frédéric Leroy <fredo@starox.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:29:57 +00:00
florian
87dc5ab9db [generic] ppp: Fix high softirq utilization with pppoa
Users of the Geos platform are reporting high CPU utilization.
This seems to be rooted in a problem with the TX queue restart in PPP.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 17:47:44 +00:00
florian
26a7be32ea [kernel/3.3] add missing INET_UDP_DIAG symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 17:47:41 +00:00
florian
52a44a70ae [x86] geos: add 'tc' and kmod-sched for bonding
The Geos2 includes 2 ADSL+ interfaces, and as such it needs to have the TEQL scheduler for bonding.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 17:47:37 +00:00
hauke
550b5a8a06 brcm47xx: update sprom patches like they are in the mainline kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 17:07:28 +00:00
mirko
82d90cbeb1 [target/xburst] remove set but unused variable which leads into compiling errors with GCC >= 4.6.0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 16:29:19 +00:00
hauke
93a0a2c288 brcm47xx: update usb driver to the version send for mainline kernel integartion
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 15:38:56 +00:00
nbd
9f0871090d ath9k: make endian check optional
Turns out it triggers on some AR71xx devices where no swapping should be done.
Enable endian check for the lantiq target.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 13:21:53 +00:00
blogic
5da154a599 [lantiq] cleanup atheros wifi handling
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:38 +00:00
blogic
cc457ef6dc [lantiq] cleanup image makefile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:32 +00:00
blogic
5e588d2fdb [lantiq] update /etc/uci-defaults/*
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:30 +00:00
blogic
437ba8c432 [lantiq] update profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:27 +00:00
blogic
4c8d6ad4d0 [lantiq] bump kernel to 3.2.12
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:09 +00:00
blogic
61a78f8450 [ar8216] fixes breakage introduced in 776722ce36ac95877efb7fd771dde2f6ffc96433
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-22 13:07:34 +00:00
ryd
0e4c67b63a Disable keyboard for x86 default config - revoke patch 30966
This was already fixed by commit 30309 and is part of generic x86 target.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31052 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-21 19:10:02 +00:00
juhosg
3a64a2209c linux: refresh patches against 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31047 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-20 15:55:07 +00:00
juhosg
4da38bec42 linux/3.{2,3}: yet another missing NET_VENDOR symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-20 15:55:04 +00:00
juhosg
281c1076f3 ar71xx: fix IRQ number for the AR7240 OHCI controller
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-20 15:02:48 +00:00
jow
b0439c1a11 [rdc] base-files: gracefully handle empty variables in preinit (#11155)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 20:37:12 +00:00
juhosg
77ec3b2de9 kernel: update linux 3.2 to 3.2.12
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31028 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 18:23:31 +00:00
juhosg
36a8c139f1 ar71xx: disable unused file system drivers in the nand subtarget
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:07 +00:00
juhosg
6c06680875 ar71xx: sync kernel configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:06 +00:00
juhosg
fd48e871d0 ar71xx: add initial support for RB750GL
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31025 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:04 +00:00
juhosg
c8aab4b6c2 ar71xx: make rb750_latch_change 'static void'
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31024 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:03 +00:00
juhosg
58ce76e6b5 ar71xx: add latch_change field to rb750_led_platform_data
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31023 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:01 +00:00
juhosg
e929396e19 ar71xx: add platform data for the RB750 NAND driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:56:59 +00:00
kaloz
e318fce641 [ppc44x]: upgrade to 3.2, disable ppp by default until we figure out why ppp_generic breaks bootup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31020 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:27:34 +00:00
kaloz
9afed7a1a0 [generic]: add missing Kconfig symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:26:15 +00:00
juhosg
bbdc83e3fc ar71xx: use a different pll value on DB120
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:11:22 +00:00
juhosg
1a9e33b337 ar71xx: add AR934x specific interface speed setup for ge0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:11:20 +00:00
juhosg
912934742d ar71xx: remove static MTD maps from AP121/DB120 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:11:19 +00:00
nbd
c746848b47 targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 09:58:13 +00:00
juhosg
1430d7ad5e ar71xx: use AR8327 on the DB120 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:58 +00:00
juhosg
17df14bf19 generic: ar8216: add support for the AR8327 chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:55 +00:00
juhosg
a79728bb5c generic: ar8216: allow to use more ports
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:51 +00:00
juhosg
3f02078b26 generic: ar8216: reorder chip specific functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:48 +00:00
juhosg
28857571f7 generic: ar8216: reorder switch_dev specific functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:45 +00:00
juhosg
bc46e3f21c generic: ar8216: use ar8216_sw_ prefix for switchdev related functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:42 +00:00
juhosg
76c970bba3 generic: ar8216: use switch_dev->ports in for loops
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:40 +00:00
juhosg
6db6793b7a generic: ar8216: add read_port_status field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:39 +00:00
juhosg
c4c471bd64 generic: ar8216: add init_globals field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:36 +00:00
juhosg
30a5115c48 generic: ar8216: add caps field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:33 +00:00
juhosg
c097ab2bbd generic: ar8216: add vtu_load_vlan field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:30 +00:00
juhosg
6934b97c4e generic: ar8216: add vtu_flush field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:26 +00:00
juhosg
d29edcf013 generic: ar8216: add init_port field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:23 +00:00
juhosg
9aeb2624ac generic: ar8216: add setup_port field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:19 +00:00
juhosg
f54b65f008 generic: ar8216: add hw_init field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:15 +00:00
juhosg
5e670215a9 generic: ar8216: add a separate structure for chip specific stuff
Also add a hw_init function into that.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:12 +00:00
juhosg
b9fa24dba2 generic: ar8216: rename chip field of struct ar8216
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:08 +00:00
juhosg
166dc561a1 generic: ar8216: move ar8216_id_chip function
Also remove the inline annotation.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:05 +00:00
juhosg
b7facc3842 generic: ar8216: rename ar8216_ops to ar8216_sw_ops
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:03 +00:00
jow
54bd644e36 [x86] alix2: add require crypto kmods (#10410)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 18:56:02 +00:00
juhosg
ba7e10c7ec cns21xx: build uImage for the NS-K330
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 12:07:56 +00:00