1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-14 18:21:32 +02:00
Commit Graph

2211 Commits

Author SHA1 Message Date
juhosg
69a5f0766e [adm5120] add missing PCI irq map for the RouterBOARD 133 (closes #2431)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-26 17:05:16 +00:00
juhosg
58e6e8c434 [adm5120] remove unused PCI externs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-25 13:45:57 +00:00
juhosg
d70f76b1dd [adm5120] fix initcall level of adm5120_board_setup()
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-25 13:42:45 +00:00
juhosg
38e3914d5b [brcm-2.4] fix vlan configuration on Dell TrueMobile 2300
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-25 08:34:30 +00:00
florian
1cf58b2914 prom_free_memory should be __init
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-24 21:21:18 +00:00
juhosg
6cfe1b25df [adm5120] move pci_irq_map definitions into the board specific files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-24 16:59:23 +00:00
florian
8d27837d9e Fix rb535 revision 5 detection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-24 15:09:10 +00:00
nico
45d02992d9 add ipv6 conntrack support (closes: #2192)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-23 17:22:17 +00:00
nico
2cd399391e move crypto support to a seperate crypto.mk file, split modules into multiple packages and adjust dependencies, sync crypto options in kconfigs.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-23 15:12:12 +00:00
juhosg
d283300b35 [adm5120] fix a copy-paste error
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-23 14:04:46 +00:00
juhosg
327d37a974 [adm5120] add preliminary support for the Mikrotik RouterBOARD 192
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-23 13:11:35 +00:00
juhosg
1ab846c8f0 [adm5120] fix ethernet vlan matrix of the NP28G board (closes: #2387)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-23 13:05:33 +00:00
nico
b47e564474 backport [8862] to pre 2.6.22 kernels as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-23 11:12:54 +00:00
ejka
63c42902d7 add necessary includes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-23 08:13:08 +00:00
blogic
23334c5281 added option to atheros kernel to be able to disable reset button from inside the fon mp3 driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-23 00:32:31 +00:00
nbd
a4ae1d5559 make ATM_DRIVERS default to n
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8967 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-22 23:36:37 +00:00
nico
937629f197 add missing 2.6 conntrack/nat helpers, add 2.6 conntrack/nat helper for RTSP (closes: #2297, thanks to aorlinsk), sync 2.4 / 2.6 kconfigs.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-22 18:37:24 +00:00
nico
a8265302c3 refresh brcm-2.4 kconfig
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-22 15:06:15 +00:00
nico
09f25ee69c set CONFIG_JFFS2_FS_DEBUG=0 in generic 2.4 kconfig
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-22 15:03:39 +00:00
rwhitby
d889dbeb9e Build both NPE-B and NPE-C microcode for the fsg-3 and other dual-ethernet ixp4xx devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-21 23:32:40 +00:00
juhosg
202118260a [adm5120] rename NAND driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-21 19:00:45 +00:00
juhosg
7472625106 [adm5120] use prepare_generic_squashfs in image generation, thanks ffrrrr
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-21 17:13:51 +00:00
ejka
1346f7147a add initial generic gpio-leds support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-21 14:04:29 +00:00
ejka
35a0fb9185 make gpio conformant to generic gpio spec.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-21 12:37:50 +00:00
juhosg
1533187684 [adm5120] checkin a new, experimental USB driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-21 07:32:19 +00:00
juhosg
183b782e0e [adm5120] fix description of Kconfig option for the Macronix flash chips boot-location fixup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-21 07:29:34 +00:00
juhosg
3645318c0d [adm5120] clean up jffs2 config options
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-21 07:24:13 +00:00
matteo
41497a5586 fix silliness in [8886]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-20 19:46:58 +00:00
matteo
81df3b167a replace deprecated u_char with u8
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-20 19:33:00 +00:00
matteo
b377dac440 Make ar7_part more readable and endianness safe
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-20 19:25:38 +00:00
matteo
b37fa14eed small cpmac fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-20 16:31:23 +00:00
matteo
ddfe3fac99 remove useless dependency
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-20 16:20:40 +00:00
rwhitby
ecd9e20a51 Add reiserfs module and include it in the FSG-3 profile.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-20 11:11:41 +00:00
nbd
0829b438bb remove two ip6t modules on linux 2.4, because they're causing conflicts with ipv4 stuff
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-20 10:10:01 +00:00
nico
876dffc71b build IPsec transports as modules, rename kmod-ipip to kmod-iptunnel4 and add kmod-iptunnel6.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-20 10:03:41 +00:00
ejka
ba7d1c517e use set_irq_chip_and_handler (#2408)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-20 02:22:03 +00:00
matteo
945335ea40 style cleanups (make checkpatch.pl happy)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-19 23:27:34 +00:00
nbd
de5584e77a clean up jffs2 config options
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-19 20:58:16 +00:00
nbd
86af2c87cf enable jffs2 summary for faster mount time
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-19 20:43:31 +00:00
blogic
f3aa8f5895 made HOME=/root global instead of x86 specific
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-19 19:58:07 +00:00
blogic
2e0e79b882 root users folder is now in the fs and no longer /tmp
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-19 19:51:11 +00:00
ejka
a0e3d6be3e cleanup (use dma API, use accessors, debugging/printk cleanup)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8839 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-19 12:58:12 +00:00
ejka
5d895bb0b3 We have generic irqs now.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-19 00:52:40 +00:00
nico
cd1b974a1f merge 3G usb serial card patches and move it at 802
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-17 15:22:12 +00:00
matteo
351a3d1a64 detect ar7 at runtime in set_except_vector and remove useless volatile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-17 12:45:38 +00:00
blogic
80bb6dbe32 changed the timeout for grub to load the menu from 10 secs to 2 secs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-16 21:03:04 +00:00
nico
fc91d8b69a rename packages dependecies missed from [8806]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-16 19:21:23 +00:00
nico
3cd053e7cc rename kmod-libata to kmod-ata-core, add some missing descriptions, sort and cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-16 19:09:01 +00:00
florian
b434998040 Add support for the D-Link DIR-450, thanks to Macpaul Lin !
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-16 10:57:29 +00:00
rwhitby
335f0ca48e Moved config back to config-default, but left the FSG3 profile config non-working in the config directory as a reminder that it has to be changed over to the new scheme when that's ready.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8779 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-14 21:37:08 +00:00
matteo
207b52f838 don't broke other archs, we're close to mainstream (i hope)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8778 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-14 20:26:54 +00:00
rwhitby
bc151c9dac Reinstated the kernel configuration for the FSG3 profile.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8776 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-14 13:26:11 +00:00
ejka
27ab715e19 fix previous commit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8774 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-14 05:30:11 +00:00
ejka
7c21609c5c add *dma_mask's to cpmacs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8773 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-14 04:49:47 +00:00
ejka
2c3ecd000e fix watchdog seek test (#2383)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8772 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-14 04:46:34 +00:00
juhosg
9353ef4694 [adm5120] image generation fixes, thanks to <berny156 at gmx.de> (#2379)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8771 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-13 16:54:51 +00:00
ejka
723f41a908 fix CAC_ADDR/UNCAC_ADDR macros
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-13 07:16:26 +00:00
ejka
09aef5280e mmzone.h is not needed anymore
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-13 07:07:46 +00:00
ejka
0f2cb4d578 128 irqs is not enough...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8768 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-13 06:21:27 +00:00
ejka
ecb2219233 copy-paste typo, lost static's
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8767 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-13 06:20:29 +00:00
matteo
d127ad9238 use ebase instead of CAC_BASE, some cosmetic fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-12 17:48:46 +00:00
matteo
82b6ff28f0 Enabled working ar7_wdt, style cleanups
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-12 16:15:12 +00:00
matteo
91d6f27676 added ar7_wdt fix by Alex
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-12 15:30:00 +00:00
matteo
969318c24f Style fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8761 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-12 13:21:02 +00:00
ejka
1fe90486fd there is no need in two identical actions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8760 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-12 12:27:06 +00:00
ejka
fc58f2fd75 vlynq cleanups:
* drivers can now set a clock divisor
 * irq handling cleanup, drivers now can handle error irqs themselves
 * style cleanup


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8759 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-12 12:23:56 +00:00
matteo
769621dec9 more AR7 cleanups & fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8758 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 23:50:02 +00:00
matteo
53c6d224b0 no memset after kzalloc
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8757 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 22:40:06 +00:00
matteo
6485c8ba0a AR7: Cleanups (closes: #2323)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 21:19:57 +00:00
juhosg
02c9cd2369 [adm5120] rewrite image generation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 17:55:08 +00:00
nico
642f601416 disable dsp freq use for vlynq bus clock init, disable external clocking (it locks up on c54apra2+) and revert to internal clocking trying various clock divisors.
cleanup:
 * remove volative and use readl & writel accessors instead
 * use set_irq_chip & friends for irq setup
 * use kzalloc instead of kmalloc
 * secure VINT_VECTOR macro argument
 * remove unused vlynq_local_id function



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 14:50:43 +00:00
nico
02d92d36c7 fix target names in image options (closes: #2357)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 14:04:34 +00:00
nico
6f9c59a813 fix typo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8747 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 13:44:55 +00:00
ejka
75eb95a12c Style cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8746 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 13:42:23 +00:00
ejka
6e3ad40d8a Style cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8744 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 13:18:51 +00:00
ejka
2850c28229 AR7: IRQ handlng cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8743 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 13:07:52 +00:00
florian
35881dd173 AR7 will also be running in big-endian on zyxel devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8741 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 06:43:59 +00:00
florian
6cdcb18a05 Remove useless EXTRA_CFLAGS stuff
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8740 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 06:43:27 +00:00
florian
64f35b6ef8 Fix comments to the mtd driver (see http://www.linux-mips.org/archives/linux-mips/2007-09/msg00064.html)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-11 06:32:05 +00:00
florian
ddd659f540 Rearrange patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8729 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-10 14:19:56 +00:00
juhosg
cc966472c3 [adm5120] fix memory size detection (#2244)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-10 09:54:35 +00:00
florian
c89d2f226c Add preliminary support for sysupgrade on brcm
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 19:18:02 +00:00
florian
4577be5482 Add Merlin XU870 (#1303)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 18:21:36 +00:00
blogic
eb34b5dcf0 fixes menuconfig selection of grub for x86 targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 18:00:00 +00:00
juhosg
6c0eb0af8c [adm5120] use the global register access macros in the flash driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 13:28:24 +00:00
juhosg
9b5bc78c64 [adm5120] remove volatile derefs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 12:54:11 +00:00
juhosg
aa10218a50 [adm5120] cleanup memory detection code, fix #2244
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 12:50:32 +00:00
juhosg
f9d0242a80 [adm5120] define more SWITCH/MPMC constants
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 12:45:49 +00:00
juhosg
5798228110 [adm5120] remove redundant EXTRA_AFLAGS
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 12:40:44 +00:00
juhosg
2bc788fc0d [adm5120] cleanup IRQ code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 07:33:33 +00:00
juhosg
70cd6b2ff5 [adm5120] cleanup PCI code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 06:41:19 +00:00
nbd
793b301c8c more config changes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 00:24:08 +00:00
nbd
5707a83b51 oops. forgot to move the config around for x86
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 00:22:33 +00:00
nbd
ceee90ffd2 adapt profiles for subtarget changes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 20:04:43 +00:00
nbd
6db7ad74f6 major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 19:55:42 +00:00
nbd
c8bff13a74 fix pci init for brcm-2.4 with atheros wifi cards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 13:39:34 +00:00
florian
f8bae64622 Add some EHCI related symbols when usb is selected
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 10:28:18 +00:00
ejka
9fab1ed49b Use PHYS_OFFSET.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 09:16:30 +00:00
ejka
6eff87f648 Add TNETW1350 to known devices. Style cleanups.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 09:02:44 +00:00
juhosg
76d2050b37 [adm5120] fix the symlink of the lzma-loader
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 06:52:52 +00:00
nico
4aac3b42a2 cosmetic fixes for ar7: indent, use lowercase hex notation, format
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 19:35:08 +00:00
nbd
a8c9d0167e remove some obsolete files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 16:40:36 +00:00
nbd
17c7b6c3fd strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 16:27:37 +00:00
florian
3390eccc6e Disable the USB clock for now, will be used later for the AR7-HCD driver, which is not ready (#1858)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 11:45:35 +00:00
nico
ba0c7dab52 suppress warning in gcd()
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8609 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-04 13:23:21 +00:00
nico
1d1cb9fb51 use kernel abs(), remove recursion in gcd() (closes: #2307)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8608 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-04 10:44:45 +00:00
nico
e0cedcbc75 use constant for clock values (closes: #2306)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-04 10:27:32 +00:00
nico
2d65dbf431 rename 2.6 high-speed usb serial fix to match 2.4 one
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-02 14:20:11 +00:00
nico
84fc36a443 add high-speed usb serial fix from Junxion to 2.4 kernel too (closes: #2274)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-02 14:18:28 +00:00
nico
947d2b4338 small rdc-2.6 fixes (from sn9, thanks!)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-01 05:25:44 +00:00
nico
4e6fd1b0dc build eeprom_93cx6 as a module, add a KernelPackage for it and for crc-itu-t
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-30 22:19:26 +00:00
nico
8c1de14503 add high-speed usb serial fix from Junxion (closes: #2274)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-30 16:04:31 +00:00
juhosg
0840c2ef25 I have new e-mail address. Thanks to Kaloz ;)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-29 17:27:11 +00:00
juhosg
49d892e8f8 [adm5120] simplified image file generation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-29 16:31:49 +00:00
florian
2dcd7a2b09 Fix the comment
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-27 10:39:51 +00:00
florian
1dfc3f9393 Add a watchdog driver for rdc321x (needs testing) and try to detect the rdc cpu
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8505 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-27 10:37:12 +00:00
florian
2fddc9a438 Make the architecture gpio more readable
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-27 10:36:29 +00:00
nico
0e03ee56fd revert [8473] (see [8055])
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-27 02:04:35 +00:00
juhosg
6b9dfc5e20 [adm5120] make overriding of CPU features configurable, and enable it by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8493 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-26 13:09:11 +00:00
mbm
26be763517 workaround for timer glitch on some boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8483 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-25 13:18:58 +00:00
mbm
c2e9789198 fix wan configuration on wr850g v2/v3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-25 12:27:01 +00:00
juhosg
bb9d6cad07 [adm5120] override CPU features
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-24 19:34:25 +00:00
florian
91da1a0fc8 Build the quota module for 2.4 targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-23 16:19:17 +00:00
florian
15064b00d6 Add the icplus phy patch, will be required for the r6040 driver later, thanks to Daniel Gimpelevich
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-23 15:48:46 +00:00
juhosg
092f3a374a [adm5120] disable VLANs for RB1xx boards (#2132)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-22 19:39:38 +00:00
florian
675fbe3d46 Add kmod-ppp-synctty (#2231)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-22 08:31:49 +00:00
nbd
6c1223e189 add sysupgrade script for config preserving system upgrades. only implemented for x86-2.6 at the moment, but can be ported to other platforms easily
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-21 18:23:57 +00:00
florian
0f4b236ce3 Add the ipset missing file from #1970
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-21 16:03:41 +00:00
florian
a12650b506 Move to 2.6.22.4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-21 10:06:01 +00:00
florian
da62128d18 Add usb-keyspan modules (#2229)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-21 09:42:25 +00:00
florian
5b5f704d9a Compile crc itu-t as a module
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8449 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-21 09:34:02 +00:00
nbd
7b7737acaf add refresh ioctl to mtd (for rescanning partitions after reflash)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-19 21:53:17 +00:00
nbd
5ef93ec8e1 disable CONFIG_EMBEDDED for x86-2.6, enable KALLSYMS
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-19 10:58:32 +00:00
juhosg
04f0dfd2d3 [adm5120] fix ethernet port mapping of the RB133
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-19 10:52:19 +00:00
nbd
83ad4a2d05 disable romfs, nothing uses it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8430 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-19 10:01:17 +00:00
nbd
06864710ac fix an off-by-one error
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8427 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-19 01:06:26 +00:00
nico
908c9bf7f6 cosmetic fix: properly indent source
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8425 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-18 17:02:26 +00:00
nico
e1049ec392 enable use of 8M flash (closes: #2232)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8424 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-18 16:53:26 +00:00
nico
828c43f29d fix vlynq initialization (closes: #2135)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8423 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-18 15:40:31 +00:00
nico
1a8d2661ac update ar7 config, disable watchdog for now (closes: #2146)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-18 15:33:21 +00:00
nico
1e8aa4308a remove useless code from board support (closes: #2164, thanks to Matteo Croce)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8421 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-18 14:50:00 +00:00
juhosg
97cf62053d [adm5120] cleanup patch of the USB driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-13 15:47:50 +00:00
florian
41b0c8fca5 Fix typo (#2210)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-12 11:12:38 +00:00
florian
2684b5ae8d Addd kernel modules for NTFS (#2181)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-11 13:09:27 +00:00
nbd
6c083dc04d fix ar7 image installation (patch by sw, fixes #2197)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-10 22:37:28 +00:00
juhosg
d7d76f7c48 [adm5120] USB driver fixes
* fix allocation of the ED/TD descriptors
 * remove some unused fields from admhcd struct


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-10 19:23:53 +00:00
florian
bab1396b79 Revert the command line appending, was causing some devices not to boot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-10 14:01:34 +00:00
rwhitby
688fc43bb8 ixp4xx-2.6/nslu2: Added support for building 16MB images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8388 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-10 13:09:12 +00:00
juhosg
8f4b522143 [adm5120] minor usb driver cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-10 08:56:41 +00:00
florian
e15d624e59 Fix the bcm96358 PRID
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-08 15:35:22 +00:00
florian
ab0edce43a Use the dmz led as diagnostic led
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-08 12:23:41 +00:00
florian
795c5b1b26 More rdc fixes, thanks to Daniel Gimpelevich
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-08 12:01:51 +00:00
juhosg
20deea5f7c [adm5120] LED driver fixes
* add LED definitions for the BR-6104K boards from #2153
 * sort board definitions alphabetically


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8377 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 16:19:41 +00:00
juhosg
c0a6927a77 add support for special LED brightness values
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8376 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 16:11:58 +00:00
florian
82fb21ae13 These patches moved to generic-2.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8375 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 09:44:12 +00:00
florian
72d3ca6175 Remove the eeprom patches, but move the git-newsetup to generic, so that the x86 target can benefit from them
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8374 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 09:43:05 +00:00
florian
1ce3997dc2 Also add eeprom 93cx6 to generic-2.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8372 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 09:38:41 +00:00
florian
e9b9b6d34b Update rdc-2.6 description and fix the firmware for sitecom devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8371 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 09:34:39 +00:00
florian
96455c222d Fix the gpio handling and flash resource declaration, thanks to Daniel Gimpelevich
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8366 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 09:12:09 +00:00
florian
8ae34a4329 Enable kexec for x86 as well (#2141)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8365 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 07:48:44 +00:00
florian
11bcac143c Revert 8353, can cause more bad than good
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 07:37:47 +00:00
nbd
12c49b6a6a build system cleanup/restructuring as described in http://lists.openwrt.org/pipermail/openwrt-devel/2007-August/001159.html
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 00:04:25 +00:00
florian
17453f9ace Prevent the ioctl from handling even unsupported ioctls
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8360 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-06 20:28:10 +00:00
florian
a0de7bd64f Allow rdc-2.6 to kexec
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8359 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-06 19:43:45 +00:00
florian
ae1dbe5655 More led driver fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8358 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-06 19:25:12 +00:00
florian
f3fd9a2cbb Remove the LED code from the network driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8357 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-06 18:56:40 +00:00
florian
6079728bcc Still broken for now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8356 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-06 18:50:34 +00:00
florian
d03a2de5d3 More rdc-2.6 fixes by Daniel Gimpelevich, thanks !
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8355 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-06 18:48:58 +00:00
florian
533b9e3bd4 Put back some code from the 2.4 driver, supposed to boot network perfs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-06 18:40:28 +00:00
florian
e2b5ab4233 Disable NAPI by default (#1671)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-06 18:13:23 +00:00
juhosg
f6e8fec1b4 [adm5120] add special values for GPIO lines in switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8351 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-06 17:25:49 +00:00
florian
47ef8de260 Add generic gpio support to rdc, convert the led driver to be a platform driver, need to convert the flash driver as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-06 14:15:57 +00:00
blogic
94040edc45 added improved watchdog driver for amazon
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8346 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-05 16:26:47 +00:00
blogic
a4f37bc4de cleaned up amazon serial and prom code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-05 08:53:07 +00:00
blogic
1891583c5a removed volatile register derefs from amazon setup code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-04 01:55:44 +00:00
blogic
b0c3c46ac8 rewrite of the amazon irq code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8333 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-04 01:37:23 +00:00
juhosg
d8fb4a81ad [adm5120] fix reset function in USB driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-03 17:31:52 +00:00
juhosg
26d1c866b1 [adm5120] USB driver fixes
* fix compiler warning in adm5120-hcd.c
 * allocate mem_resource with the correct size
 * fix driver name in the platform device structure

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-03 15:59:23 +00:00
florian
0efa7ca668 Make jffs2 images work with rdc, add a sitecom wl-153 profile and kernel config, fix rt61 installation (thanks to Daniel Gimpelevich)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-03 07:28:43 +00:00
florian
43aa5af0f0 Some adm5120-hcd cleanups
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-02 21:06:00 +00:00
florian
501eeb8888 Add a zyxel prestige profile for the adm5120eb target, build the hcd driver as a module
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-02 13:53:23 +00:00
juhosg
77f71c02e2 [adm5120] add definitions for RouterBOARD 150, no NAND driver yet
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-02 06:33:52 +00:00
juhosg
a5e3f9b197 [adm5120] add support for board specific vlan matrix, should fix #2132
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-01 16:54:51 +00:00
florian
7ee6686c52 Add CONFIG_HID to not set by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-01 14:56:33 +00:00
florian
732595075b Fix the AR7 led driver compilation (#2160)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-01 08:38:28 +00:00
florian
247c33e26d Register the second uart on tnetd7300 and fix the watchdog register for 7200/7300, thanks to DerAgo (#2149)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-31 15:52:06 +00:00
florian
174f70763e Fix the gpio init (#2148)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-31 15:46:56 +00:00
florian
9bf1f683d4 Remove the dependency to devio, since it is not in trunk
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-31 15:07:44 +00:00
florian
e9b42c45b0 Fix the remaining kernel config options (#2102)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-31 14:59:11 +00:00
nbd
196ad55bd2 next round of cleanup, convert target/ - make -j works now ;)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-30 21:14:08 +00:00
florian
d309950948 Better x86 generic config, the lzma decompressor is now reliable (thanks to Daniel Gimpelevich)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-30 15:58:15 +00:00
blogic
1827e880c7 improved au1000 usb patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-29 17:42:20 +00:00
blogic
f1e8cfde7a improved patch for au1000 usb-power switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-29 17:08:06 +00:00
blogic
52def47d88 removed fox-vhdl patch, it will return with .22
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-29 14:22:46 +00:00
blogic
be3fe918ae small fix to etrax serial port setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-29 10:21:07 +00:00
hcg
e50a65785a Modified patches for 2.6.22.1 kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-29 06:01:46 +00:00
hcg
387e6f0185 Prepare for 2.6.22.1 kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-29 04:26:11 +00:00
blogic
4694b25d8f some fixes to the etrax build
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-29 00:04:37 +00:00
juhosg
2d7149395b [adm5120] use adm5120 flash map driver on BE targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8205 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-28 08:51:46 +00:00
florian
3ba84cb708 Add the 93cx6 patch to generic-2.6, correctly fix dependencies on the rt2x00 drivers (thanks to Daniel Gimpelevich)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8200 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-27 18:13:35 +00:00
juhosg
ec28552f31 [adm5120] add LED definitions for the RB133/133C boards, thanks to Christophe Lucas
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8199 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-27 16:57:19 +00:00
juhosg
b0b5a78669 [adm5120] rename patches to follow our naming conventions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8196 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-27 15:58:58 +00:00
rwhitby
1eb01bcbcb Removed the obsolete MTD_SPLIT_ROOTFS config symbol.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-27 12:59:39 +00:00
rwhitby
0967e5f365 Add missing config symbols that stop a default 2.6.21.6 built - set them all to default values so nothing changes for anyone
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-27 08:09:04 +00:00
nico
1df67d3c22 more cosmetic fixes for ar7
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-27 03:48:54 +00:00
nico
38d9c42391 update ar7 to 2.6.22.1 (thanks to Matteo Croce for his great help)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-27 03:07:52 +00:00
nico
8bf289d5fd cosmetic fix (indent and use c-style comments)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-27 00:59:50 +00:00
nico
ee4ec8bc54 update rdc-2.6 config (thanks to Daniel Gimpelevich)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-27 00:49:54 +00:00
nbd
4921c52586 protect the adm5120 pci ops with a spinlock - fixes race conditions that happened in combination with madwifi and more than one card
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-26 21:38:35 +00:00
florian
14a08a0fb2 Use the new x86 code, thanks sn9 !
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-26 21:18:21 +00:00
nbd
3bdcdb8e80 brcm47xx-2.6: add a few nops here, some irq saving there, blast the full cache on page icache flushes
i really hate the broadcom cpu bugs, but it's much more stable now.
PS: A /* Ouch */ in the original source showed me the way ;)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-26 04:35:23 +00:00
nbd
c3e54ffcc1 fix the size of the flash mem window on pronghorn metro (#2070)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-25 17:37:16 +00:00
florian
8ce9e8a9b1 NAPI for r6040 of course depends on r6040
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-25 15:09:35 +00:00
florian
5448a92c71 Remove preinit.arch, not used, compile NAPI support for R6040, change the profile name to ar525w
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8160 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-25 15:05:16 +00:00
juhosg
87f5e12cd0 [adm5120] uses AMBA PL010 driver for the serial ports from now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8159 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-25 14:47:16 +00:00
florian
eeab7aa026 Upgrade rdc to 2.6.22.1, include r6040 ethernet fixes by sn9, thanks !
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-25 09:16:20 +00:00
blogic
87378c0dd0 on the au1000 usb could never work as the power switch was never enabled :P
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8151 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-24 22:40:24 +00:00
blogic
cf267e864c fixed au1000 eth0 ioctl patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-24 21:11:28 +00:00
blogic
a0e087f6dc oops, wrong file for au1000 pci fix
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-24 20:35:35 +00:00
blogic
69c3d2d458 fixed up the au1000 pci support, was caused by the au1000 having a 36bit io bus and the max add being set to 32bit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-24 20:33:35 +00:00
juhosg
57487af59e [adm5120] reorder rootfstypes to allow both squashfs and jffs2 images to boot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-24 20:28:25 +00:00
juhosg
3be729d854 [adm5120] fix kernel command line
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-24 16:20:27 +00:00
florian
cf070486dd Add more ar7 fixes by DerAgo. Fix vlnyq initialistion on fritzbox, add prom_printf required for kgdb, make kgbd finally work, thanks !
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8141 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-24 11:05:23 +00:00
florian
b0b1a6af4f Fix the handling of unsupported ioctls (eth0 appeared in iwconfig for instance)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-24 09:15:20 +00:00
blogic
e2133d3ce6 initial merge of infineon code for amazon, pci is still broken a bit. a big thank you goes to infineon for providing info and reference code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-23 22:10:11 +00:00
juhosg
32543f46ca [adm5120] cosmetic changes in flash driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8135 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-23 19:51:49 +00:00
florian
282fd66c5d Add back the port priority for r6040
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8134 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-23 18:35:34 +00:00
nbd
d1ca5112f8 disable reserved blocks for checkpointing in yaffs2 on rb532 and adm5120
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-23 14:17:00 +00:00
juhosg
e618dd2230 [adm5120] adm5120_mtd.c is no longer in use
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-23 13:46:05 +00:00
juhosg
442a48289d [adm5120] board specific fixes
* fix detection of RB-133C, thanks to Christophe Lucas
 * fix detection of RB-153
 * add support for WP54G-WRT to the lzma-loader
 * fix adm5120_mtd.c for WP54G-WRT in 7.07
 * now it's ready for the release of 7.07


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-23 13:33:56 +00:00
florian
801db5e277 Allow squashfs images for au1000, use the automatic rootfs split
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-23 12:12:14 +00:00
juhosg
5de63c9d91 [adm5120] cleanup patches
* nuke patches for 2.6.21
 * refresh patches for 2.6.22


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-23 09:27:32 +00:00
rwhitby
3fde093253 Enabled IXP4xx beeper
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-23 07:18:17 +00:00
nbd
fd7d7215c6 simplify and fix adm5120 image building, fix broken FEATURES handling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-23 02:13:10 +00:00
nbd
8b77360d97 add missing dependencies and kernel config options
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-23 01:22:40 +00:00
juhosg
bedf02f2fd [adm5120] fix printk format arguments in memory detection code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-22 16:08:27 +00:00
rwhitby
abece8d89a ixp4xx/config: Enabled PPP for bluetooth dund usage (for Treo650 bluetooth access point)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-21 13:57:56 +00:00
rwhitby
e671525ba2 ixp4xx/nslu2: Added kmod-usb-ochi to the profile for USB 1.1 devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8092 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-21 13:31:45 +00:00
juhosg
3b1fa8d2b9 [adm5120] flash driver fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-21 11:05:46 +00:00
nbd
c689c8ef34 fix yealink kmod compile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-21 01:00:42 +00:00
nbd
8099d2ffb8 fix kmod-pwc compile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-21 00:50:31 +00:00
juhosg
936d19e10c [adm5120] fix switch driver, force all packets from all the ports are low priority
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-20 20:46:39 +00:00
juhosg
071b759c61 rootfs_split: fix a typo, and fix compiler warnings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8082 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-20 18:32:48 +00:00
nbd
7865baba1c fix rootfs split partition renaming (fix by Eric L. Chen)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-20 18:09:00 +00:00
florian
921f798f6a Fixup the hcd driver, add a start/stop/reset/sw_reset functions, should allow it to basically run
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-20 16:26:39 +00:00
florian
8e58a9600b Fix wget2nand with the host's patch-cmdline and the new kernel filename
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-20 15:45:20 +00:00
florian
9105f5566e compress the kernel that resides on the nand memory
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-20 14:33:15 +00:00
juhosg
48b7bf6e3d [adm5120] fix switch_driver to avoid segfaults
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-20 09:07:18 +00:00
juhosg
547672a7cb [adm5120] update trxsplit
* use generic rootfs_split feature
 * resync kernel config


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-20 08:47:02 +00:00
florian
3295cd2c88 Fix indentation for add_mtd_partitions (#2072)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 19:03:10 +00:00
florian
550e5838c4 Remove tgz hacks
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 18:50:16 +00:00
nbd
907958f268 really fix tgz images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 18:20:56 +00:00
juhosg
35016b5822 restore Kconfig options of rootfs_split for 2.6.21.5
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 17:15:32 +00:00
florian
5ea7603e04 Suppress promc.c.orig, fix the nand detection with newer boards (#2038)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 16:19:19 +00:00
florian
9f7de89d9b revert 8059, via-rhine is built in the kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 16:00:20 +00:00
juhosg
fc66ff967a rootfs_split fixes
* avoid compiler warnings on 2.6.22.1
 * applies cleanly on 2.6.21.5


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 15:52:37 +00:00
florian
72d5517429 Include kmod-via-rhine by default for rb532
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 15:23:34 +00:00
florian
5a0ce297c0 Convert the NAND driver to platform_driver, allow tgz image to be built correctly
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8058 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 14:53:24 +00:00
florian
52b2255fef Add wget2nand, this should allow netboot installation directly to nand
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8057 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 14:52:38 +00:00
florian
39b5ef6e05 Really add the LED driver :)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8056 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 14:51:56 +00:00
nbd
021e9ef609 disable ipt_quota on linux 2.4 - iptables user space no longer compiles with it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 14:29:05 +00:00
florian
fd96b4e157 Put the init flag in the structure
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 12:54:17 +00:00
florian
40cf82d537 rb532 has pci support and should build tgz images by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8052 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 12:27:40 +00:00
florian
8677fb58f7 Allow the redboot supplied command line to be append (#2089)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 10:24:16 +00:00
juhosg
6c27cb4e19 clean of the rootfs_split patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8047 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-19 07:13:20 +00:00
florian
388d9e834c Replace hardcoded values with their correct definitions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8046 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 17:27:40 +00:00
florian
5b386e7073 Convert the nand driver to a platform_device, should only allow routerboards to use it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 17:16:36 +00:00
florian
f985faf3de Fix the tgz image build
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 14:40:57 +00:00
florian
9fe53f2340 The RB1xx profile should only provide tgz image and pci support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 14:22:46 +00:00
florian
9ab2e7b7fc Add a USES_TGZ config.in variable, so that RB1xx profiles can use it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 14:11:44 +00:00
florian
41e51dec3b Add an ar7 tnetd7200 fix by DerAgo, thanks !
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 13:42:24 +00:00
nbd
bf3a6190ff add missing config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8035 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 13:42:04 +00:00
florian
c1791fbd32 Resync x86_64 kernel config and make uml build ext2 images by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8034 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 13:01:32 +00:00
florian
410fd2dad2 Upgrade uml to 2.6.22.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8033 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 12:43:34 +00:00
florian
ae505386e5 Load the appropriate MTD driver if we were booted from NOR/NAND only, use the TRX mapping by default if bootloader unknown
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8032 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 12:13:37 +00:00
nbd
119f9165de disable a few things that are not packaged yet
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 12:02:17 +00:00
nbd
bf9b79b200 dynamically enable/disable kernel config options for kmod packages based on build system config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 11:31:01 +00:00
juhosg
94ccfb64e7 [adm5120] restore support for Infineon's EASY 5120 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-17 15:43:58 +00:00
florian
a61bb64c8b Preliminary support to bcm6358
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8020 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-17 12:12:39 +00:00
kaloz
0216763de7 bump brcm63xx to 2.6.22.1, too
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-17 10:54:08 +00:00
florian
90b6359cbe Add diagnostic stuff to rb500
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-17 10:28:31 +00:00
florian
774ac72291 Upgrade rb500 to .22.1, add the LED driver from #986
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-17 10:25:18 +00:00
florian
358803f75a Add ipt_random module
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-17 08:47:44 +00:00
florian
72f8c837fe Adm5120 NAPI polling support and fixes by Thomas Langer and Friedrich Beckmann
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-17 08:33:41 +00:00
florian
ef4dee9385 Fix warnings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-17 08:32:29 +00:00
nbd
f7562fb4b1 better support for handling various jffs2 eraseblock sizes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-16 22:06:45 +00:00
florian
404bc7d80d Remove the bogus pciutils dependency
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-16 18:18:20 +00:00
nbd
ab79dbb807 fix ipp2p
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-16 16:07:32 +00:00
nbd
3b1d53fc44 add kernel_oldconfig target
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-16 10:03:03 +00:00
rwhitby
3efff39b2d ixp4xx/fsg3: Enabled the Winbond W83782D sensor for Freecom FSG-3 temperature sensing and fan control
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-16 05:37:50 +00:00
nbd
c2fdf9e0b5 disable __must_check by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-16 05:20:28 +00:00
rwhitby
2b7010b47c Set ixp4xx network config to static 192.168.1.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-16 04:35:09 +00:00
rwhitby
5e7b506fc6 ixp4xx/NSLU2: Added devio to the NSLU2 profile (required for reflashing the kernel)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-16 04:00:21 +00:00
rwhitby
eeb8ee7c48 ixp4xx-2.6: Removed the network config override file, cause we agreed that ixp4xx images should behave like all other openwrt images. So ixp4xx images are static 192.168.1.1 on lan now instead of dhcp.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7991 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-16 03:30:02 +00:00
rwhitby
e5b08070f5 ixp4xx-2.6: Remove the inadequate netconfig script (which doesn't work on the only machines that it was meant to support), to allow ixp4xx images to behave like all other OpenWrt images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-16 03:26:40 +00:00
rwhitby
9fb19c49b5 ixp4xx-2.6/config: Removed the disabling of swap so that the generic enabling of swap can come through
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-16 03:22:50 +00:00
juhosg
dcd9e5ec4d [adm5120] fix of the board specific initialization of the GPIO pins
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-15 19:01:19 +00:00
juhosg
526a41b8bd [adm5120] refresh patches for 2.6.22.1 using quilt
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-15 15:33:15 +00:00
juhosg
b9a483cabe [adm5120] lzma-loader improvements
* update LzmaDecode.[ch] to 4.16
 * speed up decompressing from flash
 * uses printf from lzma-loader of generic-2.6 target
 * initial support for flash bank switching


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-15 15:02:38 +00:00
rwhitby
eb0c9f85a8 ixp4xx-2.6/config: Removed the PPP config override to allow PPP modules to be built
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-13 22:23:09 +00:00