qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-18 04:17:09 +02:00
Code
24,771 Commits 13 Branches 0 Tags 117 MiB
85e0a9fae1
Commit Graph

10078 Commits

Author SHA1 Message Date
nbd
1b103111a5 cns3xxx: fix gpio access and add gpio IRQ support 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

 target/linux/cns3xxx/patches-3.3/470-gpio_irq.patch |  536 ++++++++++++++++++++
 1 file changed, 536 insertions(+)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33648 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-07 23:23:52 +00:00
nbd
dcb25b7b8a ixp4xx: update Gateworks Avila board support 
Several new features for newer boards:
 - add additional UARTs present on some boards
 - add additional LEDs present on some boards
 - add HSS audio device codec present on some boards
 - add support for GSC present on some boards
 - add per model setup support for newer boards
 - set FLASH window per-model for boards with larger FLASH

Some fixes:
 - add IRQ mapping for additional PCI devices (USB Host)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33647 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-07 23:23:47 +00:00
nbd
a750833ad3 ixp4xx: patch cleanup 
roll all avila patches into a single patch (no code changes)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33646 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-07 23:23:43 +00:00
nbd
1a32f40f07 ixp4xx: Add HSS audio driver for Avila product family 
Add ixp4xx HSS audio driver for Avila

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33645 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-07 23:23:39 +00:00
nbd
6957e756d9 ixp4xx: update Gateworks Cambria board support 
Several new features for newer boards:
 - add irq mapping for additional devices
 - add platform data for i2c bus to SFP modules
 - add additional UARTs present on some boards
 - increased R/W delay for expansion bus UARTs
 - add additional LEDs present on some boards
 - add GPIO exports and configuration
 - add ENET switch config present on some boards
 - add support for GSC present on some boards
 - added per model setup support for newer boards

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33644 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-07 23:23:34 +00:00
nbd
8969cb6c15 ixp4xx: patch cleanup 
roll all cambria patches into a single patch (no code changes)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33643 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-07 23:23:29 +00:00
nbd
520e13d5a6 ixp4xx: split out new UART I/O to its own patch 
This is being done for general cleanup

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33642 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-07 23:23:25 +00:00
nbd
821655e4a8 x86: rename the iso file to openwrt-x86-generic.iso 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33641 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-07 23:05:39 +00:00
nbd
48e426d185 x86: remove grub-legacy 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33640 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-07 23:01:56 +00:00
nbd
1be0626273 x86: add grub2 iso support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33639 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-07 23:01:52 +00:00
nbd
3d4fd91c66 x86/generic: enable cdrom + iso9660 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33638 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-07 23:01:47 +00:00
juhosg
3819c1dced ar71xx: build image for the TL-WR841N/ND v8 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33623 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-04 20:16:06 +00:00
juhosg
2a77bb1d80 ar71xx: user-space support for TL-WR841N/ND v8 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33622 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-04 20:16:05 +00:00
juhosg
685e1a417d ar71xx: add support for the TL-WR841N/ND v8 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33621 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-04 20:16:03 +00:00
hauke
c155089844 [brcm47xx]: bcma: do not initialize deactivated PCIe cores 
Before it was tried to initialize the deactivated PCIe core in client
mode, but this causes the SoC to hang. Just do not initialize it at all
and ignore the core it is not working and nothing is connected to it
when the specific bit is set in the boardflags.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33620 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-04 15:45:54 +00:00
hauke
351a9e7953 [brcm47xx]: use memcmp in mem size detection as suggested by blogic 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33619 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-04 15:42:12 +00:00
florian
e10dff6c2e [rdc] fix typo in 05_set_ether_mac_rdc preinit script (#11166) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33618 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-04 12:36:50 +00:00
juhosg
5d370d02a9 ramips: add image for ALL0256N-8M 
The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB.
In order to expose the whole amount of flash, add another image which contains
the corresponding GENERIC_8M mtdparts.

[juhosg: change suffix from '8m' to '8M']

Patch by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33614 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-04 06:34:09 +00:00
florian
b6d73b966b [pxa] add Default and Gumstix PXA profiles 
Gumstix builds a fake flash image for usage in qemu

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33609 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-03 16:15:05 +00:00
florian
09c7ab130e [pxa] advertise jffs2 feature 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33607 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-03 16:12:57 +00:00
florian
28d64148e8 [pxa] remove broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33606 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-03 16:12:39 +00:00
florian
ffee55d944 [pxa] fix build with latest gpiolib changes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33605 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-03 16:12:03 +00:00
florian
8eed7abf41 [mcs814x] more convertions to {read,write}_relaxed I/O accessors 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33604 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-03 16:10:47 +00:00
nbd
db72b8cfc1 cns3xxx: add missing kernel config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33603 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-30 15:31:34 +00:00
hauke
46d98a975d [kernel] refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33602 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-30 11:45:53 +00:00
hauke
bd7b515b16 [brcm47xx]: bcma: use fallback sprom if sprom on card was not valid 
Sometimes the PCIe card indicates that it has a sprom somewhere and we
are able to read the memory region, but it is empty and not valid. In
these cases we should try to use the fallback sprom as a last chance.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33601 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-30 11:45:31 +00:00
hauke
6f8cf8b4c0 [brcm47xx]: bcma: initialize sprom earlier 
The chip common and the PCIe code are accessing the sprom struct which
is not filled when these cores are initialized. Fix this by adding an
early initialize and fill the sprom struct before accessing it in other
code.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33600 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-30 11:44:44 +00:00
hauke
ea60258a5f [brcm47xx]: run make kernel_oldconfig 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33599 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-30 11:44:04 +00:00
hauke
ea8a5ad7cc [brcm47xx]: ignore the last page on bcma based SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33598 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-30 11:43:40 +00:00
hauke
43594d67bf [brcm47xx]: Fix reading sprom from nvram without a prefix 
The bcma based SoCs with a ieee80211 core on the SoC and an other
connected via PCIe or USB store the sprom for the SoC with a sb/1/
prefix. The SoC with just one wifi core do not use prefixes. The
BCM4706 do not use a prefix for the SoC part at all, because the prefix
is the path to the ieee80211 core and there is non on the BCM4706.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33597 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-30 11:43:13 +00:00
hauke
bdb7b30f11 [brcm47xx]: improve the check for the memory size 
This will hopefully fix bug #9360 and #9097 in trunk.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33596 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-30 11:42:16 +00:00
blogic
552688c8bf [kernel] dont explicitly select wireless-tools. rely on the drivers that need them to have the right dependency 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-28 21:54:31 +00:00
blogic
4991a16db1 [atheros] add support for adm6996 phy 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33592 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-28 21:38:02 +00:00
blogic
786e0389eb [lantiq] tapi was not registeredproperly for most arcadyan boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33591 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-28 20:57:06 +00:00
kaloz
295c473ae4 Add FIQ support for cns3xxx 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33581 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-28 17:35:35 +00:00
kaloz
57ce687d38 Update board support for Gateworks Laguna Product family 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33580 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-28 17:34:18 +00:00
kaloz
07511ec793 USB iso mode fixes 
Resolves an issue where isochronouse USB would cause the driver to hang as
well as scheduling issues.
 
 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33579 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-28 17:31:22 +00:00
juhosg
6d33dda889 ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33575 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 20:05:42 +00:00
juhosg
da91b54f0f generic: enable CONFIG_USB_EHCI_TT_NEWSCHED 
This feature was experimental in old kernels but
that flag has been removed in 2.6.36. Additionally,
the option is enabled by default since then.

See: http://www.spinics.net/lists/linux-usb/msg31993.html

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33574 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 20:05:39 +00:00
juhosg
c4723d07e6 ramips: add memory detection code for RT5350 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33571 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 10:18:15 +00:00
juhosg
4110f0d379 ramips: allow to use custom code for memory size detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33570 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 10:18:14 +00:00
florian
ea2de79f86 [uml] include sys/resource.h in arch/um/os-Linux/start_up.c (#12155) 
Required for recent (e)glibc systems

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33569 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 09:21:01 +00:00
kaloz
f1b159c402 [cns3xxx]: fix ncores for single-core systems. 
For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS
shows which ones are active.
 
 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33566 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 08:07:17 +00:00
kaloz
1bf2f96f67 [cns3xxx]: add i2c retries 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33565 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 08:06:13 +00:00
kaloz
b966239c03 [cns3xxx]: fix pcie abort handling 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33564 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 08:05:19 +00:00
florian
c5fa20650a [brcm63xx] remove kmod-spi-bitbang 
This is no longer a dependency of kmod-spi-bcm63xx

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-26 20:11:37 +00:00
juhosg
07d80167c0 generic: add upstream commit id to codel patches and refresh those 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33560 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-26 14:17:17 +00:00
florian
ee1a7a743e [kernel] backport the upstream entropy changes (#11951) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33559 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-26 12:54:01 +00:00
florian
62bcd38cc3 [targets] get rid of the IRQF_SAMPLE_RANDOM flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33558 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-26 12:53:58 +00:00
florian
237dcc5119 [mcs814x] add wmbus-repeater to the dLAN USB Extender profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 20:56:50 +00:00
florian
e47c1f32bb [mcs814x] enable multicast and advanced ip routers configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 20:53:34 +00:00
florian
9b1b55700d [mcs814x] add kmod-usb-serial-ftdi to the dLAN USB Extender profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 20:50:20 +00:00
blogic
01886f51dd [ramips] make uci-defaults switch detection work on rt5350 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 14:47:18 +00:00
blogic
e9a777ed10 [ramips] add ethernet support for rt5350 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 14:47:08 +00:00
blogic
90960d25b1 [ramips] make ramips ethernet use a register mapping table 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 14:46:58 +00:00
hauke
98837afb76 [brcm47xx]: activate failsafe on all ports of the switch and not just port 0. 
Sometimes the port 0 was the WAN port or there could be some device 
where the port 0 is not wired to an actual Ethernet port. Now telnet in 
failsafe will listen on all ports of the switch so user do not have to 
search for the correct port any more. This change will make the switch 
leak traffic between the WAN and the LAN port, but you should not use 
failsafe while connected to a untrusted network.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 14:04:59 +00:00
juhosg
a23e652340 ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards 
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed  from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:57:41 +00:00
juhosg
417602ac1e ar71xx: automatically find WLAN calibration data on TEW-673GRU 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:57:40 +00:00
juhosg
bb4a32bb81 ar71xx: automatically find WLAN calibration data on DIR-825-B1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:57:38 +00:00
juhosg
39348acc10 ar71xx: add missing backslash to uci-defaults/leds (closes #12240) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33537 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:49:43 +00:00
blogic
ba6ee81454 [ramips] unbreak port mapping detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33536 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 09:51:48 +00:00
juhosg
a7bf55a712 ar71xx: use different machtype and setup for the TL-MR3040 
Should fix #12211. Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-24 18:45:56 +00:00
nbd
476060c78a x86: avoid using grub prepare when using grub2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-23 09:59:56 +00:00
nbd
9fab9ffb98 x86-generic: enable a few more common kernel options/drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33516 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 23:29:20 +00:00
nbd
02074f1f37 kernel: increase log buffer size 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33515 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 23:10:42 +00:00
nbd
5e6024e9f9 x86: enable usb storage support for the generic subtarget to support booting from usb devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 21:15:59 +00:00
nbd
e2b0f224fb x86: add support for building grub2 images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 20:10:42 +00:00
nbd
e3c123c82b x86: split generic image building into a separate script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33511 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 20:10:35 +00:00
nbd
ea979190c1 x86: rename gen_image_x86.sh to gen_image_grub.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33510 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 20:10:31 +00:00
nbd
cc4fec07c7 cns3xxx: fix ethernet driver tx completion and queue stop/start 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33504 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 00:34:53 +00:00
nbd
ddbfaa46f7 cns3xxx: implement ethernet fraglist tx support for improved bridging performance with jumbo frames 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33503 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 00:34:49 +00:00
kaloz
e3342242df [cns3xxx]: move gpio stuff into the right file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33502 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-21 05:40:04 +00:00
kaloz
053d207b3c [generic/3.3]: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33501 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-21 05:38:16 +00:00
nbd
42b2ad0d3b cns3xxx: add a small optimization for rx offload 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33500 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-21 00:13:12 +00:00
nbd
9097df315e cns3xxx: fix ethernet port lookup for multi-descriptor jumbo frames 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33499 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-21 00:13:08 +00:00
nbd
1a638ea9ad cns3xxx: fix ethernet packet alignment issues (hw has an alignment requirement of 64), fix skb fragment chaining 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33498 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-20 20:27:18 +00:00
nbd
6c383cf512 kernel: enable perf events when enabling profiling, fixes oprofile on arm 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33497 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-20 20:27:14 +00:00
hauke
beb93dd4a3 [brcm47xx]: deactivate mips wait instruction for MIPS 74K on Broadcom SoCs 
When not removing support for the wait instruction, when ruining on the 
BCM4706 SoC the system stops after msleep() without an exception. I 
haven't seen this problem on the other Broadcom SoCs with a 74K CPU, 
but in the Broadcom SDK it is deactivated for all CPUs of this type.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33496 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-20 14:51:57 +00:00
nbd
7abd95f8ec cns3xxx: remove the broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33493 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:25 +00:00
nbd
2f58535c56 cns3xxx: fix kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33492 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:22 +00:00
nbd
bae52cf056 cns3xxx: fix ethernet jumbo-frame support, use single-page rx buffers and skb fragment lists 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33491 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:18 +00:00
nbd
c206ff5a5d cns3xxx: fix ethernet tx checksum offload 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33490 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:15 +00:00
nbd
7cb76ea6ab cns3xxx: merge ethernet driver changes from gateworks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33489 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:12 +00:00
nbd
2a134ef25a cns3xxx: build images for the old boot loader and the new one (default to the new one) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33488 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:09 +00:00
nbd
d6c5497a48 cns3xxx: fix the ethernet driver makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33487 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:06 +00:00
nbd
d898c2926f cns3xxx: reorganize patches, fix pcie io space init order 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:02 +00:00
nbd
21cd9bc80a cns3xxx: move virtual io addresses to vmalloc space to fix kernel BUG() calls 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33485 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:49:58 +00:00
nbd
77da9ae1d3 cns3xxx: add missing callbacks for the laguna machine support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33484 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:49:50 +00:00
florian
b385661768 brcm47xx/profiles/PS-1208MFG: remove reference to non-existing package 
The package block-hotplug doesn't exist, refer to block-mount instead.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33474 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 15:13:33 +00:00
florian
5714253063 omap24xx/profiles/n810: remove reference to non-existing package 
The package block-hotplug doesn't exist, removing reference to it.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33473 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 15:13:30 +00:00
hauke
49bdd0278a [brcm47xx]: update fix-boot patch. 
Do not change the code any more but use the kconfig options


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33463 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 10:18:36 +00:00
hauke
11e47465cc [brcm47xx]: update gpio patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33462 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 10:17:51 +00:00
juhosg
484998f83f ar71xx: fix a typo in TEW-637GRU image names 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33460 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-18 14:32:25 +00:00
juhosg
0cfc5d05b3 ar71xx: revert DIR-825-B1 wholeflash image support. 
It should be implemmented in a cleaner way.

This reverts the following commits:
[ar71xx] dir-825-b1: Fix wholeflash images
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash"

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33459 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-18 14:30:57 +00:00
florian
b079ac667f [realview] disable VFPv4 probing 
This will make the kernel crash on systems using qemu < 1.1.0. Until fixed
disable VPFv4 capability probing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-18 10:00:56 +00:00
florian
d68d56b155 [realview] partially revert r33403 
The target CFLAGS were also accidentally changed

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33457 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-18 10:00:46 +00:00
juhosg
a384f7bf1b ar71xx: register the NAND flash controller device on DB120 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33455 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:57 +00:00
juhosg
88d42e3e5a ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:55 +00:00
juhosg
52f5b88b84 ar71xx: ar934x_nfc: increase DMA retry count 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33453 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:54 +00:00
juhosg
5c9038f12e ar71xx: ar934x_nfc: optimize READOOB operation on large page devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33452 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:53 +00:00
juhosg
56caae5b72 ar71xx: ar934x_nfc: fix RNDOUT operation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33451 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:51 +00:00
juhosg
5cf642fa6f ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:50 +00:00
cshore
4e7d8aa302 [ar71xx] dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images). 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 14:17:12 +00:00
nbd
6cd281447f ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 11:17:29 +00:00
nbd
9d164b87ca ar71xx: fix WP543 image builds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33413 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-15 10:21:21 +00:00
blogic
8d4ebc34f0 D-Link DAP-1350; Avoid bricking esw config 
This is a patch to connect eth0.1 (lan) to the only
ethernet connector available.

D-Link DAP-1350 goes bricked with AA 12.09-beta.

This is because the current esw configuration for the
board connects eth0.2 (wan) to the *ONE and ONLY*
ethernet connector available, preventing initial access
to the board through 192.168.1.1 on eth0.1 after flashing,
effectively bricking the board.

There are things that should be done to make this board
really useful, but for AA 12.09, this one liner is
indispensable.

Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33411 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-15 09:28:28 +00:00
blogic
d41175cdb1 ramips/rt3883: fix a typo in the ASUS profile 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33410 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-15 09:20:50 +00:00
florian
f85f3848d7 [realview] partially revert r33403 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33409 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-14 15:44:25 +00:00
florian
933cabf6c9 [leon] set DEVICE_TYPE to developerboard 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33408 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-14 15:37:51 +00:00
florian
d15b926afd [leon] fix sparc32 assembler failures with newer toolchains 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33407 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-14 15:37:40 +00:00
florian
d88f9818d8 [leon] refresh patches so they apply cleanly 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33406 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-14 15:37:12 +00:00
florian
e2f7aae0b9 [realview] set DEVICE_TYPE to developperboard 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33403 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-14 15:36:33 +00:00
florian
79df2ee02b [malta] set DEVICE_TYPE to developperboard 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33402 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-14 15:36:30 +00:00
juhosg
f74bd75daa ar71xx: merge machine support patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33389 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:28 +00:00
juhosg
e9a522de9e ar71xx: register the NAND controller device on the RB2011 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33388 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:26 +00:00
juhosg
39bdbbc7fc ar71xx: add device registration code for the AR934x NAND flash controller 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33387 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:25 +00:00
juhosg
8788b410ee ar71xx: package the AR934x NAND driver module 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33386 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:23 +00:00
juhosg
ce47c98d07 ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33385 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:22 +00:00
juhosg
9edd5a0ba0 generic: add MTD_NAND_AR934X symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33384 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:21 +00:00
juhosg
93a698140f generic: move GENERIC_PWM symbol into the generic config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33383 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 06:38:31 +00:00
juhosg
e96ea88268 ar71xx: define NAND controller base address and register size for AR934X/QCA955x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33382 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-12 19:06:38 +00:00
juhosg
de071d14f7 ramips/rt305x: add initial support for Rt5350 SoC 
Somehow detecting the RAM size in common/setup.c doesn't
work here, it always detects 64M and then crashes on devices
with less RAM.
Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how
it could be, for now I use the mem=32M kernel parameter to get
stuff working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33381 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-12 19:03:12 +00:00
hauke
c96bed78c2 [brcm47xx]: add gpio sysfs entries 
This fixes #10256


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33369 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-11 15:04:20 +00:00
juhosg
29f447b9fd ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33362 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-10 14:38:01 +00:00
juhosg
e1ee097247 ar71xx: fix QCA955X_EHCI_SIZE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33360 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-10 14:32:54 +00:00
florian
405e94ce42 [generic] fix ixp4xx_hss build failure (#12162) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33356 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-10 08:53:21 +00:00
jow
20856122c5 [ar71xx] fix description of nand/Ath5k profile (#12149) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33352 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 21:40:26 +00:00
juhosg
4b7be33ba5 ar71xx: add initial support for RB2011UAS-2HnD 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33349 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:32 +00:00
juhosg
25dbd4639c ar71xx: use routerboot_find_tag to find wlan data offset on RB751 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33348 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:30 +00:00
juhosg
d0d14675bb ar71xx: add RouterBoot related helper routines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33347 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:28 +00:00
juhosg
2622bc18da generic add WLAN calibration data ID to routerboot.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33346 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:26 +00:00
juhosg
4834938a89 ar71xx: define MTD partitions for RB2011 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33345 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:24 +00:00
juhosg
775e69dfac ar71xx: add preliminary support for Mikrotik RB2011L 
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.

[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33344 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:22 +00:00
juhosg
527f8049cd ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33343 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:20 +00:00
juhosg
c4b6e540e4 ar71xx: add dynamic MDIO clock calculation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33342 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:17 +00:00
juhosg
38ca354ccc adm5120: move common routerboot definitions into a separate header file 
Those will be used on the ar71xx platform as well.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33341 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 11:55:42 +00:00
jogo
5e5c7d5aa1 bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi 
Fixes booting the device with button hotplug enabled (#10785).

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33340 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 11:54:56 +00:00
juhosg
3868d762d1 ar71xx: use the RLE library for RB751 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33338 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-08 17:51:56 +00:00
juhosg
6142d590e3 ar71xx: add library code for RLE decoding 
It will be used for the MikroTik boards.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-08 17:51:54 +00:00
juhosg
41be3a0bd3 ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33335 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-08 13:39:09 +00:00
juhosg
6f0a45267a ar71xx: refresh kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33334 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-08 13:39:04 +00:00
florian
08b17128a1 [mcs814x] use the recommended ARM I/O accessors 
use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33330 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-08 09:51:05 +00:00
cshore
60244743f9 [ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33326 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-06 18:15:26 +00:00
luka
507c46269b lantiq: fix sx76x default uci network configuration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33324 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-06 00:09:46 +00:00
florian
d6378b5278 [mcs814x] add some ohci workarounds to make ohci work 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33323 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-05 20:19:29 +00:00
juhosg
dddb52eedf ramips: Add missing andmask to ramips_esw register read for recv_good value. 
Add missing andmask to ramips_esw register read for recv_good value.

Without the mask, recv_bad leaks into the recv_good packet count.
Didn't notice the bug before since you don't usually get bad
packets, so I only saw it when I was playing with overlength packets
earlier...

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33322 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-05 20:08:43 +00:00
juhosg
07073dcb27 ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. 
Use doubletagging to disable ramips_esw vlan by default, it seems
more reliable.

Daniel Golle found an issue where sometimes (possibly only for
RT3352) the default vlan disable method (clearing en_vlan, untag,
doubletag and putting all ports into vlan 0) doesn't work and the
packets get sent out vlan-tagged with vlan 0.

Instead switch to using the doubletagging method (allow doubletagged
packets, put all ports into vlan 0 with untag enabled) by default.

Unless someone figures out a way to really globally disable vlan for
this switch, this seems like the best (most reliable) option.

I did some tests regarding maximum packet size and did not see any

difference between the two methods, both allow for slightly bigger packets
than the ramips_main.c ethernet driver (ping stops going through
above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until
"ping -s 1490", or about 1532 bytes).

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33321 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-05 20:08:42 +00:00
blogic
e937e774c9 [x86] add missing kvm_guest kernel options 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33319 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-05 19:38:42 +00:00
juhosg
34d7147aef ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33318 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-05 19:26:50 +00:00
juhosg
b4336504ba ar71xx: add rssileds to package set in profile for devices which got them. 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33317 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-05 19:22:51 +00:00