qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-26 03:18:59 +02:00
Code
22,416 Commits 13 Branches 0 Tags 117 MiB
12750dc9c5
Commit Graph

8821 Commits

Author SHA1 Message Date
juhosg
1047651f0e ramips: sysupgrade for ESR-9753 
This patch add sysupgrade for Engenius ESR-9753

Signed-off-by: Artur Wronowski <arteqw@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29824 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-20 10:49:26 +00:00
jogo
2ea3aaed73 kernel: fix OCF for linux 3.2 
Add skb_frag_page from 3.2 to OCF for 3.1 and earlier and use it.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29818 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-19 19:51:54 +00:00
jow
d5a63cc211 [adm5120] add missing kernel symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29790 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-19 01:57:22 +00:00
jow
429edf765e Make the grub timeout configurable on x86 targets 
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29786 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-19 01:14:45 +00:00
jow
62b26e2933 x86/config-3.2: add linux-3.2 symbols for x86 
The following symbols are missing for x86, in sorted order.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29783 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-19 00:31:39 +00:00
florian
60e384d276 [kernel] fix thinko in 102-ehci_hcd_ignore_oc patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29773 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-18 07:56:02 +00:00
blogic
220fd247bc [lantiq] gigaset 76x 
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29763 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-17 12:10:35 +00:00
blogic
03810204dc ramips: Rework ramips_eth to not require irqsave locking anymore 
Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.

This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29762 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-17 11:23:11 +00:00
hauke
079a3384c5 brcm47xx: add support for kernel 3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29756 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-15 21:18:34 +00:00
hauke
da271c7332 brcm47xx: run kernel_oldconfig 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29755 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-15 14:53:32 +00:00
kaloz
6ca687282b [target/omap4]: add support for OMAP4 based boards, starting with the PandaBoard 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29753 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-14 23:02:56 +00:00
kaloz
399f89c7fc [generic/3.2]: fixup arm xz support with recent changes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29750 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-14 22:55:04 +00:00
kaloz
e20c35f54d [generic/3.2]: add missing symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29749 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-14 22:53:28 +00:00
nbd
2b1f20d73e kernel: disable bridge igmp snooping in 3.2 as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29747 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-14 14:57:03 +00:00
nbd
10b3a6c001 kernel: disable bridge igmp snooping by default to avoid multicast issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29744 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-14 13:50:25 +00:00
jogo
4773b5ef82 kernel: ppc40x: ppc44x: add missing kernel config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29742 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-14 12:04:17 +00:00
hauke
01cb3619d3 brcm47xx: update usb driver 
Add workarround for BCM5357 and BCM4749.

This patch contains the following fixes from George Kashperko:
* separate subroutines for controller initialization workarounds -
   following CodingStyle recommendations;
* __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG;
* fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being
   kmalloc'ed is never freed anywhere while platform_device_add_resources
   will kmemdup resources right away;
* fix compilation error in ssb_hcd_resume - it will fail as soon as
   CONFIG_PM is selected.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29734 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 20:11:23 +00:00
jow
3651d1c332 [generic] rtl8366: fix rtl8366_smi_detect() after r29677 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29732 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 19:17:58 +00:00
jogo
504d88e2ae brcm63xx: add support for linux 3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29731 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 14:59:50 +00:00
jogo
04e6d374b6 kernel: add support for linux 3.2.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29730 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 14:55:07 +00:00
jogo
d828d77b46 kernel: backport overlayfs v11 to 3.0 and 2.6.39 
Should fix whiteout issues and missing files when using extroot.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29727 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 14:42:53 +00:00
jogo
f1f885a356 kernel: update linux 3.1 to 3.1.9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29726 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 14:38:28 +00:00
jogo
6b4b162100 kernel: update linux 3.0 to 3.0.17 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29725 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 14:10:44 +00:00
nbd
63c3f72940 ar8216: use vlan configuration for connecting ports (forced to be untagged) even with vlan_enable=0, but keep them isolated before the switch has been configured 
this makes enable_vlan=0 practical for vlan passthrough

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29719 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-12 10:15:11 +00:00
nbd
25b268205a ar8216: do not strip vlan tags when running with vlan_enable=0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29718 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-12 10:15:08 +00:00
juhosg
1b3efb3352 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29713 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 18:00:50 +00:00
cshore
efab389042 [brcm63xx] Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29712 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 13:47:48 +00:00
juhosg
74844fd50b ar71xx: disable ath79 in order to get rid of Kconfig warnings 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29711 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:19 +00:00
juhosg
6734a832bc ar71xx: pb44_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29710 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:18 +00:00
juhosg
7bb349bc59 ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:17 +00:00
juhosg
ddfc10f668 ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29708 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:15 +00:00
juhosg
3e74da5245 ar71xx: ar71xx_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29707 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:14 +00:00
juhosg
8e61fd2405 ar71xx: ar71xx_spi: save and restore regs from probe/remove 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:13 +00:00
juhosg
302dc3a936 ar71xx: ar71xx_wdt: add shutdown handler 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:11 +00:00
juhosg
0dad098602 ar71xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29683 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:43 +00:00
juhosg
e1a6e8b311 ar71xx: add a profile and build images for the TL-WR2543N/ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29682 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:42 +00:00
juhosg
19be413163 ar71xx: add initial support for the TL-WR2543N/ND board 
The WLAN LEDs are not working yet.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:35 +00:00
juhosg
3e84f7b9f1 ar71xx: allow to specify max read size for m25p80 
Reading from the flash chip on the TL-WR2543ND seems buggy.
If the SPI flash driver tries to read too much data in one
SPI transfer, the flash chip returns bogus values. This can
be caused by a buggy flash chip on my board, or it can
be a bug in our SPI driver.

Add a workaround to the m25p80 driver until I find out the
root cause of the problem. The patch allows to specify the
maximum numner of bytes which can be read safely withint
one SPI transfer.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29679 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:33 +00:00
juhosg
55772106df generic: add driver for the RTL8367R/M switches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29678 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:31 +00:00
juhosg
d80f2ee46b generic: rtl8366: preparing for RTL8367 support 
* make clock delay configurable
* make read,write commands configurable
* use u16 for member and untag fields

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29677 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:30 +00:00
juhosg
d43b4effd9 generic: rtl8366_smi: add timeout message 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29676 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:25 +00:00
juhosg
54bc3d42c4 ar71xx: local mac support on the wndr3700 
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29675 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 17:24:44 +00:00
juhosg
c2243d1fb9 generic: improve MIPS kexec support 
It is based on patches from the linux-longsoon-community git tree:
http://dev.lemote.com/cgit/linux-loongson-community.git/

Now the kernel can use the command line parameter from kexec-tools.

Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped
before executing the new kernel). Compile tested with lantiq (3.1.4)
and brcm47xx (3.0.12).

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29674 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 16:29:16 +00:00
juhosg
66663e2809 ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29672 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-06 15:54:59 +00:00
juhosg
01c809eff1 ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-06 07:20:59 +00:00
juhosg
4c93839943 ar71xx: fix RB-750 network configuration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29668 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-06 07:20:54 +00:00
juhosg
c63a29ee7f ar71xx: fix sections mismatch warnings in the nand drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29667 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-05 18:08:33 +00:00
juhosg
978d04d680 ar71xx: fix LED configuration on the RB-750 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29666 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-05 18:08:28 +00:00
juhosg
6c8dc3bd72 ar71xx: create profile and build image for the ALFA AP96 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29663 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 21:13:57 +00:00
juhosg
b8e2e95b70 ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 21:13:54 +00:00
juhosg
3d14a486be ar71xx: specify console kernel parameter for the Compex boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29660 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:59 +00:00
juhosg
86c95a9481 ar71xx: allow to use the command line hack on compex devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29659 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:58 +00:00
juhosg
bf238aa8e9 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:57 +00:00
juhosg
c96ab77e4e ar71xx: show correct model name on TL-WA701N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29657 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:55 +00:00
juhosg
06483eda3d ar71xx: add profile and build image for the TL-WA701N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29656 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:54 +00:00
juhosg
342be7abf7 ar71xx: fix network configuration for the TL-WA901N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29654 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:52 +00:00
juhosg
9229d15c65 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:50 +00:00
juhosg
28c6546050 ar71xx: add default LED configuration for the TL-MR3020 
Also use the system LED for diagnostic.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:49 +00:00
juhosg
2b1cf2b32c ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:47 +00:00
juhosg
7e491e9a72 ar71xx: use the new om-watchdog package for OM2P 
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29648 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:41 +00:00
jow
8b51caf859 [netfilter] remove current RTSP support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29643 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 00:29:29 +00:00
jow
8f76f46fa3 [generic] backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802) 
commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals)
forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a
packet (from another flow) was dropped, leading to various problems.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29642 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-03 23:08:15 +00:00
juhosg
ced006ab54 ar71xx: add profile and build factory image for the Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:29 +00:00
juhosg
adfe1a4686 ar71xx: build images for the ALFA Network N2/N5 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29636 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:28 +00:00
juhosg
fd1bdc7c45 ar71xx: add support for the ALFA Network N2/N5 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:25 +00:00
juhosg
a604775f66 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:46 +00:00
juhosg
5a33add62c ar71xx: enable SWCONFIG_LEDS 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29630 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:40 +00:00
juhosg
55894a40aa kernel: swconfig: introduce a generic switch LED trigger 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29627 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:30 +00:00
juhosg
b042bd4e4d ar71xx: ag71xx: implement get_port_{link,stats} callbacks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:26 +00:00
juhosg
c400bf085d kernel: swconfig: add get_port_{link,stats} callbacks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29625 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:24 +00:00
juhosg
096af0d2e8 ar71xx: fix LEDs on the WRT400N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 13:54:11 +00:00
juhosg
c1be681672 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board 
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29617 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-28 08:43:43 +00:00
juhosg
71c649d097 ramips: rt288x: change base address and window size of flash bank 0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29616 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-28 08:43:36 +00:00
juhosg
0cbcd33f32 ramips: rt305x: add support for the ALFA Networks W502U (R36) board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29615 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-28 08:43:32 +00:00
juhosg
0d1ced0ac9 ar71xx: enable sysupgrade support for airrouter 
Works for me! ;-)

Patch-by: Russell Senior <russell@personaltelco.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29614 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-27 16:59:43 +00:00
juhosg
2eb905f8ba ar71xx: fix sysupgrade on PB42/PB44 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29613 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-27 16:57:01 +00:00
juhosg
66769bfe50 ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-27 16:56:30 +00:00
jow
2c7dddc2ce [generic] add missing config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29610 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-25 13:33:18 +00:00
hauke
71a38e2476 brcm47xx: fix usb on more recent bcma based devices. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29605 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-23 17:21:52 +00:00
juhosg
b95eb02775 ramips: initial support for Sitecom WL-351 v1 002 
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-23 14:27:16 +00:00
juhosg
a46cfc6bcc ramips: add support for the Senao/EnGenius ESR-9753 board 
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-23 14:27:10 +00:00
juhosg
f3c0d1bebb ramips: define firmware partition for Omnima MiniEMBWiFi 
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29602 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-23 14:27:05 +00:00
nbd
2ca2cb6c37 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-22 05:43:53 +00:00
jogo
c5ceea4e34 ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H 
Thanks netprince for reporting and testing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-21 19:32:40 +00:00
jow
674429b24f [ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-21 01:27:48 +00:00
hauke
84d175a3f2 brcm47xx: remove patch starting adding brcm4716 to ssb 
brcm4716 is supported by bcma now we do not need this patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29576 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 23:55:20 +00:00
hauke
9da7868465 brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. 
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29575 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 23:39:13 +00:00
hauke
a604d7454c kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29574 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 23:33:03 +00:00
hauke
84ddb1a863 brcm47xx: remove support for kernel 2.6.39 
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29573 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 23:26:15 +00:00
nbd
eaf9c95caf ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 09:04:15 +00:00
nbd
cdf64b5cdc ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-18 22:20:17 +00:00
juhosg
c0f6abcdc6 ar71xx: use 64kraw template on more TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-17 18:49:55 +00:00
juhosg
12930c3272 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:38 +00:00
juhosg
ba50354437 ar71xx: add defines for the AR934X GMAC interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:36 +00:00
juhosg
a55b188ebe ar71xx: fix GMAC1 interface speed on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:35 +00:00
juhosg
8e8e3fdde7 ar71xx: ag71xx: fix switch port setup for AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:32 +00:00
juhosg
07d1bcb923 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:30 +00:00
juhosg
cb5f456a33 ar71xx: ag71xx: setup switch interface mode on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:29 +00:00
juhosg
f97a00297e ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:28 +00:00
juhosg
e61b2d1ed9 ar71xx: allow to attach the internal switch for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:22 +00:00
juhosg
812763d48e ar71xx: introduce ar71xx_switch_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:11 +00:00
juhosg
867f0fa967 ar71xx: build images for TL-WR741N/ND v2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:48 +00:00
juhosg
60c6b42122 ar71x: use raw squashfs images for TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:46 +00:00
juhosg
6c3fe396cd ar71xx: create a template for using unpadded squashfs images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:45 +00:00
juhosg
f2945360c1 ar71xx: put squash image right after the kernel on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:44 +00:00
juhosg
57705b7a08 ar71xx: tplinkpart: allow to detect JFFS2 as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:40 +00:00
juhosg
08d268c8a7 ar71xx: ag71xx: check PHY IDs before accessing the switch registers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:23 +00:00
juhosg
a82d9221c9 ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:21 +00:00
juhosg
ba116ade9e ar71xx: ag71xx: nuke ar7240sw_init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:20 +00:00
juhosg
803afe6e40 ar71xx: fix mac addresses on jjPlus devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:18 +00:00
juhosg
032d881496 ar71xx: build image for the Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:11 +00:00
juhosg
d8f4833329 ar71xx: add support for ALFA Network's Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:10 +00:00
juhosg
33334db9dc ar71xx: add GPIO function bit defines for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:07 +00:00
juhosg
2b913567e8 ramips: add support for Omnima MiniEMBWiFi board 
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:51:26 +00:00
nbd
5841748e56 ar71xx: fix gpio count for ar7241/ar7242 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:47:24 +00:00
nbd
75bbe95c04 ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:21:42 +00:00
nbd
dcf5cd5fc2 ath9k: add support for registering extra leds connected to the wmac gpio lines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29530 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:21:36 +00:00
juhosg
8b3380fefc ar71xx: get rid of squashfs-4k images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 20:41:24 +00:00
juhosg
05535c2766 generic: disable 'small sector' erase in m25p80 driver 
This fixes the issues with the jffs2 images on various boards. Using
JFFS2 on devices with 4KiB erase sectors is not safe:
http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29521 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 20:41:22 +00:00
nbd
340372534c kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29516 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 15:14:59 +00:00
nbd
e7bf9d2f6d ar71xx: fix wireless led on wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 15:00:43 +00:00
juhosg
17595c4da2 ar71xx: enable AR9341 support at setup.c 
Patch-by: dyq <729650915@qq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 14:59:43 +00:00
juhosg
6caa8876b2 ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 14:59:40 +00:00
nbd
ec66b62afa ar71xx: add gpios and usb for wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29509 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 13:33:44 +00:00
juhosg
1e26277d1e ar71xx: use RedBoot parser on PB44 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29501 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-11 15:52:47 +00:00
blogic
6e7fe5572c [atheros] convert to gpiolib 
Signed-off-by:	karlp@tweak.net.au

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-09 07:52:10 +00:00
juhosg
aa54ff79a0 ar71xx: fix WNDR3x00 factory image generation 
Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs
for the device: field in their DNI tags, not WNDR3700.

This regressed in r29434, which redid WNDR3x00 model detection. The sixth
parameter to Image/Build/Netgear is only used as the -B argument to
mkdniimg, which is used to set the device: field. In r29434, this was
erroneously changed to be WNDR3700 for all models. The tools to flash
factory images (U-Boot's TFTP server and the factory software's upgrade
utility) may refuse to honor images with incorrect device: fields in their
DNI tags.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29473 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-07 06:55:50 +00:00
juhosg
e310d5b786 ar71xx: fix WNDR3x00 model detection 
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset
56 in the art (caldata) mtd partition.

r29434 redid WNDR3x00 model detection, attempting to distinguish between
WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it
contained a bug: it put the awk inside a $(...), with the result that all
WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch
checks the model name stored in the art partition, as is done by U-Boot
shipping on the WNDR3800. It has the likely advantage of working with
future models based on the WNDR3700 board. It also will not mis-detect
units on which people install more memory.

I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29472 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-07 06:55:39 +00:00
juhosg
9de4cb5314 ramips: fix mac addresses on the DIR-300/600 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29471 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 20:06:08 +00:00
jogo
87cb2a5585 linux: update 3.1 to 3.1.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29470 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 19:50:30 +00:00
jogo
9556c47348 linux: update 3.0 to 3.0.12 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29469 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 19:50:25 +00:00
juhosg
56124f8782 ar71xx: create firmware image for the TL-WR740N/ND v4 boards 
Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29468 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 16:26:44 +00:00
juhosg
a00ddbec78 ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29467 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 16:26:43 +00:00
juhosg
8e71900eeb ar71xx: fix TL-MR3x20 profile names in image/Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29463 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 13:53:21 +00:00
juhosg
05a6361449 ar71xx: cleanup TP-Link profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29461 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 10:29:25 +00:00
juhosg
ae0a750c4b ar71xx: add TP-Link board detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29459 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:11:01 +00:00
juhosg
99997320ea ar71xx: use correct mac on the lan interface on several TP-LINK devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:10:58 +00:00
juhosg
a97fd90341 ar71xx: allow to pass negative offset values for ar71xx_init_mac 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29457 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:10:55 +00:00
juhosg
097436bca8 ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29456 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 18:21:15 +00:00
juhosg
f6ab961f67 ar71xx: verify hardware id of firmware images on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29455 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 18:11:51 +00:00
juhosg
6f27fcc4b0 ramips: set mac addresses for the NBG-419N 
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:07 +00:00
juhosg
0a03c64116 ramips: set preinit interface mac on the hw550-3g board 
Based on a patch by Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29453 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:06 +00:00
juhosg
d7a5a32c17 ramips: use ramips_get_mac_* functions in the preinit script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29452 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:04 +00:00
juhosg
e595553be8 ramips: move ramips_get_mac_* functions to lib/ramips.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29451 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:03 +00:00
juhosg
5db41b5518 ramips: add ramips_ prefix to get_mac_{binary,nvram} functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:02 +00:00
juhosg
8b0e381068 ramips: fix network configuration setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29448 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 16:54:48 +00:00
juhosg
baf6222ae5 ar71xx: reclaim some unused space on TP-Link boards 
With the default OpenWrt configuration, this increases the size
of the rootfs_data partition by 384KB/128KB on the older/newer
TP-Link models.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:36 +00:00
juhosg
35606f14a3 ar71xx: check squashfs signature in TP-Link mtd parser 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:33 +00:00
juhosg
7b716ce3ec ar71xx: use the lzma-loader on TP-Link boards w/o lzma support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29444 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:28 +00:00
juhosg
057c5990c9 ar71xx: add lzma loader 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29443 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:25 +00:00
nbd
c1679af6b3 ar71xx: add preliminary support for wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:20:51 +00:00
nbd
f684eb2454 ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:20:44 +00:00
juhosg
44a7438217 ar71xx: rewrite WNDR3700/3800 handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 13:03:54 +00:00
jow
62f688b6ec [ar71xx] add some missing wndr3800 base-files definitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29433 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 12:56:21 +00:00
juhosg
1f7d4ca407 ar71xx: change user-space board detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29432 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 12:56:20 +00:00
juhosg
71573bb739 ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29431 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 12:47:53 +00:00
juhosg
974654e8c5 ramips: fix argus board rootfs size 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29422 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-04 15:24:57 +00:00
juhosg
11a837ce02 ar71xx: use the tp-link parser on the tp-link boards 
Also remove static partition maps.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29416 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:31 +00:00
juhosg
17c2fb2fc8 ar71xx: add mtd partition parser for the TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29415 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:27 +00:00
juhosg
37a46ae9f4 ar71xx: run the RedBoot parser only on the RedBoot based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29414 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:25 +00:00
juhosg
23c921bb91 ar71xx: run the MyLoader parser only on the WP543 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29413 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:23 +00:00
juhosg
4dbb6eef31 ar71xx: run the wrt160nl parser only on the WRT160NL board 
Also remove static mtd partition definitions.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29412 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:20 +00:00
juhosg
8c130c871f ar71xx: allow to pass part_probe types to the m25p80 driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29411 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:18 +00:00
juhosg
4a763a41d3 ar71xx: create initramfs images for the newer TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29410 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:57:23 +00:00
juhosg
3a0d11139d ar71xx: remove swconfig and wpad-mini from custom profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29408 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:33:41 +00:00
juhosg
1a3e21a48d ar71xx: add uboot-envtools to the default package list 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29407 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:33:40 +00:00
juhosg
7d80e1897f ar71xx: reclaim unused space in WNDR3700/3800 images 
Patch by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29406 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:33:38 +00:00
juhosg
f688ec4123 ar71xx: add a profile and build image for the OM2P board 
[juhosg: the name of the final image has been changed to
'openwrt-ar71xx-generic-om2p-squashfs-factory.bin']

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29397 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:49:05 +00:00
juhosg
41d8ed17e0 ar71xx: add support for Ubiquiti AirRouter 
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:49:02 +00:00
juhosg
8d3dba5fca ar71xx: configure default led behavior for the OM2P 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29394 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:59 +00:00
juhosg
216fce04c3 ramips: enable sysupgrade on the RT-N15 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29393 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:58 +00:00
juhosg
a24e101ea6 ramips: wrap long line in platform upgrade script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29392 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:57 +00:00
juhosg
7a1df0165f ramips: add profile for the Asus RT-N15 
This uses previously submitted rtl8366 kernel packages.

[juhosg: The kmod-gpio-dev package has been removed from the package list.]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29391 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:55 +00:00
juhosg
3c681484c2 ramips: setup default network configuration for RT-N15 
Based on a patch by Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29390 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:54 +00:00
juhosg
53a1653b16 ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile 
It is needed by the RT-N15 board.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29389 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:53 +00:00
juhosg
52d2b347d2 ramips: remove default network configuration, and generate that from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29387 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:51 +00:00
juhosg
a0f4e5c8de ramips: use /lib/functions/uci-defaults.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29386 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:48 +00:00
juhosg
2a4fea0542 ar71xx: use /lib/functions/uci-defaults.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29385 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:47 +00:00
juhosg
0c608fa18a ramips: simplify uci-defaults/network script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29383 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:45 +00:00
juhosg
a77cc3e6c0 ramips: setup mac and network interfaces from separate functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29382 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:43 +00:00
juhosg
bee289fa27 ramips: fix Asus RT-N15 board support 
Fix Asus RT-N15 flash partitions and make an image.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29381 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:42 +00:00
juhosg
fc0b7d945e ramips: Sparklan wcr-150gn board fixes 
* Fix partition sizes.
 * Add buttons and leds.
 * Register usb.
 * Remove unnecessary stuff from image Makefile
 * Fix rt2x00 eeprom extract.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29380 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:41 +00:00
juhosg
dbcdc67e0e ramips: fix package name of kmod-input-gpio-buttons 
Based on a patch from Omnima Limited.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29379 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:39 +00:00
juhosg
63abf5ef7d ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29378 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:38 +00:00
juhosg
1fe43c4a68 ramips: setup bc2 mac addresses from the generic network script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29377 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:37 +00:00
juhosg
f9f721e5ba ramips: combine network setup for all boards in one file 
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.

[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29376 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:35 +00:00
blogic
cb73b00a8f omap24xx: bump to 3.1.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29349 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-28 12:46:18 +00:00
blogic
e179d6ac25 lantiq: bump to 3.1.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29348 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-28 10:22:58 +00:00
nico
db98388370 targets: fix CONFIG_USB_STORAGE_* inconsistency 
* all options were switched from bool to tristate in 2.6.30
 * add/change/move them to generic, disabled by default
 * remove extinct CONFIG_USB_STORAGE_DPCM dropped in 2.6.29, merged with CONFIG_USB_STORAGE_SDDR09
 * remove extinct CONFIG_USB_STORAGE_SIERRA option in 2.6
 * cleanup ordering

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-25 20:47:44 +00:00
juhosg
e6638f1bd3 ar71xx: modify phy mask of the WP543 board 
This fixes ethernet on newer boards. Based on a patch from #9702.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29328 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:43 +00:00
juhosg
4baa5f5378 ar71xx: fix wndr3800 machine name 
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29326 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:38 +00:00
juhosg
31fef29134 ar71xx: copy atheros initramfs images to the image directory 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29325 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:35 +00:00
juhosg
1427b1d16a ar71xx: specify mtd layout in command line for the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29324 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:32 +00:00
blogic
d60e82238b lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch 
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29294 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-23 12:22:15 +00:00
blogic
bdfc7e8894 lantiq: 
* fixes ath5k eeprom handling
* fixes sx76x
* adds sx76x to userland api
* minor style cleanups

Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29292 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-22 18:50:51 +00:00
florian
9f67405758 [brcm63xx] don't package gpioctl by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29288 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-21 16:36:39 +00:00
nico
90143b9cd2 target/uml: export atomic64_* functions on 32-bit x86 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29287 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-21 14:28:33 +00:00
juhosg
74bada8592 ar71xx: set GE0 phy_mask for AR933x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29274 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-20 11:30:10 +00:00
jow
9ffbe98bd5 [brcm63xx] fix D-Link DSL-2650U image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29266 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-19 21:34:51 +00:00
jogo
fff36017cf linux: update 3.0 to 3.0.9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29264 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-19 18:39:12 +00:00
florian
caca8eaab1 [brcm63xx] build images for D-Link DSL-2650U (#9003) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29238 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-18 10:37:03 +00:00
mb
9460bebd64 omap24xx: Fix cbus nested IRQ acking 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29237 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 22:31:27 +00:00
mb
8a2f3bb99b omap24xx: Fix initialization of software IRQ mask 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29236 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 21:02:00 +00:00
mb
4130c70e12 omap24xx: Update 3.1 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29234 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 19:35:57 +00:00
mb
23c1db706e omap24xx: Some retu/tahvo IRQ fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29233 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 18:06:19 +00:00
mb
fd34842997 omap24xx: Add basic kexec fixes. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29232 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 14:57:34 +00:00
mb
53a62e28c0 omap24xx: Add workaround for omapfb locking bug. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29201 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-16 22:34:38 +00:00
mb
5fa3b37006 Revert r29193 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29195 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-16 19:03:23 +00:00
mb
bfa3523244 omap24xx: Set platform specific optimization flags 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29194 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-16 19:02:12 +00:00
mb
fa3d2d4445 n810: Add xmodmap to profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29193 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-16 19:01:19 +00:00
florian
f2c319545c [rdc] include bridge and 8021q modules by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29164 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-15 22:24:22 +00:00
blogic
5df57010b8 lantiq: add runtime generation of /etc/config/network 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29161 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-15 18:21:00 +00:00
blogic
8b1ffd8dab lantiq: fix falcon build breakage 
dev-wifi-rt2x00 fails to build on falcon due to missing pci

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29129 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 18:55:58 +00:00
juhosg
2ba51b8c17 ar71xx: fix USB LED on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29126 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:15 +00:00
juhosg
8f09b983e5 ar71xx: add a function for selecting output signal on a given GPIO pin 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:14 +00:00
juhosg
95684215c0 ar71xx: fix GPIO function handling on AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29124 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:13 +00:00
juhosg
73b96446ee ar71xx: add AR71XX_ prefix to GPIO_REG_* defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29123 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:11 +00:00
juhosg
d9b73ec674 ar71xx: merge nand scan patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29122 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:10 +00:00
juhosg
b9c4475b88 ar71xx: fix a compiler warning 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 13:07:47 +00:00
juhosg
e8a5cbc660 ar71xx: fix GPIO count for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29109 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 13:07:45 +00:00
juhosg
2f0405019f ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29108 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:53 +00:00
juhosg
c86a746ece ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29107 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:51 +00:00
juhosg
c6f1eddcdf ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29106 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:49 +00:00
juhosg
de73b57f12 ar71xx: add an irq parameter for ar724x_pcibios_init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29105 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:47 +00:00
juhosg
1937a07a4e ar71xx: remove hardwired interface parameters from mach-* files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29103 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 07:38:09 +00:00
juhosg
2b0cd69920 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 07:38:07 +00:00
juhosg
7f6b8dc9f4 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29101 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 07:38:05 +00:00
florian
5c52fb2bb6 [brcm63xx] build images for Pirelli A226M (#10409) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29045 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:22 +00:00
florian
3b6e0584f5 [brcm63xx] register uart0 on DWV-S0 boards (#10409) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29044 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:18 +00:00
florian
6916a71abc [kernel] refresh 3.0 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29043 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:14 +00:00
florian
dee25761b4 [kernel] refresh 2.6.39 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29042 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:10 +00:00
florian
48f5336885 [brcm63xx] rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29041 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:05 +00:00
florian
209699c72b [rdc] fix typo, load ip17xx switch module 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29039 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 18:41:26 +00:00
juhosg
f0f8408f20 ar71xx: enable has_gbit flag on AR724{0,1} 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29026 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 17:36:36 +00:00
juhosg
5e68925d9a ar71xx: fixup onboard PCIe chip registration on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29022 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 12:48:03 +00:00
juhosg
cf53375340 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29021 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 12:48:01 +00:00
juhosg
3095cc8090 ar71xx: ag71xx: add support for getting switch port link status 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29017 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:04 +00:00
juhosg
7ea3800d31 ar71xx: remove mii_ctrl resources of the ethernet devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29016 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:03 +00:00
juhosg
451654dc3a ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29015 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:01 +00:00
juhosg
749767a552 ar71xx: ag71xx: remove unused mii_cfg related functions and defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29014 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:00 +00:00
juhosg
228681e328 ar71xx: set MII interface speed from the set_speed callbacks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29013 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:59 +00:00
juhosg
7571fae3ab ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data 
Also rename the corresponding callback functions.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29012 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:57 +00:00
juhosg
95d3699b73 ar71xx: ag71xx: remove MII interface setup code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29011 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:56 +00:00
juhosg
13e0098939 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29010 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:54 +00:00
juhosg
4cc612872a ar71xx: fix occasional kernel hangs during boot on AR934x 
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29009 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:52 +00:00
juhosg
5fb5b4483b ar71xx: refresh kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29008 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:51 +00:00
jogo
85ec5ce98d linux: update 3.1 to 3.1.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29007 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 10:48:05 +00:00
blogic
e5c40dc4c3 lantiq: add uci-defaults code for handling leds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29004 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:21 +00:00
blogic
bddadbe32b lantiq: add /lib/lantiq.sh and make hotplug handlers use it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29003 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:16 +00:00
blogic
a8be2afd85 lantiq: rename leds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29002 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:12 +00:00