9254 Commits

Author	SHA1	Message	Date
juhosg	087640c854	ppc40x: fix build errors in the CF and ISP116X drivers ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30789 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-02 18:03:59 +00:00
florian	d45352ad01	[adm8668] mark variables as might be unused ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30787 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-02 13:23:38 +00:00
florian	8f83f6c6c3	[adm8668] remove unused variables and defines ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30786 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-02 13:23:35 +00:00
florian	057ff99ae1	[kernel/2.6.39] MIPS: fix kexec build on 64-bits targets ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30785 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-02 13:19:13 +00:00
florian	fe9bc76c6b	[kernel/2.6.39] refresh patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30784 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-02 13:19:10 +00:00
florian	e2d176b262	[kernel/2.6.39] MIPS: fix printing of size_t arg ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30783 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-02 13:19:08 +00:00
florian	ecd739427b	[kernel/2.6.37] MIPS: mark unused variables ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30782 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-02 13:19:05 +00:00
florian	ae774d3615	[kernel/2.6.37] refresh patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30781 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-02 13:19:02 +00:00
florian	8e5a93687f	[kernel/2.6.36] MIPS: mark unused variables ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30780 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-02 13:19:00 +00:00
florian	a4906e04da	[kernel/2.6.36] refresh patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30779 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-02 13:18:56 +00:00
florian	5929a7798b	[kernel/2.6.32] MIPS: mark unused variables ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30778 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-02 13:18:53 +00:00
florian	f704d60b0b	[kernel/2.6.32] refresh patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30777 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-02 13:18:47 +00:00
juhosg	78859ab57d	ar71xx: ag71xx: keep VLAN tags if VLAN is not enabled ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30768 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-01 19:49:05 +00:00
juhosg	57b73bf423	kernel: update linux 3.2 to 3.2.9 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30767 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-03-01 19:49:02 +00:00
hauke	d861364e21	brcm47xx: use kernel 3.2 by default ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30751 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-28 20:12:46 +00:00
jow	61489954f3	[generic] revert unrelated change in previous commit ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30738 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-27 09:34:31 +00:00
jow	294b1ab0fc	[generic] partly revert r30708, it breaks various arches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30737 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-27 09:33:36 +00:00
juhosg	c369186781	ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loop ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30733 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-26 10:54:13 +00:00
juhosg	bcc8770afa	ramips: raeth: add rx_info structure ... This helps to reduce code size on RX path: add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12) function old new delta ramips_eth_open 1104 1144 +40 ramips_ring_free 212 232 +20 ramips_eth_stop 400 408 +8 ramips_eth_rx_hw 648 592 -56 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30732 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-26 10:54:12 +00:00
juhosg	c3157bd40e	ramips: raeth: add tx_info structure ... This helps to reduce code size on TX path: add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36) function old new delta ramips_eth_open 1048 1104 +56 ramips_eth_tx_housekeeping 156 148 -8 ramips_ring_free 224 212 -12 ramips_eth_stop 420 400 -20 ramips_eth_hard_start_xmit 480 428 -52 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30731 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-26 10:54:10 +00:00
nbd	adfe634bb8	ixp4xx: fix a compile error ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30728 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-25 22:12:11 +00:00
jow	1c824716f1	[generic] add some missing 2.6.39 kernel symbols observed on x86/generic builds ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30718 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-25 13:17:32 +00:00
jow	eb0c9b79d7	[x86] enable RTC_CLASS for Linux 3.2 and 3.3 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30717 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-25 13:06:26 +00:00
juhosg	b83545fa99	ramips: raeth: don't process disabled interrupts ... Also rename the 'fe_int' variable. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30713 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-25 11:59:19 +00:00
juhosg	ebeffb64e9	ar71xx: use v6.0.0 in UBTN-XM firmwares (closes #11038) ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30712 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-24 20:41:38 +00:00
juhosg	86f0a453a3	ramips: fix FONERA20N image generation ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30710 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-24 16:18:46 +00:00
jow	73c4fa4d10	config: deprecated symbol CONFIG_LEDS_GPIO_PLATFORM ... CONFIG_LEDS_GPIO_PLATFORM went away a while ago. http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commit;h=2bcc7ed5b83b0a59c6976476e8788675038fb11b Also, most platforms comment out CONFIG_LEDS_GPIO but not x86 for some reason. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30708 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-24 10:35:20 +00:00
juhosg	e59f7e59ce	ramips: image: increase minimum kernel partition size to 896k ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30706 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 19:58:16 +00:00
juhosg	aef9836e3e	ramips: image: cleanup and sort templates/profiles ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30705 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 19:58:15 +00:00
juhosg	3512e35131	ramips: image: use GENERIC_4M template for the ALL0256N board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30704 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 19:58:14 +00:00
juhosg	3bc6de1a9c	ramips: image: introduce mkmtd/{,phys,spi} helpers ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30703 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 19:58:12 +00:00
juhosg	8674a3608c	ramips: image: pass mtdlayout variables by value ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30702 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 19:58:11 +00:00
juhosg	1a418e58fd	ramips: image: merge F5D8235V{1,2} templates ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30701 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 19:58:10 +00:00
juhosg	2114850f4f	ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30700 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 19:58:07 +00:00
juhosg	de6db64de9	ramips: image: introduce mkcmdline helper ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30699 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 19:58:06 +00:00
juhosg	c329c451b2	ramips: image: use the GENERIC_4M template for the V11ST-FE board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30698 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 19:58:04 +00:00
juhosg	550d82fa19	ramips: image: simplify Makefile a bit ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30697 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 19:58:03 +00:00
juhosg	77394481fe	ramips: image: add MkImageLzma wrapper ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30696 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 19:58:02 +00:00
juhosg	eada36fe53	ramips: image: allow to build board specific initramfs images ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30695 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 19:58:01 +00:00
blogic	2f20008d73	[atm] drop backported patches as they cause regressions and oopses ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30690 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 07:42:04 +00:00
blogic	1863b32a32	[lantiq] fixes etop locking issue ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30689 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-23 07:42:00 +00:00
juhosg	f8f3c2b274	ramips: merge identical switch configuration entries ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30688 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-22 19:46:19 +00:00
juhosg	180721623a	ramips: use unified switch identifiers in uci-defaults/network ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30687 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-22 19:46:17 +00:00
juhosg	88c727bd85	ramips: fix VLAN config of the RT-N15 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30686 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-22 19:46:15 +00:00
juhosg	edd0b0744e	ramips: raeth: show interrupt statistics in debugfs ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30681 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-22 13:06:44 +00:00
juhosg	fe2aef1465	ramips: raeth: add debugfs support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30680 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-22 13:06:42 +00:00
juhosg	487e30dc6b	ramips: raeth: rename main source file ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30679 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-22 13:06:41 +00:00
juhosg	8b52220866	ramips: raeth: add missing Kconfig and Makefile ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30671 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-21 09:44:30 +00:00
juhosg	3ac2b4e29a	ramips: move the ethernet driver into a separate directory ... Also clean up the Kconfig symbols. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30670 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-21 09:26:43 +00:00
juhosg	d7185880b9	ramips: rename the spi driver ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30669 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-21 09:26:41 +00:00
nbd	70862d497d	ar71xx: switch to kmod-gpio-button-hotplug ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30660 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-20 10:51:48 +00:00
nbd	1002850a01	kernel: strip unnecessary symbol table information from kernel modules, reduces default squashfs size on ar71xx by about 4k ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30657 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-20 09:03:17 +00:00
juhosg	342ac43e68	ramips: rt3883: make rt3883_nand_data visible ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30655 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-19 19:40:37 +00:00
juhosg	5b5e6922c6	ramips: merge 3.2 fixes ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30652 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-19 17:52:23 +00:00
juhosg	5e8b0f2f94	ramips: nuke 2.6.39 support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30651 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-19 17:52:20 +00:00
juhosg	e1527acc5f	ramips: rt305x: nuke built-in MTD partition maps ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30650 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-19 17:52:15 +00:00
juhosg	058c28d6fe	ramips: rt288x: nuke built-in MTD partition maps ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30649 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-19 17:52:11 +00:00
juhosg	68d60e45f2	ramips: build sysupgrade image for the V11ST-FE board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30648 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-19 17:52:08 +00:00
juhosg	f6ba1d4f8c	ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router ... [juhosg: - don't switch back to 2.6.39 - update config-3.2 - change machine id to SL-R7205 - reorder case entries in platform scripts - remove button hotplug script] Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30645 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-19 16:44:49 +00:00
hauke	ddd5150a30	brcm47xx: add code to generate images for some netgear devices ... This is commented out until we get report of working devices. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30639 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-18 23:21:47 +00:00
hauke	035f06d698	brcm47xx: sprom for nvram parsing ... This adds support for parsing sprom form nvram for sprom version form 1 to 9. It also adds sprom from nvram support for devices on the bcma bus. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30638 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-18 23:08:26 +00:00
juhosg	7005c79799	ralink: rt3883: disable the 2GHz band on the RT-N56U ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30632 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-18 17:36:21 +00:00
juhosg	78d0623f6c	ramips: rt3883: make rt3883_wlan_data visible ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30631 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-18 17:36:16 +00:00
juhosg	694c4439dc	generic: add disable_[25]ghz to struct rt2x00_platform_data ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30630 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-18 17:36:13 +00:00
juhosg	8930617368	ar71xx: fix image signature for UBNT-XM boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30626 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-18 14:45:52 +00:00
juhosg	a03baaa96f	generic/2.6.37: fix 'set but unused' build errors on MIPS ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30615 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-17 17:21:03 +00:00
juhosg	c2da468a0c	ramips: extract eeprom for the built-in wlan module on the RT-N56U ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30604 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 20:06:22 +00:00
juhosg	37f21ebf4d	ramips: rt3883: change eeprom file name ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30603 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 20:06:21 +00:00
acinonyx	7d27a0b34d	[x86] Disable by default padding of images ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30590 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 17:54:07 +00:00
acinonyx	4916a0ea0e	[x86] Allow gzipping of squashfs images with padded jffs2 partition ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30589 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 17:54:04 +00:00
acinonyx	05c64b9247	[x86] GZip only ext4 and padded images ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30588 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 17:54:01 +00:00
acinonyx	8176b71781	[x86] Make gzipping of images configurable via menuconfig ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30587 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 17:53:57 +00:00
juhosg	a0ef5265a1	ar71xx: remove duplicated define from the D-Link profile ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30577 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 09:03:27 +00:00
juhosg	50f7b22bd7	ramips: select HW_HAS_PCI on per-board basis ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30576 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 08:17:54 +00:00
juhosg	9e8e8b51d6	ramips: rt3883: remove a stray character from rt3883.h ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30575 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 08:17:53 +00:00
juhosg	d81767c119	ramips: rt288x: don't register the PCI controller on each board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30574 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 08:17:52 +00:00
juhosg	013dc5a5d6	ramips: raeth: separate ring allocation and setup ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30573 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 08:17:50 +00:00
juhosg	5279a11d68	generic: add SND_PPC symbol ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30572 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 07:51:44 +00:00
cshore	10724eda20	[ar71xx] Add Ubiquiti UniFi Profile; It's an AP without USB so don't include USB drivers by default ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30571 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 07:45:28 +00:00
cshore	5e4fce2233	[ar71xx] d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30570 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 07:38:33 +00:00
cshore	d24315ad26	[ar71xx] Fix partitions for Cameo-based boards; kernel 3.2 is bigger ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30569 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 07:29:26 +00:00
cshore	1a609bdce0	[ar71xx] image: For Cameo-based board fix adding mtd layout to kernel commandline) ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30568 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-16 07:24:45 +00:00
jow	6a43915f2b	linux 3.2: missing generic symbols ... These symbols are dependent on CONFIG_PCI being enabled. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30565 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-15 23:37:47 +00:00
juhosg	6660855cb6	ramips: rt288x: fix PCI resource conflict ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30563 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-15 21:19:02 +00:00
florian	5ad3941a70	[ramips] correct PCI IO/Mem resource swapping ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30562 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-15 21:13:21 +00:00
florian	62c0190fa5	[ramips] add Ralink V11ST-FE board support ... This board is equipped with: - 4MB of NOR Flash - 32MB of SDRAM - IC+ IP175C switch - one Mini-PCI slot git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30561 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-15 21:13:11 +00:00
juhosg	43d6f57e67	ramips: raeth: add a helper function for skb allocation ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30555 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-15 18:33:42 +00:00
juhosg	c99c1bd913	ramips: raeth: use netdev_alloc_skb ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30554 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-15 18:33:41 +00:00
juhosg	0564ef75aa	ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures ... This helps GCC to generare more efficient code. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30553 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-15 18:33:40 +00:00
juhosg	eaae1ec1de	ramips: raeth: use 're' instead of 'priv' everywhere ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30552 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-15 18:33:38 +00:00
juhosg	d0794e0d35	ramips: raeth: force link down in ramips_phy_stop ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30550 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-15 13:47:52 +00:00
juhosg	815334db9c	ramips: raeth: serialize ramips_link_adjust calls ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30549 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-15 13:47:50 +00:00
juhosg	d214321c8c	ramips: raeth: add PHYLIB support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30547 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-15 06:47:12 +00:00
blogic	ca06b03a8e	linux-atm: update solos-pci driver to upstream ... Fixes for the solos-pci driver. - Corrects calculation of headroom for padding. - Removes pointless debug messages. - Expose Bis A and Bis M annex capabilities. - Expose hardware revision. Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30541 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 20:11:24 +00:00
blogic	12ee6100a2	linux-atm: headroom/padding fixes ... Submitted upstream to netdev by Chas Williams on linux-atm. Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30540 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 20:11:22 +00:00
blogic	6aa1eddee7	[lantiq] generate uboot environment data in target ... With this patch it is possible to generate uboot environment config file inside lantiq target. Currently it is only supporting GIGASX76X board. uboot environment config is used by fw_printenv fw_setenv tools. Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30537 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 19:07:11 +00:00
blogic	f1215ac7aa	[lantiq] fix compile error in previous commit ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30534 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 19:07:05 +00:00
blogic	61b8a7cdc6	[lantiq] Support booting the Speedport W502V using BRN-BOOT. ... While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 17:48:04 +00:00
juhosg	d54a0c39e1	ramips: extract eeprom for the PCIe wlan module on the RT-N56U ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 17:32:45 +00:00
juhosg	073aa05f36	ramips: rt3883: enable PCI on the RT-N56U board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 17:32:44 +00:00
juhosg	0dad89e259	ramips: rt3883: add PCI support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 17:32:42 +00:00
juhosg	34acde8e5f	ramips: rt3883: sync 2.6.39 config ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30526 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 17:32:41 +00:00
juhosg	5775cc2b9c	ramips: use SoC specific irq.h ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 17:32:40 +00:00
blogic	13595a7a28	[lantiq] fixes irq locking in ethernet driver ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30522 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 15:05:58 +00:00
blogic	d4d4e1aa21	[lantiq] fixes gpio_export patch ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30521 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 15:05:57 +00:00
blogic	f8d8046b51	[ltq-dsl] add annex selection support to ltq_dsl package ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30518 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-14 15:05:49 +00:00
juhosg	3c97dc485a	ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-13 17:11:58 +00:00
juhosg	a433c026e5	ar71xx: add model detection for TL-WR842N/ND ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30507 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-13 17:11:57 +00:00
florian	8ac28fce23	[malta] update to 3.2 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30503 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-13 16:05:30 +00:00
florian	3e65a7b3dd	[ar7] fix titan gpio register size ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30502 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-13 16:05:27 +00:00
juhosg	e95d1bebf7	ramips: rt3883: update package list in the default profile ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30499 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-13 15:18:05 +00:00
juhosg	2223374185	ramips: add preliminary support for the Asus RT-N56U board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30498 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-13 15:18:04 +00:00
juhosg	10a983eea1	ramips: raeth: enable MDIO code for RT3883 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30497 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-13 15:18:03 +00:00
juhosg	07c8d27309	ramips: add preliminary support for the RT3662/RT3883 SoCs ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30495 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-13 15:17:59 +00:00
florian	17d0a31e9d	[malta] add support for 3.2 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30492 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-13 12:36:34 +00:00
hauke	adf8b5a51f	brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed. ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30488 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-12 22:41:20 +00:00
hauke	e1a53dd6b0	brcm47xx: activate config bug to show warnings ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30487 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-12 22:40:01 +00:00
juhosg	71da0d9534	ramips: use GENERIC_{4,8}M image template for WR5123GN ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30483 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-12 18:04:47 +00:00
juhosg	85b1ee0e18	ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30482 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-12 18:04:46 +00:00
hauke	1b56ff8998	brcm47xx: refresh patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30481 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-12 16:45:27 +00:00
hauke	6d7798dc01	brcm47xx: update usb driver for brcm47xx. ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30480 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-12 16:38:10 +00:00
juhosg	dd584f3173	ramips: add initial support for 3.2 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30476 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-12 12:52:14 +00:00
juhosg	c9a5f3f810	ramips: include 'linux/module.h' in the ramips_spi driver ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30475 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-12 12:52:13 +00:00
juhosg	4c24144f1f	ramips: rt288x: remove per-board physmap_flash_data instances ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30474 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-12 12:52:12 +00:00
juhosg	40c07f37d9	ramips: rt305x: remove per-board physmap_flash_data instances ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30473 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-12 12:52:10 +00:00
kaloz	9701922238	[cns3xxx]: enable another l2 cache errate on newer kernels ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30472 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-12 11:22:08 +00:00
juhosg	129f9cacb9	ramips: load gpio-polled keys module ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30463 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 20:37:34 +00:00
juhosg	e24fe32095	ramips: remove yet another CONFIG_MTD_PARTITION ifdef ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30462 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 19:37:11 +00:00
juhosg	d33e1ea7fd	ramips: use gpio-keys-polled instead of gpio-buttons ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30461 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 19:37:06 +00:00
kaloz	1e4941a025	[generic/3.3]: add some missing symbols ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30460 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 18:38:28 +00:00
juhosg	baa5c31303	ramips: add MIPS platform file ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30459 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 18:16:11 +00:00
juhosg	8aed6bf98c	generic/2.6.39: refresh patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30458 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 18:16:08 +00:00
kaloz	06d33a010d	[generic/3.3]: refresh patches to -rc3 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30456 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 17:43:06 +00:00
juhosg	a6fcd662b4	ramips: add MDIO bus support for RT288X ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30455 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 16:49:56 +00:00
kaloz	c6114b60db	[cns3xxx]: rename 3.1 patches directory as it will be used for newer kernels as well ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30454 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:59:23 +00:00
kaloz	63815e7b5d	[cns3xxx]: rename 2.6.39 patches directory ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30453 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:58:14 +00:00
juhosg	3613a73356	ramips: fix Belkin F5D8235-v2 VLAN setup ... Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30452 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:31:18 +00:00
juhosg	3120faed8b	ramips: raeth: make debugging messages configurable ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30450 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:12:10 +00:00
juhosg	ad0b8c49bf	ramips: raeth: use device pointer in DMA API calls ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30449 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:12:08 +00:00
juhosg	5b41176cdc	ramips: raeth: add netdev pointer to private structure ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30448 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:12:06 +00:00
juhosg	1e38789510	ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmit ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30447 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:12:05 +00:00
juhosg	9b2ee01ff5	ramips: raeth: unmap rx DMA address in ramips_cleanup_dma ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30446 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:12:04 +00:00
juhosg	606588b4e9	ramips: raeth: add rx_dma array to store the DMA address of the rx packets ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30445 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:12:02 +00:00
juhosg	bbc71f5154	ramips: raeth: use dma_addr_t for the descriptors ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30444 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:12:01 +00:00
juhosg	cce4c079c4	ramips: raeth: unmap DMA memory when a packet is received ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30443 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:11:56 +00:00
juhosg	cd69289b3e	ramips: raeth: add a temporary pktlen variable ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30442 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:11:55 +00:00
juhosg	0e485dd80d	ramips: raeth: protect macro parameters ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30441 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:11:50 +00:00
juhosg	202c4f386c	ramips: raeth: indicate dropped packets in stats ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30440 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:11:49 +00:00
juhosg	b10ad5f4e0	ramips: raeth: use the NUM_TX_DESC for the tx_skb array ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30439 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:11:47 +00:00
juhosg	f9626b56d5	ramips: use uncached address in detect_mem_size ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30438 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:11:45 +00:00
juhosg	a88c8014e5	ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30437 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:11:43 +00:00
juhosg	2a62a21658	ramips: rt288x: remove CONFIG_MTD_PARTITION ifdefery from machine files ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30436 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:11:41 +00:00
juhosg	21cf4e76e0	ramips: refresh patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30435 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:11:40 +00:00
juhosg	7a5c327fcf	ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN ... This patch adds support for the Accton WR6202 Mini 3G broadband router. Full details for this device are available at http://www.awbnetworks.com/products03.php?Fullkey=19. This device is identical to the SMCWBR11S-3GN: http://www.smc-asia.com/products03.php?Fullkey=210 It's also worth noting that this board has a GPIO line to control the power to the USB port. [juhosg: - fix checkpatch warnings, - reorder Kconfig entry, - merge the sysupgrade patch, - add GPL header] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30434 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:11:36 +00:00
juhosg	d69d16fbbd	ramips: rt305x: merge duplicated mac address setup ... Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30433 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:11:34 +00:00
juhosg	2cc897979d	ramips: rt305x: add profile for the Belkin f5d8235v2 ... Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30432 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-11 15:11:32 +00:00
hauke	2139db24ad	brcm47xx: print the chip id and rev found by ssb and bcma ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30428 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 22:42:43 +00:00
juhosg	5d13bee59c	ar71xx: zero partition parser data in m25p80 ... Ths fixes parsing of RedBoot partitions. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30427 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 20:19:06 +00:00
juhosg	3218c675a1	ramips: fix compiler warning in prom.c ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30424 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 17:38:46 +00:00
hauke	d4a8a448fa	brcm47xx: update bcm5354 support patch ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30423 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 17:22:26 +00:00
juhosg	314c3a2a09	ar71xx: fix platform description ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30419 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 15:27:49 +00:00
juhosg	548962afd2	generic: fix yaffs2 build warnings on 3.3 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30418 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 15:21:43 +00:00
juhosg	ee8624ffde	ar71xx: ag71xx: add BQL support ... It will be usable only from linux-3.3. Based on a patch by Dave Taht <dave.taht@bufferbloat.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30417 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 14:56:47 +00:00
juhosg	2ffafb14db	ar71xx: add dummy DQL helper functions for 3.2 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30416 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 14:56:44 +00:00
juhosg	33ec8951f8	ar71xx: add preliminary support for 3.3 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30410 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 11:53:56 +00:00
nbd	d2514fe7ac	ar71xx: disable DDR flush for ethernet on AR934x, it is no longer necessary ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30409 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 11:46:37 +00:00
nbd	f243888497	ar71xx: fix db120 board detection ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30408 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 11:46:31 +00:00
juhosg	1d05b280c9	ar71xx: allow to build ag71xx w/o PCI support enabled ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30407 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 11:46:10 +00:00
juhosg	8940cbc303	ar71xx: merge 3.2 fixes ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30406 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 08:19:33 +00:00
juhosg	d9077e15ae	ar71xx: merge files-3.2 to files ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30405 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 08:19:31 +00:00
juhosg	a25bc14378	ar71xx: nuke 2.6.39 support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30404 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 08:19:28 +00:00
juhosg	8fbe7bf211	ar71xx: switch to 3.2.5 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30403 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 08:19:27 +00:00
juhosg	7666a203c2	ar71xx: refresh 3.2 patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30402 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 08:19:25 +00:00
juhosg	0fc12e3d4f	kernel: update linux 3.2 to 3.2.5 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30401 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-10 08:19:23 +00:00
juhosg	821bbd90e1	ar71xx: 3.2: remove stray semicolons from the PCI fixup patch ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30400 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-09 21:19:57 +00:00
nbd	3ca45835c8	ar71xx: fix ar934x usb reset handling on 3.2 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30399 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-09 20:39:41 +00:00
juhosg	d038b562d6	generic: fix kexec build error for MIPS with gcc-4.6-linaro ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30395 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-09 14:06:44 +00:00
juhosg	5e02263a06	generic: 3.3: add missing config symbols ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30393 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-09 08:07:52 +00:00
juhosg	f48c3fb212	generic: 3.3: fix yaffs2 build error ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30392 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-09 08:07:50 +00:00
juhosg	808eca9375	ar71xx: 3.2: get rid of an unused variable in ath79_spi.c ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30391 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-08 20:47:58 +00:00
juhosg	be2b898a91	ar71xx: 3.2: fix AHB clock name in rb4xx_spi ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30390 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-08 20:47:56 +00:00
juhosg	40424a97d2	generic: fix yaffs2 build error on 3.2 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30389 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-08 20:47:54 +00:00
florian	502d6255c8	[realview] add more missing config symbols ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30386 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-08 17:35:40 +00:00
juhosg	d87e44f83c	ar71xx: add profile and build image for the TEW-673GRU board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30377 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-08 16:26:27 +00:00
juhosg	b99e4f9ccd	ar71xx: add support for the TRENDNet TEW-673GRU board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30376 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-08 16:26:25 +00:00
jow	cfa5873fee	[avr32] select GENERIC_ATOMIC64 implementation to fix xfs related build errors ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30371 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-08 10:34:21 +00:00
kaloz	69a0392bd9	[omap4]: add audio and display features ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30370 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-08 10:21:48 +00:00
jow	4cca99b95f	8139cp: backport patches to make driver stable again ... List of patches that Jo-Philipp groveled out of git. Redux: defuzzed. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30366 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-07 21:56:51 +00:00
acinonyx	c7ddcfd108	[x86] alix2, geos: Adjust CFLAGS ... Clone of CFLAGS change from r30013 into Geos and Alix platforms. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30353 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-07 13:00:47 +00:00
nbd	6c242e52a8	kernel: add a recent upstream commit (post-3.3) to the ssb update patch, required for the next mac80211 update ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30345 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-07 11:28:06 +00:00
acinonyx	c34ae937e0	[x86] generic: Enable HPET, HID and AT keyboard support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30309 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-05 17:56:04 +00:00
acinonyx	a917102339	[x86] generic: Add missing and remove unused config symbols ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30133 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-04 20:45:17 +00:00
jogo	9a987b468a	brcm63xx: add support for linux 3.3 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30027 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-04 10:17:27 +00:00
jogo	0054748514	kernel: fix netfilter layer7 compilation in 3.3 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30026 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-04 10:17:14 +00:00
jogo	f4e4e8cad9	x86: make alix platform patch apply to 3.3 ... Based on a patch from Philip Prindeville. While at it, also refresh the patches. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30025 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-03 20:17:00 +00:00
jow	67afb34982	[x86] disable additional PATA drivers in global 3.2 and 3.3 config, remove redundant symbols from alix2 config ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30024 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-03 19:47:55 +00:00
jow	eba1d3106d	[PATCHv2 1/1] x86: trivial -- add missing CONFIG_GEOS symbol to top-level ... So that builds don't stall in x86 prompting for this symbol. [From Philip Prindeville, via http://patchwork.openwrt.org/patch/1828/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30023 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-03 19:21:41 +00:00
jow	7b270e443a	[PATCH 1/1] geos: backport driver from linux-next to 3.2 and 3.3 ... The Geos driver is in linux-next and will be out in 3.4. It builds fine against 3.2.2 and 3.3-rc2. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30022 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-03 18:16:27 +00:00
jow	a2d95d4896	[PATCHv2 1/1] net5501: backport drivers from linux-next ... Backport net5501 platform driver from 3.4. Remove vestiges of old (pre-2.6.30) leds-net5501.c driver. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30021 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-03 18:14:02 +00:00
jow	cea253527a	[PATCH 1/1] x86: move additional oddball PATA drivers ... These should only be enabled in the generic image, as they bloat all of the other targets. Also add symbols for NET5501, ALIX, and GEOS which were added backported to 3.2 and 3.3. Restore PC speaker to Geos target. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30019 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-03 18:02:57 +00:00
jow	7e197aeecc	[x86] net5501: adjust CFLAGS and package selection (#10893) ... This patches the CFLAGS for Geode LX CPUs for 4.3 and new GGC versions. This creates more compatible code and allowed me to boot my system first time with no troubles. Also, the missing kmod is added in. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30013 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-03 14:19:29 +00:00
nbd	a5e6e41fc3	ar71xx: add usb on the pb92 board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30007 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-03 09:44:51 +00:00
jogo	752da5903f	x86: add 3.3 generic symbols ... Copy x86/config-3.2 to x86/config-3.3 and add additional symbols (for 3.3-rc2). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30002 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-02 21:01:59 +00:00
jow	f7a67f2173	[PATCH 1/1] alix2: backport platform driver updates from linux-next ... Add patches to x86/patches-3.2 and x86/patches-3.3 (update will appear in 3.4). [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1817/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30001 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-02 19:26:32 +00:00
jow	99a3240251	[x86] alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30000 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-02 19:11:52 +00:00
jow	f637f45e67	[x86] alix2, goes, net5501: clean up default packages ... Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29999 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-02 19:06:22 +00:00
jow	9d45ed8b35	[x86] alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29998 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-02 19:00:40 +00:00
jow	0499d64f3d	[x86] geos: add missing files from previous commit ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29997 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-02 18:59:51 +00:00
jow	76dfd53de0	[PATCH 2/2] geos: backport Geos driver from linux-next ... Backport of linux-next driver. Driver adds support for LEDS and S/W button. Add hotplug script for button actions. Add Openwrt system config for LEDS triggers. Add updated kernel .config for 3.2 symbols. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1816/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29996 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-02 18:58:20 +00:00
jow	77840b96be	[PATCH 1/2] geos: cleanup GPIO driver name ... In 3.1, the old drivers/char/ entry for the CS5535 GPIO driver went obsolete. Make Geos use a recent kernel and remove this ambiguity. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1815/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29995 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-02 18:44:35 +00:00
jow	77a6336d85	[PATCH] net5501: correct net5501 h/w configuration ... Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-02 18:41:10 +00:00
jogo	75d051e29d	kernel: add preliminary support for linux 3.3 ... Based on 3.3-rc2 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29986 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-02 08:23:54 +00:00
jow	2efef569b8	[PATCH] alix2: correct h/w configuration ... Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Drop obsolete CS5535 GPIO driver. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1804/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29981 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-02-01 15:31:23 +00:00
juhosg	efe78d1eeb	ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29978 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-31 20:49:34 +00:00
juhosg	61fe64fa9d	ar71xx: merge DIR-600 A1 and DIR-615 E4 support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29976 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-31 18:37:29 +00:00
juhosg	8be0cce7cc	ar71xx: fix ethernet LEDs on the DIR-600-A1 board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29975 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-31 18:37:24 +00:00
juhosg	01af86f6ed	ar71xx: unify LED names on D-Link boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29974 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-31 18:37:15 +00:00
juhosg	65ca4389f1	ar71xx: support for D-LINK DIR-615 rev. E4 ... This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-31 18:37:09 +00:00
juhosg	4bc970ba4f	ar71xx: add support for TP-Link TL-MR11U ... Adds support for TL-MR11U, a portable router with very similar hardware to the TL-WR703N and TL-MR3020, but with an onboard 2000mAh battery. Tested, working: All interfaces (Ethernet, 802.11n, USB) WPS & Reset switches (Power appears to be a hardware slider) Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled) Sysupgrade [juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch breakage] Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29972 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-31 18:37:01 +00:00
juhosg	796a085cac	ar71xx: compress kernel binaries in Image/Prepare stage ... The lzma compressed kernel is used by one of the loaders. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29971 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-31 18:36:54 +00:00
juhosg	41e9c172ba	ar71xx: use dynamically allocated partitions in wrt160nl_part ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29970 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-31 18:36:51 +00:00
juhosg	b623047424	ramips: change vlan_config for the ALFA W502U board ... This change moves the WAN port into a separate VLAN. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29969 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-31 18:34:10 +00:00
jogo	06d197404b	kernel: update linux 3.2 to 3.2.2 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29967 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-31 09:44:00 +00:00
jogo	e21718ae44	kernel: update linux 3.1 to 3.1.10 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29966 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-31 09:43:57 +00:00
jogo	4521add75d	kernel: update linux 3.0 to 3.0.18 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29965 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-31 09:43:53 +00:00
florian	25bc7cfae8	[brcm63xx] build 96348R images ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29960 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-30 21:12:32 +00:00
florian	6baeb520da	[brcm63xx] remove support for 2.6.39 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29959 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-30 21:12:28 +00:00
florian	283043998c	[brcm63xx] bump to 3.0.17 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29958 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-30 21:12:25 +00:00
florian	4a2187358a	[au1000] add missing config symbols ... Thanks KanjiMonster git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29955 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-30 10:53:20 +00:00
florian	55ef51a400	[kernel] fix gpiommc build failure with 3.2 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29954 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-30 10:53:16 +00:00
jow	4181b7c622	[x86] create a config-3.2 for upcoming changes, rebase config-default to 2.6.39 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29953 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-30 02:13:37 +00:00
florian	581e492dd6	[ep93xx] add default and Sim.One profiles ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29942 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-29 15:00:36 +00:00
florian	658e7e8470	[ep93xx] add 3.2 support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29941 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-29 15:00:33 +00:00
florian	9c597f0c30	[kernel] add another 3.2 framebuffer symbol ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29940 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-29 15:00:29 +00:00
florian	7b321c6ac4	[au1000] add support for 3.2 kernel ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29939 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-29 15:00:25 +00:00
florian	ebbec463c7	[ar71xx] add support for the Atheros AP113 reference board ... This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29935 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-28 13:19:49 +00:00
florian	ccc47d58db	[ar71xx] refresh 3.2 patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29934 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-28 13:19:43 +00:00
jow	6e5d8656ed	[sdk] make sure .config gets copied as file ... When using scripts/env, .config is most likely a symbolic link pointing to env/.config. Previously the symbolic link got copied as-is into the SDK tarball, leading to a dangling .config symlink on the target system which prevented the SDK from working. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29927 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-28 03:30:30 +00:00
hauke	8ba3ef273d	brcm47xx: add fix for cardbus host controller ... These devices have two devices on the bus, the host controller itself and the device. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29923 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-27 20:10:51 +00:00
juhosg	8fcb797999	ar71xx: use 64k block size for WZR-HP-AG300H ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29917 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-27 10:42:41 +00:00
juhosg	406018ae4d	ar71xx: fix sysupgrade image building of atheros boards after r29899 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29916 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-27 07:51:09 +00:00
juhosg	72a8cff4c1	ar71xx: create the temporary directory before building initramfs images ... Thanks to Florian for reporting. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29915 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-26 21:28:34 +00:00
juhosg	b8f0111122	ar71xx: create a profile and build images for Compex WPE72 ... [juhosg: remove ath9k from the the profile package list, build WPE72 image with the Default profile as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29914 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-26 17:01:44 +00:00
juhosg	af63c6a4f8	ar71xx: add support for Compex WPE72/WPE72NX ... This patch adds support for Compex WPE72 bare board and Compex WPE72NX Indoor Access Point. [juhosg: add support to 3.2 as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29912 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-26 17:01:41 +00:00
juhosg	537832ae56	generic: add WPE72 ID to myloader.h ... Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29911 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-26 17:01:38 +00:00
juhosg	57ffcdaccd	ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards ... This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-26 10:44:23 +00:00
juhosg	0bca69f7bf	ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour ... This patch fixes the board detection of the TL-MR3020. The LED behaviour has also been modified: * The WPS LED is the diag LED now. * A netdev trigger for the LAN LED has been added. The profile of the TL-MR3020 has been updated because the needed package "kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev trigger for the 3G/USB LED. [juhosg: the board name changes has been removed, and the kernel files has been changed instead.] Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29905 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-25 07:44:45 +00:00
juhosg	f662489883	ar71xx: TL-MR3020: fix GPIO polarity for button and switch ... This patch fixes the GPIO polarity for the button and the sliding switch. The buttons are not active low. "Pressed" and "Released" events are wrong without the patch. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29904 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-25 07:44:43 +00:00
juhosg	3f391b2e19	ar71xx: use the lzma loader on the Planex boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29900 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 20:12:10 +00:00
juhosg	a805739180	ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29899 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 20:12:08 +00:00
juhosg	f2dce5bf3d	ar71xx: fix the AP/Router LED definitons on MZK-W300NH ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29897 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 18:40:38 +00:00
juhosg	280177d53b	ar71xx: preset WLAN LED config on MZK-W300NH ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29896 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 18:40:36 +00:00
juhosg	c8f5aae9fd	ar71xx: remove hardcoded MTD layout from planex files ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29895 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 18:40:34 +00:00
juhosg	8b3aaef2dd	ar71xx: pass mtdlayout to Planex boards via command line ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29894 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 18:40:33 +00:00
juhosg	7fe033da7a	ar71xx: remove an unused header file ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29893 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 18:40:31 +00:00
juhosg	f57ff12b98	ramips: generate sysupgrade image for the ALL0256N ... Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29884 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 11:48:48 +00:00
juhosg	64435afc83	ramips: add user-space support for ALL0256N ... This adds uci-defaults and sysupgrade support for the ALL0256N. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29883 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 11:48:47 +00:00
juhosg	ad3e5bb078	ramips: add kernel support for ALL0256N ... Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29882 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 11:48:45 +00:00
juhosg	3ea7ce5200	ar71xx: nuke fs_all variable in image/Makefile ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29880 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 09:47:25 +00:00
juhosg	6c5c90403f	ar71xx: create interim kernel files in a separate dir ... This reduces the size of the ImageBuilder tarball a lot. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29879 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 09:47:23 +00:00
juhosg	50e8ce781c	ar71xx: prebuild all loaders in Image/Prepare stage ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29878 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 09:47:22 +00:00
juhosg	619b319338	ImageBuilder: respect the PROFILE parameter ... Based on a patch from #10766 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29877 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-24 09:47:20 +00:00
juhosg	20d9fd2c16	ramips: scripts updates ... In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29871 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-23 10:23:32 +00:00
juhosg	71feb1ed02	ar71xx: 3.2: fix build errors if PCI is not enabled ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29870 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-23 08:52:21 +00:00
juhosg	be456a1234	ar71xx: fix compiler warning if PCI is not enabled ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29869 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-23 08:52:18 +00:00
juhosg	e0b80e41eb	ar71xx: add initial support for 3.2 ... Tested on the following boards: ALFA AP96 TL-MR3220 v1 TL-WR1043ND v1 TL-WR2543ND v1 TL-WR703N v1 TL-WR741ND v1 TL-WR741ND v4 WNDR3700 v1 WZR-HP-G300NH git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29868 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 22:38:19 +00:00
juhosg	22b99f32a1	ar71xx: move arch specific files to files-2.6.39 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29867 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 22:38:11 +00:00
juhosg	b66dee35c3	ar71xx: build ALFA AP96 images with default profile as well ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29866 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 22:33:15 +00:00
juhosg	99d51f00d6	generic: 3.2: allow to build myloader mtd parser for ATH79 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29860 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 18:43:39 +00:00
juhosg	7a77552c35	generic: allow to build myloader mtd parser for 3.2+ ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29858 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 18:36:49 +00:00
juhosg	608335c636	ramips fix f5d8235-v1 diag LED support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29857 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 18:11:39 +00:00
juhosg	acc9c3cbf5	ar71xx: wrt160nl_part: include module.h and fix compiler warnings ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29856 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 17:55:38 +00:00
juhosg	681c0cf274	ar71xx: tplinkpart: include module.h ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29855 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 17:55:36 +00:00
juhosg	523cf1638c	ar71xx: rename vsc7385 spi driver ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29853 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 13:51:57 +00:00
juhosg	e3c5dcc5ee	ar71xx: rename ap81 spi driver ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29852 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 13:51:56 +00:00
juhosg	047bbb085a	ar71xx: rename rb4xx spi drivers ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29851 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 13:51:54 +00:00
juhosg	d73151f6d4	ar71xx: rename the nxp_74hc153 driver ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29850 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 13:51:52 +00:00
juhosg	3746d2ed29	ar71xx: change board id of the UniFi board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 13:51:50 +00:00
juhosg	fa5eb96b17	ar71xx: include linux/module.h in the micrel phy driver ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29848 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 13:51:49 +00:00
juhosg	a40700d373	ramips: add sysled and sysupgrade to wr512-3gn ... Patch from #10035. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29847 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 13:43:23 +00:00
juhosg	e6804feade	generic: 3.2: don't disable lockdep for OOT modules ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29846 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-22 09:57:39 +00:00
juhosg	e2bae31171	generic: rtl8366: add rtl8366_smi_write_reg_noack helper ... After issuing a soft reset on the RT8366{S,RB} switch, waiting for the last acknowlegement fails in rtl8366_smi_write_reg. Add a _noack version of the function and use that for issuing a soft reset. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29844 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-21 22:44:09 +00:00
hauke	6e809dd8f1	brcm47xx: add support for pcie host controller on bcma based SoCs. ... This also adds minimal support for the BCMA43224 pcie wireless card. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29843 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-21 22:39:20 +00:00
juhosg	1047651f0e	ramips: sysupgrade for ESR-9753 ... This patch add sysupgrade for Engenius ESR-9753 Signed-off-by: Artur Wronowski <arteqw@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29824 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-20 10:49:26 +00:00
jogo	2ea3aaed73	kernel: fix OCF for linux 3.2 ... Add skb_frag_page from 3.2 to OCF for 3.1 and earlier and use it. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29818 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-19 19:51:54 +00:00
jow	d5a63cc211	[adm5120] add missing kernel symbols ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29790 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-19 01:57:22 +00:00
jow	429edf765e	Make the grub timeout configurable on x86 targets ... Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29786 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-19 01:14:45 +00:00
jow	62b26e2933	x86/config-3.2: add linux-3.2 symbols for x86 ... The following symbols are missing for x86, in sorted order. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29783 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-19 00:31:39 +00:00
florian	60e384d276	[kernel] fix thinko in 102-ehci_hcd_ignore_oc patch ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29773 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-18 07:56:02 +00:00
blogic	220fd247bc	[lantiq] gigaset 76x ... * fixes leds * adds all leds found on the sx763 board * removes board_config from flash layout because wireless data is stored in kernel (ath5k) * fix button handling Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29763 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-17 12:10:35 +00:00
blogic	03810204dc	ramips: Rework ramips_eth to not require irqsave locking anymore ... Previously the tx housekeeping was done in a spin_lock_irqsave critical section which causes irqs to be disabled during that time. Since the housekeeping is already prepared to be scheduled as a tasklet process the housekeeping only in softirq context and revise the locking between the tx path and the housekeeping tasklet by using a normal spin_lock which in most situations will be a NOP anyway. This makes sure that interrupts are only disabled for a short time since in the worst case the housekeeping might have to free up to 256 skbs. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29762 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-17 11:23:11 +00:00
hauke	079a3384c5	brcm47xx: add support for kernel 3.2 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29756 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-15 21:18:34 +00:00
hauke	da271c7332	brcm47xx: run kernel_oldconfig ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29755 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-15 14:53:32 +00:00
kaloz	6ca687282b	[target/omap4]: add support for OMAP4 based boards, starting with the PandaBoard ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29753 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-14 23:02:56 +00:00
kaloz	399f89c7fc	[generic/3.2]: fixup arm xz support with recent changes ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29750 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-14 22:55:04 +00:00
kaloz	e20c35f54d	[generic/3.2]: add missing symbols ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29749 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-14 22:53:28 +00:00
nbd	2b1f20d73e	kernel: disable bridge igmp snooping in 3.2 as well ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29747 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-14 14:57:03 +00:00
nbd	10b3a6c001	kernel: disable bridge igmp snooping by default to avoid multicast issues ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29744 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-14 13:50:25 +00:00
jogo	4773b5ef82	kernel: ppc40x: ppc44x: add missing kernel config symbol ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29742 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-14 12:04:17 +00:00
hauke	01cb3619d3	brcm47xx: update usb driver ... Add workarround for BCM5357 and BCM4749. This patch contains the following fixes from George Kashperko: * separate subroutines for controller initialization workarounds - following CodingStyle recommendations; * __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG; * fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being kmalloc'ed is never freed anywhere while platform_device_add_resources will kmemdup resources right away; * fix compilation error in ssb_hcd_resume - it will fail as soon as CONFIG_PM is selected. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29734 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-13 20:11:23 +00:00
jow	3651d1c332	[generic] rtl8366: fix rtl8366_smi_detect() after r29677 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29732 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-13 19:17:58 +00:00
jogo	504d88e2ae	brcm63xx: add support for linux 3.2 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29731 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-13 14:59:50 +00:00
jogo	04e6d374b6	kernel: add support for linux 3.2.1 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29730 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-13 14:55:07 +00:00
jogo	d828d77b46	kernel: backport overlayfs v11 to 3.0 and 2.6.39 ... Should fix whiteout issues and missing files when using extroot. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29727 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-13 14:42:53 +00:00
jogo	f1f885a356	kernel: update linux 3.1 to 3.1.9 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29726 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-13 14:38:28 +00:00
jogo	6b4b162100	kernel: update linux 3.0 to 3.0.17 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29725 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-13 14:10:44 +00:00
nbd	63c3f72940	ar8216: use vlan configuration for connecting ports (forced to be untagged) even with vlan_enable=0, but keep them isolated before the switch has been configured ... this makes enable_vlan=0 practical for vlan passthrough git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29719 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-12 10:15:11 +00:00
nbd	25b268205a	ar8216: do not strip vlan tags when running with vlan_enable=0 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29718 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-12 10:15:08 +00:00
juhosg	1b3efb3352	ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29713 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-11 18:00:50 +00:00
cshore	efab389042	[brcm63xx] Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics. ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29712 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-11 13:47:48 +00:00
juhosg	74844fd50b	ar71xx: disable ath79 in order to get rid of Kconfig warnings ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29711 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-11 09:14:19 +00:00
juhosg	6734a832bc	ar71xx: pb44_spi: add shutdown handler ... This allows to access the flash from a kexec'd kernel. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29710 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-11 09:14:18 +00:00
juhosg	7bb349bc59	ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29709 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-11 09:14:17 +00:00
juhosg	ddfc10f668	ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29708 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-11 09:14:15 +00:00
juhosg	3e74da5245	ar71xx: ar71xx_spi: add shutdown handler ... This allows to access the flash from a kexec'd kernel. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29707 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-11 09:14:14 +00:00
juhosg	8e61fd2405	ar71xx: ar71xx_spi: save and restore regs from probe/remove ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29706 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-11 09:14:13 +00:00
juhosg	302dc3a936	ar71xx: ar71xx_wdt: add shutdown handler ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29705 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-11 09:14:11 +00:00
juhosg	0dad098602	ar71xx: refresh patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29683 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-07 19:36:43 +00:00
juhosg	e1a6e8b311	ar71xx: add a profile and build images for the TL-WR2543N/ND ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29682 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-07 19:36:42 +00:00
juhosg	19be413163	ar71xx: add initial support for the TL-WR2543N/ND board ... The WLAN LEDs are not working yet. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-07 19:36:35 +00:00
juhosg	3e84f7b9f1	ar71xx: allow to specify max read size for m25p80 ... Reading from the flash chip on the TL-WR2543ND seems buggy. If the SPI flash driver tries to read too much data in one SPI transfer, the flash chip returns bogus values. This can be caused by a buggy flash chip on my board, or it can be a bug in our SPI driver. Add a workaround to the m25p80 driver until I find out the root cause of the problem. The patch allows to specify the maximum numner of bytes which can be read safely withint one SPI transfer. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29679 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-07 19:36:33 +00:00
juhosg	55772106df	generic: add driver for the RTL8367R/M switches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29678 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-07 19:36:31 +00:00
juhosg	d80f2ee46b	generic: rtl8366: preparing for RTL8367 support ... * make clock delay configurable * make read,write commands configurable * use u16 for member and untag fields git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29677 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-07 19:36:30 +00:00
juhosg	d43b4effd9	generic: rtl8366_smi: add timeout message ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29676 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-07 19:36:25 +00:00
juhosg	54bc3d42c4	ar71xx: local mac support on the wndr3700 ... The wndr3700 at least has no eth0 mac address and usually leverages the first wireless device's mac when in a bridged scenario. If, however, you want to route, and not bridge the interfaces, you need a unique mac address for it. This patch sets the local bit on the mac address pulled from the wireless chip and uses the resulting address for eth0. Patch-by: Dave Taht <dave.taht@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29675 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-07 17:24:44 +00:00
juhosg	c2243d1fb9	generic: improve MIPS kexec support ... It is based on patches from the linux-longsoon-community git tree: http://dev.lemote.com/cgit/linux-loongson-community.git/ Now the kernel can use the command line parameter from kexec-tools. Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped before executing the new kernel). Compile tested with lantiq (3.1.4) and brcm47xx (3.0.12). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29674 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-07 16:29:16 +00:00
juhosg	66663e2809	ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29672 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-06 15:54:59 +00:00
juhosg	01c809eff1	ar71xx: add support for Redwave RW2458N ... Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-06 07:20:59 +00:00
juhosg	4c93839943	ar71xx: fix RB-750 network configuration ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29668 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-06 07:20:54 +00:00
juhosg	c63a29ee7f	ar71xx: fix sections mismatch warnings in the nand drivers ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29667 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-05 18:08:33 +00:00
juhosg	978d04d680	ar71xx: fix LED configuration on the RB-750 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29666 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-05 18:08:28 +00:00
juhosg	6c8dc3bd72	ar71xx: create profile and build image for the ALFA AP96 board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29663 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 21:13:57 +00:00
juhosg	b8e2e95b70	ar71xx: add inital support for the ALFA Network AP96 board ... The microSD slot and the Real Time Clock is not working yet. The miniPCIe interface is not tested due to the lack of a suitable card. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 21:13:54 +00:00
juhosg	3d14a486be	ar71xx: specify console kernel parameter for the Compex boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29660 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 17:30:59 +00:00
juhosg	86c95a9481	ar71xx: allow to use the command line hack on compex devices ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29659 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 17:30:58 +00:00
juhosg	bf238aa8e9	ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 ... These models are based on the AP99 reference board, and uses the AR7241 SoC. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 17:30:57 +00:00
juhosg	c96ab77e4e	ar71xx: show correct model name on TL-WA701N/ND boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29657 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 17:30:55 +00:00
juhosg	06483eda3d	ar71xx: add profile and build image for the TL-WA701N/ND boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29656 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 17:30:54 +00:00
juhosg	342be7abf7	ar71xx: fix network configuration for the TL-WA901N/ND boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29654 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 17:30:52 +00:00
juhosg	9229d15c65	ar71xx: allow to use LAN LED on the TL-WA901N/ND boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 17:30:50 +00:00
juhosg	28c6546050	ar71xx: add default LED configuration for the TL-MR3020 ... Also use the system LED for diagnostic. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 17:30:49 +00:00
juhosg	2b1cf2b32c	ar71xx: add support for TP-Link TL-MR3020 ... This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 17:30:47 +00:00
juhosg	7e491e9a72	ar71xx: use the new om-watchdog package for OM2P ... Signed-off-by: Antonio Quartulli <ordex@autistici.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29648 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 17:30:41 +00:00
jow	8b51caf859	[netfilter] remove current RTSP support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29643 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-04 00:29:29 +00:00
jow	8f76f46fa3	[generic] backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802) ... commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29642 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-03 23:08:15 +00:00
juhosg	ced006ab54	ar71xx: add profile and build factory image for the Hornet-UB board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-01 19:30:29 +00:00
juhosg	adfe1a4686	ar71xx: build images for the ALFA Network N2/N5 boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29636 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-01 19:30:28 +00:00
juhosg	fd1bdc7c45	ar71xx: add support for the ALFA Network N2/N5 boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73	2012-01-01 19:30:25 +00:00
juhosg	a604775f66	ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-31 15:02:46 +00:00
juhosg	5a33add62c	ar71xx: enable SWCONFIG_LEDS ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29630 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-31 15:02:40 +00:00
juhosg	55894a40aa	kernel: swconfig: introduce a generic switch LED trigger ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29627 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-31 15:02:30 +00:00
juhosg	b042bd4e4d	ar71xx: ag71xx: implement get_port_{link,stats} callbacks ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29626 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-31 15:02:26 +00:00
juhosg	c400bf085d	kernel: swconfig: add get_port_{link,stats} callbacks ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29625 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-31 15:02:24 +00:00
juhosg	096af0d2e8	ar71xx: fix LEDs on the WRT400N ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-31 13:54:11 +00:00
juhosg	c1be681672	ramips: rt288x: add support for the Belkin F5D8235-4 v1 board ... Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29617 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-28 08:43:43 +00:00
juhosg	71c649d097	ramips: rt288x: change base address and window size of flash bank 0 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29616 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-28 08:43:36 +00:00
juhosg	0cbcd33f32	ramips: rt305x: add support for the ALFA Networks W502U (R36) board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29615 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-28 08:43:32 +00:00
juhosg	0d1ced0ac9	ar71xx: enable sysupgrade support for airrouter ... Works for me! ;-) Patch-by: Russell Senior <russell@personaltelco.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29614 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-27 16:59:43 +00:00
juhosg	2eb905f8ba	ar71xx: fix sysupgrade on PB42/PB44 boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29613 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-27 16:57:01 +00:00
juhosg	66769bfe50	ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-27 16:56:30 +00:00
jow	2c7dddc2ce	[generic] add missing config symbol ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29610 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-25 13:33:18 +00:00
hauke	71a38e2476	brcm47xx: fix usb on more recent bcma based devices. ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29605 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-23 17:21:52 +00:00
juhosg	b95eb02775	ramips: initial support for Sitecom WL-351 v1 002 ... This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-23 14:27:16 +00:00
juhosg	a46cfc6bcc	ramips: add support for the Senao/EnGenius ESR-9753 board ... Signed-off-by: Artur Wronowski <arteqw@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-23 14:27:10 +00:00
juhosg	f3c0d1bebb	ramips: define firmware partition for Omnima MiniEMBWiFi ... Patch-by: Ivan Ignjatic <ivan@omnima.co.uk> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29602 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-23 14:27:05 +00:00
nbd	2ca2cb6c37	ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-22 05:43:53 +00:00
jogo	c5ceea4e34	ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H ... Thanks netprince for reporting and testing. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-21 19:32:40 +00:00
jow	674429b24f	[ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-21 01:27:48 +00:00
hauke	84d175a3f2	brcm47xx: remove patch starting adding brcm4716 to ssb ... brcm4716 is supported by bcma now we do not need this patch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29576 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-19 23:55:20 +00:00
hauke	9da7868465	brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. ... This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29575 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-19 23:39:13 +00:00
hauke	a604d7454c	kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29574 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-19 23:33:03 +00:00
hauke	84ddb1a863	brcm47xx: remove support for kernel 2.6.39 ... There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29573 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-19 23:26:15 +00:00
nbd	eaf9c95caf	ar71xx: add missing wireless led changes for wzr-hp-g300nh2 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-19 09:04:15 +00:00
nbd	cdf64b5cdc	ar71xx: add support for the wzr-hp-g300nh2 ... Signed-off-by: Mark Deneen <mdeneen@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-18 22:20:17 +00:00
juhosg	c0f6abcdc6	ar71xx: use 64kraw template on more TP-Link boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-17 18:49:55 +00:00
juhosg	12930c3272	ar71xx: connect GMAC0 to the internal switch on DB120 ... Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:25:38 +00:00
juhosg	ba50354437	ar71xx: add defines for the AR934X GMAC interface ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:25:36 +00:00
juhosg	a55b188ebe	ar71xx: fix GMAC1 interface speed on the DB120 board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:25:35 +00:00
juhosg	8e8e3fdde7	ar71xx: ag71xx: fix switch port setup for AR934X ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:25:32 +00:00
juhosg	07d1bcb923	ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:25:30 +00:00
juhosg	cb5f456a33	ar71xx: ag71xx: setup switch interface mode on AR934X ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:25:29 +00:00
juhosg	f97a00297e	ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:25:28 +00:00
juhosg	e61b2d1ed9	ar71xx: allow to attach the internal switch for AR934x ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:25:22 +00:00
juhosg	812763d48e	ar71xx: introduce ar71xx_switch_data ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:25:11 +00:00
juhosg	867f0fa967	ar71xx: build images for TL-WR741N/ND v2 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:03:48 +00:00
juhosg	60c6b42122	ar71x: use raw squashfs images for TP-Link boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:03:46 +00:00
juhosg	6c3fe396cd	ar71xx: create a template for using unpadded squashfs images ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:03:45 +00:00
juhosg	f2945360c1	ar71xx: put squash image right after the kernel on TP-Link boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:03:44 +00:00
juhosg	57705b7a08	ar71xx: tplinkpart: allow to detect JFFS2 as well ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 22:03:40 +00:00
juhosg	08d268c8a7	ar71xx: ag71xx: check PHY IDs before accessing the switch registers ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 13:25:23 +00:00
juhosg	a82d9221c9	ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 13:25:21 +00:00
juhosg	ba116ade9e	ar71xx: ag71xx: nuke ar7240sw_init ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 13:25:20 +00:00
juhosg	803afe6e40	ar71xx: fix mac addresses on jjPlus devices ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-15 13:25:18 +00:00
juhosg	032d881496	ar71xx: build image for the Hornet-UB board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-14 20:54:11 +00:00
juhosg	d8f4833329	ar71xx: add support for ALFA Network's Hornet-UB board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-14 20:54:10 +00:00
juhosg	33334db9dc	ar71xx: add GPIO function bit defines for AR933X ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-14 20:54:07 +00:00
juhosg	2b913567e8	ramips: add support for Omnima MiniEMBWiFi board ... This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-14 20:51:26 +00:00
nbd	5841748e56	ar71xx: fix gpio count for ar7241/ar7242 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-14 20:47:24 +00:00
nbd	75bbe95c04	ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-14 20:21:42 +00:00
nbd	dcf5cd5fc2	ath9k: add support for registering extra leds connected to the wmac gpio lines ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29530 3c298f89-4303-0410-b956-a3cf2f4a3e73	2011-12-14 20:21:36 +00:00