qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-14 15:21:56 +02:00
Code
22,371 Commits 13 Branches 0 Tags 117 MiB
f835afb5d9
Commit Graph

8791 Commits

Author SHA1 Message Date
juhosg
a46cfc6bcc ramips: add support for the Senao/EnGenius ESR-9753 board 
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-23 14:27:10 +00:00
juhosg
f3c0d1bebb ramips: define firmware partition for Omnima MiniEMBWiFi 
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29602 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-23 14:27:05 +00:00
nbd
2ca2cb6c37 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-22 05:43:53 +00:00
jogo
c5ceea4e34 ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H 
Thanks netprince for reporting and testing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-21 19:32:40 +00:00
jow
674429b24f [ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-21 01:27:48 +00:00
hauke
84d175a3f2 brcm47xx: remove patch starting adding brcm4716 to ssb 
brcm4716 is supported by bcma now we do not need this patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29576 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 23:55:20 +00:00
hauke
9da7868465 brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. 
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29575 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 23:39:13 +00:00
hauke
a604d7454c kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29574 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 23:33:03 +00:00
hauke
84ddb1a863 brcm47xx: remove support for kernel 2.6.39 
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29573 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 23:26:15 +00:00
nbd
eaf9c95caf ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 09:04:15 +00:00
nbd
cdf64b5cdc ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-18 22:20:17 +00:00
juhosg
c0f6abcdc6 ar71xx: use 64kraw template on more TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-17 18:49:55 +00:00
juhosg
12930c3272 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:38 +00:00
juhosg
ba50354437 ar71xx: add defines for the AR934X GMAC interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:36 +00:00
juhosg
a55b188ebe ar71xx: fix GMAC1 interface speed on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:35 +00:00
juhosg
8e8e3fdde7 ar71xx: ag71xx: fix switch port setup for AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:32 +00:00
juhosg
07d1bcb923 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:30 +00:00
juhosg
cb5f456a33 ar71xx: ag71xx: setup switch interface mode on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:29 +00:00
juhosg
f97a00297e ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:28 +00:00
juhosg
e61b2d1ed9 ar71xx: allow to attach the internal switch for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:22 +00:00
juhosg
812763d48e ar71xx: introduce ar71xx_switch_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:11 +00:00
juhosg
867f0fa967 ar71xx: build images for TL-WR741N/ND v2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:48 +00:00
juhosg
60c6b42122 ar71x: use raw squashfs images for TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:46 +00:00
juhosg
6c3fe396cd ar71xx: create a template for using unpadded squashfs images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:45 +00:00
juhosg
f2945360c1 ar71xx: put squash image right after the kernel on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:44 +00:00
juhosg
57705b7a08 ar71xx: tplinkpart: allow to detect JFFS2 as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:40 +00:00
juhosg
08d268c8a7 ar71xx: ag71xx: check PHY IDs before accessing the switch registers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:23 +00:00
juhosg
a82d9221c9 ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:21 +00:00
juhosg
ba116ade9e ar71xx: ag71xx: nuke ar7240sw_init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:20 +00:00
juhosg
803afe6e40 ar71xx: fix mac addresses on jjPlus devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:18 +00:00
juhosg
032d881496 ar71xx: build image for the Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:11 +00:00
juhosg
d8f4833329 ar71xx: add support for ALFA Network's Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:10 +00:00
juhosg
33334db9dc ar71xx: add GPIO function bit defines for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:07 +00:00
juhosg
2b913567e8 ramips: add support for Omnima MiniEMBWiFi board 
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:51:26 +00:00
nbd
5841748e56 ar71xx: fix gpio count for ar7241/ar7242 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:47:24 +00:00
nbd
75bbe95c04 ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:21:42 +00:00
nbd
dcf5cd5fc2 ath9k: add support for registering extra leds connected to the wmac gpio lines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29530 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:21:36 +00:00
juhosg
8b3380fefc ar71xx: get rid of squashfs-4k images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 20:41:24 +00:00
juhosg
05535c2766 generic: disable 'small sector' erase in m25p80 driver 
This fixes the issues with the jffs2 images on various boards. Using
JFFS2 on devices with 4KiB erase sectors is not safe:
http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29521 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 20:41:22 +00:00
nbd
340372534c kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29516 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 15:14:59 +00:00
nbd
e7bf9d2f6d ar71xx: fix wireless led on wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 15:00:43 +00:00
juhosg
17595c4da2 ar71xx: enable AR9341 support at setup.c 
Patch-by: dyq <729650915@qq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 14:59:43 +00:00
juhosg
6caa8876b2 ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 14:59:40 +00:00
nbd
ec66b62afa ar71xx: add gpios and usb for wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29509 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 13:33:44 +00:00
juhosg
1e26277d1e ar71xx: use RedBoot parser on PB44 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29501 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-11 15:52:47 +00:00
blogic
6e7fe5572c [atheros] convert to gpiolib 
Signed-off-by:	karlp@tweak.net.au

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-09 07:52:10 +00:00
juhosg
aa54ff79a0 ar71xx: fix WNDR3x00 factory image generation 
Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs
for the device: field in their DNI tags, not WNDR3700.

This regressed in r29434, which redid WNDR3x00 model detection. The sixth
parameter to Image/Build/Netgear is only used as the -B argument to
mkdniimg, which is used to set the device: field. In r29434, this was
erroneously changed to be WNDR3700 for all models. The tools to flash
factory images (U-Boot's TFTP server and the factory software's upgrade
utility) may refuse to honor images with incorrect device: fields in their
DNI tags.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29473 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-07 06:55:50 +00:00
juhosg
e310d5b786 ar71xx: fix WNDR3x00 model detection 
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset
56 in the art (caldata) mtd partition.

r29434 redid WNDR3x00 model detection, attempting to distinguish between
WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it
contained a bug: it put the awk inside a $(...), with the result that all
WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch
checks the model name stored in the art partition, as is done by U-Boot
shipping on the WNDR3800. It has the likely advantage of working with
future models based on the WNDR3700 board. It also will not mis-detect
units on which people install more memory.

I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29472 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-07 06:55:39 +00:00
juhosg
9de4cb5314 ramips: fix mac addresses on the DIR-300/600 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29471 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 20:06:08 +00:00
jogo
87cb2a5585 linux: update 3.1 to 3.1.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29470 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 19:50:30 +00:00
jogo
9556c47348 linux: update 3.0 to 3.0.12 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29469 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 19:50:25 +00:00
juhosg
56124f8782 ar71xx: create firmware image for the TL-WR740N/ND v4 boards 
Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29468 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 16:26:44 +00:00
juhosg
a00ddbec78 ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29467 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 16:26:43 +00:00
juhosg
8e71900eeb ar71xx: fix TL-MR3x20 profile names in image/Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29463 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 13:53:21 +00:00
juhosg
05a6361449 ar71xx: cleanup TP-Link profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29461 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 10:29:25 +00:00
juhosg
ae0a750c4b ar71xx: add TP-Link board detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29459 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:11:01 +00:00
juhosg
99997320ea ar71xx: use correct mac on the lan interface on several TP-LINK devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:10:58 +00:00
juhosg
a97fd90341 ar71xx: allow to pass negative offset values for ar71xx_init_mac 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29457 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:10:55 +00:00
juhosg
097436bca8 ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29456 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 18:21:15 +00:00
juhosg
f6ab961f67 ar71xx: verify hardware id of firmware images on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29455 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 18:11:51 +00:00
juhosg
6f27fcc4b0 ramips: set mac addresses for the NBG-419N 
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:07 +00:00
juhosg
0a03c64116 ramips: set preinit interface mac on the hw550-3g board 
Based on a patch by Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29453 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:06 +00:00
juhosg
d7a5a32c17 ramips: use ramips_get_mac_* functions in the preinit script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29452 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:04 +00:00
juhosg
e595553be8 ramips: move ramips_get_mac_* functions to lib/ramips.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29451 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:03 +00:00
juhosg
5db41b5518 ramips: add ramips_ prefix to get_mac_{binary,nvram} functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:02 +00:00
juhosg
8b0e381068 ramips: fix network configuration setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29448 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 16:54:48 +00:00
juhosg
baf6222ae5 ar71xx: reclaim some unused space on TP-Link boards 
With the default OpenWrt configuration, this increases the size
of the rootfs_data partition by 384KB/128KB on the older/newer
TP-Link models.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:36 +00:00
juhosg
35606f14a3 ar71xx: check squashfs signature in TP-Link mtd parser 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:33 +00:00
juhosg
7b716ce3ec ar71xx: use the lzma-loader on TP-Link boards w/o lzma support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29444 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:28 +00:00
juhosg
057c5990c9 ar71xx: add lzma loader 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29443 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:25 +00:00
nbd
c1679af6b3 ar71xx: add preliminary support for wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:20:51 +00:00
nbd
f684eb2454 ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:20:44 +00:00
juhosg
44a7438217 ar71xx: rewrite WNDR3700/3800 handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 13:03:54 +00:00
jow
62f688b6ec [ar71xx] add some missing wndr3800 base-files definitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29433 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 12:56:21 +00:00
juhosg
1f7d4ca407 ar71xx: change user-space board detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29432 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 12:56:20 +00:00
juhosg
71573bb739 ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29431 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 12:47:53 +00:00
juhosg
974654e8c5 ramips: fix argus board rootfs size 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29422 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-04 15:24:57 +00:00
juhosg
11a837ce02 ar71xx: use the tp-link parser on the tp-link boards 
Also remove static partition maps.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29416 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:31 +00:00
juhosg
17c2fb2fc8 ar71xx: add mtd partition parser for the TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29415 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:27 +00:00
juhosg
37a46ae9f4 ar71xx: run the RedBoot parser only on the RedBoot based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29414 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:25 +00:00
juhosg
23c921bb91 ar71xx: run the MyLoader parser only on the WP543 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29413 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:23 +00:00
juhosg
4dbb6eef31 ar71xx: run the wrt160nl parser only on the WRT160NL board 
Also remove static mtd partition definitions.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29412 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:20 +00:00
juhosg
8c130c871f ar71xx: allow to pass part_probe types to the m25p80 driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29411 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:18 +00:00
juhosg
4a763a41d3 ar71xx: create initramfs images for the newer TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29410 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:57:23 +00:00
juhosg
3a0d11139d ar71xx: remove swconfig and wpad-mini from custom profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29408 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:33:41 +00:00
juhosg
1a3e21a48d ar71xx: add uboot-envtools to the default package list 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29407 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:33:40 +00:00
juhosg
7d80e1897f ar71xx: reclaim unused space in WNDR3700/3800 images 
Patch by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29406 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:33:38 +00:00
juhosg
f688ec4123 ar71xx: add a profile and build image for the OM2P board 
[juhosg: the name of the final image has been changed to
'openwrt-ar71xx-generic-om2p-squashfs-factory.bin']

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29397 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:49:05 +00:00
juhosg
41d8ed17e0 ar71xx: add support for Ubiquiti AirRouter 
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:49:02 +00:00
juhosg
8d3dba5fca ar71xx: configure default led behavior for the OM2P 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29394 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:59 +00:00
juhosg
216fce04c3 ramips: enable sysupgrade on the RT-N15 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29393 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:58 +00:00
juhosg
a24e101ea6 ramips: wrap long line in platform upgrade script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29392 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:57 +00:00
juhosg
7a1df0165f ramips: add profile for the Asus RT-N15 
This uses previously submitted rtl8366 kernel packages.

[juhosg: The kmod-gpio-dev package has been removed from the package list.]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29391 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:55 +00:00
juhosg
3c681484c2 ramips: setup default network configuration for RT-N15 
Based on a patch by Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29390 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:54 +00:00
juhosg
53a1653b16 ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile 
It is needed by the RT-N15 board.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29389 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:53 +00:00
juhosg
52d2b347d2 ramips: remove default network configuration, and generate that from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29387 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:51 +00:00
juhosg
a0f4e5c8de ramips: use /lib/functions/uci-defaults.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29386 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:48 +00:00
juhosg
2a4fea0542 ar71xx: use /lib/functions/uci-defaults.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29385 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:47 +00:00
juhosg
0c608fa18a ramips: simplify uci-defaults/network script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29383 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:45 +00:00
juhosg
a77cc3e6c0 ramips: setup mac and network interfaces from separate functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29382 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:43 +00:00
juhosg
bee289fa27 ramips: fix Asus RT-N15 board support 
Fix Asus RT-N15 flash partitions and make an image.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29381 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:42 +00:00
juhosg
fc0b7d945e ramips: Sparklan wcr-150gn board fixes 
* Fix partition sizes.
 * Add buttons and leds.
 * Register usb.
 * Remove unnecessary stuff from image Makefile
 * Fix rt2x00 eeprom extract.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29380 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:41 +00:00
juhosg
dbcdc67e0e ramips: fix package name of kmod-input-gpio-buttons 
Based on a patch from Omnima Limited.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29379 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:39 +00:00
juhosg
63abf5ef7d ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29378 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:38 +00:00
juhosg
1fe43c4a68 ramips: setup bc2 mac addresses from the generic network script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29377 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:37 +00:00
juhosg
f9f721e5ba ramips: combine network setup for all boards in one file 
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.

[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29376 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:35 +00:00
blogic
cb73b00a8f omap24xx: bump to 3.1.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29349 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-28 12:46:18 +00:00
blogic
e179d6ac25 lantiq: bump to 3.1.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29348 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-28 10:22:58 +00:00
nico
db98388370 targets: fix CONFIG_USB_STORAGE_* inconsistency 
* all options were switched from bool to tristate in 2.6.30
 * add/change/move them to generic, disabled by default
 * remove extinct CONFIG_USB_STORAGE_DPCM dropped in 2.6.29, merged with CONFIG_USB_STORAGE_SDDR09
 * remove extinct CONFIG_USB_STORAGE_SIERRA option in 2.6
 * cleanup ordering

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-25 20:47:44 +00:00
juhosg
e6638f1bd3 ar71xx: modify phy mask of the WP543 board 
This fixes ethernet on newer boards. Based on a patch from #9702.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29328 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:43 +00:00
juhosg
4baa5f5378 ar71xx: fix wndr3800 machine name 
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29326 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:38 +00:00
juhosg
31fef29134 ar71xx: copy atheros initramfs images to the image directory 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29325 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:35 +00:00
juhosg
1427b1d16a ar71xx: specify mtd layout in command line for the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29324 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:32 +00:00
blogic
d60e82238b lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch 
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29294 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-23 12:22:15 +00:00
blogic
bdfc7e8894 lantiq: 
* fixes ath5k eeprom handling
* fixes sx76x
* adds sx76x to userland api
* minor style cleanups

Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29292 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-22 18:50:51 +00:00
florian
9f67405758 [brcm63xx] don't package gpioctl by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29288 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-21 16:36:39 +00:00
nico
90143b9cd2 target/uml: export atomic64_* functions on 32-bit x86 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29287 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-21 14:28:33 +00:00
juhosg
74bada8592 ar71xx: set GE0 phy_mask for AR933x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29274 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-20 11:30:10 +00:00
jow
9ffbe98bd5 [brcm63xx] fix D-Link DSL-2650U image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29266 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-19 21:34:51 +00:00
jogo
fff36017cf linux: update 3.0 to 3.0.9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29264 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-19 18:39:12 +00:00
florian
caca8eaab1 [brcm63xx] build images for D-Link DSL-2650U (#9003) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29238 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-18 10:37:03 +00:00
mb
9460bebd64 omap24xx: Fix cbus nested IRQ acking 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29237 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 22:31:27 +00:00
mb
8a2f3bb99b omap24xx: Fix initialization of software IRQ mask 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29236 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 21:02:00 +00:00
mb
4130c70e12 omap24xx: Update 3.1 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29234 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 19:35:57 +00:00
mb
23c1db706e omap24xx: Some retu/tahvo IRQ fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29233 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 18:06:19 +00:00
mb
fd34842997 omap24xx: Add basic kexec fixes. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29232 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 14:57:34 +00:00
mb
53a62e28c0 omap24xx: Add workaround for omapfb locking bug. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29201 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-16 22:34:38 +00:00
mb
5fa3b37006 Revert r29193 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29195 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-16 19:03:23 +00:00
mb
bfa3523244 omap24xx: Set platform specific optimization flags 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29194 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-16 19:02:12 +00:00
mb
fa3d2d4445 n810: Add xmodmap to profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29193 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-16 19:01:19 +00:00
florian
f2c319545c [rdc] include bridge and 8021q modules by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29164 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-15 22:24:22 +00:00
blogic
5df57010b8 lantiq: add runtime generation of /etc/config/network 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29161 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-15 18:21:00 +00:00
blogic
8b1ffd8dab lantiq: fix falcon build breakage 
dev-wifi-rt2x00 fails to build on falcon due to missing pci

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29129 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 18:55:58 +00:00
juhosg
2ba51b8c17 ar71xx: fix USB LED on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29126 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:15 +00:00
juhosg
8f09b983e5 ar71xx: add a function for selecting output signal on a given GPIO pin 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:14 +00:00
juhosg
95684215c0 ar71xx: fix GPIO function handling on AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29124 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:13 +00:00
juhosg
73b96446ee ar71xx: add AR71XX_ prefix to GPIO_REG_* defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29123 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:11 +00:00
juhosg
d9b73ec674 ar71xx: merge nand scan patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29122 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:10 +00:00
juhosg
b9c4475b88 ar71xx: fix a compiler warning 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 13:07:47 +00:00
juhosg
e8a5cbc660 ar71xx: fix GPIO count for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29109 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 13:07:45 +00:00
juhosg
2f0405019f ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29108 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:53 +00:00
juhosg
c86a746ece ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29107 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:51 +00:00
juhosg
c6f1eddcdf ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29106 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:49 +00:00
juhosg
de73b57f12 ar71xx: add an irq parameter for ar724x_pcibios_init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29105 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:47 +00:00
juhosg
1937a07a4e ar71xx: remove hardwired interface parameters from mach-* files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29103 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 07:38:09 +00:00
juhosg
2b0cd69920 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 07:38:07 +00:00
juhosg
7f6b8dc9f4 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29101 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 07:38:05 +00:00
florian
5c52fb2bb6 [brcm63xx] build images for Pirelli A226M (#10409) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29045 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:22 +00:00
florian
3b6e0584f5 [brcm63xx] register uart0 on DWV-S0 boards (#10409) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29044 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:18 +00:00
florian
6916a71abc [kernel] refresh 3.0 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29043 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:14 +00:00
florian
dee25761b4 [kernel] refresh 2.6.39 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29042 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:10 +00:00
florian
48f5336885 [brcm63xx] rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29041 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:05 +00:00
florian
209699c72b [rdc] fix typo, load ip17xx switch module 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29039 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 18:41:26 +00:00
juhosg
f0f8408f20 ar71xx: enable has_gbit flag on AR724{0,1} 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29026 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 17:36:36 +00:00
juhosg
5e68925d9a ar71xx: fixup onboard PCIe chip registration on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29022 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 12:48:03 +00:00
juhosg
cf53375340 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29021 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 12:48:01 +00:00
juhosg
3095cc8090 ar71xx: ag71xx: add support for getting switch port link status 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29017 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:04 +00:00
juhosg
7ea3800d31 ar71xx: remove mii_ctrl resources of the ethernet devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29016 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:03 +00:00
juhosg
451654dc3a ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29015 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:01 +00:00
juhosg
749767a552 ar71xx: ag71xx: remove unused mii_cfg related functions and defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29014 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:00 +00:00
juhosg
228681e328 ar71xx: set MII interface speed from the set_speed callbacks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29013 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:59 +00:00
juhosg
7571fae3ab ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data 
Also rename the corresponding callback functions.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29012 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:57 +00:00
juhosg
95d3699b73 ar71xx: ag71xx: remove MII interface setup code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29011 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:56 +00:00
juhosg
13e0098939 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29010 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:54 +00:00
juhosg
4cc612872a ar71xx: fix occasional kernel hangs during boot on AR934x 
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29009 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:52 +00:00
juhosg
5fb5b4483b ar71xx: refresh kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29008 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:51 +00:00
jogo
85ec5ce98d linux: update 3.1 to 3.1.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29007 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 10:48:05 +00:00
blogic
e5c40dc4c3 lantiq: add uci-defaults code for handling leds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29004 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:21 +00:00
blogic
bddadbe32b lantiq: add /lib/lantiq.sh and make hotplug handlers use it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29003 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:16 +00:00
blogic
a8be2afd85 lantiq: rename leds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29002 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:12 +00:00
blogic
14ec28a2a3 lantiq: split compat headers out of bsp header patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29001 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:07 +00:00
blogic
98bf7b355b lantiq: adds hotplug handler for loading rt2x00 firmware 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29000 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:01 +00:00
blogic
1efd56db6c lantiq: adds hotplug handler for handling buttons and makes w303v work with it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28999 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:39:56 +00:00
blogic
4919aff42f lantiq: cleanup default package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28998 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:39:51 +00:00
blogic
2c1120a3b3 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28994 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 18:41:15 +00:00
juhosg
9394e4a065 kernel: ar8216: add support for the AR8236 switch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28993 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 14:09:52 +00:00
juhosg
63898b07cc kernel: ar8216: move port vlan setup into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28992 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 14:09:50 +00:00
juhosg
0999f2be56 ar71xx: use the button for WPS control on the DB120 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28990 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:20 +00:00
juhosg
69a4e7ba6a ar71xx: register the second ethernet interface on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28989 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:19 +00:00
juhosg
f42393b3c6 ar71xx: implement SoC specific phy interface setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28988 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:18 +00:00
juhosg
428566d3de ar71xx: move phy interface setup into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28987 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:16 +00:00
juhosg
9c2632e5aa ar71xx: register both MDIO bus on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28986 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:59 +00:00
juhosg
8255c166fd ar71xx: add AR934X specific MDIO registration code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28985 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:56 +00:00
juhosg
79bc01d085 ar71xx: add a secondary mdio bus 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28984 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:54 +00:00
juhosg
4e5c6e94da ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28983 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:50 +00:00
juhosg
f20b056795 ar71xx: add an id argument to ar71xx_add_device_mdio 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28982 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:48 +00:00
juhosg
7d1b33ecbd ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28981 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:42 +00:00
juhosg
1553f9eabd ar71xx: add AR934x specific USB setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28980 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:20 +00:00
juhosg
5f0b41bae5 ar71xx: register the first ethernet interface on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28979 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:18 +00:00
juhosg
8a3f26299d ar71xx: allow to register ethernet interfaces for AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28978 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:17 +00:00
juhosg
3cd36281d9 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28977 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:16 +00:00
juhosg
a1f5559837 ar71xx: add AR934X specific bootstrap and reset register bits 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28976 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:15 +00:00
juhosg
a3d2129487 ar71xx: add diag support for the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:10 +00:00
juhosg
bb977eb73b ar71xx: fix GPIO direction setup for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28974 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:09 +00:00
juhosg
1d1240855a ar71xx: fix AR934X clock frequency calculation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28973 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:08 +00:00
juhosg
b780360c45 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig 
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28971 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:04 +00:00
blogic
409ee4a226 lantiq: improve falcon package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28962 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-11 21:59:11 +00:00
blogic
79a88f017c lantiq: fix breakage introduced in 3.1 bump 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28961 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-11 21:59:01 +00:00
jow
329ee765ee base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28933 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-10 12:16:41 +00:00
jogo
4ef5b94744 target: linux: mtd: fix MTDREFRESH to an arbitrary high number 
To make the ioctl number "stable", use an arbitrary high number to prevent
conflicts with new mtd ioctls that would push MTDREFRESH's number.

Also make mtd use the in-kernel mtd headers.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28893 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-09 21:16:36 +00:00
nbd
33f4cde7a9 ar71xx: remove dead code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:33:20 +00:00
nbd
4677737b0a ar71xx: on ar7240, exclude ports from their own port vlan destination mask 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:33:15 +00:00
nbd
d212a08b1c kernel: add a top level menuconfig option for enabling lockdep 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:32:57 +00:00
juhosg
e3ad4fdef0 ar71xx: create TL-WA901ND network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28833 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:24 +00:00
juhosg
53b106bac4 ar71xx: create ALL0258N network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28832 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:23 +00:00
juhosg
6827eb6991 ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28831 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:20 +00:00
juhosg
cec23da75a ar71xx: create WZR-HP-G300NH network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28830 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:17 +00:00
juhosg
78fd771952 ar71xx: create RB-493G network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28829 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:12 +00:00
juhosg
27b52397f9 ar71xx: create TL-WR1043ND network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28828 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:11 +00:00
juhosg
97783936b3 ar71xx: create WRT160NL network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28827 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:09 +00:00
juhosg
9a2f4e2196 ar71xx: create PB92 network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28826 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:08 +00:00
juhosg
55fb18f8e1 ar71xx: create DIR-825-B1 network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28825 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:07 +00:00
juhosg
c46cd218f0 ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28824 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:03 +00:00
juhosg
b9aab9ba7e ar71xx: create RB-450 network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28823 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:02 +00:00
juhosg
e1af0acf19 ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28822 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:01 +00:00
juhosg
989312537f ar71xx: create RB-433{,U} network config from uci defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28821 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:58 +00:00
juhosg
0c1f9db114 ar71xx: create even more network configs from the uci-defaults script 
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28820 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:56 +00:00
juhosg
08c0787d79 ar71xx: create more network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28819 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:54 +00:00
juhosg
15334c9058 ar71xx: create a bunch of network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
a single ethernet interface.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28818 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:52 +00:00
juhosg
7a36f263be ar71xx: create generic network config from an uci-defaults script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28817 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:51 +00:00
juhosg
650912aa45 ar71xx: remove AP81 defconfig, it is the same as the generic config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28816 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:34:33 +00:00
juhosg
ebf7a3e2f9 ar71xx: change generated Buffalo firmware versions 
With version 1.76 the upgrade may fail with newer Buffalo firmwares with
a message like this:
"You can not update the firmware because the firmware version is earlier
than 1.82. Please use 1.82 or later version for firmware update."

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28815 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:34:32 +00:00
kaloz
1e643c087d [cns3xxx]: update 3.1 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28814 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:13:13 +00:00
kaloz
5e628c6e90 [generic/3.1]: update arm mach-types 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28813 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:12:26 +00:00
juhosg
03dd4c25f7 ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28812 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 20:25:00 +00:00
juhosg
8c1109a28d ar71xx: wrap long lines in the upgrade script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28811 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 20:24:59 +00:00
juhosg
1823bd18f8 ar71xx: fix WHR-HP-G300N firmware partition offset 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28810 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 20:24:57 +00:00
juhosg
ab5f1e4aa3 ar71xx: add default network configuration for the WHR-HP-GN 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28807 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 13:32:43 +00:00
juhosg
8853be8e17 ar71xx: build image for the Buffalo WHR-HP-GN 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28806 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:11 +00:00
juhosg
266baaf0dd ar71xx: add support for the Buffalo WHR-HP-GN board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28805 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:10 +00:00
juhosg
24f3dbc411 ar71xx: build image for the Buffalo WHR-G301N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28804 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:08 +00:00
juhosg
17990be972 ar71xx: add support for the Buffalo WHR-G301N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:07 +00:00
juhosg
e1c0ad196a ar71xx: fix WHR-HP-G300N image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28802 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:05 +00:00
juhosg
358394e594 ar71xx: enable WHR-HP-G300N support in kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28801 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:04 +00:00
juhosg
29f0664566 ar71xx: fix WHR-HP-G300N MTD partitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28800 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:03 +00:00
mb
3ac117e4b5 omap24xx: Add cbus tahvo locking fix. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28767 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-05 16:10:18 +00:00
mb
9ac8cd7802 omap24xx: Fix n810bm compilation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28766 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-05 16:01:53 +00:00
juhosg
47cebba347 kernel: swconfig: add a missing unlock in error path 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28753 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-04 14:38:31 +00:00
jow
366b2f2c12 add timeserver config to target specific system configs as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28750 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-04 12:53:35 +00:00
nbd
e5fc3fcde5 kernel: merge regression fixes for the netfilter patches to the 3.1 kernel patches (patch by tripolar) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28734 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-03 20:02:31 +00:00
blogic
fd137ce031 lantiq: remove obseleted folder. we use 3.1 now 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28728 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-03 16:33:27 +00:00
blogic
dfffaea839 lantiq: bump to 3.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28721 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-03 15:15:52 +00:00
juhosg
38ba6904bb ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 14:38:12 +00:00
juhosg
fc6e7aeeb6 ar71xx: build image for the TL-WR741ND v4 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28708 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:55 +00:00
juhosg
77da44561c ar71xx: add initial support for the TL-WR741ND v4 board 
The ethernet port LEDs are not working yet.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:52 +00:00
juhosg
2fb031808c ar71xx: add AR933X GMAC register defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:50 +00:00
juhosg
0f535ad261 ar71xx: combine LEDs setup in one file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:49 +00:00
juhosg
0fe49305de ar71xx: unify LED names on Planex boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28703 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:47 +00:00
juhosg
54e69d54d6 ar71xx: unify LED names on Buffalo boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28702 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:46 +00:00
juhosg
46393cef66 ar71xx: unify LED names on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28701 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:44 +00:00
juhosg
11cfb889eb ar71xx/all0258n: sysupgrade support 
U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be
stored in the U-Boot environment.
If the checksums don't match during boot, a failsafe-system is booted instead.
This patch adds a board-specific sysupgrade hack for the all0258n which
calculates and updates the checksums for the U-Boot environment.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28700 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 09:23:32 +00:00
juhosg
52378540af ar71xx/all0258n: add default config 
This adds default network and uboot-env settings for the ALL0258N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28699 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 09:23:31 +00:00
juhosg
be7781d3ef ar71xx: remove default network config of the mzk-w04nu board as well 
It works with the generic config.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28695 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 09:23:25 +00:00
juhosg
1e4e4a0fab ar71xx: remove LED setup of nonexistent interfaces on RB750 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28693 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-31 14:26:56 +00:00
juhosg
c586df7775 ar71xx: remove default network config of the wnr2000 board 
It is the same as the generic configuration.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28692 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-31 14:26:51 +00:00
acinonyx
893d0c6df4 [ramips] rt305x: Create factory image for Fonera 2.0n 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28689 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-31 09:23:44 +00:00
mb
b67bdb0144 omap24xx: Default to linux-3.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28687 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-30 22:42:00 +00:00
mb
e77f6c670d omap24xx: Fix n810 LCD initialization 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28685 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-30 20:31:45 +00:00
mb
bcb479b352 omap24xx: Fix n810 boot 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28683 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-30 18:46:45 +00:00
juhosg
5a382347ed ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value 
Aparently $magic_long was meant here instead of $magic when comparing with
32-bit values.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28678 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-30 13:06:30 +00:00
mb
2691ee027d omap24xx: Refresh 3.1 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28677 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-29 22:52:44 +00:00
mb
9c6027e5b7 omap24xx: Refresh 3.1 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28676 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-29 22:52:07 +00:00
mb
560730403d Fix tusb patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28675 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-29 22:33:59 +00:00
mb
58deaa7240 omap24xx: Fix MUSB compile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28674 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-29 22:26:27 +00:00
mb
80b92379ed omap24xx: Add n800 touchscreen and keypad drivers. 
Thanks to Marat Radchenko.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28673 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-29 20:35:36 +00:00
mb
d63172b5b3 omap24xx: Add 3.1 patchset. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28672 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-29 19:02:50 +00:00
juhosg
e160695e43 ar71xx: fix typos in image/Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28618 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:52 +00:00
juhosg
85713e36cb ar71xx: add initial support for the OpenMesh OM2P board 
Based on a patch by Marek Lindner <marek@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28617 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:51 +00:00
juhosg
8256ef2e81 ar71xx/all0258n: fix partition layout 
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28615 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:47 +00:00
mb
4126b8d697 Update my email address 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28603 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-26 14:54:26 +00:00
nbd
74e424738e x86: disable crashlog, ioremap of RAM does not work properly here 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28599 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-26 11:49:25 +00:00
juhosg
b4979fee64 ar71xx: create image for the WNDR3800 
This adds support for the Netgear WNDR3800, it is almost the same as
the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28597 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-26 06:12:47 +00:00
jow
543e578b89 target: remove CONFIG_IDE_PROC_FS support as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28586 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-25 16:40:06 +00:00
jow
b2448f1cac brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28585 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-25 16:19:52 +00:00
jow
3275a393fc target: globally disable BSD process accounting 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28584 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-25 16:18:36 +00:00
juhosg
ab4232bf2d ramips: Support for NexAira BC2 
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28571 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:36 +00:00
juhosg
b1f6b4ed8f ramips: fix switch-port assignment for HW550-3G 
WAN is on swtich port 0 for Aztech HW550-3G.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28570 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:32 +00:00
juhosg
0f217d1398 ramips: combine led setup for all boards in one file 
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28569 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:31 +00:00
juhosg
165b64f3f8 ar71xx: build image for the Buffalo WHR-HP-G300N 
Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:29 +00:00
juhosg
c01dd82e04 ar71xx: Buffalo WHR-HP-G300N kernel support 
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:26 +00:00
juhosg
0475f34e05 ar71xx: build image for the Allnet ALL0258N board 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28565 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:23 +00:00
juhosg
61504e67d9 ar71xx: add kernel support for the Allnet ALL0258N board 
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28564 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:21 +00:00
juhosg
afc3633a2e ar71xx: don't override CONFIG_FSNOTIFY 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28563 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:18 +00:00
jow
fbebd1e720 [ar71xx] base-files: make sure inittab-console-fixup returns with success (#10275) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:35:43 +00:00
nico
2c88ef6e95 [target] x86: allow VDI & VMDK images for all subtargets (closes: #10255) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28518 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-22 13:09:15 +00:00
jogo
ad05c99253 linux: generic: refresh patches for 3.1-rc10 
Hopefully the last one and identical to final.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28492 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-20 10:32:44 +00:00
jogo
0f7b0ae7de linux: ar71xx: add support for Mikrotik Routerboard RB493G 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28423 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-11 23:05:16 +00:00
jogo
0f944343dd ar71xx: add a workaround for ar8316 not always driving the TA bit to low 
AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit
to low despite returning a valid value. Ignore it and just use the
returned value anyway.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28422 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-11 23:05:13 +00:00
jogo
c57886b49b ar8216: use mdiobus_{read,write} to ensure proper locking 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28421 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-11 23:05:10 +00:00
blogic
eac20bee29 [lantiq] 
* update patches to 3.0
* add basic vr9 support
* backport 3.1 fixes
* backport 3.2 queue (falcon)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28405 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-10 15:13:46 +00:00
jogo
d066413d5d ag71xx: close a race between the phy state machine and link state 
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.

Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28380 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-08 11:37:14 +00:00
jow
aef22c2190 [generic] add IDs for Huawai K3770, K3771, K4510 and K4511 to option driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28376 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-06 18:23:16 +00:00
florian
ca29e2ab07 [malta] add missing kernel config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28363 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-04 09:15:37 +00:00
cshore
fdb6efb1bc Was specifying input-polled-keys and not input-keys-polled as the module name. 
Philip Prindeville - 2011-10-03 03:58:17

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28357 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-03 04:39:54 +00:00
cshore
5024c10301 Add patch for linux-3.0 as well. 
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28356 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-03 03:09:20 +00:00
cshore
18804bfb8b New x86 platform specific symbol needed for 3.1-rc3. 
---
Attaching the correct file this time...

Philip Prindeville - 2011-09-07 07:01:42



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28355 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-03 03:06:29 +00:00
cshore
89735a0b98 A lot of these options get set automatically when Geode is selected. 
Don't make the config more complicated than it needs to be.
Philip Prindeville - 2011-08-29 03:15:27

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28353 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-03 03:02:42 +00:00
florian
b2e1bfb056 [brcm47xx]: add vlan definitions for Siemens SE505v2 
Hi,

this patch adds the correct vlan definitions for the Siemens SE505v2. It
applies to trunk as well as backfire (please apply here too). On
backfire this also patches brcm-2,4, because brcm47xx base-files is just
symlinked to brcm-2.4.

It also fixes two whitespace issues.

Tested with brcm47xx on both trunk and backfire branch and works as
expected.

Signed-off-by: Manuel Munz <freifunk@somakoma.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28336 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-30 12:55:33 +00:00
blogic
50ecf457b7 [lantiq-wdt] 
The enable function was using the global timeout variable for local operations.
This resulted in the value of the global variable being corrupted, thus
breaking the code.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28310 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-26 10:35:51 +00:00
blogic
0928dfa0bb [lantiq] 
* remove obseleted m25p80 patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28309 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-26 09:36:02 +00:00