7925295fd6
delete ,inc.
2009-04-27 17:05:52 +00:00
d13f0af3b0
update Makefile
2009-04-27 17:03:46 +00:00
4e23a51d53
now inflash can upload stage2
2009-04-27 16:08:41 +00:00
1675108f82
init the cpu_id
2009-04-27 09:37:05 +00:00
60cb0eb193
add read configure file code
2009-04-27 08:54:10 +00:00
4f47892d13
add usb_boot.cfg file
2009-04-27 08:15:27 +00:00
738212eb35
change the stage1 start address
2009-04-27 06:42:15 +00:00
3bcfd5725b
upload use usb_bulk_wirte.
2009-04-26 20:08:14 +00:00
ca44786d0f
add usb request value
2009-04-26 18:17:38 +00:00
c84cd36cf8
[inflash] send the data length before uploading the file
2009-04-26 18:11:19 +00:00
6850c99ab8
now we don't have USBBoot.cfg file.
...
for now. we put the configure in code.
2009-04-26 18:09:08 +00:00
22cb7cda9e
correct the flash tool path
2009-04-26 15:34:02 +00:00
8979988877
[flash-tool] complete inflash stage1
...
The stage1 file can be uploaded but the following bootstrap is not successful. Once this bug is found adding stage2 is no problem.
2009-04-26 10:37:31 +00:00
08a770af52
test email
2009-04-24 03:18:27 +00:00
1bd0ec6eb3
don't need this we use flash-tool instead.
2009-04-23 05:51:18 +00:00
a11533e6ca
add linux usb flash tool
2009-04-22 18:22:16 +00:00
f41288f47c
add RXD pin
2009-04-22 14:42:48 +00:00
3400d208d5
mv kernel code to github.com
2009-04-22 14:39:48 +00:00
e418b865c4
try to write the ingenic driver
2009-04-15 17:06:05 +00:00
4303c6e1f5
add u-boot git info
2009-04-15 16:56:12 +00:00
0cebd4b4c8
we have git repos keep u-boot
2009-04-15 16:51:56 +00:00
67126171bb
we don't find the RXD on the Pi's PCB. so I make the u-boot driectly
...
boot kernel
change some config base on GGV's nand boot
2009-04-14 03:58:36 +00:00
6b41c92f61
add README
2009-04-13 15:44:54 +00:00
52814d95f5
change CPU speed and command prompt
2009-04-13 15:30:36 +00:00
edeb87d8e4
Here comes the updated patch for the Ingenic SoCs. This patch removed all the
...
*.o.cmd files that were created by the patch, which could ossibly confuse
Kbuild with intermediate module sources.
This patch is intended to replace the one you have in the Google Code
by Florian Fainelli
Email : florian@openwrt.org
http://openwrt.org
2009-04-13 13:25:25 +00:00
a3b9071e22
change the usbboot to ingenic-tools (host side code)
...
add usb-boot to keep the device code.
2009-04-11 15:04:25 +00:00
fa30f9e437
don't display the help command, just output
2009-04-07 08:03:24 +00:00
16853c48af
add usbboot stage1 stage2 to Makefile
2009-04-07 07:53:37 +00:00
6b95584211
make glibc compile & install properly
...
locale support added (modify the SUPPORTED file if needed)
2009-04-06 10:48:09 +00:00
75c9bd2885
-this patch is for the gcc-4.3
...
-now the glibc can make sucess. still cann't make install
2009-04-06 07:31:48 +00:00
343ddddc8b
add usbboot device code
2009-04-05 18:14:39 +00:00
113bbae11e
add kernel patch
2009-04-05 17:52:34 +00:00
5c31ed05b7
add nand flash tools
2009-04-05 16:26:33 +00:00
e043feab69
add build u-boot
2009-04-05 16:22:48 +00:00
bdb8bc25d6
mv pathchs to the toolchain dir
2009-04-05 13:11:59 +00:00
7f9ba8ab67
add u-boot patch
2009-04-05 13:05:47 +00:00
d7ff2fccb1
add linux-headers to compile glibc
2009-04-05 10:26:40 +00:00
a03f50dc0d
test commit log
2009-04-04 02:20:03 +00:00
fcfc0fa90d
initial commit - fails to build at glibc patches
2009-04-03 17:05:20 +00:00
xiangfu
lindnermarek