qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-14 12:59:21 +02:00
Code
24,566 Commits 13 Branches 0 Tags 117 MiB
029910ac71
Commit Graph

9671 Commits

Author SHA1 Message Date
florian
52d62d0be8 [brcm63xx] remove bcm63xx_pci_register() call in livebox board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32661 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-11 09:15:26 +00:00
florian
e070410e7a [brcm63xx] use physmap-flash on livebox (#8677) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32660 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-11 09:15:22 +00:00
florian
261b7b2d42 [mcs814x] nuport-mac: check netif_receive_skb() return value 
We did not reassign status to netif_receive_skb() return value, we thus
almost always incremented the dropped counter because the descriptor status
value never matches the NET_RX_DROP.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32659 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-11 08:29:01 +00:00
florian
0c7b89359f [mcs814x] fix typo on of_node_put() 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32653 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-09 14:44:15 +00:00
florian
eb9c638ec8 [brcm63xx] Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board) 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32643 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-06 22:10:37 +00:00
juhosg
fffc489ef4 ar71xx: swizzle address for PCI byte/word access on AR71xx 
Closes #11683.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32639 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-06 16:33:12 +00:00
juhosg
311f21e096 ar71xx: select SOC_AR933X and ATH79_DEV_WMAC for the OM2P board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32638 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-06 11:12:02 +00:00
juhosg
d675d7bc7d ar71xx: merge new board patches into the generic patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32637 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-06 11:12:01 +00:00
juhosg
0e503f85bf ar71xx: OM2P LC sysupgrade patch 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32635 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-06 11:11:58 +00:00
florian
af91801f83 [mcs814x] call of_node_put() on ethernet node 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32628 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 18:46:55 +00:00
florian
fa5a8f6863 [mcs814x] fix EPHY clock bit definition after r32489 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32627 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 18:46:52 +00:00
florian
c5bc9b0989 [mcs814x] give an unique partition identifier for dLAN USB Extender Combined partition 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 18:46:48 +00:00
juhosg
cc8ef03faa ar71xx: set firmware version for the TL-WR2543N 
This ensures that the resulting firmware can
be flashed from the latest (v3.13.17) offical
firmware.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32617 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 16:25:31 +00:00
juhosg
fd349e4b0c ar71xx: make 2.4GHz wlan LED work on the WR2543N 
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32615 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 16:25:26 +00:00
juhosg
11532f0779 ar71xx: OM2P sysupgrade support 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32613 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:57 +00:00
juhosg
0d85e0278f ar71xx: add support for the OpenMesh OM2P-LC board 
Patch-by: Marek Linder <marek@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32611 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:53 +00:00
juhosg
dd71ce4e82 ar71xx: add profile and build image for the Atheros AP136 reference board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32609 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:51 +00:00
juhosg
e03def9379 ar71xx: AP136 user-space support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32608 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:50 +00:00
juhosg
ee6173e7dc ar71xx: add initial support for the Qualcomm Atheros AP136 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32607 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:48 +00:00
juhosg
74d33b7b96 ar71xx: add initial support for the QCA955X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32606 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:47 +00:00
juhosg
97e6f60806 ar71xx: refactor PCI code to allow registering multiple PCI controllers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32605 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:45 +00:00
juhosg
671f0e3971 generic: ar8216: start aneg on each PHY of the AR8327 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32604 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-05 08:26:39 +00:00
florian
c9906b31cd [mcs814x] add missing interrupts properties to some device nodes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32603 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-04 19:37:11 +00:00
nbd
08a9c557e0 ar71xx: update the EW Dorin MTD layout, increase kernel partition size (requested by EW) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32599 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-04 10:55:56 +00:00
jogo
c94a6d0b71 bcm63xx: bcm63xx-spi does not depend on spi-bitbang 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32594 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:17 +00:00
jogo
4f860c88aa bcm63xx: 96348A-122 improvements (Comtrend 5365) 
1) Improve WLAN button.
2) Add 96348A-122 image.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:15 +00:00
jogo
c60cd5dd54 bcm63xx: fix second caldata address calculation 
thanks Noltari for spotting this.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32592 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:12 +00:00
jogo
cc1b8fb1cb bcm63xx: update patches to latest upstream versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32591 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:07 +00:00
jogo
5a8d0fdaf3 kernel: generic: spi: allow empty (un)prepare transfer 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32590 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 21:42:03 +00:00
juhosg
641595b79a ar71xx: improve MDIO busy wait code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32586 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 15:24:02 +00:00
juhosg
db1a0d339e ar71xx: remove the built-in MTD map of the ALL0258N 
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32585 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 15:24:01 +00:00
florian
0ef855fc75 [brcm63xx] refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32581 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 09:45:46 +00:00
hauke
bdc39c62ca kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32580 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-02 23:12:58 +00:00
florian
a2ed4b34a3 [brcm63xx] fix watchdog and rng drivers section mismatch (#11767) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-29 09:07:54 +00:00
nbd
7ffed0b52c ar71xx: detect and enable MIPS DSP extensions, AR9344 supports them (fixes #11762) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32520 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-28 16:05:08 +00:00
nbd
b6422914a3 kernel: switch openwrt default to TCP cubic from westwood (patch by Dave Täht) 
Despite Westwood's theoretical advantages, in nearly
every benchmark we ran last year, TCP cubic won, whether it be
on correct RTT estimates, amount of buffering, responsiveness,
etc. on current hardware and software designs.

(both need timestamps on to work well, besides)

TCP cubic is better maintained and understood than westwood,
also.

While a scenario where westwood would win possibly exists,
there is too much buffering in the wifi stack in particular
at present, to see any improvement.

If you wish to exercise various TCPs under contention,
the current svn head of netperf (2.6) has options to switch
congestion control agorithms on the fly, as does iperf.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-27 22:32:47 +00:00
florian
a6f7f0aaf2 [brcm63xx] fix SPI clock frequency selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32512 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-27 22:14:50 +00:00
nbd
ced5f69d4d kernel: add missing config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32498 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-24 20:21:27 +00:00
acinonyx
99a635edd1 ramips: mac address detection for Fonera 2.0n 
Detect and apply MAC address of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32490 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-23 13:58:29 +00:00
florian
27abc2e19f [mcs814x] provide an early ioremap cookie of the system configuration register 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32489 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-23 11:03:50 +00:00
florian
a699bb193a [mcs814x] group SYSDBG register defines in mcs814x.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32488 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-23 11:03:45 +00:00
florian
01532c0031 [mcs814x] make hardware.h a forward inclusion of mcs814x.h 
mach/hardware.h is soon to be removed by upstream kernel

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32487 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-23 11:03:40 +00:00
florian
4c31778fc4 [mcs814x] remove platform specific initialization from ethernet driver 
Hardware filtering must always be enabled as long as there is an Ethernet
device registered, and use device tree for setting the link activity and
buffer shifting enable/disable bit.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-23 11:03:35 +00:00
florian
bc89518781 [mcs814x] regroup interrupt controller register definitions in hardware.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32485 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-23 11:03:29 +00:00
florian
0235660f48 [mcs814x] remove handle_irq callback in board-mcs8140-dt.c 
This should have been removed in r32470.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32481 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-21 12:20:47 +00:00
florian
b6eacc06d6 [mcs814x] fix USB led triggers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32474 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-20 21:58:00 +00:00
florian
2af5a044d3 [mcs814x] use generic uci defaults functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32473 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-20 21:57:56 +00:00
florian
aa77c3e868 [mcs814x] remove uselss cache invalidations 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32472 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-20 21:57:53 +00:00
florian
ee556c7f7b [mcs814x] improve ethernet driver debugging 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32471 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-20 21:57:49 +00:00
florian
3a5b7c7629 [mcs814x] do not use MULTI_IRQ_HANDLER it is bogus on our platform 
This caused stalls in the Ethernet DMA block, so until properly
written and sorted out, fallback to the assembly version instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32470 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-20 21:57:45 +00:00
mirko
85bb2ebefa [target/xburst] verified to work - remove broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32469 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-20 19:04:35 +00:00
acinonyx
9ebe427897 [x86] Fix sysupgrade for squashfs, jffs2 and ext4 images 
* use 'fsync' with 'dd' for image writing
	* save config to boot partition

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32465 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 22:36:53 +00:00
florian
7c90f3b2b4 [mcs814x] add Moschip MSC814x support 
This target currently only supports Moschip's MCS8140 SoC, but support
for other chips in the same family (MCS8142, MCS8144) will be easy to add.

Target support is entirely using Device Tree for probing peripherals.
Drivers support include:
- PCI
- USB 1 & 2
- watchdog
- random number generator
- UART
- timer
- internal Ethernet PHY
- Ethernet MAC core

Support for the following boards is included using Device Tree
- Devolo dLAN USB Extender
- Tigal RBT-832

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32462 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 14:48:56 +00:00
juhosg
5fa7ed291e ar71xx: create profile and build image for the TL-WDR4300 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32461 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 11:51:20 +00:00
juhosg
977ff3326d ar71xx: add user space support for the TL-WDR4300 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32460 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 11:51:18 +00:00
juhosg
ae6a363859 ar71xx: add support for the TL-WDR4300 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32459 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 11:51:17 +00:00
juhosg
31f53133c7 ar71xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 11:51:15 +00:00
juhosg
279cc5d283 ar71xx: make AR8327 LEDs working on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32457 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:44:17 +00:00
juhosg
7066d5e4ae generic: ar8216: allow to configure AR8327 LEDs via platform data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32456 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:44:16 +00:00
juhosg
d02eb8cdaa ar71xx: remove superfluous include of asm/mach-ath79/pci.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32455 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:13:43 +00:00
juhosg
9e32544f7a ar71xx: add a common function to configure USB power GPIOs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:13:41 +00:00
juhosg
60f2c64e65 ar71xx: correctly detect NETGEAR WNDRMAC 
This patch helps properly detect a WNDRMAC device. Before this
patch the model is detected as "NETGEAR ?????????N".

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32453 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:13:38 +00:00
juhosg
f054b259d0 ar71xx: add USB LED support by default for WNDR3700/WNDR3800/WNDRMAC 
This adds kmod-leds-wndr3700-usb package to a default build for
WNDR3700, WNDR3800 and WNDRMAC in order to support the green USB LED.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32452 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 10:13:37 +00:00
juhosg
71c704387b ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router 
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w

Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 09:52:15 +00:00
nbd
669a7a0710 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 00:22:04 +00:00
nbd
bd85fd265b ar71xx: add support for reading the MAC address from OTP ROM on AR933x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 00:21:58 +00:00
jow
4e6e9c9c59 optimize kernel config for kvm_guest 
This patch enables few extra kernel options for the kvm_guest subtarget:
- Tickless kernel to avoid timer ticks in idle guests, reduces CPU usage
- Enable paravirtualization steal time support

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32436 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-18 23:36:50 +00:00
jow
03f2b4f961 [kvm_guest] remove inittab override 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32422 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-18 11:50:37 +00:00
florian
4666e9b56d [brcm63xx] fix SPI message control handling for BCM6338/6348 
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32409 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-17 16:17:29 +00:00
nbd
50d5344375 kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets 
The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32395 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-16 21:06:33 +00:00
florian
07bc7f5147 [rdc] remove broken flags 
Thanks to Nicolas Le Falher for testing on Bifferboard.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32389 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-16 16:45:28 +00:00
jow
f1d9712dc3 [x86] use ttyS0 @ 115200 baud as default for KVM guests 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32384 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-15 12:59:49 +00:00
luka
69934f5a34 kirkwood: fix typo in uci-defaults/leds 
Signed-off-by: Martin Mueller <mm@sig21.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32343 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-13 18:41:42 +00:00
nbd
2d3cf7a902 ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32336 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-13 12:54:22 +00:00
jogo
d8ff69c0da bcm63xx: readd accidentially dropped ignore_oc in ehci driver 
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32221 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-11 22:24:58 +00:00
luka
5a35428cb3 kirkwood: ib62x0 fix reboot 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32131 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-08 23:17:46 +00:00
nbd
cc530eb3af xburst: remove an obsolete CompareKernelPatchVer call 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32115 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-07 16:32:44 +00:00
florian
816d0cbd39 [brcm63xx] fix 553-board_96348w3.patch patch wrt gpio-keys-polled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32096 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 20:58:45 +00:00
nbd
c437387d32 ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32095 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 19:37:49 +00:00
nbd
b899b1d3a5 kernel: add a few more tracing related symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32094 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 18:04:00 +00:00
nbd
eed1fe974e ar71xx: fix PHY setup on TL-MR3020 (fixes #11572) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32093 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 17:24:12 +00:00
nbd
62977660d8 ar71xx: add a helper function for setting up PHY4 swapping on ar933x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32092 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 17:24:09 +00:00
nbd
7ea20fba6a ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32090 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 17:24:01 +00:00
florian
d19ba29311 [brcm63xx] fix alarm led color for board 96348A-122 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32089 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 16:07:46 +00:00
florian
0e5685072e [brcm63xx] add 96348w3 board (#10764) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32088 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:45:04 +00:00
florian
84fcf0bb00 [brcm63xx] update livebox board support (#8677) 
Merge most fixes from #8677:

- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses

Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32087 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:44:56 +00:00
florian
adfadea95e [brcm63xx] fix leds naming for all bcm63xx boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32086 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:44:52 +00:00
nbd
32b9ee0930 kernel: make tracing support configurable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32085 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:25:57 +00:00
florian
3d0fed711e [brcm63xx] backport upstream spi-bcm63xx fixes 
* message pump conversion
* not using stopping state
* setting spi driver mode bits

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32078 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 13:31:33 +00:00
florian
28f01f0d91 [generic/3.3] backport spi message queue infrastructure 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32077 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 13:31:30 +00:00
florian
a7a19483fb [brcm63xx] increase led number in patch 301-led_count.patch 
So that board patches are only touching board-related code

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32076 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 13:31:24 +00:00
blogic
9216dfc76c [lantiq] clean up generic image building 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32065 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 17:49:42 +00:00
florian
6255930f93 [brcm63xx] fix board patches so that new boards are withing appropriate ifdef 
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32060 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 13:40:41 +00:00
florian
c7d60bd0db [kernel/3.3] refresh generic patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32059 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 13:40:38 +00:00
florian
a6691cb6b1 [brcm63xx] fix bisectability of patch 303-spi-board-info.patch 
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32058 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 13:40:35 +00:00
blogic
466d98bf88 [kernel] bump to 3.3.8 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32055 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 06:57:51 +00:00
luka
576ea25936 kirkwood: reorganize target 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32053 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 00:43:56 +00:00
luka
090fe17a5f uboot-envtools: update to 2012.04.01 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32051 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-04 21:55:49 +00:00
jogo
43bdeca579 bcm63xx: fix ethernet on 96328avng and 963281TAN 
The internal switch did not get registered.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32041 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-04 08:35:25 +00:00
blogic
35d604e713 [lantiq] adds unset Kbuild symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32026 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-02 14:03:32 +00:00
juhosg
f6bfa9b749 malta: remove 3.2 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32023 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-02 12:06:28 +00:00
juhosg
8f3ef842f5 malta: use common kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32022 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-02 12:06:26 +00:00
juhosg
e17a638412 xburst: add missing config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32021 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-02 12:06:15 +00:00
blogic
b9f376d33a [kernel] adds patch to make Tantos (psb6970) switch buildable again 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32006 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-30 17:41:28 +00:00
jogo
f91824b22d bcm63xx: build images for 6328 reference boards with various flash sizes 
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.

Known issues:
 * Button setup unknown, thus no fail-safe available.
 * All other BCM6328 and BCM63XX issues

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32004 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-30 10:27:46 +00:00
jogo
99b853b6b3 bcm63xx: readd accidentially dropped network config for SPW303V 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32003 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-30 10:27:42 +00:00
juhosg
7cab23d0dc generic: ar8216: add revision specific PHY fixups for AR8327 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32000 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:27 +00:00
juhosg
72df0a7c48 generic: ar8216: replace chip_type field with chip_{ver,rev} in ar8216_priv 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31999 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:26 +00:00
juhosg
6d10d89b29 generic: ar8216: add chip_is_ar8{216,236,316,327} helpers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31998 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:24 +00:00
juhosg
3ffc68003f ar71xx: add default LED setup for the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31997 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:23 +00:00
juhosg
ab5576542a cns21xx: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31996 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:22 +00:00
juhosg
014e1ffa51 lantiq: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31995 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:21 +00:00
juhosg
09f48c381b kirkwood: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31994 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:20 +00:00
juhosg
93945c8815 ramips: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31993 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:18 +00:00
juhosg
22ae6b82eb ar71xx: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31992 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:17 +00:00
juhosg
3a3aa7378b kirkwood: use uci-defaults to configure different boards 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31990 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:15 +00:00
juhosg
436c9f6d34 ramips: WAN LED for D-Link DIR-300-B1 
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31989 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:03 +00:00
nbd
8c1c75ba17 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 20:39:50 +00:00
nbd
0f299fab07 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31934 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 02:55:59 +00:00
nbd
dfea949949 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31925 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 21:02:41 +00:00
nbd
295c63c334 kernel: fix suppressing -s for linking modules when profiling is enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31924 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 21:02:36 +00:00
juhosg
d3fa7efc8c ar71xx: fix TL-WR1041 image size 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31923 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:21:47 +00:00
juhosg
75c71fcaa0 ramips: rt3883: add device registration code for the SPI controller 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:10:00 +00:00
juhosg
84b342399c ramips: allow to use the SPI driver on RT3662/RT3883 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31921 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:58 +00:00
juhosg
1e3e199faa ramips: rt3883: fix GPIO reservation for the SPI pins 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31920 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:56 +00:00
juhosg
0c9cb51fbb ramips: rt305x: remove superfluous controller_data assignment 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31919 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:52 +00:00
juhosg
ce2fd1dbc9 ramips: make rt2x00 firmware extraction quiet 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31918 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:50 +00:00
juhosg
39068e8b25 generic: rtl8367: rename a misnamed variable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31917 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:47 +00:00
juhosg
11d6be39a6 generic: rtl8366_smi: remove duplicated spinlock initialization 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31916 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:45 +00:00
juhosg
63d3e3114d generic: rtl8366_smi: rename debugfs Kconfig symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31915 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:43 +00:00
juhosg
5a1c605a9e generic: rtl8367: allow to use VLANs > 31 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31914 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:41 +00:00
blogic
e4b72001f6 [lantiq] move files-3.3 -> files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31912 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 16:13:02 +00:00
blogic
c9e0ccf07c [lantiq] 3.2 R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31911 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 16:12:59 +00:00
blogic
c8e24ec13e [lantiq] dgn3500 support with eeprom loading from sysfs 
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31910 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 16:02:22 +00:00
blogic
f72e7bf12d [lantiq] fixes zyxel p2601hnfx 
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31909 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 16:02:20 +00:00
blogic
2b03aafe31 [lantiq] Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values. 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31908 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 16:02:16 +00:00
nbd
95d801c59d kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31906 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:16:37 +00:00
juhosg
fe77f5d922 linux/3.2: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31905 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:37 +00:00
juhosg
1ee6958324 xburst: remove support for old kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31904 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:35 +00:00
juhosg
287550be20 xburst: switch to 3.3 and add broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31903 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:33 +00:00
juhosg
8f313bd0fd xburst: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31902 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:32 +00:00
juhosg
e2dd39f3dc ppc44x: remove 3.2 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31901 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:30 +00:00
juhosg
14aefb43c8 ppx44x: switch to 3.3 and add broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31900 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:28 +00:00
juhosg
5061f8857c ppc44x: add support for 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31899 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:27 +00:00
juhosg
000012926a cobalt: switch to 3.3 and add broken flag 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31898 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:26 +00:00
juhosg
bc9bf715d9 ep93xx: remove 3.2 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31897 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:24 +00:00
juhosg
dee80699d1 ep93xx: switch to 3.3 and add broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31896 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:23 +00:00
juhosg
a195c06c00 ep93xx: add support for 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31895 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:21 +00:00
juhosg
e468dc1413 au1000: remove 3.2 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31894 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:18 +00:00
juhosg
accbbf39c0 au1000: switch to 3.3 and add broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31893 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:17 +00:00
juhosg
5c8cc31fb8 au1000: add support for 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31892 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:15 +00:00
juhosg
e3e4a95d9b linux/3.1: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31891 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:09 +00:00
juhosg
e17d6b0709 omap24xx: remove 3.1 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31890 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:07 +00:00
juhosg
4ea55a169b omap24xx: switch to 3.3 and add broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31889 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:05 +00:00
juhosg
c7e92c13d2 cns3xxx: remove 3.1 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31888 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:03 +00:00
juhosg
a27b48f2d8 cns3xxx: switch to 3.3 and add broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31887 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 15:01:02 +00:00
nbd
4cf70ab2e1 kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31886 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 14:43:58 +00:00
jogo
878544bb07 bcm63xx: build images for DSL-274XB revision F1 
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.

Known issues:
  * wifi led inverted (on when wifi is off and vice cersa)
  * same issues as generic bcm6328 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:51 +00:00
jogo
092e90e1ef bcm63xx: add ath9k to atheros wifi profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31884 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:48 +00:00
jogo
f095146c5d bcm63xx: enable bcm6328 support and required drivers 
BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31883 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:46 +00:00
jogo
cbdf1f350a bcm63xx: add support for DSL-274XB rev F1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31882 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:43 +00:00
jogo
5a482fc8b3 bcm63xx: fix port state after network down 
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31881 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:40 +00:00
jogo
0bdb7cbf98 bcm63xx: add a fixup for ath9k devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31880 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:37 +00:00
jogo
d1683ec919 bcm63xx: add support for the HSSPI controller 
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31879 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:33 +00:00
jogo
35f8e31243 bcm63xx: add preliminary support for bcm6328 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:29 +00:00
jogo
c9204063aa bcm63xx: add flash type detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31877 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:25 +00:00
jogo
fdbaed3349 bcm63xx: pad Speedport W303 V images to 4 MiB 
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:22 +00:00
jogo
34f9a0d745 bcm63xx: add a default switch configuration for DSL-274XB 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31874 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:17 +00:00
jogo
3df0e1587c bcm63xx: setup network config through uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31873 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:14 +00:00
jogo
acbbcb35b8 bcm63xx: move the board name workaround to /lib/brcm63xx.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31872 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:11 +00:00
jogo
2c54f4168e bcm63xx: use the exact board id as board identification string 
No need to keep the bcm63xx/ at the start or the chipid info at the end.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31871 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 13:22:08 +00:00
nbd
2ab926c84b kernel: fix a warning in the connmark module 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31856 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-24 18:25:08 +00:00
juhosg
530802ba69 kernel: update linux 3.3 to 3.3.7 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:32 +00:00
juhosg
71526f8705 ar71xx: fix an insignificant typo 
Patch from #11485.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31847 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:30 +00:00
juhosg
e9ac406967 ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD 
Patch by Kamil Trzciński <ayufan@osk-net.pl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31846 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:25 +00:00
juhosg
e61440d8bd ar71xx: add support for TP-Link TL-MR3040 
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31845 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:24 +00:00
juhosg
4a1bbe457a ramips: Add byte queue limits support to net/ethernet/ramips_main.c 
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:23 +00:00
juhosg
7d9b449118 ramips: Enable sysupgrade for Sitecom WL-351 
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:22 +00:00
juhosg
8a8504629a linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver 
Should fix #11513. Tested with the x86/generic squashfs image within a VM.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31841 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:19 +00:00
nbd
fb17c4e710 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31835 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-20 21:58:03 +00:00
nbd
6c09d6b4d8 kernel: merge a net-next fq_codel backlog handling fix 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31813 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 22:12:15 +00:00
juhosg
2d3a55136a omap24xx: add support for 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31810 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 20:22:32 +00:00
juhosg
71f3abe21d cns3xxx: add support for 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31809 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 20:10:53 +00:00
juhosg
2bb56acc0c linux/2.6.39: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31808 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 20:10:51 +00:00
juhosg
2afa505fd1 cns3xxx: sync kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31807 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 20:10:48 +00:00
juhosg
197bf733d7 cns3xxx: remove 2.6.39 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31806 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 20:10:46 +00:00
juhosg
acd1d54c28 cns3xxx: switch to 3.1 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31805 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 20:10:44 +00:00
juhosg
d87b48bbe9 x86: remove support for old kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31804 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 20:10:42 +00:00
juhosg
336ab20ec5 x86: remove subtarget specific LINUX_VERSION overrides 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 20:10:38 +00:00
juhosg
e32a177913 x86/ep80579: switch to 3.3 
Also fix build errors in the ep80579-drivers package.
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31802 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 20:10:33 +00:00
hauke
5ce0dd5cbe brcm47xx: fix nvram read out on devices with serial flash 
detect nvram on Linksys E3200


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31790 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 16:04:10 +00:00
hauke
1b9dfb678c brcm47xx: bcma: fix null pointer 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31789 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 15:46:30 +00:00
hauke
aa8a1880a1 brcm47xx: ssb: recognize ARM Cortex M3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31788 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 15:45:51 +00:00
hauke
addb48537a brcm47xx: some fixes for the USB driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31787 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 15:44:25 +00:00
juhosg
de772a61cc cobalt: remove 2.6.39 specific patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31785 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 09:59:22 +00:00
juhosg
f2569ecf09 x86/olpc: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31784 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 09:57:32 +00:00
juhosg
8f9cbdeccd x86: image: select bootscript images by default for OLPC 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31783 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 09:57:29 +00:00
nbd
009c4c9327 adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31781 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 21:20:23 +00:00
hauke
a08e2a1c37 kernel: add some missing config options added by r31756 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31774 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 13:28:30 +00:00
hauke
b1e2eade99 kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31772 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 13:22:38 +00:00
hauke
c343cde492 brcm47xx: remove support for kernel 3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31771 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 13:20:10 +00:00
juhosg
dcea0bf81c x86/thincan: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31765 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 06:41:01 +00:00
juhosg
db081f453b x86/xen_domu: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31764 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 06:41:00 +00:00
juhosg
4dcd044429 x86/kvm_guest: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31763 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 06:40:58 +00:00
juhosg
5fe6f552d3 x86/generic: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31762 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-17 06:40:56 +00:00
nbd
b3c4d367ce kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht) 
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:

http://queue.acm.org/detail.cfm?id=2209336

Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.

Additionally,

fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.

These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.

Includes updates to codel for better portability and speed

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31756 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 15:23:03 +00:00
juhosg
287ab9841e x86/alix2: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31753 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:45:02 +00:00
juhosg
2b245c96a9 x86/net5501: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31752 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:59 +00:00
juhosg
3261e9d285 x86: sync 3.3 configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31751 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:55 +00:00
juhosg
2075a32be0 x86: sync 3.2 configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31750 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:52 +00:00
juhosg
005d04baef x86: sync 2.6.39 configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31749 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:49 +00:00
juhosg
7b285c80fb linux/3.3: add missing symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31748 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:46 +00:00
juhosg
003fb14844 linux: add CONFIG_POWER_SUPPLY_DEBUG symbol 
It was missing in the previous commit.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31738 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 11:12:31 +00:00
juhosg
5cc763c7b2 linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 10:58:52 +00:00
nbd
82ff0a8569 ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31736 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 10:36:39 +00:00
blogic
6a54667829 [lantiq] code style cleanup of the mach files 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31735 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 09:38:05 +00:00
blogic
993c2e232f [lantiq] adds zyxel p2601hnfx support 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 09:38:02 +00:00
blogic
5af9c39784 [lantiq] set 3.3.6 as default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31733 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 09:37:59 +00:00
blogic
1fffba2171 [lantiq] set 3.3.5 as default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31718 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 16:11:26 +00:00
juhosg
674c61407c linux/3.0: R.I.P. 
It is used by the broken omap35xx/gumstix target only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31717 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:34 +00:00
juhosg
c7b0f82f36 realview: remove 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31716 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:32 +00:00
juhosg
fd4e26402c realview: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31715 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:31 +00:00
juhosg
6b364205d7 realview: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31714 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:29 +00:00
juhosg
96bc3c2734 linux/3.3: more missing config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31713 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 15:48:23 +00:00
hauke
af5a56a89c kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31710 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 11:28:02 +00:00
juhosg
298dcd23d1 kernel: update linux 3.3 to 3.3.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 09:18:32 +00:00
hauke
3ad338f697 amazon: fix section mismatch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31707 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 15:31:42 +00:00
hauke
c8c0045b91 amazon: update amazon target to kernel 3.3 
This is just compile tested, my device is currently not working.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 15:10:40 +00:00
juhosg
501390d552 gemini: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31700 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 12:04:04 +00:00
juhosg
1d2df477ff gemini: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31699 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 12:04:02 +00:00
juhosg
6a4f0ff0d7 gemini: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31698 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 12:03:59 +00:00
hauke
0b98ffdc6a brcm47xx: generate image for Linksys WRT610N V1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31696 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 00:16:57 +00:00
hauke
05c09e7de4 kernel: ssb: add PCI IDs 0x4322 and 43222 
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.

This fixes #10887.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31695 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-13 00:08:12 +00:00
hauke
8297c7ff8b brcm47xx: fix tg3 ssb patch 
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31694 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 23:59:12 +00:00
juhosg
d2821676fa linux/2.6.38: R.I.P. 
It is used only by the broken coldfire target.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31688 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 12:05:21 +00:00
juhosg
4b6fa24c63 linux/2.6.37: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31687 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 12:05:19 +00:00
juhosg
faeed4ab57 linux: add broken flag to remaining targets which are using 2.6.37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31686 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 12:05:18 +00:00
juhosg
12701e008f iop32x: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31685 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:36 +00:00
juhosg
9a9b022066 iop32x: switch to 3.3 
It is compile tested only, so add a broken flag.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31684 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:34 +00:00
juhosg
5f514056be iop32x: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31683 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:32 +00:00
juhosg
8cc898c122 sibyte: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31682 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:30 +00:00
juhosg
c53f588e2b sibyte: switch to 3.3 
It is compile tested only, so add a broken flag.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31681 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:28 +00:00
juhosg
8e84deb1d4 sibyte: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31680 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:26 +00:00
juhosg
976d0df463 ixp4xx: fix ixp4xx_crypto build error 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31679 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-12 10:49:23 +00:00
juhosg
88a3d8e65f orion: remove the broken broken flag 
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9

Additionally, the flag was added to a wrong place
so it had no effect.

Thanks to StrikerNL for testing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31674 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-10 20:20:43 +00:00
juhosg
f32805af2d kirkwood: fix Kconfig symbol for NSA-310 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31673 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 16:16:52 +00:00
blogic
510366a907 [lantiq] Add 3.3 config files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31672 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 12:52:24 +00:00
blogic
d0ba13b35e [lantiq] Add missing 3.3 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31671 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 12:52:21 +00:00
blogic
dcc5e22d87 [lantiq] Drop 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31670 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 12:52:19 +00:00
juhosg
ee96308b09 kirkwood: add support for the ZyXEL NSA-310 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31669 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:43 +00:00
juhosg
838f9f9085 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support 
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31668 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:41 +00:00
juhosg
843274aa37 kirkwood: enable GPIO sysfs interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31667 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:40 +00:00
juhosg
7af2aa70a5 kirkwood: nuke 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31666 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:39 +00:00
juhosg
aafa8c1910 kirkwood: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31665 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:37 +00:00
juhosg
4942fd2b79 kirkwood: add 3.3 support 
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31664 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 11:38:36 +00:00
juhosg
a944623dae ixp4xx: nuke 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31663 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:44 +00:00
juhosg
93692ad86e ixp4xx: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31662 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:43 +00:00
juhosg
fb3eca1a8e mpc85xx: remove 2.6.38 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31661 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:41 +00:00
juhosg
b39529458d mpc85xx: switch to 3.3 and add broken flag 
It is compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31660 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:39 +00:00
juhosg
eff5ef6a36 orion: nuke 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31659 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:38 +00:00
juhosg
56d769bd1e orion: switch to 3.3 and add broken flag 
It is compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31658 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:37 +00:00
juhosg
4672c91460 linux/3.3: add missing RTC symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31654 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-09 10:48:30 +00:00
juhosg
9179b1bd6b ar71xx: fix build error if PCI is disabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31646 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 21:16:22 +00:00
juhosg
fe2be6a9a3 kernel: update linux 3.3 to 3.3.5 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 20:11:43 +00:00
juhosg
6365d3e544 pxa: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31643 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 17:40:15 +00:00
juhosg
15b93cf7b1 pxa: switch to 3.3 and mark it as broken 
It is working in qemu, but it has not been tested on real hardware.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31642 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 17:40:09 +00:00
juhosg
74bfc39816 pxa: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31641 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 17:40:06 +00:00
jow
d0c031a4f5 atheros: Fix compilation 
With our recent switch to the 3.3 kernel target, some headers were
occidentally omitted.

Signed-off-by: Jonathan Bither <jonbither@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31640 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 17:06:39 +00:00
jogo
35009bdf80 bcm63xx: fix a race between PCI bus scan and fallback sprom registration 
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.

Fixes #11384.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31638 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 21:25:34 +00:00
nbd
d4d537811b kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31637 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 21:19:14 +00:00
hauke
126cc381b7 brcm47xx: add gpio_request_one() 
This fixes a compile error with kernel 3.3.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31635 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 20:44:37 +00:00
nbd
849a172d03 atheros: clean up the patches some more 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 17:15:00 +00:00
nbd
f31721e174 atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31625 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 17:08:30 +00:00
jogo
0f0f3b9f5a AR7: don't mark as broken 
Linux 3.3.4 boots fine on my AR7 device.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31623 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-06 14:04:19 +00:00
juhosg
91b12f1c40 ar7: remove 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31617 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:32:43 +00:00
juhosg
7d657a9c91 ar7: switch to 3.3 and mark the target as broken 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31616 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:32:41 +00:00
juhosg
02fb20885e ar7: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31615 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:32:39 +00:00
juhosg
1ee5e640f0 ar7: fix kernel_entry extraction 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31614 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:32:36 +00:00
juhosg
0cff4f29f3 ar71xx: add profile and build image for the TL-WR1041N v2 board 
Patch-by: Vince Huang <axishero@foxmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31610 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:02:41 +00:00
juhosg
7b820da93e ar71xx: add support for the TP-Link TL-WR1041N v2 board 
Patch-by: Vince Huang <axishero@foxmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31608 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:02:35 +00:00
juhosg
1c9cad5dce ar71xx: update 3.3 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31602 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 13:56:35 +00:00
juhosg
c39d550e2f ar71xx: fix a typo in the db120 mach file 
Reported-by: Sven Eckelmann <sven@narfation.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31601 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 13:56:30 +00:00
hauke
34b32d26b5 brcm47xx: update target to kernel 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31599 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 12:53:37 +00:00
juhosg
a6a62009fb linux/2.6.32: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31597 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:34 +00:00
juhosg
e3bebfe1fb rdc: remove 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31596 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:32 +00:00
juhosg
9ca85294f4 rdc: switch to 3.3 and mark the target as broken 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31595 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:30 +00:00
juhosg
7fa6105b4e rb532: remove 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31594 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:29 +00:00
juhosg
651eb17ddc rb532: switch to 3.3 and mark the target broken 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:26 +00:00
juhosg
dc1df9e044 rb532: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31592 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:23 +00:00
juhosg
321be1fc52 mpc83xx: remove broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31591 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:21 +00:00
juhosg
f3c883c98f mpc83xx: populate network config from an uci-default script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31590 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:19 +00:00
juhosg
109443b2af mpc83xx: cleanup rb333.dts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31589 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:16 +00:00
juhosg
d5816c8a83 mpc83xx: fix MAC addresses on the RB333 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31588 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:13 +00:00
juhosg
5dad28165e mpc83xx: fix build warnings in RB333/600 dtb wrappers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31587 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 11:43:10 +00:00
juhosg
796592856f linux/2.6.32: fix layer7 patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31586 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 07:20:13 +00:00
kaloz
73229f8d12 [omap4]: upgrade to 3.3, enable framebuffer 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31576 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-03 21:51:58 +00:00
jogo
4e31867a39 adm5120: add missing NULL terminator to partition parser list 
Fixes #11372.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31574 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-03 21:03:50 +00:00
hauke
14f0acdc28 brcm47xx: add support for kernel 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31573 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-03 20:18:41 +00:00
juhosg
9d3fb21d4a Fix iptables abuse of kernel header files. Use exported headers instead. 
[juhosg: export xt_layer7.h for all kernel versions]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31566 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-03 09:43:10 +00:00
juhosg
439a47e380 ramips: W306R V2.0 - GPIO and Network fixes 
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 19:17:59 +00:00
juhosg
1f249922ce ramips: Make serial console for DIR-300-B1 work again 
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 19:17:58 +00:00
juhosg
371f652cf1 mpc83xx: remove 2.6.36 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 18:27:26 +00:00
juhosg
d316e764cb mpc83xx: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 18:27:25 +00:00
juhosg
01415999cf mpc83xx: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 18:27:22 +00:00
juhosg
4b296a3cb3 linux/3.3: add more missing symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31552 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 18:27:19 +00:00
florian
a1c9b29340 [brcm63xx] use a define for the poll and debounce interval 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 15:40:26 +00:00
juhosg
c5006eede0 linux/3.3: add more missing symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-01 08:00:26 +00:00
juhosg
a12fd13e23 move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-01 08:00:25 +00:00
kaloz
7e7649baa9 [coldfire]: switch to 2.6.38 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31546 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-01 07:00:17 +00:00
juhosg
e51f7c5d1b kernel: update linux 3.3 to 3.3.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-30 08:38:11 +00:00
juhosg
1cfcccb5b0 linux: rtl836x: add a generic reset_switch function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31536 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:31 +00:00
juhosg
5df734f0bc linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:29 +00:00
juhosg
1dcdbf2d3f linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:26 +00:00
juhosg
f07500066e ar71xx: allow to disable link polling on unused PHYs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 18:29:24 +00:00
juhosg
b20dcb287e rb532: remove 2.6.35 support 
The generic 2.6.35 support has been remove long time ago.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 16:56:07 +00:00
juhosg
8ca642965f linux/3.3: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31531 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 16:56:03 +00:00
juhosg
be6aa90ec2 rdc: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31530 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:59:49 +00:00
juhosg
8e06d437aa mpc85xx: add support for 3.3 
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31529 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:55:28 +00:00
juhosg
c3bfb23a87 orion: add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31528 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:20:40 +00:00
juhosg
418e0144a0 linux/3.3: yet another missing symbol 
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31527 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:08:24 +00:00
juhosg
d2863cfd2d linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip 
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:08:22 +00:00
juhosg
3adac4c8e4 mpc85xx: add kmod-booke-wdt to the default packages 
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31523 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:38 +00:00
juhosg
e4a752ed29 mpc85xx: don't override CONFIG_WATHCDOG 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31521 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:36 +00:00
juhosg
95fc5670e1 linux: move CONFIG_BOOKE_WDT to the generic config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31520 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:34 +00:00
juhosg
afab35ea6e linux/2.6.36: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31519 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:33 +00:00
juhosg
b2fc0c6423 linux: add broken flag to targets which are using 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31518 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 15:00:32 +00:00
juhosg
3fa6652791 adm5120: create a new subtarget for the RB1xx devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:46 +00:00
juhosg
d50d82ab6e adm5120: share a common kernel config between the subtargets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31512 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:44 +00:00
juhosg
0c3e51f31c adm5120: merge 3.3 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31511 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:43 +00:00
juhosg
71b94eaba4 adm5120: remove 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31510 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:37 +00:00
juhosg
064b1182e5 adm5120: switch to 3.3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31509 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:36 +00:00
juhosg
f2d86d5a21 adm5120: fix macronix bootloc patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31508 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:35 +00:00
juhosg
399af78951 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31507 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:33 +00:00
juhosg
a7eaf12ead adm8668: merge 3.3 fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31497 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-28 10:41:43 +00:00
juhosg
d9edbe9c04 adm8668: nuke 2.6.36 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31496 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-28 10:39:47 +00:00
juhosg
f127c4c7b0 adm8668: switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31495 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-28 10:38:53 +00:00
florian
8812c9e533 [brcm63xx] switch to gpio-keys-polled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31491 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-27 16:44:48 +00:00
juhosg
ccfe94d5e5 linux/3.3: yet another missing symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31488 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-27 06:31:43 +00:00
hauke
b2caa2e0b5 brcm47xx: BCMA - Modified PCI CFG space access 
The existing code (prior to the patch) does an "ioremap_nocache" on a
subset of a memory region that I think has already been mapped, and then
un-maps that smaller region when it is finished.

Thanks Nathan Hintz for the patch



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31481 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 20:32:17 +00:00
juhosg
fade685a5b adm8668: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31480 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 18:53:49 +00:00
juhosg
b2a1169d98 adm8668: build gzip compressed uImage for testing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31479 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 18:53:48 +00:00
juhosg
c363d3b566 adm8668: use a suffix for initramfs images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31478 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 18:53:46 +00:00
juhosg
1d61105c25 ar71xx: enable MIB counters in the built-in switch of the AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31476 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 13:02:11 +00:00
juhosg
efae7066fc adm5120: remove 2.6.38 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31475 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 12:57:35 +00:00
juhosg
05735d303b adm5120: add 3.3 support 
Partially based on the 3.1 patches by Hartmut Knaack <knaack.h [at] gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31474 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 12:57:33 +00:00
juhosg
0e8ddda2ee linux/3.3: fix compiler warnings in the plat_nand driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31473 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 12:57:29 +00:00
juhosg
5d61cfe7e3 adm5120: make 5GXi depends on CPU_LITTLE_ENDIAN 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31472 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-25 12:57:26 +00:00
hauke
91a591d328 brcm47xx: A couple of other (inconsequential) BCMA patches 
Noticed these while reviewing the code.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31471 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 21:56:42 +00:00
hauke
ee396d93e1 brcm47xx: b44 fix workaround detection on some brcm47xx boards 
Because of api change of nvram_getenv, the workaround failed to detect the hardware.

Based on patch by b.sander

Fixes #11268.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31470 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 20:35:46 +00:00
jogo
50d9e73cdf bcm63xx: drop linux 3.2 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31464 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 11:49:27 +00:00
jogo
7a0767fe77 bcm63xx: drop linux 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31463 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 11:49:24 +00:00
jogo
30f433f1b9 bcm63xx: switch kernel to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31462 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 11:49:19 +00:00
juhosg
7318bf5df0 ar71xx: TL-WR741NDv4: add WLAN LED config 
On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31461 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 11:38:44 +00:00
jogo
aa09643423 kernel: update linux 3.3 to 3.3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31460 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 09:25:38 +00:00
jogo
b628e1e894 kernel: update linux 3.2 to 3.2.16 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31459 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 09:25:35 +00:00
jogo
c2cc410c54 kernel: add some more missing kernel config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 09:25:32 +00:00
jow
5deef26972 [generic] enable NF_CONNTRACK_PROCFS for Linux 3.3, required for /proc/net/nf_conntrack (#11339) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 00:55:57 +00:00
juhosg
81896ccacb x86: restore config-default, it is needed for 2.6.39 
Reported-by: Thomas Heil <heil@terminal-consulting.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31452 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 16:56:08 +00:00
juhosg
4e19be80f8 ramips: rt305x: add support for the UR-336UN board 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31451 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 16:56:06 +00:00
juhosg
06add57343 ramips: rt305x: add support for the Asus WL-330N3G board 
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 16:56:05 +00:00
florian
fbad451aa0 [malta] switch to 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31448 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 12:33:30 +00:00
florian
93bbaa79c6 [malta] add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 12:33:27 +00:00
florian
da04a5b2b3 [uml] switch to 3.3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 12:33:24 +00:00
florian
9b5873bbb0 [uml] add 3.3 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31445 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 12:33:19 +00:00
blogic
20486e3d63 [lantiq] Adding wifi eeprom extract for ARV752DPW - Easybox 802 
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31443 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 09:40:37 +00:00
nbd
038eed6f69 ar8216: enable forwarding of multicast frames to the cpu port on ar8327 (thx, SeG) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31441 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-22 19:19:49 +00:00
claudio
c5151773ad [at91] flexibity: Cleanup the subtarget config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-22 16:56:10 +00:00
claudio
28aee0e335 [at91] tqma9263: update board definition for 3.x series and fix config choose 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31436 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-22 09:09:53 +00:00
claudio
a559a0ea16 [at91] Remove old netus board definition 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31435 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-22 09:09:50 +00:00
juhosg
8480a04b3a ep93xx: remove 2.6.39 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31434 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-22 07:20:55 +00:00
juhosg
1961ecdaf1 amazon: remove 2.6.3{0,2} support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31433 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-22 07:20:53 +00:00
juhosg
8012e885db omap24xx: remove 2.6.38 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31426 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 17:16:40 +00:00
juhosg
b03afdd9be xburst: remove 2.6.36 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31422 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 17:03:10 +00:00
juhosg
7672aac1eb malta: remove 2.6.39 and 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31421 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:56:15 +00:00
juhosg
d4020d23e1 mpc83xx: remove 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31420 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:51:59 +00:00
juhosg
4595ebf495 octeon: remove 2.6.30 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31419 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:45:32 +00:00
juhosg
d71e7bf38e cns3xxx: remove 2.6.31 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31418 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:42:05 +00:00
juhosg
91690a98ac au1000: remove 2.6.39 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31416 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:30:40 +00:00
juhosg
955f287cac x86: remove 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31415 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:17:48 +00:00
juhosg
a33f77b6ec ixp4xx: remove 2.6.3{2,8} and 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31414 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 16:17:46 +00:00
juhosg
407157942b linux/2.6.31: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31412 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 15:18:58 +00:00
juhosg
f480dd5941 linux/2.6.30: R.I.P. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31411 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 15:18:55 +00:00
juhosg
696e0160a5 linux: add broken flag to targets which are using 2.6.30 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31410 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 15:18:54 +00:00
juhosg
3d51befa3b linux/3.3: nuke the gpio_buttons patch 
It is superseded by the in-kernel gpio-keys-polled driver.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31409 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 14:26:35 +00:00
juhosg
30a263e82e mpc52xx: nuke 3.2 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31408 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:36:47 +00:00
juhosg
0e01c6c25c mpc52xx: switch to 3.3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31407 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:36:45 +00:00
juhosg
e47ded8763 mpc52xx: add kernel config for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31406 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:36:44 +00:00
juhosg
085e737330 ramips: nuke 3.2 suport 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31405 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:53 +00:00
juhosg
caef9edf07 ramips: switch to 3.3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31404 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:51 +00:00
juhosg
0f71b77a13 ramips: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31403 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:50 +00:00
juhosg
e958af1110 ramips: rt305x: add OHCI/EHCI registration code for RT3352 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31402 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:48 +00:00
juhosg
3ff5d8da9a ramips: rt305x: fix CPU clock detection on RT3352 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31401 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:47 +00:00
juhosg
feaef768b3 ramips: rt305x: use different memory size setup for RT3352 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31400 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:45 +00:00
juhosg
fe6030a2b7 ramips: rt3883: add profile and build sysupgrade image for the RT-N56U 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31399 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:44 +00:00
juhosg
219147642d ramips: add swconfig to the default package list 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31398 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:43 +00:00
juhosg
dbbeae59d9 ramips: build initramfs image for the Fonera 2.0N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31397 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:42 +00:00
juhosg
266880e202 ramips: rt305x: add initial support for Tenda W306R V2.0 
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31396 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:40 +00:00
juhosg
ca5d81b44b ramips: remove hardcoded console parameter from kernel configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31395 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:30 +00:00
juhosg
ad4f6bb570 linux/3.3: fix crypto4xx build failure 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31394 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 10:47:04 +00:00
mirko
d2aa64852c [target/linux/lantiq] change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board 
The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31391 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 08:07:21 +00:00
juhosg
ff6ac1157f ppc40x: nuke 3.2 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31387 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 21:03:15 +00:00
juhosg
aa10a3949f ppc40x: switch to 3.3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31386 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 21:03:14 +00:00
juhosg
2beb37f70d ppc40x: sync 3.3 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31385 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 21:03:12 +00:00
juhosg
500fc02a8c ar71xx: remove duplicated AP121 Kconfig entry 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31382 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 16:50:16 +00:00
juhosg
7cb5b54352 cns21xx: remove 3.2 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31381 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 15:25:00 +00:00
juhosg
4e4fcd70ed cns21xx: switch to 3.3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31380 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 15:24:59 +00:00
juhosg
312e64a8db cns21xx: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31379 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 15:24:57 +00:00
juhosg
bbdc13d47f linux/3.3: update ARM mach-types 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31378 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 15:24:54 +00:00
claudio
7cd6ca236b [generic] Add a missing symbol for config-3.3 
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31373 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 13:33:04 +00:00
claudio
bb81a4d728 [at91] Reorganize the subtargets, group subtargets per cpu family 
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31372 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 13:33:01 +00:00
claudio
b3f6f7ff37 [at91] Update the kernel to 3.3.x series, remove patches that doesn't apply anymore 
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31371 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 13:32:55 +00:00
claudio
4280ba74a9 [at91] Ensure that the bin directory exists before copy the files 
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31370 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 13:27:16 +00:00
florian
a7429453a2 [kernel/2.6.30] remove some annoying warnings and fix snd modules build 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31365 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 13:25:26 +00:00
florian
feabb87abb [ps3] add missing config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31364 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-20 13:25:23 +00:00
juhosg
f9f658a530 ar71xx: nuke 3.2 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31360 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:32:05 +00:00
juhosg
7bc7a250f8 ar71xx: switch to 3.3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31359 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:58 +00:00
juhosg
681746fbaa ar71xx: sync 3.3 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31358 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:53 +00:00
juhosg
e386148a35 ar71xx: merge/reorganize 3.3 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31357 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:50 +00:00
juhosg
a17e6cf40e ar71xx: use ap91_pci_init for RB751{,G} 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31356 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:48 +00:00
juhosg
9b7ceff90a ar71xx: move USB device registration directly into rb751{,g}_setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31355 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:43 +00:00
juhosg
e25325e131 ar71xx: add ap9x_pci_get_wmac_data helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31354 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:42 +00:00
juhosg
9ec35a5650 ar71xx: add sanity checks to decode_rle 
Also use -EINVAL instead of -1.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31353 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:31:40 +00:00
juhosg
4cb60d0721 avr32: remove old kernel support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31352 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:23:07 +00:00
juhosg
d9a647fd52 avr32: switch to 3.3.2 
uClibc-0.9.33 causes segfaults at least in iptables.
The segfaults are present with 2.6.39 as well, so it
makes no sense to stick to that version.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31351 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:23:02 +00:00
juhosg
a763bce8ce avr32: sync kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31350 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:22:50 +00:00
juhosg
5a9adfafdb avr32: fix atomic64_t related kernel build errors 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31349 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-19 21:22:48 +00:00
florian
9fddeaf113 [cobalt] switch to 3.2.15 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31345 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-18 15:36:33 +00:00
florian
b102b5224f [generic] fix 335-mips-kexec patch for all 3+ kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31344 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-18 15:36:30 +00:00
jogo
b1f5b99f53 kernel: x86: also update subtarget kernel versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31338 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-17 21:01:43 +00:00
jogo
86acf4fb40 kernel: also update the targets to use 3.2.15 
Thanks Gabor for spotting it.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-17 13:12:14 +00:00
jogo
4f72aeefd8 kernel: update linux 3.3 to 3.3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31336 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-17 12:51:02 +00:00
jogo
d1f448b466 kernel: update linux 3.2 to 3.2.15 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31335 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-17 12:50:54 +00:00
jow
e07815ad41 [geos] bump to Linux v3.3.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31314 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-16 15:04:47 +00:00
jow
2ea2df1011 Fix bufferbloat in PPPoATM TX queue 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31313 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-16 15:04:45 +00:00
jow
b497447c4e Update ppp TX restart patch to avoid race condition 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31312 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-16 15:04:44 +00:00
blogic
86598e6363 [lantiq] adds 3.3 patches and files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31307 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-16 12:31:48 +00:00
florian
ab1585c224 [kernel/2.6.32] backport missing platform data members for gpio-keys 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31306 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-16 12:09:15 +00:00
florian
dfad2f5e19 [kernel/2.6.32] backport a missing eeprom 93cx6 define for building rt2x00 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31305 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-16 12:09:13 +00:00
florian
f1c5e9e9b3 [rdc] add missing debugging symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31302 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-16 11:38:35 +00:00
florian
2a2c7fc0b5 [kernel/2.6.32] add missing debugging symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31301 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-16 11:38:33 +00:00
florian
6a6938a637 [rb532] mark set but unused variables as such 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31296 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-15 18:53:48 +00:00
florian
2b011556a5 [rb532] refresh 2.6.32 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31295 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-15 18:53:45 +00:00
florian
6ca18c5ae1 [rdc] refresh 2.6.32 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31294 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-15 18:53:42 +00:00
florian
ff728c1e81 [generic/2.6.32] silence an annoying x86 warning 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31293 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-15 18:53:39 +00:00
hauke
4237832ef0 at91: Missing kernel config symbols for AT91 target platform 
I looked into buildbot snapshots and noticed that some platforms have 
not successfully compiled for a long time. One example is at91, which 
seems to be missing device-related kernel config symbols and the 
snapshot build crashes already there.

Please find attached a patch that makes the at91 kernel config and 
build to succeed again.

Signed off by: hannu.nyman@iki.fi


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31288 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-15 09:50:51 +00:00
hauke
6f210a8c76 brcm47xx: fix a bug in the sprom handling of bcma, this broke all bcma based SoCs. 
bcma: use fallback sprom if no on chip sprom is available


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31285 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-14 12:12:22 +00:00
hauke
1e83690598 kernel: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31279 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-13 19:37:15 +00:00
hauke
4ad28d6429 kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31278 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-13 19:35:40 +00:00
hauke
263228328e brcm47xx: remove support for kernel 3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31276 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-13 16:53:16 +00:00
nbd
2ff0c7f129 ixp4xx: add support for linux 3.3.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31275 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-13 13:38:49 +00:00