1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-28 14:48:27 +02:00
Commit Graph

9365 Commits

Author SHA1 Message Date
kaloz
3f71dabad1 [generic/3.3]: add missing symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 17:03:02 +00:00
jogo
57a6b42c70 kernel: update linux 3.3 to 3.3.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31223 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 14:48:56 +00:00
jogo
bbb153176f kernel: update linux 3.2 to 3.2.14
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 14:48:51 +00:00
jogo
21fcfbb1a2 kernel: add some more additional missing config symbols for 3.2 and 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 14:48:46 +00:00
mirko
729010e333 [target/xburst] level up target xburst to linux kernel version 3.2.1
Thanks to the qi-hardware project - especially to Lars, Maarten and Xiangfu

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-08 12:09:52 +00:00
juhosg
8b09b5ce75 ar71xx: image: build initramfs images for the WHR boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:08 +00:00
juhosg
87485f3a88 ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:07 +00:00
juhosg
4afe9df355 ar71xx: add rb750 to diag.sh
Support status led in diag.sh for RB750

Patch from: Evangelos Arkalis <arkalis.e@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:04 +00:00
blogic
a73a270eb0 [lantiq] add Easybox 802 - ARV752DPW
Implements the ARV752DPW architecture in mach-arv.c

Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-05 20:03:21 +00:00
blogic
b13c35b00f [lantiq] enable usb on dgn3500
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse.

Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31205 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-05 20:03:19 +00:00
florian
8948cb2814 [orion] generic: use magic_long in sysupgrade
Signed-off-by: Matthias Bücher <mail@maddes.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31200 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 16:06:29 +00:00
florian
c0ade48327 [orion] update wrt350nv2-builder to v2.4 and use new functionality for target orion_generic
Signed-off-by: Matthias Bücher <mail@maddes.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31199 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 16:06:25 +00:00
florian
8675646119 [orion] add support for D-Link DNS-323
this patch adds support for D-Link DNS323 storage device.
You can find more info here:

http://dns323.lukaperkov.net/

Currently you need serial cable to flash OpenWrt on DNS-323.

Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net >

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31198 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:55 +00:00
florian
ff7c3c6481 [kernel/3+] add missing DM/MD config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31197 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:52 +00:00
florian
f4c6500322 [adm5120] fix typos in adm5120 switch driver (#4241)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31196 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:15 +00:00
florian
1a38049d59 [adm5120] add Edimax specific MAGIC_MAC_BASE to read MAC from flash (#4241]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:12 +00:00
florian
002c3c6652 [adm5120] fix support for 2.6.38 kernel
This patch fixes the following issues I encountered while compiling kernel 2.6.38.8 for my Omnima Embedded Controller/Edimax BR6104KP:
    - kernel comes up with machine selection during build, even though everything was properly set in menuconfig
    - USB api changes
Successfully built and tested with r29755.

Signed-off-by: Hartmut Knaack <knaack.h [at] gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:09 +00:00
florian
afad2e49db [adm5120] refresh 2.6.38 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:07 +00:00
florian
0432b2b9b9 [kernel/2.6.38] fix gcc-4.6 set but unused warnings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:04 +00:00
florian
0d6d67e4b9 [kernel/2.6.38] refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:01 +00:00
jogo
f21c103e5a kernel: update linux 3.2 to 3.2.13 and refresh patches
Also remove a duplicate patch from lantiq (already in generic).

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-01 07:56:55 +00:00
jogo
1efef1fe09 kernel: add some more missing kernel symbols for 3.2 and 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31157 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-01 07:56:49 +00:00
jogo
c96723ae75 kernel: add some more missing serial 8250 config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-30 08:11:01 +00:00
jow
8600b97ee6 ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29 16:03:04 +00:00
hauke
62249258d3 brcm47xx: fix memory leak, backport from the mainline kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29 15:44:06 +00:00
hauke
180c221031 brcm47xx: add missing breaks into the nvram read code in the switch case statements
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29 15:43:16 +00:00
nbd
5ace2c89ed kernel: restore ebtables functionality by running netfilter hooks when the ebtables module is loaded
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31141 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29 14:15:54 +00:00
jogo
af89f0c95c bcm63xx: enable bcm6368 for linux 3.3 and build images
Only build bcm6368 images when building for linux 3.3.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:37 +00:00
jogo
b8d5619ca8 bcm63xx: add initial support for bcm6368 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:34 +00:00
jogo
03e726c2ae bcm63xx: add driver for the internal hw trng on bcm6368
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:30 +00:00
jogo
769a390d81 bcm63xx: replace SPI driver with latest upstream version
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:25 +00:00
jogo
9bb8c69134 bcm63xx: add ethernet support for bcm6368
Add basic support for the internal ethernet switch on bcm6368. It behaves
as a dumb switch for now, but allows basic connectivity.

Also drop the ethernet patch for bcm6345 for now, it needs rework.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:20 +00:00
jogo
c5a8e48574 bcm63xx: add missing bits from extirq support
Add missing external IRQ code parts for older chips in the new code.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:15 +00:00
jogo
f3b449288b bcm63xx: reorder patches
Reorder patches for a clearer distinction between the purposes of
the different patches.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:09 +00:00
hauke
d2f6c11460 brcm47xx: update flash drivers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 17:03:18 +00:00
mirko
af3d648420 Revert commit 31091 - "[target/xburst] remove set but unused variable which leads into compiling errors with GCC >= 4.6.0"
'set-but-unused-variable'-issues are dealt with in a generic way now

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 15:28:21 +00:00
mirko
10c82db728 [target/generic] deal with 'set-but-unused-variables' in a more generic way
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 15:28:13 +00:00
hauke
e32d309b26 brcm47xx: BCMA - Consolidate/reduce code in bcma_device_name
Eliminate unneeded procedure by incorporating code into bcma_device_name

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 09:36:50 +00:00
hauke
98aade835d brcm47xx: BCMA - Always map 4 bytes
This probably doesn't matter, but reads/writes are always 4 bytes, so always map 4 bytes.

Changes since v1: Moved changes to new patch file (234-bcma-always-map-4-bytes.patch).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 09:35:01 +00:00
juhosg
7bc411c5d9 ar71xx: boost SPI flash read performance
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:17 +00:00
juhosg
ac19ad9ae4 ar71xx: improve SPI flash read/write performance
mtd_speedtest results:

                        page write speed
                    old         new       delta
DB120            209 KiB/s   226 KiB/s     +8.13%
TL-WR1043ND v1   122 KiB/s   148 KiB/s    +21.31%
TL-WR703N v1     153 KiB/s   194 KiB/s    +26.80%
TL-MR3220 v1     130 KiB/s   156 KiB/s    +20.00%
TL-WR2543ND v1   158 KiB/s   202 KiB/s    +27.85%
TL-WR741ND v2    122 KiB/s   152 KiB/s    +24.59%
ALFA AP96        229 KiB/s   260 KiB/s    +13.54%
WNDR3700         202 KiB/s   223 KiB/s    +10.40%

                         page read speed
                    old        new       delta
DB120            691 KiB/s   929 KiB/s    +34.44%
TL-WR1043ND v1   372 KiB/s   754 KiB/s   +102.69%
TL-WR703N v1     375 KiB/s   745 KiB/s    +98.67%
TL-MR3220 v1     372 KiB/s   752 KiB/s   +102.15%
TL-WR2543ND v1   307 KiB/s   564 KiB/s    +83.71%
TL-WR741ND v2    315 KiB/s   525 KiB/s    +66.67%
ALFA AP96        515 KiB/s   702 KiB/s    +36.31%
WNDR3700         515 KiB/s   697 KiB/s    +35.34%

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:15 +00:00
juhosg
ad01160aa2 ar71xx: image: build initramfs images for more boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:13 +00:00
juhosg
bba495fb6f ar71xx: image: add MkuImage{Gzip,Lzma}/initramfs helpers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:11 +00:00
juhosg
3b5a6363a0 ar71xx: image: pass mtdlayout variables by value
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:10 +00:00
juhosg
9f6d45184a ar71xx: image: use MkuImageGzip in Image/Build/AthGzip/initramfs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:08 +00:00
juhosg
32fd04f49a ar71xx: remove the built-in MTD map of the AP96 board
Pass the mtd_layout via the kernel command line instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:07 +00:00
juhosg
514a769538 ar71xx: remove the built-in MTD map of the PB92 board
Pass the mtd_layout via the kernel command line instead

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:05 +00:00
juhosg
5ca96e340c ar71xx: remove the built-in MTD map of the Zcomax devices
Pass the mtd_layout via the kernel command line instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:04 +00:00
juhosg
5ba8709ee9 ar71xx: reclaim the 'user_property' partition on WHR-* boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:02 +00:00
juhosg
e27017a728 ar71xx: remove the built-in MTD maps of several boards
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:

 * AP113
 * ALFA N2/N5
 * DIR-600
 * DIR-615
 * DIR-825
 * TEW-6{3,5}2BRP
 * TEW-673GRU
 * WHR-G301N
 * WHR-HP-GN
 * WHR-HP-G300N

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:01 +00:00
juhosg
603bb2bb6e ar71xx: use modules for LED triggers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:59 +00:00
juhosg
52b72cdab7 ar71xx: disable CONFIG_{I2C,SPI}_GPIO
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:53 +00:00
juhosg
6891d42521 ar71xx: sync 3.3 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:52 +00:00
juhosg
70b0829237 ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:51 +00:00
juhosg
7c8edac25f ramips: rt305x: build image for the DIR-615 rev D boards
Patch from #10105.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:29:59 +00:00
juhosg
467d4cf199 ramips: rt305x: add add support for the Asus WL-330N board
[juhosg: reorder several lines in order to keep things sorted
alphabetically]

Signed-off-by: Frédéric Leroy <fredo@starox.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:29:57 +00:00
florian
87dc5ab9db [generic] ppp: Fix high softirq utilization with pppoa
Users of the Geos platform are reporting high CPU utilization.
This seems to be rooted in a problem with the TX queue restart in PPP.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 17:47:44 +00:00
florian
26a7be32ea [kernel/3.3] add missing INET_UDP_DIAG symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 17:47:41 +00:00
florian
52a44a70ae [x86] geos: add 'tc' and kmod-sched for bonding
The Geos2 includes 2 ADSL+ interfaces, and as such it needs to have the TEQL scheduler for bonding.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 17:47:37 +00:00
hauke
550b5a8a06 brcm47xx: update sprom patches like they are in the mainline kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 17:07:28 +00:00
mirko
82d90cbeb1 [target/xburst] remove set but unused variable which leads into compiling errors with GCC >= 4.6.0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 16:29:19 +00:00
hauke
93a0a2c288 brcm47xx: update usb driver to the version send for mainline kernel integartion
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 15:38:56 +00:00
nbd
9f0871090d ath9k: make endian check optional
Turns out it triggers on some AR71xx devices where no swapping should be done.
Enable endian check for the lantiq target.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 13:21:53 +00:00
blogic
5da154a599 [lantiq] cleanup atheros wifi handling
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:38 +00:00
blogic
cc457ef6dc [lantiq] cleanup image makefile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:32 +00:00
blogic
5e588d2fdb [lantiq] update /etc/uci-defaults/*
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:30 +00:00
blogic
437ba8c432 [lantiq] update profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:27 +00:00
blogic
4c8d6ad4d0 [lantiq] bump kernel to 3.2.12
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:09 +00:00
blogic
61a78f8450 [ar8216] fixes breakage introduced in 776722ce36ac95877efb7fd771dde2f6ffc96433
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-22 13:07:34 +00:00
ryd
0e4c67b63a Disable keyboard for x86 default config - revoke patch 30966
This was already fixed by commit 30309 and is part of generic x86 target.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31052 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-21 19:10:02 +00:00
juhosg
3a64a2209c linux: refresh patches against 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31047 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-20 15:55:07 +00:00
juhosg
4da38bec42 linux/3.{2,3}: yet another missing NET_VENDOR symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-20 15:55:04 +00:00
juhosg
281c1076f3 ar71xx: fix IRQ number for the AR7240 OHCI controller
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-20 15:02:48 +00:00
jow
b0439c1a11 [rdc] base-files: gracefully handle empty variables in preinit (#11155)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 20:37:12 +00:00
juhosg
77ec3b2de9 kernel: update linux 3.2 to 3.2.12
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31028 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 18:23:31 +00:00
juhosg
36a8c139f1 ar71xx: disable unused file system drivers in the nand subtarget
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:07 +00:00
juhosg
6c06680875 ar71xx: sync kernel configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:06 +00:00
juhosg
fd48e871d0 ar71xx: add initial support for RB750GL
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31025 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:04 +00:00
juhosg
c8aab4b6c2 ar71xx: make rb750_latch_change 'static void'
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31024 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:03 +00:00
juhosg
58ce76e6b5 ar71xx: add latch_change field to rb750_led_platform_data
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31023 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:01 +00:00
juhosg
e929396e19 ar71xx: add platform data for the RB750 NAND driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:56:59 +00:00
kaloz
e318fce641 [ppc44x]: upgrade to 3.2, disable ppp by default until we figure out why ppp_generic breaks bootup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31020 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:27:34 +00:00
kaloz
9afed7a1a0 [generic]: add missing Kconfig symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:26:15 +00:00
juhosg
bbdc83e3fc ar71xx: use a different pll value on DB120
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:11:22 +00:00
juhosg
1a9e33b337 ar71xx: add AR934x specific interface speed setup for ge0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:11:20 +00:00
juhosg
912934742d ar71xx: remove static MTD maps from AP121/DB120 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:11:19 +00:00
nbd
c746848b47 targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 09:58:13 +00:00
juhosg
1430d7ad5e ar71xx: use AR8327 on the DB120 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:58 +00:00
juhosg
17df14bf19 generic: ar8216: add support for the AR8327 chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:55 +00:00
juhosg
a79728bb5c generic: ar8216: allow to use more ports
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:51 +00:00
juhosg
3f02078b26 generic: ar8216: reorder chip specific functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:48 +00:00
juhosg
28857571f7 generic: ar8216: reorder switch_dev specific functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:45 +00:00
juhosg
bc46e3f21c generic: ar8216: use ar8216_sw_ prefix for switchdev related functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:42 +00:00
juhosg
76c970bba3 generic: ar8216: use switch_dev->ports in for loops
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:40 +00:00
juhosg
6db6793b7a generic: ar8216: add read_port_status field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:39 +00:00
juhosg
c4c471bd64 generic: ar8216: add init_globals field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:36 +00:00
juhosg
30a5115c48 generic: ar8216: add caps field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:33 +00:00
juhosg
c097ab2bbd generic: ar8216: add vtu_load_vlan field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:30 +00:00
juhosg
6934b97c4e generic: ar8216: add vtu_flush field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:26 +00:00
juhosg
d29edcf013 generic: ar8216: add init_port field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:23 +00:00
juhosg
9aeb2624ac generic: ar8216: add setup_port field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:19 +00:00
juhosg
f54b65f008 generic: ar8216: add hw_init field to ar8xxx_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:15 +00:00
juhosg
5e670215a9 generic: ar8216: add a separate structure for chip specific stuff
Also add a hw_init function into that.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:12 +00:00
juhosg
b9fa24dba2 generic: ar8216: rename chip field of struct ar8216
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:08 +00:00
juhosg
166dc561a1 generic: ar8216: move ar8216_id_chip function
Also remove the inline annotation.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:05 +00:00
juhosg
b7facc3842 generic: ar8216: rename ar8216_ops to ar8216_sw_ops
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:03 +00:00
jow
54bd644e36 [x86] alix2: add require crypto kmods (#10410)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 18:56:02 +00:00
juhosg
ba7e10c7ec cns21xx: build uImage for the NS-K330
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 12:07:56 +00:00
juhosg
fc13d7d248 cns21xx: remove 2.6.3x support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 12:07:51 +00:00
juhosg
1f29b1e321 cns21xx: switch to 3.2.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 12:07:50 +00:00
juhosg
5753696f3e cns21xx: add support for 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 12:07:48 +00:00
ryd
416f12e02a Enable keyboard for x86
This is required for qemu like descripted in
here http://wiki.openwrt.org/doc/howto/qemu



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-17 21:32:08 +00:00
nbd
d16a17a54c kernel: improve profiling support, keep static symbols when profiling is enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-17 13:03:14 +00:00
florian
f7aa21af67 [uml] remove support for old kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-17 11:55:59 +00:00
florian
f44d14c5d1 [uml] switch to 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-17 11:55:56 +00:00
florian
a53be8ccd2 [uml] add support for 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-17 11:55:53 +00:00
florian
35c3f29108 [kernel/3.2] add some more missing symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-17 11:55:49 +00:00
juhosg
9db5393790 ar71xx: add profile and generate image for the JA76PF2 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 18:00:40 +00:00
juhosg
be8e44bc68 ar71xx: add support for the jjPlus JA76PF2 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 18:00:34 +00:00
juhosg
aaa7c394a3 ar71xx: change LED name prefix on the jjplus boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 18:00:26 +00:00
juhosg
f59b34bf02 mpc52xx: switch to 3.2.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 15:35:00 +00:00
nbd
e2f9a07f36 kernel: optimize out remaining netfilter hooks in the bridging code if bridge filtering is disabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 09:21:59 +00:00
nbd
a2e617077c swconfig: use a mutex instead of a spinlock, many swconfig calls sleep
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-15 19:32:31 +00:00
nbd
b5e9c6c090 ar8216: fix a MTU related regression
Switch reset on AR8316 appears to clobber the MTU configuration register
and possibly other global config registers. Move global configuration
register init writes back to the reset callback.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-15 16:57:27 +00:00
juhosg
263a705cc6 ar71xx: move micrel PHY driver to the generic linux target
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-15 09:25:53 +00:00
juhosg
d434128dd1 linux/3.3: build mdio_register_board_info into the kernel if PHYLIB is selected
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-15 09:25:49 +00:00
juhosg
c69dbabba4 linux/3.2: build mdio_register_board_info into the kernel if PHYLIB is selected
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30944 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-15 09:25:47 +00:00
hauke
f07caed264 brcm47xx: add support for NAND flash on devices using bcma
This patch add support for the NAND flash on BCM5357 based devices like the WNR3500Lv2.

Thank you Tathagata Das <tathagata@alumnux.com> for the patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30943 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-14 22:59:39 +00:00
hauke
40687c5162 brcm47xx: move and rename the patches
The patches are now grouped by the part what they are doing and are using three digest numbers.

This does not remove or adds anything


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-14 21:48:23 +00:00
jogo
a86ab8d8ff lantiq: load dwc_otg early
Needed for using external rootfs on usb sticks.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-14 10:59:52 +00:00
juhosg
ab881f8a9d generic: ar8216: merge multiple if statements in ar8216_hw_apply
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30928 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:33:12 +00:00
juhosg
1d9a77e99f ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:38 +00:00
juhosg
0fced5df74 ar71xx: ag71xx: start aneg on switch PHYs after reset
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:37 +00:00
juhosg
9d0c4ce009 ar71xx: ag71xx: poll PHY status of all available switch ports
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:36 +00:00
juhosg
d2b8246b44 ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:34 +00:00
juhosg
f9450e76b1 ar71xx: reset the switch on AR934x before ethernet device registration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:33 +00:00
juhosg
4501ad5f3b ar71xx: fix a typo in ar71xx_regs.h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:31 +00:00
florian
2564046cdc [brcm63xx] remove udc patch since it is unused
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 14:06:44 +00:00
nbd
baf14aebfc kernel: bypass all netfilter hooks if the sysctls for that functionality have been disabled - eliminates the overhead of enabling CONFIG_BRIDGE_NETFILTER in the kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 10:06:45 +00:00
juhosg
510f76eab5 ar71xx: use a dummy callback for interfaces with fixed speed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30913 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 20:38:58 +00:00
juhosg
710f4ecdd1 ar71xx: merge ar934x_bo_ddr_flush patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 20:38:57 +00:00
juhosg
da951178da ar71xx: enable UART function for early_printk/console
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 17:32:39 +00:00
juhosg
875cf3ebbe linux/3.3: refresh patches against 3.3-rc7
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 17:32:38 +00:00
juhosg
60c3984e2b ramips: rt305x: add profile for the AZtech HW-5503G board
Patch from #11085.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30907 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 17:29:06 +00:00
juhosg
4714563903 linux/3.3: allow to set platform_data for phy devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 16:28:01 +00:00
juhosg
170eccd8a7 linux/3.2: allow to set platform_data for phy devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 16:28:00 +00:00
juhosg
d4fa1a974d linux/3.3: add missing config symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 16:27:58 +00:00
juhosg
c385265566 ar71xx: remove a 3.3 patch, it is already in 3.3-rc7
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 16:27:57 +00:00
juhosg
918793b48a ar71xx: fix Compex WPE72 detection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 16:27:56 +00:00
juhosg
c74f622197 ramips: add RT3350 detection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 16:12:13 +00:00
jow
d4b1ee15d1 [generic] expose CONFIG_NETFILTER_NETLINK for external kmods
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 00:09:23 +00:00
juhosg
6eda38a432 ramips: rt305x: rewrite SoC detection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 19:05:59 +00:00
juhosg
2886c1d472 ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_*
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 19:05:57 +00:00
juhosg
5a2708d192 ramips: replace RALINK_SOC_* macros with global variables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 19:05:56 +00:00
juhosg
9fb8ca891c ramips: introduce ramips_soc_prom_init and move SoC detection into that
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 19:05:53 +00:00
juhosg
86b5f9e15f generic: ar8216: use usleep_range in ar8216_mii_{read,write}
msleep(1) can sleep for up to 20ms.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 17:19:14 +00:00
juhosg
91f1cdc854 generic: ar8216: add a helper function for writing PHY debug registers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 16:49:35 +00:00
juhosg
7c3e076bdf generic: ar8216: add lockep assertion to ar8216_rmw
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 16:49:33 +00:00
juhosg
46495ea2d9 ramips: build initramfs image for DIR-{3,6}00 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 16:39:31 +00:00
juhosg
1df87f4bee linux/3.3: show correct name for MIPS 24KEc in /proc/cpuinfo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 16:39:30 +00:00
juhosg
a26c9305b4 linux/3.2: show correct name for MIPS 24KEc in /proc/cpuinfo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 16:39:28 +00:00
juhosg
cd601754a4 ramips: allow to use DSP ASE on RT3xxx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 16:39:26 +00:00
juhosg
5539c13cff ar71xx: stop image building if a loader is missing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 14:03:28 +00:00
hauke
291b4a98c4 brcm47xx: make patch apply
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 13:36:46 +00:00
hauke
c0db65fee9 brcm47xx: BCMA - Find names of non BCM cores
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 12:55:20 +00:00
hauke
a1294657c3 BCMA - Account for variable PCI memory base/size
Thank you Nathan Hintz for the patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 12:52:43 +00:00
hauke
4f345fdc56 BCMA - Reorder SPROM fill
The SPROM is initialized in bcm47xx_fill_sprom, so move the call to bcm47xx_fill_sprom_ethernet after it.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 11:50:59 +00:00
juhosg
4c5cdbb16b generic: ar8216: coding style cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30857 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-08 10:21:14 +00:00
juhosg
9044daabf7 generic: ar8216: don't use static variable in ar8236_hw_init
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-08 10:21:12 +00:00
juhosg
d118a7af95 generic: ar8216: move register inititalization into hw_init
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-08 10:21:11 +00:00
juhosg
7c5576c278 generic: ar8216: set chip type directly in ar8216_id_chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-08 10:21:10 +00:00
juhosg
1130aa078f generic: ar8216: simplify ar8216_config_init
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30853 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-08 10:21:08 +00:00
juhosg
c9de293cbb ar71xx: add watchdog driver to the default package list
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-08 09:00:17 +00:00
juhosg
5cec240735 linux/3.{2,3}: even more NAND symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 22:32:54 +00:00
juhosg
f69d75cd5e ar71xx: fix WPS button polarity on TL-WR2543N
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 19:50:53 +00:00
juhosg
823a90641e generic: ar8216: move port initialization into a separate function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:46 +00:00
juhosg
f7dadcb854 generic: ar8216: improve ar8216_wait_bit function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:45 +00:00
juhosg
47f3a7dbc1 generic: ar8216: use ar8216_read_port_link to get the CPU port link parameters
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:43 +00:00
juhosg
f8b56bc9d2 generic: ar8216: use the generic get_port_link implementation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:42 +00:00
juhosg
b1fa0c1a37 generic: rtl8367: use the generic get_port_link implementation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:40 +00:00
juhosg
1f9f293936 generic: rtl8366s: use the generic get_port_link implementation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:38 +00:00
juhosg
34271f8723 generic: rtl8366rb: use the generic get_port_link implementation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:37 +00:00
juhosg
d32129c110 ar71xx: ag71xx: fix get_port_link callback
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:35 +00:00
juhosg
4a420c6fa2 ar71xx: ag71xx: use the generic get_port_link implementation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:34 +00:00
juhosg
e660b7606b generic: swconfig: add a generic get_port_link implementation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30839 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:33 +00:00
juhosg
6977635623 generic: ar8216: use mdiobus_write in ar8236_hw_init
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:31 +00:00
juhosg
044f0f9c5a generic: ar8216: use bus->mdio_lock directly in ar8216_mii_{read,write}
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:30 +00:00
juhosg
6ac61155e0 generic: ar8216: fix phy driver name
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 16:32:28 +00:00
jow
e94efa5d8e [generic] enable EFI partition support by default, adds ca. 8K uncompressed on ar71xx (#8672)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 14:14:52 +00:00
juhosg
7faa796dd3 linux/3.2: fix crypto4xx build failure
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07 11:57:49 +00:00
juhosg
0201c4a9a8 linux/3.1: add missing NAND symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05 18:01:54 +00:00
juhosg
be49435553 linux/3.0: add missing NAND symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05 18:01:52 +00:00
florian
51118e2cb8 [brcm63xx] remove 3.1 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05 16:50:42 +00:00
florian
3db8db156f [brcm63xx] rename 96348GW-1{0,1}-gen to 96348GW-1{0,1}-generic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05 14:49:34 +00:00
florian
f6da629e31 [brcm63xx] generate generic images for BCM96358VW and BCM96358VW2 (#10666)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05 14:49:31 +00:00
florian
35958232eb [brcm63xx] wire bcm96348gw-10 reset button (#10854)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05 14:23:45 +00:00
florian
18982296c7 Merge branch 'bcm63xx'
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05 13:29:54 +00:00
nbd
1a06585f6d kernel: fix powerpc unused-but-set variables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05 00:51:12 +00:00
nbd
4e7ffa2545 kernel: remove the crtsavres dependency, the patched gcc will no longer emit references to that code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05 00:51:08 +00:00
nbd
7485bf2113 kernel: fix vmalloc stack traces triggered by module with an empty init section (mostly happens on x86)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05 00:12:44 +00:00
juhosg
b3a7f52fd6 linux/3.3: add more NAND symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-04 18:23:59 +00:00
juhosg
f0227ffae9 linux/3.2: add more NAND symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-04 18:23:56 +00:00
juhosg
a88314062b ramips: add support for unbranded XDX-RN502J board
This patch adds support for routers using a PCB marked XDX-RN502J
V2.0, such as some unbranded routers like this:

http://www.mediafire.com/?8acv87h6snn9fj6
http://www.mediafire.com/?do7xonw7scor4kn
http://www.mediafire.com/?1ad49zvx3e7jyix
http://www.mediafire.com/?i46cqiq66maa197

http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html

some reports also state the Aceex 22Y uses the same board.

more information can be found in the following openwrt forum post
https://forum.openwrt.org/viewtopic.php?id=34878

[juhosg: fix checkpatch warnings, use the GENERIC_4M template]

Signed-off-by: bruno schwander <bruno@tinkerbox.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-04 16:09:13 +00:00
juhosg
6e1646817e ramips: board support for Asus RT-N10+
[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]

Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-04 16:09:11 +00:00
juhosg
bcaf6136f4 ppc40x: preliminary support for 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-04 12:39:46 +00:00
juhosg
6e6999c3a1 linux/3.3: add missing config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-04 12:39:44 +00:00
juhosg
19cbc62044 linux/3.2: add missing NAND symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-04 12:39:42 +00:00
juhosg
d5161a8aa9 ar71xx: refresh patches against 3.3-rc5
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-03 14:10:29 +00:00
juhosg
bfc29614e5 linux/3.3: merge recent ubifs patches from 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-03 14:10:27 +00:00
juhosg
251353c250 linux/3.3: refresh patches against 3.3-rc5
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30799 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-03 14:10:24 +00:00
nbd
2f3210027c omap24xx: fix compile error with new binutils (#11072)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30798 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-03 12:00:48 +00:00
juhosg
7f4e210d6f linux/3.2: add symlink xattr support to ubifs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 23:09:00 +00:00
juhosg
f2f3e7072a linux/3.2: add XZ decompression support to ubifs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 23:08:59 +00:00
juhosg
241aa9defd linux/3.2: add XZ decompressor support to crypto
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 23:08:56 +00:00
juhosg
a0784c78e1 ppc40x: switch to 3.2.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30791 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 18:04:02 +00:00
juhosg
68f91f9c17 linux/3.2: add a bunch of missing symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 18:04:01 +00:00
juhosg
087640c854 ppc40x: fix build errors in the CF and ISP116X drivers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 18:03:59 +00:00
florian
d45352ad01 [adm8668] mark variables as might be unused
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 13:23:38 +00:00
florian
8f83f6c6c3 [adm8668] remove unused variables and defines
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30786 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 13:23:35 +00:00
florian
057ff99ae1 [kernel/2.6.39] MIPS: fix kexec build on 64-bits targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 13:19:13 +00:00
florian
fe9bc76c6b [kernel/2.6.39] refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 13:19:10 +00:00
florian
e2d176b262 [kernel/2.6.39] MIPS: fix printing of size_t arg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 13:19:08 +00:00
florian
ecd739427b [kernel/2.6.37] MIPS: mark unused variables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30782 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 13:19:05 +00:00
florian
ae774d3615 [kernel/2.6.37] refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 13:19:02 +00:00
florian
8e5a93687f [kernel/2.6.36] MIPS: mark unused variables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30780 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 13:19:00 +00:00
florian
a4906e04da [kernel/2.6.36] refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30779 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 13:18:56 +00:00
florian
5929a7798b [kernel/2.6.32] MIPS: mark unused variables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30778 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 13:18:53 +00:00
florian
f704d60b0b [kernel/2.6.32] refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30777 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 13:18:47 +00:00
juhosg
78859ab57d ar71xx: ag71xx: keep VLAN tags if VLAN is not enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30768 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-01 19:49:05 +00:00
juhosg
57b73bf423 kernel: update linux 3.2 to 3.2.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30767 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-01 19:49:02 +00:00
hauke
d861364e21 brcm47xx: use kernel 3.2 by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30751 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-28 20:12:46 +00:00
jow
61489954f3 [generic] revert unrelated change in previous commit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-27 09:34:31 +00:00
jow
294b1ab0fc [generic] partly revert r30708, it breaks various arches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-27 09:33:36 +00:00
juhosg
c369186781 ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loop
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-26 10:54:13 +00:00
juhosg
bcc8770afa ramips: raeth: add rx_info structure
This helps to reduce code size on RX path:

add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12)
function                                     old     new   delta
ramips_eth_open                             1104    1144     +40
ramips_ring_free                             212     232     +20
ramips_eth_stop                              400     408      +8
ramips_eth_rx_hw                             648     592     -56

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30732 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-26 10:54:12 +00:00
juhosg
c3157bd40e ramips: raeth: add tx_info structure
This helps to reduce code size on TX path:

add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36)
function                                     old     new   delta
ramips_eth_open                             1048    1104     +56
ramips_eth_tx_housekeeping                   156     148      -8
ramips_ring_free                             224     212     -12
ramips_eth_stop                              420     400     -20
ramips_eth_hard_start_xmit                   480     428     -52

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30731 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-26 10:54:10 +00:00
nbd
adfe634bb8 ixp4xx: fix a compile error
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-25 22:12:11 +00:00
jow
1c824716f1 [generic] add some missing 2.6.39 kernel symbols observed on x86/generic builds
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-25 13:17:32 +00:00
jow
eb0c9b79d7 [x86] enable RTC_CLASS for Linux 3.2 and 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-25 13:06:26 +00:00
juhosg
b83545fa99 ramips: raeth: don't process disabled interrupts
Also rename the 'fe_int' variable.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-25 11:59:19 +00:00
juhosg
ebeffb64e9 ar71xx: use v6.0.0 in UBTN-XM firmwares (closes #11038)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-24 20:41:38 +00:00
juhosg
86f0a453a3 ramips: fix FONERA20N image generation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-24 16:18:46 +00:00
jow
73c4fa4d10 config: deprecated symbol CONFIG_LEDS_GPIO_PLATFORM
CONFIG_LEDS_GPIO_PLATFORM went away a while ago.

http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commit;h=2bcc7ed5b83b0a59c6976476e8788675038fb11b

Also, most platforms comment out CONFIG_LEDS_GPIO but not x86 for some reason.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-24 10:35:20 +00:00
juhosg
e59f7e59ce ramips: image: increase minimum kernel partition size to 896k
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:16 +00:00
juhosg
aef9836e3e ramips: image: cleanup and sort templates/profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:15 +00:00
juhosg
3512e35131 ramips: image: use GENERIC_4M template for the ALL0256N board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:14 +00:00
juhosg
3bc6de1a9c ramips: image: introduce mkmtd/{,phys,spi} helpers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:12 +00:00
juhosg
8674a3608c ramips: image: pass mtdlayout variables by value
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:11 +00:00
juhosg
1a418e58fd ramips: image: merge F5D8235V{1,2} templates
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:10 +00:00
juhosg
2114850f4f ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:07 +00:00
juhosg
de6db64de9 ramips: image: introduce mkcmdline helper
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:06 +00:00
juhosg
c329c451b2 ramips: image: use the GENERIC_4M template for the V11ST-FE board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:04 +00:00
juhosg
550d82fa19 ramips: image: simplify Makefile a bit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30697 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:03 +00:00
juhosg
77394481fe ramips: image: add MkImageLzma wrapper
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:02 +00:00
juhosg
eada36fe53 ramips: image: allow to build board specific initramfs images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:01 +00:00
blogic
2f20008d73 [atm] drop backported patches as they cause regressions and oopses
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 07:42:04 +00:00
blogic
1863b32a32 [lantiq] fixes etop locking issue
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30689 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 07:42:00 +00:00
juhosg
f8f3c2b274 ramips: merge identical switch configuration entries
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22 19:46:19 +00:00
juhosg
180721623a ramips: use unified switch identifiers in uci-defaults/network
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22 19:46:17 +00:00
juhosg
88c727bd85 ramips: fix VLAN config of the RT-N15
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22 19:46:15 +00:00
juhosg
edd0b0744e ramips: raeth: show interrupt statistics in debugfs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22 13:06:44 +00:00
juhosg
fe2aef1465 ramips: raeth: add debugfs support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22 13:06:42 +00:00
juhosg
487e30dc6b ramips: raeth: rename main source file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22 13:06:41 +00:00
juhosg
8b52220866 ramips: raeth: add missing Kconfig and Makefile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-21 09:44:30 +00:00
juhosg
3ac2b4e29a ramips: move the ethernet driver into a separate directory
Also clean up the Kconfig symbols.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-21 09:26:43 +00:00
juhosg
d7185880b9 ramips: rename the spi driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-21 09:26:41 +00:00
nbd
70862d497d ar71xx: switch to kmod-gpio-button-hotplug
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-20 10:51:48 +00:00
nbd
1002850a01 kernel: strip unnecessary symbol table information from kernel modules, reduces default squashfs size on ar71xx by about 4k
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-20 09:03:17 +00:00
juhosg
342ac43e68 ramips: rt3883: make rt3883_nand_data visible
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 19:40:37 +00:00
juhosg
5b5e6922c6 ramips: merge 3.2 fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 17:52:23 +00:00
juhosg
5e8b0f2f94 ramips: nuke 2.6.39 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 17:52:20 +00:00
juhosg
e1527acc5f ramips: rt305x: nuke built-in MTD partition maps
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 17:52:15 +00:00
juhosg
058c28d6fe ramips: rt288x: nuke built-in MTD partition maps
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 17:52:11 +00:00
juhosg
68d60e45f2 ramips: build sysupgrade image for the V11ST-FE board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 17:52:08 +00:00
juhosg
f6ba1d4f8c ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router
[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]

Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 16:44:49 +00:00
hauke
ddd5150a30 brcm47xx: add code to generate images for some netgear devices
This is commented out until we get report of working devices.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 23:21:47 +00:00
hauke
035f06d698 brcm47xx: sprom for nvram parsing
This adds support for parsing sprom form nvram for sprom version form 1 to 9.
It also adds sprom from nvram support for devices on the bcma bus.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 23:08:26 +00:00
juhosg
7005c79799 ralink: rt3883: disable the 2GHz band on the RT-N56U
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30632 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 17:36:21 +00:00
juhosg
78d0623f6c ramips: rt3883: make rt3883_wlan_data visible
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 17:36:16 +00:00
juhosg
694c4439dc generic: add disable_[25]ghz to struct rt2x00_platform_data
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 17:36:13 +00:00
juhosg
8930617368 ar71xx: fix image signature for UBNT-XM boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 14:45:52 +00:00
juhosg
a03baaa96f generic/2.6.37: fix 'set but unused' build errors on MIPS
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-17 17:21:03 +00:00
juhosg
c2da468a0c ramips: extract eeprom for the built-in wlan module on the RT-N56U
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 20:06:22 +00:00
juhosg
37f21ebf4d ramips: rt3883: change eeprom file name
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 20:06:21 +00:00
acinonyx
7d27a0b34d [x86] Disable by default padding of images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 17:54:07 +00:00
acinonyx
4916a0ea0e [x86] Allow gzipping of squashfs images with padded jffs2 partition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 17:54:04 +00:00
acinonyx
05c64b9247 [x86] GZip only ext4 and padded images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 17:54:01 +00:00
acinonyx
8176b71781 [x86] Make gzipping of images configurable via menuconfig
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 17:53:57 +00:00
juhosg
a0ef5265a1 ar71xx: remove duplicated define from the D-Link profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30577 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 09:03:27 +00:00
juhosg
50f7b22bd7 ramips: select HW_HAS_PCI on per-board basis
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 08:17:54 +00:00
juhosg
9e8e8b51d6 ramips: rt3883: remove a stray character from rt3883.h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 08:17:53 +00:00
juhosg
d81767c119 ramips: rt288x: don't register the PCI controller on each board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 08:17:52 +00:00
juhosg
013dc5a5d6 ramips: raeth: separate ring allocation and setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 08:17:50 +00:00
juhosg
5279a11d68 generic: add SND_PPC symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:51:44 +00:00
cshore
10724eda20 [ar71xx] Add Ubiquiti UniFi Profile; It's an AP without USB so don't include USB drivers by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:45:28 +00:00
cshore
5e4fce2233 [ar71xx] d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:38:33 +00:00
cshore
d24315ad26 [ar71xx] Fix partitions for Cameo-based boards; kernel 3.2 is bigger
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:29:26 +00:00
cshore
1a609bdce0 [ar71xx] image: For Cameo-based board fix adding mtd layout to kernel commandline)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:24:45 +00:00
jow
6a43915f2b linux 3.2: missing generic symbols
These symbols are dependent on CONFIG_PCI being enabled.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 23:37:47 +00:00
juhosg
6660855cb6 ramips: rt288x: fix PCI resource conflict
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 21:19:02 +00:00
florian
5ad3941a70 [ramips] correct PCI IO/Mem resource swapping
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 21:13:21 +00:00
florian
62c0190fa5 [ramips] add Ralink V11ST-FE board support
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 21:13:11 +00:00
juhosg
43d6f57e67 ramips: raeth: add a helper function for skb allocation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 18:33:42 +00:00
juhosg
c99c1bd913 ramips: raeth: use netdev_alloc_skb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 18:33:41 +00:00
juhosg
0564ef75aa ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures
This helps GCC to generare more efficient code.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 18:33:40 +00:00
juhosg
eaae1ec1de ramips: raeth: use 're' instead of 'priv' everywhere
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 18:33:38 +00:00
juhosg
d0794e0d35 ramips: raeth: force link down in ramips_phy_stop
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 13:47:52 +00:00
juhosg
815334db9c ramips: raeth: serialize ramips_link_adjust calls
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 13:47:50 +00:00
juhosg
d214321c8c ramips: raeth: add PHYLIB support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 06:47:12 +00:00
blogic
ca06b03a8e linux-atm: update solos-pci driver to upstream
Fixes for the solos-pci driver.

- Corrects calculation of headroom for padding.
- Removes pointless debug messages.
- Expose Bis A and Bis M annex capabilities.
- Expose hardware revision.

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 20:11:24 +00:00
blogic
12ee6100a2 linux-atm: headroom/padding fixes
Submitted upstream to netdev by Chas Williams on linux-atm.

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 20:11:22 +00:00
blogic
6aa1eddee7 [lantiq] generate uboot environment data in target
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 19:07:11 +00:00
blogic
f1215ac7aa [lantiq] fix compile error in previous commit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 19:07:05 +00:00
blogic
61b8a7cdc6 [lantiq] Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:48:04 +00:00
juhosg
d54a0c39e1 ramips: extract eeprom for the PCIe wlan module on the RT-N56U
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:45 +00:00
juhosg
073aa05f36 ramips: rt3883: enable PCI on the RT-N56U board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:44 +00:00
juhosg
0dad89e259 ramips: rt3883: add PCI support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:42 +00:00
juhosg
34acde8e5f ramips: rt3883: sync 2.6.39 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:41 +00:00
juhosg
5775cc2b9c ramips: use SoC specific irq.h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:40 +00:00
blogic
13595a7a28 [lantiq] fixes irq locking in ethernet driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:58 +00:00
blogic
d4d4e1aa21 [lantiq] fixes gpio_export patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:57 +00:00
blogic
f8d8046b51 [ltq-dsl] add annex selection support to ltq_dsl package
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:49 +00:00
juhosg
3c97dc485a ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 17:11:58 +00:00
juhosg
a433c026e5 ar71xx: add model detection for TL-WR842N/ND
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 17:11:57 +00:00
florian
8ac28fce23 [malta] update to 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 16:05:30 +00:00
florian
3e65a7b3dd [ar7] fix titan gpio register size
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 16:05:27 +00:00
juhosg
e95d1bebf7 ramips: rt3883: update package list in the default profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:05 +00:00
juhosg
2223374185 ramips: add preliminary support for the Asus RT-N56U board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:04 +00:00
juhosg
10a983eea1 ramips: raeth: enable MDIO code for RT3883
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:03 +00:00
juhosg
07c8d27309 ramips: add preliminary support for the RT3662/RT3883 SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:17:59 +00:00
florian
17d0a31e9d [malta] add support for 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 12:36:34 +00:00
hauke
adf8b5a51f brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 22:41:20 +00:00
hauke
e1a53dd6b0 brcm47xx: activate config bug to show warnings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 22:40:01 +00:00
juhosg
71da0d9534 ramips: use GENERIC_{4,8}M image template for WR5123GN
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30483 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 18:04:47 +00:00
juhosg
85b1ee0e18 ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 18:04:46 +00:00
hauke
1b56ff8998 brcm47xx: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 16:45:27 +00:00
hauke
6d7798dc01 brcm47xx: update usb driver for brcm47xx.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 16:38:10 +00:00
juhosg
dd584f3173 ramips: add initial support for 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:14 +00:00
juhosg
c9a5f3f810 ramips: include 'linux/module.h' in the ramips_spi driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:13 +00:00
juhosg
4c24144f1f ramips: rt288x: remove per-board physmap_flash_data instances
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:12 +00:00
juhosg
40c07f37d9 ramips: rt305x: remove per-board physmap_flash_data instances
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:10 +00:00
kaloz
9701922238 [cns3xxx]: enable another l2 cache errate on newer kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 11:22:08 +00:00
juhosg
129f9cacb9 ramips: load gpio-polled keys module
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 20:37:34 +00:00
juhosg
e24fe32095 ramips: remove yet another CONFIG_MTD_PARTITION ifdef
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 19:37:11 +00:00
juhosg
d33e1ea7fd ramips: use gpio-keys-polled instead of gpio-buttons
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 19:37:06 +00:00
kaloz
1e4941a025 [generic/3.3]: add some missing symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 18:38:28 +00:00
juhosg
baa5c31303 ramips: add MIPS platform file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 18:16:11 +00:00
juhosg
8aed6bf98c generic/2.6.39: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 18:16:08 +00:00
kaloz
06d33a010d [generic/3.3]: refresh patches to -rc3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 17:43:06 +00:00
juhosg
a6fcd662b4 ramips: add MDIO bus support for RT288X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 16:49:56 +00:00
kaloz
c6114b60db [cns3xxx]: rename 3.1 patches directory as it will be used for newer kernels as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:59:23 +00:00
kaloz
63815e7b5d [cns3xxx]: rename 2.6.39 patches directory
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:58:14 +00:00
juhosg
3613a73356 ramips: fix Belkin F5D8235-v2 VLAN setup
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:31:18 +00:00
juhosg
3120faed8b ramips: raeth: make debugging messages configurable
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:10 +00:00
juhosg
ad0b8c49bf ramips: raeth: use device pointer in DMA API calls
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30449 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:08 +00:00
juhosg
5b41176cdc ramips: raeth: add netdev pointer to private structure
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:06 +00:00
juhosg
1e38789510 ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:05 +00:00
juhosg
9b2ee01ff5 ramips: raeth: unmap rx DMA address in ramips_cleanup_dma
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:04 +00:00
juhosg
606588b4e9 ramips: raeth: add rx_dma array to store the DMA address of the rx packets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:02 +00:00
juhosg
bbc71f5154 ramips: raeth: use dma_addr_t for the descriptors
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:01 +00:00
juhosg
cce4c079c4 ramips: raeth: unmap DMA memory when a packet is received
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:56 +00:00
juhosg
cd69289b3e ramips: raeth: add a temporary pktlen variable
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:55 +00:00
juhosg
0e485dd80d ramips: raeth: protect macro parameters
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:50 +00:00
juhosg
202c4f386c ramips: raeth: indicate dropped packets in stats
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:49 +00:00
juhosg
b10ad5f4e0 ramips: raeth: use the NUM_TX_DESC for the tx_skb array
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:47 +00:00
juhosg
f9626b56d5 ramips: use uncached address in detect_mem_size
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:45 +00:00
juhosg
a88c8014e5 ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30437 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:43 +00:00
juhosg
2a62a21658 ramips: rt288x: remove CONFIG_MTD_PARTITION ifdefery from machine files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:41 +00:00
juhosg
21cf4e76e0 ramips: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:40 +00:00
juhosg
7a5c327fcf ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN
This patch adds support for the Accton WR6202 Mini 3G broadband router.
Full details for this device are available at
http://www.awbnetworks.com/products03.php?Fullkey=19.

This device is identical to the SMCWBR11S-3GN:
http://www.smc-asia.com/products03.php?Fullkey=210

It's also worth noting that this board has a GPIO line to control the
power to the USB port.

[juhosg:
 - fix checkpatch warnings,
 - reorder Kconfig entry,
 - merge the sysupgrade patch,
 - add GPL header]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:36 +00:00
juhosg
d69d16fbbd ramips: rt305x: merge duplicated mac address setup
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:34 +00:00
juhosg
2cc897979d ramips: rt305x: add profile for the Belkin f5d8235v2
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:11:32 +00:00
hauke
2139db24ad brcm47xx: print the chip id and rev found by ssb and bcma
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30428 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 22:42:43 +00:00
juhosg
5d13bee59c ar71xx: zero partition parser data in m25p80
Ths fixes parsing of RedBoot partitions.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30427 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 20:19:06 +00:00
juhosg
3218c675a1 ramips: fix compiler warning in prom.c
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30424 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 17:38:46 +00:00
hauke
d4a8a448fa brcm47xx: update bcm5354 support patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30423 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 17:22:26 +00:00
juhosg
314c3a2a09 ar71xx: fix platform description
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30419 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 15:27:49 +00:00
juhosg
548962afd2 generic: fix yaffs2 build warnings on 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30418 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 15:21:43 +00:00
juhosg
ee8624ffde ar71xx: ag71xx: add BQL support
It will be usable only from linux-3.3.

Based on a patch by Dave Taht <dave.taht@bufferbloat.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30417 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 14:56:47 +00:00
juhosg
2ffafb14db ar71xx: add dummy DQL helper functions for 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30416 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 14:56:44 +00:00
juhosg
33ec8951f8 ar71xx: add preliminary support for 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 11:53:56 +00:00
nbd
d2514fe7ac ar71xx: disable DDR flush for ethernet on AR934x, it is no longer necessary
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 11:46:37 +00:00
nbd
f243888497 ar71xx: fix db120 board detection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 11:46:31 +00:00
juhosg
1d05b280c9 ar71xx: allow to build ag71xx w/o PCI support enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 11:46:10 +00:00
juhosg
8940cbc303 ar71xx: merge 3.2 fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 08:19:33 +00:00
juhosg
d9077e15ae ar71xx: merge files-3.2 to files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 08:19:31 +00:00
juhosg
a25bc14378 ar71xx: nuke 2.6.39 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 08:19:28 +00:00
juhosg
8fbe7bf211 ar71xx: switch to 3.2.5
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 08:19:27 +00:00
juhosg
7666a203c2 ar71xx: refresh 3.2 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 08:19:25 +00:00
juhosg
0fc12e3d4f kernel: update linux 3.2 to 3.2.5
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 08:19:23 +00:00
juhosg
821bbd90e1 ar71xx: 3.2: remove stray semicolons from the PCI fixup patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-09 21:19:57 +00:00
nbd
3ca45835c8 ar71xx: fix ar934x usb reset handling on 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30399 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-09 20:39:41 +00:00
juhosg
d038b562d6 generic: fix kexec build error for MIPS with gcc-4.6-linaro
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-09 14:06:44 +00:00
juhosg
5e02263a06 generic: 3.3: add missing config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-09 08:07:52 +00:00
juhosg
f48c3fb212 generic: 3.3: fix yaffs2 build error
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30392 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-09 08:07:50 +00:00
juhosg
808eca9375 ar71xx: 3.2: get rid of an unused variable in ath79_spi.c
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-08 20:47:58 +00:00
juhosg
be2b898a91 ar71xx: 3.2: fix AHB clock name in rb4xx_spi
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-08 20:47:56 +00:00
juhosg
40424a97d2 generic: fix yaffs2 build error on 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-08 20:47:54 +00:00
florian
502d6255c8 [realview] add more missing config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30386 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-08 17:35:40 +00:00
juhosg
d87e44f83c ar71xx: add profile and build image for the TEW-673GRU board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30377 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-08 16:26:27 +00:00
juhosg
b99e4f9ccd ar71xx: add support for the TRENDNet TEW-673GRU board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30376 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-08 16:26:25 +00:00
jow
cfa5873fee [avr32] select GENERIC_ATOMIC64 implementation to fix xfs related build errors
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30371 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-08 10:34:21 +00:00
kaloz
69a0392bd9 [omap4]: add audio and display features
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-08 10:21:48 +00:00
jow
4cca99b95f 8139cp: backport patches to make driver stable again
List of patches that Jo-Philipp groveled out of git.

Redux: defuzzed.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30366 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-07 21:56:51 +00:00
acinonyx
c7ddcfd108 [x86] alix2, geos: Adjust CFLAGS
Clone of CFLAGS change from r30013 into Geos and Alix platforms.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-07 13:00:47 +00:00
nbd
6c242e52a8 kernel: add a recent upstream commit (post-3.3) to the ssb update patch, required for the next mac80211 update
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-07 11:28:06 +00:00
acinonyx
c34ae937e0 [x86] generic: Enable HPET, HID and AT keyboard support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-05 17:56:04 +00:00
acinonyx
a917102339 [x86] generic: Add missing and remove unused config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-04 20:45:17 +00:00
jogo
9a987b468a brcm63xx: add support for linux 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-04 10:17:27 +00:00
jogo
0054748514 kernel: fix netfilter layer7 compilation in 3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-04 10:17:14 +00:00
jogo
f4e4e8cad9 x86: make alix platform patch apply to 3.3
Based on a patch from Philip Prindeville.

While at it, also refresh the patches.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30025 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-03 20:17:00 +00:00
jow
67afb34982 [x86] disable additional PATA drivers in global 3.2 and 3.3 config, remove redundant symbols from alix2 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30024 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-03 19:47:55 +00:00
jow
eba1d3106d [PATCHv2 1/1] x86: trivial -- add missing CONFIG_GEOS symbol to top-level
So that builds don't stall in x86 prompting for this symbol.
[From Philip Prindeville, via http://patchwork.openwrt.org/patch/1828/]


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30023 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-03 19:21:41 +00:00
jow
7b270e443a [PATCH 1/1] geos: backport driver from linux-next to 3.2 and 3.3
The Geos driver is in linux-next and will be out in 3.4. It builds fine against 3.2.2 and 3.3-rc2.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-03 18:16:27 +00:00
jow
a2d95d4896 [PATCHv2 1/1] net5501: backport drivers from linux-next
Backport net5501 platform driver from 3.4.
Remove vestiges of old (pre-2.6.30) leds-net5501.c driver.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-03 18:14:02 +00:00
jow
cea253527a [PATCH 1/1] x86: move additional oddball PATA drivers
These should only be enabled in the generic image, as they bloat all of the other targets.
Also add symbols for NET5501, ALIX, and GEOS which were added backported to 3.2 and 3.3.
Restore PC speaker to Geos target.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-03 18:02:57 +00:00
jow
7e197aeecc [x86] net5501: adjust CFLAGS and package selection (#10893)
This patches the CFLAGS for Geode LX CPUs for 4.3 and new GGC versions. This creates more compatible code and allowed me to boot my system first time with no troubles. Also, the missing kmod is added in. 


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-03 14:19:29 +00:00
nbd
a5e6e41fc3 ar71xx: add usb on the pb92 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-03 09:44:51 +00:00
jogo
752da5903f x86: add 3.3 generic symbols
Copy x86/config-3.2 to x86/config-3.3 and add additional symbols (for 3.3-rc2).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 21:01:59 +00:00
jow
f7a67f2173 [PATCH 1/1] alix2: backport platform driver updates from linux-next
Add patches to x86/patches-3.2 and x86/patches-3.3 (update will appear in 3.4).
[Patch from Philipp Prindeville, via  http://patchwork.openwrt.org/patch/1817/]


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 19:26:32 +00:00
jow
99a3240251 [x86] alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 19:11:52 +00:00
jow
f637f45e67 [x86] alix2, goes, net5501: clean up default packages
Remove packages which are dependencies of other packages
Remove packages which are part of the default package list
Remove DSL specific packages from net5501
Remove bridge package, we use the busybox applet
Replace hostapd with wpad


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 19:06:22 +00:00
jow
9d45ed8b35 [x86] alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 19:00:40 +00:00
jow
0499d64f3d [x86] geos: add missing files from previous commit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 18:59:51 +00:00
jow
76dfd53de0 [PATCH 2/2] geos: backport Geos driver from linux-next
Backport of linux-next driver.
Driver adds support for LEDS and S/W button.
Add hotplug script for button actions.
Add Openwrt system config for LEDS triggers.
Add updated kernel .config for 3.2 symbols.
[Patch from Philipp Prindeville, via  http://patchwork.openwrt.org/patch/1816/]


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 18:58:20 +00:00
jow
77840b96be [PATCH 1/2] geos: cleanup GPIO driver name
In 3.1, the old drivers/char/ entry for the CS5535 GPIO driver went obsolete.
Make Geos use a recent kernel and remove this ambiguity.
[Patch from Philipp Prindeville, via  http://patchwork.openwrt.org/patch/1815/]


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 18:44:35 +00:00
jow
77a6336d85 [PATCH] net5501: correct net5501 h/w configuration
Bump to version 3.2.
Simplify and correct kernel config (based on x86/config-3.2).
Designate eth0 as wan interface, and bridge eth1/eth2/eth3.
Add heartbeat LED trigger.
Use correct CS5535 GPIO driver.
Use correct USB drivers (OHCI not UHCI).
Add MSR and HW clock support.
Add GPIO mask definition.
Add correct SATA drivers.
Add LED triggers.
[Patch from Philipp Prindeville, via  http://patchwork.openwrt.org/patch/1802/]


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 18:41:10 +00:00
jogo
75d051e29d kernel: add preliminary support for linux 3.3
Based on 3.3-rc2

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 08:23:54 +00:00
jow
2efef569b8 [PATCH] alix2: correct h/w configuration
Bump to version 3.2.
Simplify and correct kernel config (based on x86/config-3.2).
Drop obsolete CS5535 GPIO driver.

[Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1804/]


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-01 15:31:23 +00:00
juhosg
efe78d1eeb ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 20:49:34 +00:00
juhosg
61fe64fa9d ar71xx: merge DIR-600 A1 and DIR-615 E4 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:37:29 +00:00
juhosg
8be0cce7cc ar71xx: fix ethernet LEDs on the DIR-600-A1 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:37:24 +00:00
juhosg
01af86f6ed ar71xx: unify LED names on D-Link boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:37:15 +00:00
juhosg
65ca4389f1 ar71xx: support for D-LINK DIR-615 rev. E4
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.

It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.

[juhosg: add 3.2 support]

Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:37:09 +00:00
juhosg
4bc970ba4f ar71xx: add support for TP-Link TL-MR11U
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.

Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade

[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]

Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:37:01 +00:00
juhosg
796a085cac ar71xx: compress kernel binaries in Image/Prepare stage
The lzma compressed kernel is used by one of the loaders.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:36:54 +00:00
juhosg
41e9c172ba ar71xx: use dynamically allocated partitions in wrt160nl_part
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:36:51 +00:00
juhosg
b623047424 ramips: change vlan_config for the ALFA W502U board
This change moves the WAN port into a separate VLAN.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:34:10 +00:00
jogo
06d197404b kernel: update linux 3.2 to 3.2.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29967 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 09:44:00 +00:00
jogo
e21718ae44 kernel: update linux 3.1 to 3.1.10
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 09:43:57 +00:00
jogo
4521add75d kernel: update linux 3.0 to 3.0.18
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 09:43:53 +00:00
florian
25bc7cfae8 [brcm63xx] build 96348R images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-30 21:12:32 +00:00
florian
6baeb520da [brcm63xx] remove support for 2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-30 21:12:28 +00:00
florian
283043998c [brcm63xx] bump to 3.0.17
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-30 21:12:25 +00:00
florian
4a2187358a [au1000] add missing config symbols
Thanks KanjiMonster

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-30 10:53:20 +00:00
florian
55ef51a400 [kernel] fix gpiommc build failure with 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-30 10:53:16 +00:00
jow
4181b7c622 [x86] create a config-3.2 for upcoming changes, rebase config-default to 2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-30 02:13:37 +00:00
florian
581e492dd6 [ep93xx] add default and Sim.One profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-29 15:00:36 +00:00
florian
658e7e8470 [ep93xx] add 3.2 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29941 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-29 15:00:33 +00:00
florian
9c597f0c30 [kernel] add another 3.2 framebuffer symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-29 15:00:29 +00:00
florian
7b321c6ac4 [au1000] add support for 3.2 kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-29 15:00:25 +00:00
florian
ebbec463c7 [ar71xx] add support for the Atheros AP113 reference board
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-28 13:19:49 +00:00
florian
ccc47d58db [ar71xx] refresh 3.2 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-28 13:19:43 +00:00
hauke
8ba3ef273d brcm47xx: add fix for cardbus host controller
These devices have two devices on the bus, the host controller itself and the device.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-27 20:10:51 +00:00
juhosg
8fcb797999 ar71xx: use 64k block size for WZR-HP-AG300H
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-27 10:42:41 +00:00
juhosg
406018ae4d ar71xx: fix sysupgrade image building of atheros boards after r29899
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-27 07:51:09 +00:00
juhosg
72a8cff4c1 ar71xx: create the temporary directory before building initramfs images
Thanks to Florian for reporting.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 21:28:34 +00:00
juhosg
b8f0111122 ar71xx: create a profile and build images for Compex WPE72
[juhosg: remove ath9k from the the profile package list, build WPE72
image with the Default profile as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 17:01:44 +00:00
juhosg
af63c6a4f8 ar71xx: add support for Compex WPE72/WPE72NX
This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.

[juhosg: add support to 3.2 as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 17:01:41 +00:00
juhosg
537832ae56 generic: add WPE72 ID to myloader.h
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 17:01:38 +00:00
juhosg
57ffcdaccd ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 10:44:23 +00:00
juhosg
0bca69f7bf ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour
This patch fixes the board detection of the TL-MR3020.

The LED behaviour has also been modified:
* The WPS LED is the diag LED now.
* A netdev trigger for the LAN LED has been added.

The profile of the TL-MR3020 has been updated because the needed package
"kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev
trigger for the 3G/USB LED.

[juhosg: the board name changes has been removed, and the kernel files
has been changed instead.]

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-25 07:44:45 +00:00
juhosg
f662489883 ar71xx: TL-MR3020: fix GPIO polarity for button and switch
This patch fixes the GPIO polarity for the button and the sliding
switch. The buttons are not active low. "Pressed" and "Released"
events are wrong without the patch.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-25 07:44:43 +00:00
juhosg
3f391b2e19 ar71xx: use the lzma loader on the Planex boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 20:12:10 +00:00
juhosg
a805739180 ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 20:12:08 +00:00
juhosg
f2dce5bf3d ar71xx: fix the AP/Router LED definitons on MZK-W300NH
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 18:40:38 +00:00
juhosg
280177d53b ar71xx: preset WLAN LED config on MZK-W300NH
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 18:40:36 +00:00
juhosg
c8f5aae9fd ar71xx: remove hardcoded MTD layout from planex files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 18:40:34 +00:00
juhosg
8b3aaef2dd ar71xx: pass mtdlayout to Planex boards via command line
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 18:40:33 +00:00
juhosg
7fe033da7a ar71xx: remove an unused header file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 18:40:31 +00:00
juhosg
f57ff12b98 ramips: generate sysupgrade image for the ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 11:48:48 +00:00
juhosg
64435afc83 ramips: add user-space support for ALL0256N
This adds uci-defaults and sysupgrade support for the ALL0256N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 11:48:47 +00:00
juhosg
ad3e5bb078 ramips: add kernel support for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 11:48:45 +00:00
juhosg
3ea7ce5200 ar71xx: nuke fs_all variable in image/Makefile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 09:47:25 +00:00
juhosg
6c5c90403f ar71xx: create interim kernel files in a separate dir
This reduces the size of the ImageBuilder tarball a lot.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 09:47:23 +00:00
juhosg
50e8ce781c ar71xx: prebuild all loaders in Image/Prepare stage
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 09:47:22 +00:00
juhosg
20d9fd2c16 ramips: scripts updates
In this patch:

* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
  defined as usb led earlier, just in wrong place) - it should have
  router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
  default and the led is hidden also but if you are going to solder
  the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-23 10:23:32 +00:00
juhosg
71feb1ed02 ar71xx: 3.2: fix build errors if PCI is not enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29870 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-23 08:52:21 +00:00
juhosg
be456a1234 ar71xx: fix compiler warning if PCI is not enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-23 08:52:18 +00:00
juhosg
e0b80e41eb ar71xx: add initial support for 3.2
Tested on the following boards:
  ALFA AP96
  TL-MR3220 v1
  TL-WR1043ND v1
  TL-WR2543ND v1
  TL-WR703N v1
  TL-WR741ND v1
  TL-WR741ND v4
  WNDR3700 v1
  WZR-HP-G300NH

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29868 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 22:38:19 +00:00
juhosg
22b99f32a1 ar71xx: move arch specific files to files-2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 22:38:11 +00:00
juhosg
b66dee35c3 ar71xx: build ALFA AP96 images with default profile as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29866 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 22:33:15 +00:00
juhosg
99d51f00d6 generic: 3.2: allow to build myloader mtd parser for ATH79
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 18:43:39 +00:00
juhosg
7a77552c35 generic: allow to build myloader mtd parser for 3.2+
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29858 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 18:36:49 +00:00
juhosg
608335c636 ramips fix f5d8235-v1 diag LED support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29857 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 18:11:39 +00:00
juhosg
acc9c3cbf5 ar71xx: wrt160nl_part: include module.h and fix compiler warnings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 17:55:38 +00:00
juhosg
681c0cf274 ar71xx: tplinkpart: include module.h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 17:55:36 +00:00
juhosg
523cf1638c ar71xx: rename vsc7385 spi driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29853 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:57 +00:00
juhosg
e3c5dcc5ee ar71xx: rename ap81 spi driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:56 +00:00
juhosg
047bbb085a ar71xx: rename rb4xx spi drivers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:54 +00:00
juhosg
d73151f6d4 ar71xx: rename the nxp_74hc153 driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:52 +00:00
juhosg
3746d2ed29 ar71xx: change board id of the UniFi board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:50 +00:00
juhosg
fa5eb96b17 ar71xx: include linux/module.h in the micrel phy driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:49 +00:00
juhosg
a40700d373 ramips: add sysled and sysupgrade to wr512-3gn
Patch from #10035.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:43:23 +00:00
juhosg
e6804feade generic: 3.2: don't disable lockdep for OOT modules
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 09:57:39 +00:00
juhosg
e2bae31171 generic: rtl8366: add rtl8366_smi_write_reg_noack helper
After issuing a soft reset on the RT8366{S,RB}
switch, waiting for the last acknowlegement fails
in rtl8366_smi_write_reg. Add a _noack version of
the function and use that for issuing a soft reset.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-21 22:44:09 +00:00
hauke
6e809dd8f1 brcm47xx: add support for pcie host controller on bcma based SoCs.
This also adds minimal support for the BCMA43224 pcie wireless card.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-21 22:39:20 +00:00
juhosg
1047651f0e ramips: sysupgrade for ESR-9753
This patch add sysupgrade for Engenius ESR-9753

Signed-off-by: Artur Wronowski <arteqw@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-20 10:49:26 +00:00
jogo
2ea3aaed73 kernel: fix OCF for linux 3.2
Add skb_frag_page from 3.2 to OCF for 3.1 and earlier and use it.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-19 19:51:54 +00:00
jow
d5a63cc211 [adm5120] add missing kernel symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-19 01:57:22 +00:00
jow
429edf765e Make the grub timeout configurable on x86 targets
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29786 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-19 01:14:45 +00:00
jow
62b26e2933 x86/config-3.2: add linux-3.2 symbols for x86
The following symbols are missing for x86, in sorted order.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-19 00:31:39 +00:00
florian
60e384d276 [kernel] fix thinko in 102-ehci_hcd_ignore_oc patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29773 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-18 07:56:02 +00:00
blogic
220fd247bc [lantiq] gigaset 76x
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-17 12:10:35 +00:00
blogic
03810204dc ramips: Rework ramips_eth to not require irqsave locking anymore
Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.

This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-17 11:23:11 +00:00
hauke
079a3384c5 brcm47xx: add support for kernel 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-15 21:18:34 +00:00
hauke
da271c7332 brcm47xx: run kernel_oldconfig
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-15 14:53:32 +00:00
kaloz
6ca687282b [target/omap4]: add support for OMAP4 based boards, starting with the PandaBoard
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-14 23:02:56 +00:00
kaloz
399f89c7fc [generic/3.2]: fixup arm xz support with recent changes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-14 22:55:04 +00:00
kaloz
e20c35f54d [generic/3.2]: add missing symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-14 22:53:28 +00:00
nbd
2b1f20d73e kernel: disable bridge igmp snooping in 3.2 as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29747 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-14 14:57:03 +00:00
nbd
10b3a6c001 kernel: disable bridge igmp snooping by default to avoid multicast issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29744 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-14 13:50:25 +00:00
jogo
4773b5ef82 kernel: ppc40x: ppc44x: add missing kernel config symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29742 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-14 12:04:17 +00:00
hauke
01cb3619d3 brcm47xx: update usb driver
Add workarround for BCM5357 and BCM4749.

This patch contains the following fixes from George Kashperko:
* separate subroutines for controller initialization workarounds -
   following CodingStyle recommendations;
* __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG;
* fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being
   kmalloc'ed is never freed anywhere while platform_device_add_resources
   will kmemdup resources right away;
* fix compilation error in ssb_hcd_resume - it will fail as soon as
   CONFIG_PM is selected.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 20:11:23 +00:00
jow
3651d1c332 [generic] rtl8366: fix rtl8366_smi_detect() after r29677
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29732 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 19:17:58 +00:00
jogo
504d88e2ae brcm63xx: add support for linux 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29731 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 14:59:50 +00:00
jogo
04e6d374b6 kernel: add support for linux 3.2.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 14:55:07 +00:00
jogo
d828d77b46 kernel: backport overlayfs v11 to 3.0 and 2.6.39
Should fix whiteout issues and missing files when using extroot.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 14:42:53 +00:00
jogo
f1f885a356 kernel: update linux 3.1 to 3.1.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 14:38:28 +00:00
jogo
6b4b162100 kernel: update linux 3.0 to 3.0.17
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 14:10:44 +00:00
nbd
63c3f72940 ar8216: use vlan configuration for connecting ports (forced to be untagged) even with vlan_enable=0, but keep them isolated before the switch has been configured
this makes enable_vlan=0 practical for vlan passthrough

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-12 10:15:11 +00:00
nbd
25b268205a ar8216: do not strip vlan tags when running with vlan_enable=0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-12 10:15:08 +00:00
juhosg
1b3efb3352 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 18:00:50 +00:00
cshore
efab389042 [brcm63xx] Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 13:47:48 +00:00
juhosg
74844fd50b ar71xx: disable ath79 in order to get rid of Kconfig warnings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:19 +00:00
juhosg
6734a832bc ar71xx: pb44_spi: add shutdown handler
This allows to access the flash from a kexec'd kernel.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:18 +00:00
juhosg
7bb349bc59 ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:17 +00:00
juhosg
ddfc10f668 ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:15 +00:00
juhosg
3e74da5245 ar71xx: ar71xx_spi: add shutdown handler
This allows to access the flash from a kexec'd kernel.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:14 +00:00
juhosg
8e61fd2405 ar71xx: ar71xx_spi: save and restore regs from probe/remove
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:13 +00:00
juhosg
302dc3a936 ar71xx: ar71xx_wdt: add shutdown handler
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:11 +00:00
juhosg
0dad098602 ar71xx: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:43 +00:00
juhosg
e1a6e8b311 ar71xx: add a profile and build images for the TL-WR2543N/ND
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:42 +00:00
juhosg
19be413163 ar71xx: add initial support for the TL-WR2543N/ND board
The WLAN LEDs are not working yet.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:35 +00:00
juhosg
3e84f7b9f1 ar71xx: allow to specify max read size for m25p80
Reading from the flash chip on the TL-WR2543ND seems buggy.
If the SPI flash driver tries to read too much data in one
SPI transfer, the flash chip returns bogus values. This can
be caused by a buggy flash chip on my board, or it can
be a bug in our SPI driver.

Add a workaround to the m25p80 driver until I find out the
root cause of the problem. The patch allows to specify the
maximum numner of bytes which can be read safely withint
one SPI transfer.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:33 +00:00
juhosg
55772106df generic: add driver for the RTL8367R/M switches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:31 +00:00
juhosg
d80f2ee46b generic: rtl8366: preparing for RTL8367 support
* make clock delay configurable
* make read,write commands configurable
* use u16 for member and untag fields

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29677 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:30 +00:00
juhosg
d43b4effd9 generic: rtl8366_smi: add timeout message
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29676 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:25 +00:00
juhosg
54bc3d42c4 ar71xx: local mac support on the wndr3700
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 17:24:44 +00:00
juhosg
c2243d1fb9 generic: improve MIPS kexec support
It is based on patches from the linux-longsoon-community git tree:
http://dev.lemote.com/cgit/linux-loongson-community.git/

Now the kernel can use the command line parameter from kexec-tools.

Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped
before executing the new kernel). Compile tested with lantiq (3.1.4)
and brcm47xx (3.0.12).

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 16:29:16 +00:00
juhosg
66663e2809 ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06 15:54:59 +00:00
juhosg
01c809eff1 ar71xx: add support for Redwave RW2458N
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06 07:20:59 +00:00
juhosg
4c93839943 ar71xx: fix RB-750 network configuration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06 07:20:54 +00:00
juhosg
c63a29ee7f ar71xx: fix sections mismatch warnings in the nand drivers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-05 18:08:33 +00:00
juhosg
978d04d680 ar71xx: fix LED configuration on the RB-750
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-05 18:08:28 +00:00
juhosg
6c8dc3bd72 ar71xx: create profile and build image for the ALFA AP96 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 21:13:57 +00:00
juhosg
b8e2e95b70 ar71xx: add inital support for the ALFA Network AP96 board
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 21:13:54 +00:00
juhosg
3d14a486be ar71xx: specify console kernel parameter for the Compex boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:59 +00:00
juhosg
86c95a9481 ar71xx: allow to use the command line hack on compex devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:58 +00:00
juhosg
bf238aa8e9 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:57 +00:00
juhosg
c96ab77e4e ar71xx: show correct model name on TL-WA701N/ND boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:55 +00:00
juhosg
06483eda3d ar71xx: add profile and build image for the TL-WA701N/ND boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:54 +00:00
juhosg
342be7abf7 ar71xx: fix network configuration for the TL-WA901N/ND boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:52 +00:00
juhosg
9229d15c65 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:50 +00:00
juhosg
28c6546050 ar71xx: add default LED configuration for the TL-MR3020
Also use the system LED for diagnostic.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:49 +00:00
juhosg
2b1cf2b32c ar71xx: add support for TP-Link TL-MR3020
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:47 +00:00
juhosg
7e491e9a72 ar71xx: use the new om-watchdog package for OM2P
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:41 +00:00
jow
8b51caf859 [netfilter] remove current RTSP support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 00:29:29 +00:00
jow
8f76f46fa3 [generic] backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802)
commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals)
forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a
packet (from another flow) was dropped, leading to various problems.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-03 23:08:15 +00:00
juhosg
ced006ab54 ar71xx: add profile and build factory image for the Hornet-UB board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:29 +00:00
juhosg
adfe1a4686 ar71xx: build images for the ALFA Network N2/N5 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:28 +00:00
juhosg
fd1bdc7c45 ar71xx: add support for the ALFA Network N2/N5 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:25 +00:00
juhosg
a604775f66 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:46 +00:00
juhosg
5a33add62c ar71xx: enable SWCONFIG_LEDS
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:40 +00:00
juhosg
55894a40aa kernel: swconfig: introduce a generic switch LED trigger
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:30 +00:00
juhosg
b042bd4e4d ar71xx: ag71xx: implement get_port_{link,stats} callbacks
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:26 +00:00
juhosg
c400bf085d kernel: swconfig: add get_port_{link,stats} callbacks
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:24 +00:00
juhosg
096af0d2e8 ar71xx: fix LEDs on the WRT400N
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 13:54:11 +00:00
juhosg
c1be681672 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28 08:43:43 +00:00
juhosg
71c649d097 ramips: rt288x: change base address and window size of flash bank 0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28 08:43:36 +00:00
juhosg
0cbcd33f32 ramips: rt305x: add support for the ALFA Networks W502U (R36) board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28 08:43:32 +00:00
juhosg
0d1ced0ac9 ar71xx: enable sysupgrade support for airrouter
Works for me! ;-)

Patch-by: Russell Senior <russell@personaltelco.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27 16:59:43 +00:00
juhosg
2eb905f8ba ar71xx: fix sysupgrade on PB42/PB44 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29613 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27 16:57:01 +00:00
juhosg
66769bfe50 ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27 16:56:30 +00:00
jow
2c7dddc2ce [generic] add missing config symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-25 13:33:18 +00:00
hauke
71a38e2476 brcm47xx: fix usb on more recent bcma based devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 17:21:52 +00:00
juhosg
b95eb02775 ramips: initial support for Sitecom WL-351 v1 002
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:16 +00:00
juhosg
a46cfc6bcc ramips: add support for the Senao/EnGenius ESR-9753 board
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:10 +00:00
juhosg
f3c0d1bebb ramips: define firmware partition for Omnima MiniEMBWiFi
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:05 +00:00
nbd
2ca2cb6c37 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-22 05:43:53 +00:00
jogo
c5ceea4e34 ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
Thanks netprince for reporting and testing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21 19:32:40 +00:00
jow
674429b24f [ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21 01:27:48 +00:00
hauke
84d175a3f2 brcm47xx: remove patch starting adding brcm4716 to ssb
brcm4716 is supported by bcma now we do not need this patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:55:20 +00:00
hauke
9da7868465 brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:39:13 +00:00
hauke
a604d7454c kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:33:03 +00:00
hauke
84ddb1a863 brcm47xx: remove support for kernel 2.6.39
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:26:15 +00:00
nbd
eaf9c95caf ar71xx: add missing wireless led changes for wzr-hp-g300nh2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 09:04:15 +00:00
nbd
cdf64b5cdc ar71xx: add support for the wzr-hp-g300nh2
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-18 22:20:17 +00:00
juhosg
c0f6abcdc6 ar71xx: use 64kraw template on more TP-Link boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-17 18:49:55 +00:00
juhosg
12930c3272 ar71xx: connect GMAC0 to the internal switch on DB120
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:38 +00:00
juhosg
ba50354437 ar71xx: add defines for the AR934X GMAC interface
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:36 +00:00
juhosg
a55b188ebe ar71xx: fix GMAC1 interface speed on the DB120 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:35 +00:00
juhosg
8e8e3fdde7 ar71xx: ag71xx: fix switch port setup for AR934X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:32 +00:00
juhosg
07d1bcb923 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:30 +00:00
juhosg
cb5f456a33 ar71xx: ag71xx: setup switch interface mode on AR934X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:29 +00:00
juhosg
f97a00297e ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:28 +00:00
juhosg
e61b2d1ed9 ar71xx: allow to attach the internal switch for AR934x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:22 +00:00
juhosg
812763d48e ar71xx: introduce ar71xx_switch_data
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:11 +00:00
juhosg
867f0fa967 ar71xx: build images for TL-WR741N/ND v2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:48 +00:00
juhosg
60c6b42122 ar71x: use raw squashfs images for TP-Link boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:46 +00:00