qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-18 23:38:26 +02:00
Code
23,271 Commits 13 Branches 0 Tags 117 MiB
ee96308b09
Commit Graph

9332 Commits

Author SHA1 Message Date
juhosg
681c0cf274 ar71xx: tplinkpart: include module.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29855 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 17:55:36 +00:00
juhosg
523cf1638c ar71xx: rename vsc7385 spi driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29853 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:57 +00:00
juhosg
e3c5dcc5ee ar71xx: rename ap81 spi driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29852 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:56 +00:00
juhosg
047bbb085a ar71xx: rename rb4xx spi drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:54 +00:00
juhosg
d73151f6d4 ar71xx: rename the nxp_74hc153 driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:52 +00:00
juhosg
3746d2ed29 ar71xx: change board id of the UniFi board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:50 +00:00
juhosg
fa5eb96b17 ar71xx: include linux/module.h in the micrel phy driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:49 +00:00
juhosg
a40700d373 ramips: add sysled and sysupgrade to wr512-3gn 
Patch from #10035.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29847 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:43:23 +00:00
juhosg
e6804feade generic: 3.2: don't disable lockdep for OOT modules 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29846 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 09:57:39 +00:00
juhosg
e2bae31171 generic: rtl8366: add rtl8366_smi_write_reg_noack helper 
After issuing a soft reset on the RT8366{S,RB}
switch, waiting for the last acknowlegement fails
in rtl8366_smi_write_reg. Add a _noack version of
the function and use that for issuing a soft reset.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-21 22:44:09 +00:00
hauke
6e809dd8f1 brcm47xx: add support for pcie host controller on bcma based SoCs. 
This also adds minimal support for the BCMA43224 pcie wireless card.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-21 22:39:20 +00:00
juhosg
1047651f0e ramips: sysupgrade for ESR-9753 
This patch add sysupgrade for Engenius ESR-9753

Signed-off-by: Artur Wronowski <arteqw@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29824 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-20 10:49:26 +00:00
jogo
2ea3aaed73 kernel: fix OCF for linux 3.2 
Add skb_frag_page from 3.2 to OCF for 3.1 and earlier and use it.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29818 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-19 19:51:54 +00:00
jow
d5a63cc211 [adm5120] add missing kernel symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29790 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-19 01:57:22 +00:00
jow
429edf765e Make the grub timeout configurable on x86 targets 
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29786 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-19 01:14:45 +00:00
jow
62b26e2933 x86/config-3.2: add linux-3.2 symbols for x86 
The following symbols are missing for x86, in sorted order.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29783 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-19 00:31:39 +00:00
florian
60e384d276 [kernel] fix thinko in 102-ehci_hcd_ignore_oc patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29773 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-18 07:56:02 +00:00
blogic
220fd247bc [lantiq] gigaset 76x 
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29763 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-17 12:10:35 +00:00
blogic
03810204dc ramips: Rework ramips_eth to not require irqsave locking anymore 
Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.

This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29762 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-17 11:23:11 +00:00
hauke
079a3384c5 brcm47xx: add support for kernel 3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29756 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-15 21:18:34 +00:00
hauke
da271c7332 brcm47xx: run kernel_oldconfig 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29755 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-15 14:53:32 +00:00
kaloz
6ca687282b [target/omap4]: add support for OMAP4 based boards, starting with the PandaBoard 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29753 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-14 23:02:56 +00:00
kaloz
399f89c7fc [generic/3.2]: fixup arm xz support with recent changes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29750 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-14 22:55:04 +00:00
kaloz
e20c35f54d [generic/3.2]: add missing symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29749 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-14 22:53:28 +00:00
nbd
2b1f20d73e kernel: disable bridge igmp snooping in 3.2 as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29747 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-14 14:57:03 +00:00
nbd
10b3a6c001 kernel: disable bridge igmp snooping by default to avoid multicast issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29744 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-14 13:50:25 +00:00
jogo
4773b5ef82 kernel: ppc40x: ppc44x: add missing kernel config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29742 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-14 12:04:17 +00:00
hauke
01cb3619d3 brcm47xx: update usb driver 
Add workarround for BCM5357 and BCM4749.

This patch contains the following fixes from George Kashperko:
* separate subroutines for controller initialization workarounds -
   following CodingStyle recommendations;
* __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG;
* fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being
   kmalloc'ed is never freed anywhere while platform_device_add_resources
   will kmemdup resources right away;
* fix compilation error in ssb_hcd_resume - it will fail as soon as
   CONFIG_PM is selected.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29734 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 20:11:23 +00:00
jow
3651d1c332 [generic] rtl8366: fix rtl8366_smi_detect() after r29677 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29732 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 19:17:58 +00:00
jogo
504d88e2ae brcm63xx: add support for linux 3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29731 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 14:59:50 +00:00
jogo
04e6d374b6 kernel: add support for linux 3.2.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29730 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 14:55:07 +00:00
jogo
d828d77b46 kernel: backport overlayfs v11 to 3.0 and 2.6.39 
Should fix whiteout issues and missing files when using extroot.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29727 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 14:42:53 +00:00
jogo
f1f885a356 kernel: update linux 3.1 to 3.1.9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29726 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 14:38:28 +00:00
jogo
6b4b162100 kernel: update linux 3.0 to 3.0.17 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29725 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-13 14:10:44 +00:00
nbd
63c3f72940 ar8216: use vlan configuration for connecting ports (forced to be untagged) even with vlan_enable=0, but keep them isolated before the switch has been configured 
this makes enable_vlan=0 practical for vlan passthrough

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29719 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-12 10:15:11 +00:00
nbd
25b268205a ar8216: do not strip vlan tags when running with vlan_enable=0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29718 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-12 10:15:08 +00:00
juhosg
1b3efb3352 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29713 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 18:00:50 +00:00
cshore
efab389042 [brcm63xx] Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29712 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 13:47:48 +00:00
juhosg
74844fd50b ar71xx: disable ath79 in order to get rid of Kconfig warnings 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29711 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:19 +00:00
juhosg
6734a832bc ar71xx: pb44_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29710 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:18 +00:00
juhosg
7bb349bc59 ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:17 +00:00
juhosg
ddfc10f668 ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29708 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:15 +00:00
juhosg
3e74da5245 ar71xx: ar71xx_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29707 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:14 +00:00
juhosg
8e61fd2405 ar71xx: ar71xx_spi: save and restore regs from probe/remove 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:13 +00:00
juhosg
302dc3a936 ar71xx: ar71xx_wdt: add shutdown handler 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:11 +00:00
juhosg
0dad098602 ar71xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29683 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:43 +00:00
juhosg
e1a6e8b311 ar71xx: add a profile and build images for the TL-WR2543N/ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29682 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:42 +00:00
juhosg
19be413163 ar71xx: add initial support for the TL-WR2543N/ND board 
The WLAN LEDs are not working yet.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:35 +00:00
juhosg
3e84f7b9f1 ar71xx: allow to specify max read size for m25p80 
Reading from the flash chip on the TL-WR2543ND seems buggy.
If the SPI flash driver tries to read too much data in one
SPI transfer, the flash chip returns bogus values. This can
be caused by a buggy flash chip on my board, or it can
be a bug in our SPI driver.

Add a workaround to the m25p80 driver until I find out the
root cause of the problem. The patch allows to specify the
maximum numner of bytes which can be read safely withint
one SPI transfer.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29679 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:33 +00:00
juhosg
55772106df generic: add driver for the RTL8367R/M switches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29678 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:31 +00:00
juhosg
d80f2ee46b generic: rtl8366: preparing for RTL8367 support 
* make clock delay configurable
* make read,write commands configurable
* use u16 for member and untag fields

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29677 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:30 +00:00
juhosg
d43b4effd9 generic: rtl8366_smi: add timeout message 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29676 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:25 +00:00
juhosg
54bc3d42c4 ar71xx: local mac support on the wndr3700 
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29675 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 17:24:44 +00:00
juhosg
c2243d1fb9 generic: improve MIPS kexec support 
It is based on patches from the linux-longsoon-community git tree:
http://dev.lemote.com/cgit/linux-loongson-community.git/

Now the kernel can use the command line parameter from kexec-tools.

Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped
before executing the new kernel). Compile tested with lantiq (3.1.4)
and brcm47xx (3.0.12).

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29674 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 16:29:16 +00:00
juhosg
66663e2809 ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29672 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-06 15:54:59 +00:00
juhosg
01c809eff1 ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-06 07:20:59 +00:00
juhosg
4c93839943 ar71xx: fix RB-750 network configuration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29668 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-06 07:20:54 +00:00
juhosg
c63a29ee7f ar71xx: fix sections mismatch warnings in the nand drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29667 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-05 18:08:33 +00:00
juhosg
978d04d680 ar71xx: fix LED configuration on the RB-750 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29666 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-05 18:08:28 +00:00
juhosg
6c8dc3bd72 ar71xx: create profile and build image for the ALFA AP96 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29663 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 21:13:57 +00:00
juhosg
b8e2e95b70 ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 21:13:54 +00:00
juhosg
3d14a486be ar71xx: specify console kernel parameter for the Compex boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29660 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:59 +00:00
juhosg
86c95a9481 ar71xx: allow to use the command line hack on compex devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29659 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:58 +00:00
juhosg
bf238aa8e9 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:57 +00:00
juhosg
c96ab77e4e ar71xx: show correct model name on TL-WA701N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29657 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:55 +00:00
juhosg
06483eda3d ar71xx: add profile and build image for the TL-WA701N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29656 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:54 +00:00
juhosg
342be7abf7 ar71xx: fix network configuration for the TL-WA901N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29654 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:52 +00:00
juhosg
9229d15c65 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:50 +00:00
juhosg
28c6546050 ar71xx: add default LED configuration for the TL-MR3020 
Also use the system LED for diagnostic.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:49 +00:00
juhosg
2b1cf2b32c ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:47 +00:00
juhosg
7e491e9a72 ar71xx: use the new om-watchdog package for OM2P 
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29648 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:41 +00:00
jow
8b51caf859 [netfilter] remove current RTSP support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29643 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 00:29:29 +00:00
jow
8f76f46fa3 [generic] backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802) 
commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals)
forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a
packet (from another flow) was dropped, leading to various problems.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29642 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-03 23:08:15 +00:00
juhosg
ced006ab54 ar71xx: add profile and build factory image for the Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:29 +00:00
juhosg
adfe1a4686 ar71xx: build images for the ALFA Network N2/N5 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29636 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:28 +00:00
juhosg
fd1bdc7c45 ar71xx: add support for the ALFA Network N2/N5 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:25 +00:00
juhosg
a604775f66 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:46 +00:00
juhosg
5a33add62c ar71xx: enable SWCONFIG_LEDS 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29630 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:40 +00:00
juhosg
55894a40aa kernel: swconfig: introduce a generic switch LED trigger 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29627 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:30 +00:00
juhosg
b042bd4e4d ar71xx: ag71xx: implement get_port_{link,stats} callbacks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:26 +00:00
juhosg
c400bf085d kernel: swconfig: add get_port_{link,stats} callbacks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29625 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:24 +00:00
juhosg
096af0d2e8 ar71xx: fix LEDs on the WRT400N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 13:54:11 +00:00
juhosg
c1be681672 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board 
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29617 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-28 08:43:43 +00:00
juhosg
71c649d097 ramips: rt288x: change base address and window size of flash bank 0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29616 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-28 08:43:36 +00:00
juhosg
0cbcd33f32 ramips: rt305x: add support for the ALFA Networks W502U (R36) board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29615 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-28 08:43:32 +00:00
juhosg
0d1ced0ac9 ar71xx: enable sysupgrade support for airrouter 
Works for me! ;-)

Patch-by: Russell Senior <russell@personaltelco.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29614 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-27 16:59:43 +00:00
juhosg
2eb905f8ba ar71xx: fix sysupgrade on PB42/PB44 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29613 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-27 16:57:01 +00:00
juhosg
66769bfe50 ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-27 16:56:30 +00:00
jow
2c7dddc2ce [generic] add missing config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29610 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-25 13:33:18 +00:00
hauke
71a38e2476 brcm47xx: fix usb on more recent bcma based devices. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29605 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-23 17:21:52 +00:00
juhosg
b95eb02775 ramips: initial support for Sitecom WL-351 v1 002 
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-23 14:27:16 +00:00
juhosg
a46cfc6bcc ramips: add support for the Senao/EnGenius ESR-9753 board 
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-23 14:27:10 +00:00
juhosg
f3c0d1bebb ramips: define firmware partition for Omnima MiniEMBWiFi 
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29602 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-23 14:27:05 +00:00
nbd
2ca2cb6c37 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-22 05:43:53 +00:00
jogo
c5ceea4e34 ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H 
Thanks netprince for reporting and testing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-21 19:32:40 +00:00
jow
674429b24f [ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-21 01:27:48 +00:00
hauke
84d175a3f2 brcm47xx: remove patch starting adding brcm4716 to ssb 
brcm4716 is supported by bcma now we do not need this patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29576 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 23:55:20 +00:00
hauke
9da7868465 brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. 
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29575 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 23:39:13 +00:00
hauke
a604d7454c kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29574 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 23:33:03 +00:00
hauke
84ddb1a863 brcm47xx: remove support for kernel 2.6.39 
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29573 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 23:26:15 +00:00
nbd
eaf9c95caf ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 09:04:15 +00:00
nbd
cdf64b5cdc ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-18 22:20:17 +00:00
juhosg
c0f6abcdc6 ar71xx: use 64kraw template on more TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-17 18:49:55 +00:00
juhosg
12930c3272 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:38 +00:00
juhosg
ba50354437 ar71xx: add defines for the AR934X GMAC interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:36 +00:00
juhosg
a55b188ebe ar71xx: fix GMAC1 interface speed on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:35 +00:00
juhosg
8e8e3fdde7 ar71xx: ag71xx: fix switch port setup for AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:32 +00:00
juhosg
07d1bcb923 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:30 +00:00
juhosg
cb5f456a33 ar71xx: ag71xx: setup switch interface mode on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:29 +00:00
juhosg
f97a00297e ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:28 +00:00
juhosg
e61b2d1ed9 ar71xx: allow to attach the internal switch for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:22 +00:00
juhosg
812763d48e ar71xx: introduce ar71xx_switch_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:11 +00:00
juhosg
867f0fa967 ar71xx: build images for TL-WR741N/ND v2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:48 +00:00
juhosg
60c6b42122 ar71x: use raw squashfs images for TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:46 +00:00
juhosg
6c3fe396cd ar71xx: create a template for using unpadded squashfs images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:45 +00:00
juhosg
f2945360c1 ar71xx: put squash image right after the kernel on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:44 +00:00
juhosg
57705b7a08 ar71xx: tplinkpart: allow to detect JFFS2 as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:40 +00:00
juhosg
08d268c8a7 ar71xx: ag71xx: check PHY IDs before accessing the switch registers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:23 +00:00
juhosg
a82d9221c9 ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:21 +00:00
juhosg
ba116ade9e ar71xx: ag71xx: nuke ar7240sw_init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:20 +00:00
juhosg
803afe6e40 ar71xx: fix mac addresses on jjPlus devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:18 +00:00
juhosg
032d881496 ar71xx: build image for the Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:11 +00:00
juhosg
d8f4833329 ar71xx: add support for ALFA Network's Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:10 +00:00
juhosg
33334db9dc ar71xx: add GPIO function bit defines for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:07 +00:00
juhosg
2b913567e8 ramips: add support for Omnima MiniEMBWiFi board 
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:51:26 +00:00
nbd
5841748e56 ar71xx: fix gpio count for ar7241/ar7242 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:47:24 +00:00
nbd
75bbe95c04 ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:21:42 +00:00
nbd
dcf5cd5fc2 ath9k: add support for registering extra leds connected to the wmac gpio lines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29530 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:21:36 +00:00
juhosg
8b3380fefc ar71xx: get rid of squashfs-4k images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 20:41:24 +00:00
juhosg
05535c2766 generic: disable 'small sector' erase in m25p80 driver 
This fixes the issues with the jffs2 images on various boards. Using
JFFS2 on devices with 4KiB erase sectors is not safe:
http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29521 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 20:41:22 +00:00
nbd
340372534c kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29516 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 15:14:59 +00:00
nbd
e7bf9d2f6d ar71xx: fix wireless led on wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 15:00:43 +00:00
juhosg
17595c4da2 ar71xx: enable AR9341 support at setup.c 
Patch-by: dyq <729650915@qq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 14:59:43 +00:00
juhosg
6caa8876b2 ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 14:59:40 +00:00
nbd
ec66b62afa ar71xx: add gpios and usb for wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29509 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 13:33:44 +00:00
juhosg
1e26277d1e ar71xx: use RedBoot parser on PB44 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29501 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-11 15:52:47 +00:00
blogic
6e7fe5572c [atheros] convert to gpiolib 
Signed-off-by:	karlp@tweak.net.au

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-09 07:52:10 +00:00
juhosg
aa54ff79a0 ar71xx: fix WNDR3x00 factory image generation 
Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs
for the device: field in their DNI tags, not WNDR3700.

This regressed in r29434, which redid WNDR3x00 model detection. The sixth
parameter to Image/Build/Netgear is only used as the -B argument to
mkdniimg, which is used to set the device: field. In r29434, this was
erroneously changed to be WNDR3700 for all models. The tools to flash
factory images (U-Boot's TFTP server and the factory software's upgrade
utility) may refuse to honor images with incorrect device: fields in their
DNI tags.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29473 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-07 06:55:50 +00:00
juhosg
e310d5b786 ar71xx: fix WNDR3x00 model detection 
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset
56 in the art (caldata) mtd partition.

r29434 redid WNDR3x00 model detection, attempting to distinguish between
WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it
contained a bug: it put the awk inside a $(...), with the result that all
WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch
checks the model name stored in the art partition, as is done by U-Boot
shipping on the WNDR3800. It has the likely advantage of working with
future models based on the WNDR3700 board. It also will not mis-detect
units on which people install more memory.

I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29472 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-07 06:55:39 +00:00
juhosg
9de4cb5314 ramips: fix mac addresses on the DIR-300/600 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29471 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 20:06:08 +00:00
jogo
87cb2a5585 linux: update 3.1 to 3.1.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29470 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 19:50:30 +00:00
jogo
9556c47348 linux: update 3.0 to 3.0.12 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29469 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 19:50:25 +00:00
juhosg
56124f8782 ar71xx: create firmware image for the TL-WR740N/ND v4 boards 
Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29468 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 16:26:44 +00:00
juhosg
a00ddbec78 ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29467 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 16:26:43 +00:00
juhosg
8e71900eeb ar71xx: fix TL-MR3x20 profile names in image/Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29463 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 13:53:21 +00:00
juhosg
05a6361449 ar71xx: cleanup TP-Link profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29461 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 10:29:25 +00:00
juhosg
ae0a750c4b ar71xx: add TP-Link board detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29459 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:11:01 +00:00
juhosg
99997320ea ar71xx: use correct mac on the lan interface on several TP-LINK devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:10:58 +00:00
juhosg
a97fd90341 ar71xx: allow to pass negative offset values for ar71xx_init_mac 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29457 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 21:10:55 +00:00
juhosg
097436bca8 ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29456 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 18:21:15 +00:00
juhosg
f6ab961f67 ar71xx: verify hardware id of firmware images on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29455 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 18:11:51 +00:00
juhosg
6f27fcc4b0 ramips: set mac addresses for the NBG-419N 
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:07 +00:00
juhosg
0a03c64116 ramips: set preinit interface mac on the hw550-3g board 
Based on a patch by Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29453 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:06 +00:00
juhosg
d7a5a32c17 ramips: use ramips_get_mac_* functions in the preinit script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29452 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:04 +00:00
juhosg
e595553be8 ramips: move ramips_get_mac_* functions to lib/ramips.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29451 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:03 +00:00
juhosg
5db41b5518 ramips: add ramips_ prefix to get_mac_{binary,nvram} functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 17:27:02 +00:00
juhosg
8b0e381068 ramips: fix network configuration setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29448 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 16:54:48 +00:00
juhosg
baf6222ae5 ar71xx: reclaim some unused space on TP-Link boards 
With the default OpenWrt configuration, this increases the size
of the rootfs_data partition by 384KB/128KB on the older/newer
TP-Link models.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:36 +00:00
juhosg
35606f14a3 ar71xx: check squashfs signature in TP-Link mtd parser 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:33 +00:00
juhosg
7b716ce3ec ar71xx: use the lzma-loader on TP-Link boards w/o lzma support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29444 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:28 +00:00
juhosg
057c5990c9 ar71xx: add lzma loader 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29443 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:25 +00:00
nbd
c1679af6b3 ar71xx: add preliminary support for wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:20:51 +00:00
nbd
f684eb2454 ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:20:44 +00:00
juhosg
44a7438217 ar71xx: rewrite WNDR3700/3800 handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 13:03:54 +00:00
jow
62f688b6ec [ar71xx] add some missing wndr3800 base-files definitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29433 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 12:56:21 +00:00
juhosg
1f7d4ca407 ar71xx: change user-space board detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29432 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 12:56:20 +00:00
juhosg
71573bb739 ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29431 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 12:47:53 +00:00
juhosg
974654e8c5 ramips: fix argus board rootfs size 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29422 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-04 15:24:57 +00:00
juhosg
11a837ce02 ar71xx: use the tp-link parser on the tp-link boards 
Also remove static partition maps.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29416 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:31 +00:00
juhosg
17c2fb2fc8 ar71xx: add mtd partition parser for the TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29415 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:27 +00:00
juhosg
37a46ae9f4 ar71xx: run the RedBoot parser only on the RedBoot based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29414 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:25 +00:00
juhosg
23c921bb91 ar71xx: run the MyLoader parser only on the WP543 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29413 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:23 +00:00
juhosg
4dbb6eef31 ar71xx: run the wrt160nl parser only on the WRT160NL board 
Also remove static mtd partition definitions.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29412 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:20 +00:00
juhosg
8c130c871f ar71xx: allow to pass part_probe types to the m25p80 driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29411 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 18:13:18 +00:00
juhosg
4a763a41d3 ar71xx: create initramfs images for the newer TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29410 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:57:23 +00:00
juhosg
3a0d11139d ar71xx: remove swconfig and wpad-mini from custom profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29408 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:33:41 +00:00
juhosg
1a3e21a48d ar71xx: add uboot-envtools to the default package list 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29407 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:33:40 +00:00
juhosg
7d80e1897f ar71xx: reclaim unused space in WNDR3700/3800 images 
Patch by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29406 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:33:38 +00:00
juhosg
f688ec4123 ar71xx: add a profile and build image for the OM2P board 
[juhosg: the name of the final image has been changed to
'openwrt-ar71xx-generic-om2p-squashfs-factory.bin']

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29397 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:49:05 +00:00
juhosg
41d8ed17e0 ar71xx: add support for Ubiquiti AirRouter 
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:49:02 +00:00
juhosg
8d3dba5fca ar71xx: configure default led behavior for the OM2P 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29394 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:59 +00:00
juhosg
216fce04c3 ramips: enable sysupgrade on the RT-N15 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29393 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:58 +00:00
juhosg
a24e101ea6 ramips: wrap long line in platform upgrade script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29392 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:57 +00:00
juhosg
7a1df0165f ramips: add profile for the Asus RT-N15 
This uses previously submitted rtl8366 kernel packages.

[juhosg: The kmod-gpio-dev package has been removed from the package list.]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29391 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:55 +00:00
juhosg
3c681484c2 ramips: setup default network configuration for RT-N15 
Based on a patch by Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29390 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:54 +00:00
juhosg
53a1653b16 ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile 
It is needed by the RT-N15 board.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29389 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:53 +00:00
juhosg
52d2b347d2 ramips: remove default network configuration, and generate that from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29387 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:51 +00:00
juhosg
a0f4e5c8de ramips: use /lib/functions/uci-defaults.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29386 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:48 +00:00
juhosg
2a4fea0542 ar71xx: use /lib/functions/uci-defaults.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29385 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:47 +00:00
juhosg
0c608fa18a ramips: simplify uci-defaults/network script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29383 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:45 +00:00
juhosg
a77cc3e6c0 ramips: setup mac and network interfaces from separate functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29382 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:43 +00:00
juhosg
bee289fa27 ramips: fix Asus RT-N15 board support 
Fix Asus RT-N15 flash partitions and make an image.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29381 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:42 +00:00
juhosg
fc0b7d945e ramips: Sparklan wcr-150gn board fixes 
* Fix partition sizes.
 * Add buttons and leds.
 * Register usb.
 * Remove unnecessary stuff from image Makefile
 * Fix rt2x00 eeprom extract.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29380 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:41 +00:00
juhosg
dbcdc67e0e ramips: fix package name of kmod-input-gpio-buttons 
Based on a patch from Omnima Limited.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29379 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:39 +00:00
juhosg
63abf5ef7d ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29378 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:38 +00:00
juhosg
1fe43c4a68 ramips: setup bc2 mac addresses from the generic network script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29377 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:37 +00:00
juhosg
f9f721e5ba ramips: combine network setup for all boards in one file 
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.

[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29376 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:48:35 +00:00
blogic
cb73b00a8f omap24xx: bump to 3.1.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29349 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-28 12:46:18 +00:00
blogic
e179d6ac25 lantiq: bump to 3.1.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29348 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-28 10:22:58 +00:00
nico
db98388370 targets: fix CONFIG_USB_STORAGE_* inconsistency 
* all options were switched from bool to tristate in 2.6.30
 * add/change/move them to generic, disabled by default
 * remove extinct CONFIG_USB_STORAGE_DPCM dropped in 2.6.29, merged with CONFIG_USB_STORAGE_SDDR09
 * remove extinct CONFIG_USB_STORAGE_SIERRA option in 2.6
 * cleanup ordering

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-25 20:47:44 +00:00
juhosg
e6638f1bd3 ar71xx: modify phy mask of the WP543 board 
This fixes ethernet on newer boards. Based on a patch from #9702.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29328 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:43 +00:00
juhosg
4baa5f5378 ar71xx: fix wndr3800 machine name 
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29326 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:38 +00:00
juhosg
31fef29134 ar71xx: copy atheros initramfs images to the image directory 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29325 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:35 +00:00
juhosg
1427b1d16a ar71xx: specify mtd layout in command line for the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29324 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:32 +00:00
blogic
d60e82238b lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch 
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29294 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-23 12:22:15 +00:00
blogic
bdfc7e8894 lantiq: 
* fixes ath5k eeprom handling
* fixes sx76x
* adds sx76x to userland api
* minor style cleanups

Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29292 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-22 18:50:51 +00:00
florian
9f67405758 [brcm63xx] don't package gpioctl by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29288 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-21 16:36:39 +00:00
nico
90143b9cd2 target/uml: export atomic64_* functions on 32-bit x86 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29287 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-21 14:28:33 +00:00
juhosg
74bada8592 ar71xx: set GE0 phy_mask for AR933x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29274 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-20 11:30:10 +00:00
jow
9ffbe98bd5 [brcm63xx] fix D-Link DSL-2650U image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29266 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-19 21:34:51 +00:00
jogo
fff36017cf linux: update 3.0 to 3.0.9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29264 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-19 18:39:12 +00:00
florian
caca8eaab1 [brcm63xx] build images for D-Link DSL-2650U (#9003) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29238 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-18 10:37:03 +00:00
mb
9460bebd64 omap24xx: Fix cbus nested IRQ acking 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29237 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 22:31:27 +00:00
mb
8a2f3bb99b omap24xx: Fix initialization of software IRQ mask 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29236 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 21:02:00 +00:00
mb
4130c70e12 omap24xx: Update 3.1 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29234 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 19:35:57 +00:00
mb
23c1db706e omap24xx: Some retu/tahvo IRQ fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29233 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 18:06:19 +00:00
mb
fd34842997 omap24xx: Add basic kexec fixes. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29232 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-17 14:57:34 +00:00
mb
53a62e28c0 omap24xx: Add workaround for omapfb locking bug. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29201 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-16 22:34:38 +00:00
mb
5fa3b37006 Revert r29193 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29195 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-16 19:03:23 +00:00
mb
bfa3523244 omap24xx: Set platform specific optimization flags 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29194 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-16 19:02:12 +00:00
mb
fa3d2d4445 n810: Add xmodmap to profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29193 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-16 19:01:19 +00:00
florian
f2c319545c [rdc] include bridge and 8021q modules by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29164 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-15 22:24:22 +00:00
blogic
5df57010b8 lantiq: add runtime generation of /etc/config/network 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29161 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-15 18:21:00 +00:00
blogic
8b1ffd8dab lantiq: fix falcon build breakage 
dev-wifi-rt2x00 fails to build on falcon due to missing pci

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29129 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 18:55:58 +00:00
juhosg
2ba51b8c17 ar71xx: fix USB LED on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29126 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:15 +00:00
juhosg
8f09b983e5 ar71xx: add a function for selecting output signal on a given GPIO pin 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:14 +00:00
juhosg
95684215c0 ar71xx: fix GPIO function handling on AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29124 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:13 +00:00
juhosg
73b96446ee ar71xx: add AR71XX_ prefix to GPIO_REG_* defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29123 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:11 +00:00
juhosg
d9b73ec674 ar71xx: merge nand scan patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29122 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 17:43:10 +00:00
juhosg
b9c4475b88 ar71xx: fix a compiler warning 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 13:07:47 +00:00
juhosg
e8a5cbc660 ar71xx: fix GPIO count for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29109 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 13:07:45 +00:00
juhosg
2f0405019f ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29108 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:53 +00:00
juhosg
c86a746ece ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29107 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:51 +00:00
juhosg
c6f1eddcdf ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29106 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:49 +00:00
juhosg
de73b57f12 ar71xx: add an irq parameter for ar724x_pcibios_init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29105 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 11:49:47 +00:00
juhosg
1937a07a4e ar71xx: remove hardwired interface parameters from mach-* files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29103 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 07:38:09 +00:00
juhosg
2b0cd69920 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 07:38:07 +00:00
juhosg
7f6b8dc9f4 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29101 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-14 07:38:05 +00:00
florian
5c52fb2bb6 [brcm63xx] build images for Pirelli A226M (#10409) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29045 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:22 +00:00
florian
3b6e0584f5 [brcm63xx] register uart0 on DWV-S0 boards (#10409) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29044 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:18 +00:00
florian
6916a71abc [kernel] refresh 3.0 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29043 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:14 +00:00
florian
dee25761b4 [kernel] refresh 2.6.39 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29042 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:10 +00:00
florian
48f5336885 [brcm63xx] rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29041 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 19:19:05 +00:00
florian
209699c72b [rdc] fix typo, load ip17xx switch module 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29039 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 18:41:26 +00:00
juhosg
f0f8408f20 ar71xx: enable has_gbit flag on AR724{0,1} 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29026 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 17:36:36 +00:00
juhosg
5e68925d9a ar71xx: fixup onboard PCIe chip registration on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29022 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 12:48:03 +00:00
juhosg
cf53375340 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29021 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 12:48:01 +00:00
juhosg
3095cc8090 ar71xx: ag71xx: add support for getting switch port link status 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29017 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:04 +00:00
juhosg
7ea3800d31 ar71xx: remove mii_ctrl resources of the ethernet devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29016 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:03 +00:00
juhosg
451654dc3a ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29015 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:01 +00:00
juhosg
749767a552 ar71xx: ag71xx: remove unused mii_cfg related functions and defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29014 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:00 +00:00
juhosg
228681e328 ar71xx: set MII interface speed from the set_speed callbacks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29013 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:59 +00:00
juhosg
7571fae3ab ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data 
Also rename the corresponding callback functions.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29012 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:57 +00:00
juhosg
95d3699b73 ar71xx: ag71xx: remove MII interface setup code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29011 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:56 +00:00
juhosg
13e0098939 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29010 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:54 +00:00
juhosg
4cc612872a ar71xx: fix occasional kernel hangs during boot on AR934x 
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29009 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:52 +00:00
juhosg
5fb5b4483b ar71xx: refresh kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29008 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:26:51 +00:00
jogo
85ec5ce98d linux: update 3.1 to 3.1.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29007 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 10:48:05 +00:00
blogic
e5c40dc4c3 lantiq: add uci-defaults code for handling leds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29004 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:21 +00:00
blogic
bddadbe32b lantiq: add /lib/lantiq.sh and make hotplug handlers use it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29003 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:16 +00:00
blogic
a8be2afd85 lantiq: rename leds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29002 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:12 +00:00
blogic
14ec28a2a3 lantiq: split compat headers out of bsp header patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29001 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:07 +00:00
blogic
98bf7b355b lantiq: adds hotplug handler for loading rt2x00 firmware 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29000 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:40:01 +00:00
blogic
1efd56db6c lantiq: adds hotplug handler for handling buttons and makes w303v work with it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28999 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:39:56 +00:00
blogic
4919aff42f lantiq: cleanup default package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28998 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 23:39:51 +00:00
blogic
2c1120a3b3 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28994 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 18:41:15 +00:00
juhosg
9394e4a065 kernel: ar8216: add support for the AR8236 switch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28993 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 14:09:52 +00:00
juhosg
63898b07cc kernel: ar8216: move port vlan setup into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28992 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 14:09:50 +00:00
juhosg
0999f2be56 ar71xx: use the button for WPS control on the DB120 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28990 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:20 +00:00
juhosg
69a4e7ba6a ar71xx: register the second ethernet interface on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28989 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:19 +00:00
juhosg
f42393b3c6 ar71xx: implement SoC specific phy interface setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28988 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:18 +00:00
juhosg
428566d3de ar71xx: move phy interface setup into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28987 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:50:16 +00:00
juhosg
9c2632e5aa ar71xx: register both MDIO bus on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28986 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:59 +00:00
juhosg
8255c166fd ar71xx: add AR934X specific MDIO registration code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28985 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:56 +00:00
juhosg
79bc01d085 ar71xx: add a secondary mdio bus 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28984 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:54 +00:00
juhosg
4e5c6e94da ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28983 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:50 +00:00
juhosg
f20b056795 ar71xx: add an id argument to ar71xx_add_device_mdio 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28982 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:48 +00:00
juhosg
7d1b33ecbd ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28981 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 12:09:42 +00:00
juhosg
1553f9eabd ar71xx: add AR934x specific USB setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28980 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:20 +00:00
juhosg
5f0b41bae5 ar71xx: register the first ethernet interface on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28979 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:18 +00:00
juhosg
8a3f26299d ar71xx: allow to register ethernet interfaces for AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28978 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:17 +00:00
juhosg
3cd36281d9 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28977 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:16 +00:00
juhosg
a1f5559837 ar71xx: add AR934X specific bootstrap and reset register bits 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28976 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:15 +00:00
juhosg
a3d2129487 ar71xx: add diag support for the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:10 +00:00
juhosg
bb977eb73b ar71xx: fix GPIO direction setup for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28974 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:09 +00:00
juhosg
1d1240855a ar71xx: fix AR934X clock frequency calculation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28973 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:08 +00:00
juhosg
b780360c45 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig 
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28971 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-12 10:54:04 +00:00
blogic
409ee4a226 lantiq: improve falcon package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28962 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-11 21:59:11 +00:00
blogic
79a88f017c lantiq: fix breakage introduced in 3.1 bump 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28961 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-11 21:59:01 +00:00
jow
329ee765ee base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28933 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-10 12:16:41 +00:00
jogo
4ef5b94744 target: linux: mtd: fix MTDREFRESH to an arbitrary high number 
To make the ioctl number "stable", use an arbitrary high number to prevent
conflicts with new mtd ioctls that would push MTDREFRESH's number.

Also make mtd use the in-kernel mtd headers.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28893 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-09 21:16:36 +00:00
nbd
33f4cde7a9 ar71xx: remove dead code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:33:20 +00:00
nbd
4677737b0a ar71xx: on ar7240, exclude ports from their own port vlan destination mask 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:33:15 +00:00
nbd
d212a08b1c kernel: add a top level menuconfig option for enabling lockdep 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:32:57 +00:00
juhosg
e3ad4fdef0 ar71xx: create TL-WA901ND network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28833 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:24 +00:00
juhosg
53b106bac4 ar71xx: create ALL0258N network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28832 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:23 +00:00
juhosg
6827eb6991 ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28831 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:20 +00:00
juhosg
cec23da75a ar71xx: create WZR-HP-G300NH network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28830 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:17 +00:00
juhosg
78fd771952 ar71xx: create RB-493G network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28829 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:12 +00:00
juhosg
27b52397f9 ar71xx: create TL-WR1043ND network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28828 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:11 +00:00
juhosg
97783936b3 ar71xx: create WRT160NL network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28827 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:09 +00:00
juhosg
9a2f4e2196 ar71xx: create PB92 network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28826 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:08 +00:00
juhosg
55fb18f8e1 ar71xx: create DIR-825-B1 network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28825 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:07 +00:00
juhosg
c46cd218f0 ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28824 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:03 +00:00
juhosg
b9aab9ba7e ar71xx: create RB-450 network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28823 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:02 +00:00
juhosg
e1af0acf19 ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28822 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:44:01 +00:00
juhosg
989312537f ar71xx: create RB-433{,U} network config from uci defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28821 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:58 +00:00
juhosg
0c1f9db114 ar71xx: create even more network configs from the uci-defaults script 
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28820 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:56 +00:00
juhosg
08c0787d79 ar71xx: create more network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28819 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:54 +00:00
juhosg
15334c9058 ar71xx: create a bunch of network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
a single ethernet interface.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28818 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:52 +00:00
juhosg
7a36f263be ar71xx: create generic network config from an uci-defaults script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28817 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:43:51 +00:00
juhosg
650912aa45 ar71xx: remove AP81 defconfig, it is the same as the generic config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28816 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:34:33 +00:00
juhosg
ebf7a3e2f9 ar71xx: change generated Buffalo firmware versions 
With version 1.76 the upgrade may fail with newer Buffalo firmwares with
a message like this:
"You can not update the firmware because the firmware version is earlier
than 1.82. Please use 1.82 or later version for firmware update."

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28815 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:34:32 +00:00
kaloz
1e643c087d [cns3xxx]: update 3.1 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28814 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:13:13 +00:00
kaloz
5e628c6e90 [generic/3.1]: update arm mach-types 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28813 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:12:26 +00:00
juhosg
03dd4c25f7 ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28812 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 20:25:00 +00:00
juhosg
8c1109a28d ar71xx: wrap long lines in the upgrade script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28811 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 20:24:59 +00:00
juhosg
1823bd18f8 ar71xx: fix WHR-HP-G300N firmware partition offset 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28810 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 20:24:57 +00:00
juhosg
ab5f1e4aa3 ar71xx: add default network configuration for the WHR-HP-GN 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28807 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 13:32:43 +00:00
juhosg
8853be8e17 ar71xx: build image for the Buffalo WHR-HP-GN 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28806 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:11 +00:00
juhosg
266baaf0dd ar71xx: add support for the Buffalo WHR-HP-GN board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28805 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:10 +00:00
juhosg
24f3dbc411 ar71xx: build image for the Buffalo WHR-G301N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28804 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:08 +00:00
juhosg
17990be972 ar71xx: add support for the Buffalo WHR-G301N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:07 +00:00
juhosg
e1c0ad196a ar71xx: fix WHR-HP-G300N image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28802 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:05 +00:00
juhosg
358394e594 ar71xx: enable WHR-HP-G300N support in kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28801 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:04 +00:00
juhosg
29f0664566 ar71xx: fix WHR-HP-G300N MTD partitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28800 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:03 +00:00
mb
3ac117e4b5 omap24xx: Add cbus tahvo locking fix. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28767 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-05 16:10:18 +00:00
mb
9ac8cd7802 omap24xx: Fix n810bm compilation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28766 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-05 16:01:53 +00:00
juhosg
47cebba347 kernel: swconfig: add a missing unlock in error path 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28753 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-04 14:38:31 +00:00
jow
366b2f2c12 add timeserver config to target specific system configs as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28750 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-04 12:53:35 +00:00
nbd
e5fc3fcde5 kernel: merge regression fixes for the netfilter patches to the 3.1 kernel patches (patch by tripolar) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28734 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-03 20:02:31 +00:00
blogic
fd137ce031 lantiq: remove obseleted folder. we use 3.1 now 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28728 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-03 16:33:27 +00:00
blogic
dfffaea839 lantiq: bump to 3.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28721 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-03 15:15:52 +00:00
juhosg
38ba6904bb ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 14:38:12 +00:00
juhosg
fc6e7aeeb6 ar71xx: build image for the TL-WR741ND v4 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28708 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:55 +00:00
juhosg
77da44561c ar71xx: add initial support for the TL-WR741ND v4 board 
The ethernet port LEDs are not working yet.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:52 +00:00
juhosg
2fb031808c ar71xx: add AR933X GMAC register defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:50 +00:00
juhosg
0f535ad261 ar71xx: combine LEDs setup in one file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:49 +00:00
juhosg
0fe49305de ar71xx: unify LED names on Planex boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28703 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:47 +00:00
juhosg
54e69d54d6 ar71xx: unify LED names on Buffalo boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28702 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:46 +00:00
juhosg
46393cef66 ar71xx: unify LED names on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28701 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:44 +00:00
juhosg
11cfb889eb ar71xx/all0258n: sysupgrade support 
U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be
stored in the U-Boot environment.
If the checksums don't match during boot, a failsafe-system is booted instead.
This patch adds a board-specific sysupgrade hack for the all0258n which
calculates and updates the checksums for the U-Boot environment.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28700 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 09:23:32 +00:00
juhosg
52378540af ar71xx/all0258n: add default config 
This adds default network and uboot-env settings for the ALL0258N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28699 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 09:23:31 +00:00
juhosg
be7781d3ef ar71xx: remove default network config of the mzk-w04nu board as well 
It works with the generic config.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28695 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 09:23:25 +00:00
juhosg
1e4e4a0fab ar71xx: remove LED setup of nonexistent interfaces on RB750 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28693 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-31 14:26:56 +00:00
juhosg
c586df7775 ar71xx: remove default network config of the wnr2000 board 
It is the same as the generic configuration.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28692 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-31 14:26:51 +00:00
acinonyx
893d0c6df4 [ramips] rt305x: Create factory image for Fonera 2.0n 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28689 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-31 09:23:44 +00:00
mb
b67bdb0144 omap24xx: Default to linux-3.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28687 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-30 22:42:00 +00:00
mb
e77f6c670d omap24xx: Fix n810 LCD initialization 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28685 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-30 20:31:45 +00:00
mb
bcb479b352 omap24xx: Fix n810 boot 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28683 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-30 18:46:45 +00:00
juhosg
5a382347ed ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value 
Aparently $magic_long was meant here instead of $magic when comparing with
32-bit values.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28678 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-30 13:06:30 +00:00
mb
2691ee027d omap24xx: Refresh 3.1 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28677 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-29 22:52:44 +00:00
mb
9c6027e5b7 omap24xx: Refresh 3.1 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28676 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-29 22:52:07 +00:00
mb
560730403d Fix tusb patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28675 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-29 22:33:59 +00:00
mb
58deaa7240 omap24xx: Fix MUSB compile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28674 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-29 22:26:27 +00:00
mb
80b92379ed omap24xx: Add n800 touchscreen and keypad drivers. 
Thanks to Marat Radchenko.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28673 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-29 20:35:36 +00:00
mb
d63172b5b3 omap24xx: Add 3.1 patchset. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28672 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-29 19:02:50 +00:00
juhosg
e160695e43 ar71xx: fix typos in image/Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28618 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:52 +00:00
juhosg
85713e36cb ar71xx: add initial support for the OpenMesh OM2P board 
Based on a patch by Marek Lindner <marek@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28617 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:51 +00:00
juhosg
8256ef2e81 ar71xx/all0258n: fix partition layout 
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28615 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:47 +00:00
mb
4126b8d697 Update my email address 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28603 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-26 14:54:26 +00:00
nbd
74e424738e x86: disable crashlog, ioremap of RAM does not work properly here 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28599 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-26 11:49:25 +00:00
juhosg
b4979fee64 ar71xx: create image for the WNDR3800 
This adds support for the Netgear WNDR3800, it is almost the same as
the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28597 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-26 06:12:47 +00:00
jow
543e578b89 target: remove CONFIG_IDE_PROC_FS support as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28586 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-25 16:40:06 +00:00
jow
b2448f1cac brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28585 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-25 16:19:52 +00:00
jow
3275a393fc target: globally disable BSD process accounting 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28584 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-25 16:18:36 +00:00
juhosg
ab4232bf2d ramips: Support for NexAira BC2 
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28571 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:36 +00:00
juhosg
b1f6b4ed8f ramips: fix switch-port assignment for HW550-3G 
WAN is on swtich port 0 for Aztech HW550-3G.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28570 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:32 +00:00
juhosg
0f217d1398 ramips: combine led setup for all boards in one file 
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28569 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:31 +00:00
juhosg
165b64f3f8 ar71xx: build image for the Buffalo WHR-HP-G300N 
Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:29 +00:00
juhosg
c01dd82e04 ar71xx: Buffalo WHR-HP-G300N kernel support 
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:26 +00:00
juhosg
0475f34e05 ar71xx: build image for the Allnet ALL0258N board 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28565 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:23 +00:00
juhosg
61504e67d9 ar71xx: add kernel support for the Allnet ALL0258N board 
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28564 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:21 +00:00
juhosg
afc3633a2e ar71xx: don't override CONFIG_FSNOTIFY 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28563 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:18 +00:00
jow
fbebd1e720 [ar71xx] base-files: make sure inittab-console-fixup returns with success (#10275) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:35:43 +00:00
nico
2c88ef6e95 [target] x86: allow VDI & VMDK images for all subtargets (closes: #10255) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28518 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-22 13:09:15 +00:00
jogo
ad05c99253 linux: generic: refresh patches for 3.1-rc10 
Hopefully the last one and identical to final.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28492 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-20 10:32:44 +00:00
jogo
0f7b0ae7de linux: ar71xx: add support for Mikrotik Routerboard RB493G 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28423 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-11 23:05:16 +00:00
jogo
0f944343dd ar71xx: add a workaround for ar8316 not always driving the TA bit to low 
AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit
to low despite returning a valid value. Ignore it and just use the
returned value anyway.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28422 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-11 23:05:13 +00:00
jogo
c57886b49b ar8216: use mdiobus_{read,write} to ensure proper locking 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28421 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-11 23:05:10 +00:00
blogic
eac20bee29 [lantiq] 
* update patches to 3.0
* add basic vr9 support
* backport 3.1 fixes
* backport 3.2 queue (falcon)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28405 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-10 15:13:46 +00:00
jogo
d066413d5d ag71xx: close a race between the phy state machine and link state 
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.

Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28380 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-08 11:37:14 +00:00
jow
aef22c2190 [generic] add IDs for Huawai K3770, K3771, K4510 and K4511 to option driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28376 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-06 18:23:16 +00:00
florian
ca29e2ab07 [malta] add missing kernel config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28363 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-04 09:15:37 +00:00
cshore
fdb6efb1bc Was specifying input-polled-keys and not input-keys-polled as the module name. 
Philip Prindeville - 2011-10-03 03:58:17

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28357 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-03 04:39:54 +00:00
cshore
5024c10301 Add patch for linux-3.0 as well. 
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28356 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-03 03:09:20 +00:00
cshore
18804bfb8b New x86 platform specific symbol needed for 3.1-rc3. 
---
Attaching the correct file this time...

Philip Prindeville - 2011-09-07 07:01:42



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28355 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-03 03:06:29 +00:00
cshore
89735a0b98 A lot of these options get set automatically when Geode is selected. 
Don't make the config more complicated than it needs to be.
Philip Prindeville - 2011-08-29 03:15:27

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28353 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-03 03:02:42 +00:00
florian
b2e1bfb056 [brcm47xx]: add vlan definitions for Siemens SE505v2 
Hi,

this patch adds the correct vlan definitions for the Siemens SE505v2. It
applies to trunk as well as backfire (please apply here too). On
backfire this also patches brcm-2,4, because brcm47xx base-files is just
symlinked to brcm-2.4.

It also fixes two whitespace issues.

Tested with brcm47xx on both trunk and backfire branch and works as
expected.

Signed-off-by: Manuel Munz <freifunk@somakoma.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28336 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-30 12:55:33 +00:00
blogic
50ecf457b7 [lantiq-wdt] 
The enable function was using the global timeout variable for local operations.
This resulted in the value of the global variable being corrupted, thus
breaking the code.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28310 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-26 10:35:51 +00:00
blogic
0928dfa0bb [lantiq] 
* remove obseleted m25p80 patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28309 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-26 09:36:02 +00:00
blogic
8ca48d1b67 [lantiq] 
* rebase 3.0 patches
* fold some fixes into existing patches

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28308 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-26 09:35:02 +00:00
juhosg
8d0d02042c ar71xx: fix MAC addresses on the DIR-825-B1 board 
Patch-by: Lukas Kuna

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28295 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-23 19:56:39 +00:00
juhosg
a46904b68e ar71xx: enable login only on the system console by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28294 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-23 19:56:38 +00:00
acoul
1ec1b71c3c linux/generic: commit an upstream kernel 3.0 patch (fixes busubox-1.19.2 build failure) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28293 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-23 10:00:13 +00:00
juhosg
e6dc3fc7e8 ar71xx: build images for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28279 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:56 +00:00
juhosg
5fdfc7948a ar71xx: add support for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28277 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:53 +00:00
juhosg
8f241d9a09 ar71xx: add AR933x specific USB setup function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28276 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:51 +00:00
juhosg
3a5386be36 ar71xx: add ar71xx_device_reset_rmw helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28275 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:50 +00:00
juhosg
0316b118d0 ar71xx: fix copy&paste bug in WZRHPAG300H profile description 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28274 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:48 +00:00
juhosg
f580569c07 ar71xx: remove 'default [yn]' from machine Kconfig entries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28273 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:47 +00:00
juhosg
5bc57a6b20 ar71xx: sort AR71XX_MACH_* entries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28272 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:45 +00:00
juhosg
53b7e66b1c ar71xx: create image for the TP-Link TL-WR743ND v1 
Same hardware as WR741ND but with PoE support.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28271 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:44 +00:00
juhosg
36b03a3e5b ar71xx: create image for the TP-Link TL-WR740N v3 
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28269 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:40 +00:00
juhosg
a176de7d8d generic: jumbo frames support for rtl8366s 
This patch adds the option to enable jumbo frames on the rtl8366s
switch. This is almost exactly the same as the first patch at
https://dev.openwrt.org/ticket/7977 and it has been requested
in a comment there.

I have tested this and it successfully allows devices on the switch
using jumbo frames to communicate.

Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28267 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:38 +00:00
jow
4dfbceb2d6 [sdk] fix generation for arm platforms 
Based on patch by Roman Yeryomin <roman@advem.lv>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28225 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-13 07:39:14 +00:00
nbd
3c978d1604 ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28213 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-11 17:44:12 +00:00
jow
def4e4e08f [imagebuilder] Various enhancements from Manuel Munz <freifunk@somakoma.de> 
- don't regenerate Package index unless the packagedir changes
	- remove opkg lists from rootfs, saves > 1MB uncompressed
	- don't direct errors on index creation into packagelist


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28205 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-09 17:25:20 +00:00
jow
5e06206a4d [x86] Xen DomU: make sure kernel is gzip compressed, pygrub cannot handle xz 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28197 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-08 22:18:26 +00:00
nbd
8708bcc2d3 ar71xx: do not count normal interrupts as spurious (fixes #10037) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28182 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-06 05:38:23 +00:00
nbd
e81933ed31 ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28173 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-05 18:37:48 +00:00
kaloz
0de9beccaf [cns3xxx]: upgrade testing kernel support to 3.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-04 15:06:05 +00:00
kaloz
80328ab00d [cns3xxx]: cleanup config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28164 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-04 15:02:37 +00:00
kaloz
7f477c2308 [generic/3.1]: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28163 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-04 15:01:56 +00:00
kaloz
a009b6951b [generic/3.1]: add missing symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28162 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-04 15:01:25 +00:00
nbd
f213fdd6f2 brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-29 21:23:51 +00:00
nbd
25d7a6da6c ar71xx: fix ethernet PLL setting on ar7242 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28124 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-29 21:23:46 +00:00
hcg
60c7c03c16 [omap35xx]: Remove subpage align patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28086 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-25 11:49:55 +00:00
hcg
3e6e12295c [omap35xx]: Re-order patches, add nand sub-page alignment 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28084 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-25 10:37:30 +00:00
florian
f4945cfe79 [x86] bump to 2.6.39.4 
Since linux gets developed on x86 more than all other hardware,
hardly makes sense to have our default x86 version be trailing
by over a year.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28082 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-25 09:35:51 +00:00
florian
1d08fd80b1 [x86] update alix2 platform driver 
Add support for Ed Wildgoose's alix platform driver plus my
enhancement to add GPIO soft button support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28081 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-25 09:35:45 +00:00
jogo
345bc95690 kernel: add two missing config symbols for 3.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28080 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-24 11:43:25 +00:00
juhosg
fbf0dc1df6 ramips: rt305x: add support for the ZyXEL NBG-419N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28078 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-22 20:41:49 +00:00
juhosg
b1b7fcb8bd ramips: rt305x: remove unused defines from mach-nw718.c 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28077 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-22 20:41:48 +00:00
juhosg
55a2482132 ramips: sort Makefile entries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28076 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-22 20:41:47 +00:00
juhosg
1be8b8ebcd ramips: sort RAMIPS_MACH_* defines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28075 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-22 20:41:45 +00:00
juhosg
3e6b1ff9dc ramips: fix wireless firmware extraction for wr512-3gn 
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28073 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-22 18:08:45 +00:00
juhosg
04b0603f45 ramips: remove 'default [yn]' keywords from machine Kconfig entries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28054 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-19 15:55:12 +00:00
juhosg
a813bfb92b ramips: rt305x: fix wr512n image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28053 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-19 15:55:11 +00:00
juhosg
2d61da5a90 ramips: rt305x: support for wr512-3gn-like routers 
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28052 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-19 15:55:10 +00:00
juhosg
8aeb045406 ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28051 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-19 15:55:08 +00:00
juhosg
094c8b4e78 ramips: fix wireless on Belkin F5D8235 v2 
Fix wireless firmware extract from flash for Belkin F5D8235 v2.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28050 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-19 15:55:07 +00:00
juhosg
d227d34e1f ramips: fix typo in default packages 
Fix fivebytepypo - there is no such kernel module wpad-mini :)

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28049 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-19 15:55:05 +00:00
hcg
4665caac8d omap35xx: Add 3.0.3 kernel support for Gumstix 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28047 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-19 12:00:08 +00:00
hauke
0f6d21f8f6 kernel: update to version 3.0.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28043 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-18 12:54:12 +00:00
jow
41f0999b88 [brcm47xx] fix the default network configuration for the ASUS WL-330gE (#8751) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28024 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-17 03:16:59 +00:00
hauke
4bf096096c kernel: update kernel to version 2.6.39.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28022 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-16 22:04:10 +00:00
jogo
100f1cd12e kernel: generic: refresh patches for 3.1-rc2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28021 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-16 21:42:15 +00:00
juhosg
36991e8520 ramips: use maccalc instead of hexdump + sed 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28007 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 19:00:23 +00:00
juhosg
f64a3c8610 ramips: rt305x: fix mac addresses on the Netcore NW718 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28006 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 18:55:53 +00:00
juhosg
649cff937e ramips: add maccalc to the default package list 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28005 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 18:55:52 +00:00
juhosg
9822240003 ramips: add input drivers to the default package list 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28003 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 18:55:50 +00:00
juhosg
76a008f572 ramips: rt305x: make config and factory partitions read-only on the ATP-52B 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28002 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 18:55:48 +00:00
juhosg
4a471f8a39 ramips: add uci-defaults scripts to preconfigure USB LEDs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28000 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 14:12:00 +00:00
juhosg
3571551891 ramips: rt305x: add some USB modules to the default profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27999 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 14:11:58 +00:00
juhosg
a6ff6c1f36 ramips: rt305x: add dwc_otg driver 
Based on a patch by Layne Edwards <ledwards@astrumtech.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27997 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 14:11:55 +00:00
juhosg
bf5f735641 ramips: rt305x: register the dwc_otg device on the relevant boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27996 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 14:11:52 +00:00
juhosg
5f106959f5 ramips: rt305x: add dwc_otg platform device 
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27995 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 14:11:51 +00:00
juhosg
8ab9233b7b ramips: sync kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27993 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 14:11:48 +00:00
juhosg
b73e813a88 ramips: load the input drivers during preinit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27992 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 14:11:47 +00:00
juhosg
ef3572bede ramips: add support for Argus ATP-52B 
[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27991 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 14:11:45 +00:00
juhosg
8b59aa7786 ramips: allow to specify port layout for the switch of the RT305x/RT3350 
Based on a patch by Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27990 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 14:11:43 +00:00
juhosg
ce883e3127 generic: ar8216: add support for get link status 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27989 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 14:11:41 +00:00
nbd
f890117582 kernel: disable cfi cmdset 0002 erase suspend 
on some platforms, erase suspend leads to data corruption and lockups when write
ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
simply disable erase suspend, as it will usually not produce any useful gain on
the small filesystems used on embedded hardware.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27984 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-15 00:15:36 +00:00
nbd
db5c8f65ca ar71xx: add some code to detect DMA stuck conditions on ar7240 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-13 22:30:14 +00:00
nbd
5051a6677f ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27973 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-13 21:49:46 +00:00
hauke
b684163141 brcm47xx: fix flash detection on chipcommon less devices. 
This closes #9906
Thank you for the report Kim


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27967 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-12 16:37:22 +00:00
nbd
80bda1f3e5 initramfs: allow preinit to enable switching from initramfs to tmpfs to allow overlayfs to be mounted on top of it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27960 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-11 20:32:57 +00:00
nbd
65dea0f0b1 ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27959 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-11 13:52:40 +00:00
florian
a91dd7628b [ep93xx] package more board specific modules: 
- keyboard matrix driver
- SoC sound support

based on patch by KanjiMonster

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27957 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-11 11:18:44 +00:00
florian
2084beb89a [kernel] add more missing touchscren symbols (3.0+) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-11 11:18:41 +00:00
florian
66ca64dd8b [realview] disable hardware perf support to work in qemu 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27955 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-11 11:18:37 +00:00
hauke
88288cdd8a kernel: revert r27953 
KanjiMonster did the right patch, I was just confused because of linux-3.0 and linux-2.6.30


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27954 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-11 09:54:02 +00:00
hauke
494bc2d399 kernel: fix ocf patch for kernel 2.6.30 
find_task_by_vpid is already exported by the kernel without any patches needed.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27953 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-11 09:47:36 +00:00
jogo
f574e02f6c kernel: 2.6.30: remove bogus additional find_task_by_vpid export from OCF 
find_task_by_vpid is already exported, thus breaking builds.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27952 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-11 09:46:30 +00:00
jogo
8e38afe0f0 ar71xx: make ehci patch apply again 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27951 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-10 23:02:56 +00:00
nbd
733ef74e71 ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h images (#9918) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27950 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-10 22:24:56 +00:00
florian
cce9a35355 [brcm63xx] fix ehci build on 3.0+ 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27946 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-10 11:37:25 +00:00
florian
c3e75d5014 [kernel] add ignore_oc in struct ehci_hcd 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27945 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-10 11:37:21 +00:00
florian
d3bd4c6457 [uml] update to 3.0.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27943 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-09 13:13:22 +00:00
florian
d5fae80121 [kernel] add CONFIG_EARLY_PRINTK 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27942 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-09 13:13:16 +00:00
jogo
4282cc86e6 bcm63xx: add support for linux 3.1-rc1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27941 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-09 12:19:49 +00:00
jogo
b460d9e23f linux: generic: add support for 3.1-rc1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27940 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-09 12:19:43 +00:00
cshore
41845878f3 Add packages that will be relant as "There's a new Alix platform driver hitting linux-next upstream. Get ready for it in 2.6.39.4 and 3.0. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>"

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27929 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-08 02:33:18 +00:00
nbd
3184365fbb kernel: fix another typo in the netfilter optimization patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27927 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-07 21:17:18 +00:00
hauke
f20076467a kernel: add missing option 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27925 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-06 16:46:04 +00:00
nbd
8b822f6071 kernel: add missing checks in the netfilter optimization patch which broke some rules containing only source/destination address checks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27923 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-06 12:39:31 +00:00
hauke
e7f46930ad uml: add some missing options 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27921 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-06 11:23:45 +00:00
hauke
812af8f7b1 kernel: add some missing config options 
These options where found by buildbot


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27920 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-06 10:41:15 +00:00
hauke
57411a3935 kernel: update to kernel version 3.0.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27918 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-06 09:51:55 +00:00
florian
2b3220f388 [malta] update to kernel 3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27912 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-05 13:48:42 +00:00
florian
a9f0a9191c [kernel] add more missing config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27911 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-05 13:48:38 +00:00
florian
d3b16a824c [realview] update to kernel 3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27910 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-05 13:48:35 +00:00
florian
8be08aa65d [kernel] add 101-perf_arm_uclibc.patch to 3.0 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27909 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-05 13:48:31 +00:00
florian
5c96e06c25 [kernel] add missing config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27908 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-05 13:48:28 +00:00
juhosg
1cdb033fe9 ar71xx: fix image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27907 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-05 10:31:52 +00:00
hauke
949a6e62b2 brcm47xx: use kernel 3.0 
As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27906 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 20:10:24 +00:00
hauke
bf183aeff8 brcm47xx: update patches 
* this adds sflash support for ssb devices
* the flash is now a platform device
* minor updates



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27902 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 20:04:54 +00:00
juhosg
cc9b5b3507 ar71xx: enable sysupgrade on the AP96 and DB120 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27901 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 19:41:18 +00:00
juhosg
700dd5a8c6 ar71xx: use the same test for AP121 and Zcomax sysupgrade images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27900 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 19:41:17 +00:00
juhosg
45aa4b5327 ar71xx: cleanup image generation Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27899 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 19:41:16 +00:00
nbd
571d12ab3a ar71xx: fix ethernet FIFO state corruption on ar7240 
When starting/stopping DMA sometimes the FIFO state gets corrupted,
leading to wildly fluctuating latencies or packet data corruption.
Fix this by issuing a fast MAC reset as soon as the link is detected
as up. Fixes #9689, #9405

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27896 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 17:36:31 +00:00
nbd
27818ae524 ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop 
When the DMA engine state gets corrupted due to a hardware issues, it
often won't stop rx until a full reset is issued. In that case the hardware
must keep a valid descriptor, otherwise it will write to random places in
system RAM, triggering random crashes. To fix this, keep a dummy descriptor
without a buffer that keeps the DMA engine in a sane state until the reset
is done

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27895 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 17:36:27 +00:00
nbd
3fe5c4149b ar71xx: fix MAC/MDIO reset mask handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27894 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 17:36:23 +00:00
jogo
d34c1068ff [kernel] generic: Add missing config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27887 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-03 23:28:00 +00:00
florian
e6f9e5c2e9 [kernel] remove 8*1-usb_serial_endpoint_size.patch 
This is breaking some devices out there such as Winchiphead CH341 adapters (#9601)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27885 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-03 13:23:21 +00:00
florian
c600b8c141 [brcm63xx] add support for BCM6345 Ethernet DMA engine 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27881 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-02 18:55:55 +00:00
florian
e386996557 [brcm63xx] improve BCM6345 support 
- runtime detect the amount of memory available
- define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks
- fix GPIO control

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27880 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-02 18:55:46 +00:00
florian
6c0f1d3157 [kernel] refresh 3.0 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27879 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-02 18:55:38 +00:00
nbd
8fb4b275c2 ar71xx: add some hacks to work around the misalignment in IP packets received on AR71xx and AR91xx ethernet MACs 
decreases CPU load with the default firewall for routing 95 mbit/s from 78% to 55%

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27878 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-02 15:12:08 +00:00
florian
5dd458beea [rdc] fix r6040 multicast patch, thanks 
nicolas le falher

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27876 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-02 14:13:00 +00:00
jogo
aad169e573 linux/generic: remove obsolete kernel options from 3.0 
Also fix one typo.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27875 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-02 09:58:16 +00:00
jogo
2120753685 kernel: Fix firewire for 2.6.37+ 
The old ieee1394 stack was removed in 2.6.37. The new firewire stack is
available for all kernel versions, but experimental for the older one, so
make both available where appropriate.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27874 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-02 09:53:19 +00:00
nbd
6bca9273dd imagebuilder: clean opkg files if requested (patch from #9866) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27872 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-01 23:58:11 +00:00
nbd
8636d9b4a4 kernel: enable inotify by default (#8055) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27853 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-31 18:12:23 +00:00
nbd
aafcea0542 kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27840 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-30 15:39:52 +00:00
kaloz
50841b8f24 [ppc40x]: upgrade to 3.0 (magicbox ata and openrb usb is broken, but the current kernel didn't compile at all, so...) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27826 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-29 10:16:48 +00:00
jogo
e5839cb102 ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH 
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27814 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 11:57:51 +00:00
juhosg
ea7f49d513 ramips: rt305x: add support for the Netcore NW718 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27813 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 10:56:32 +00:00
juhosg
793574f571 ramips: rt305x: add support for the Asus RT-G32 B1 board 
Based on a patch by: Sergiy <piratfm@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27812 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 10:56:30 +00:00
juhosg
23e474a920 ramips: rt305x: enable M25P80 driver 
Based on a patch by Sergiy <piratfm@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27811 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 10:56:28 +00:00
juhosg
1e8820b752 ramips: rt305x: introduce rt305x_register_spi helper 
Based on a patch by Sergiy <piratfm@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27810 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 10:56:27 +00:00
juhosg
501b3f6109 ramips: add SPI controller driver 
Based on a patch by Sergiy <piratfm@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27809 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 10:56:25 +00:00
juhosg
2ba08ae27e ramips: rt305x: add support for the DIR-600 B1,B2 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27808 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 10:56:24 +00:00
juhosg
ce72e8dfb5 ramips: rt305x: change machine id for DIR-300 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27807 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 10:56:22 +00:00
juhosg
8583804fdd ramips: rt305x: rename LEDs on the DIR-300-B1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27806 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 10:56:21 +00:00
juhosg
f8afb5e291 ramips: rt305x: sort Kconfig/Makefile entries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27805 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 10:56:19 +00:00
juhosg
4a7f515821 ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards 
This change corrects expected CPU name of Ralink RT3050, which
describes itself as RT3350 (this name is ripped off chip and elevated
to user space via /proc/cpuinfo.)
This patch fixes wired network on DIR-300 rev B and DIR-600 rev B

Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27804 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 10:56:18 +00:00
juhosg
53c9a5ce63 ramips: fix PWH2004 image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 10:56:15 +00:00
jogo
6c853478d6 swconfig: Add generic switch identifiers 
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27800 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-27 18:00:18 +00:00
nbd
402fac7b0d x86/alix2: include WAN interface by default 
Include WAN interface by default, instead of putting both ports in the LAN bridge.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27787 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-26 16:37:48 +00:00
nbd
9c300cefad x86/alix2: fix typo in target makefile 
Cut and paste cruft from borrowing from Geos platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27786 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-26 16:37:44 +00:00
hauke
b47797b83c x86: add missing config symbols 
This adds some config symbols for kernel 3.0. 

Thank you realopty for the patch.

This is from #9719.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27775 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-25 21:21:01 +00:00
jogo
d983336e06 bcm63xx: Fix SPI commands and register offsets for BCM6348 
In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that.
It also fixes some spi commands for all bcm63xx.

Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27774 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-25 19:52:47 +00:00
kaloz
1f784af870 add missing symbols for generic and x86 on 3.0, based on Philip Prindeville's patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27762 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 22:04:08 +00:00
jow
3fb6c82409 From: George Kashperko <george@znau.edu.ua> 
Issue map read after Write Buffer Load command to ensure chip is ready
to receive data.
Signed-off-by: George Kashperko <george@znau.edu.ua>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27760 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 15:37:00 +00:00
jow
e0f1f9a076 [generic] refresh 501-yaffs_cvs_2009_04_24.patch for Linux 3.0 final 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27759 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 15:36:33 +00:00
hauke
e7b2bb9b51 brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci 
ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but
this causes a data bus error (oops) on a SoC.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27758 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 15:18:29 +00:00
nbd
005e21d6ac ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27756 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 14:40:35 +00:00
nbd
a35f636e77 rtl8366_smi: implement a function for detecting whether the attached switch is RTL8366S or RTL8366RB 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27755 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 14:40:31 +00:00
nbd
de95026813 rtl8366: unify rtl8366s and rtl8366rb platform data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27754 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 14:40:23 +00:00
hauke
32dec7075a ocf-linux: version bump to 20110720 
Fixes problem with TFM allocation in cryptosoft.c


Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

Hauke:
 * remove ubsec_ssb package and take it from ocf-linux
 * use patches from ocf-linux package
 * refresh all patches
 * readd some build fixes for OpenWrt.
 * readd CRYPTO_MANAGER dependency


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27753 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 14:17:58 +00:00
nbd
59f4d1091d x86: 2.6.39 requires additional symbol 
Sysfs support for DMI BIOS was added in 2.6.39.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27749 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 09:41:07 +00:00
nbd
79860ef18f atheros: fix mii phy read/write ioctl 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27747 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 09:11:10 +00:00
nbd
b9f3675439 geos: include pppstats and pppdump in default packaging 
As the Geos box includes an ADSL modem that's targeted towards PPPoE, PPPoA, and bridged utilization, including these useful tools allows for easier configuration and troubleshooting.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27743 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 08:41:58 +00:00
nbd
c9e45803ce ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27739 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-24 08:02:20 +00:00
kaloz
2bff5d1962 [ppc44x]: upgrade to 3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27738 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-23 20:44:08 +00:00
kaloz
670f7774c1 [orion]: upgrade to 3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27737 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-23 20:43:53 +00:00
kaloz
ab55d005ac [generic]: 3.0 is out 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27736 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-23 20:42:58 +00:00
hauke
b6c46c6358 brcm47xx: build bcma into the kernel 
Now we can assume that every brcm47xx kernel has the bcma module build
into the kernel. This is not needed for this version as this does not
support bcma as system bus but kernel 3.0 will.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27733 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-23 11:19:58 +00:00
hauke
297e15bc70 kernel: update bcma and ssb to version master-2011-07-22 from wireless-testing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27731 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-23 11:17:00 +00:00
hauke
537f6d3b0f brcm47xx: remove old kernel versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27724 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-22 18:41:24 +00:00
hauke
31a40f97ef brcm47xx: update bcma and ssb to master-2011-07-21 
* add new patches for bcm4716 SoC
* add support for serial flash on bcma bus


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27723 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-22 16:30:42 +00:00
hauke
13a779d3f3 kernel: update to linux-3.0 and refresh patches. 
Thank you Peter Wagner for the patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27722 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-22 16:04:25 +00:00
nbd
3bad82d2e7 ar71xx: reinitialize global switch settings after reset on ar7240 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 14:39:47 +00:00
nbd
340551c062 ar71xx: configure address aging on ar7240 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27704 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 14:39:42 +00:00
nbd
8ea4f149b0 ar71xx: reset the phy in the ethernet init on ar724x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27703 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 12:04:34 +00:00
nbd
96c14099ce ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27702 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 12:04:29 +00:00
nbd
9dfcd7e5e2 ar71xx: increase the delay after the ethernet MAC reset 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27701 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 12:04:25 +00:00
nbd
db4cd49d62 ar71xx: fix an unused variable warning 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27700 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 12:04:20 +00:00
blogic
8781ae1fa3 sync default kernel config for lantiq danube/ar9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27697 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-19 18:08:09 +00:00
blogic
ec935c592f fix etehrnet when using EPHY on lantiq ASE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27696 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-19 18:06:52 +00:00
blogic
2d3d3c4f6e fixes pci on lantiq AR9 SoC 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27695 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-19 18:06:42 +00:00
blogic
5aa1413d89 add support for more lantiq AR9 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27694 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-19 18:06:33 +00:00
nbd
104f21b348 kernel: backport and enable tmpfs xattr support for 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27691 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-19 09:00:55 +00:00
blogic
4b388ef792 [lantiq] 
* fix external interrupts

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27687 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-18 16:27:11 +00:00
blogic
b43c756e4c [lantiq] 
* add gigasx76x update
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27665 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-17 19:27:44 +00:00
florian
96e2c85b97 [ar7] add additionnal debug symbols when kernel debugging is enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27637 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-17 12:30:04 +00:00
florian
9ee9f66b5f [brcm63xx] add ehci support to DWV-S0 board (#9059) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27622 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-16 08:39:04 +00:00
florian
e43c771244 [brcm63xx] fix GEN_SPI_RSET_BASE macro (#9697) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27604 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-13 09:33:11 +00:00
kaloz
7c0785c307 [generic]: upgrade to 3.0-rc7 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27600 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-12 13:44:16 +00:00
kaloz
dc2c30ab96 [orion]: upgrade to 3.0-rc6 and optimize for armv5te again 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27592 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-11 20:35:16 +00:00
nbd
ec8e57edd9 ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-09 06:30:13 +00:00
nbd
cc32100390 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-09 06:29:46 +00:00
kaloz
959037c889 [cns3xxx/3.0]: use the new upstream l2cache and wdt code, smaller changes, refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27558 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-08 09:41:07 +00:00
kaloz
53512ff331 [generic/3.0]: add mpcore_wdt fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-08 09:33:13 +00:00
blogic
3bc6f3a20f fix generation of falcon images for profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 20:20:51 +00:00
blogic
50f83cd332 adds 2 ASC related patches to lantiq 
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 20:20:46 +00:00
blogic
76628e7f3f fix up falcon kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27542 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 18:20:56 +00:00
blogic
096b823d77 fix i2c-falcon kmod package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 18:20:51 +00:00
blogic
43ab5eea8e replace all references to xway with danube 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27538 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 18:20:37 +00:00
blogic
d8b94e0eba fix lantiq image makefile to represent new split between ar9 and danube 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27537 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 18:20:31 +00:00
blogic
f79f43253c add ar9 specific profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27536 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 18:20:27 +00:00
blogic
e59bcdde3e rename xway profile to danube and remove ar9 specifics 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 18:20:21 +00:00
blogic
4130b70d43 remove ar9 board from xway profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 18:20:16 +00:00
blogic
c8b7636f71 remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 18:20:07 +00:00
kaloz
145f06f8eb [cns3xxx]: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27528 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 17:18:50 +00:00
kaloz
72a7b90977 [cns3xxx]: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27527 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 17:18:06 +00:00
kaloz
03d352a4dc [cns3xxx]: enable smp support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27526 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 17:17:44 +00:00
kaloz
f03e9c5d7f [cns3xxx]: make smp code more similar to upstream 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 17:17:06 +00:00
kaloz
af0b474c6e [generic/3.0]: 3.0 is at rc6 now 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27524 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 13:30:41 +00:00
juhosg
d3310ebab9 ar71xx: build image for the AP121 boards with 4M of flash 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27523 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 13:01:50 +00:00
juhosg
142740d87d ar71xx: add separate profiles for the AP121 and AP121-MINI boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 13:01:48 +00:00
kaloz
a720db70de [generic/3.0]: add support for and switch to XZ compressed kernels on ARM 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27518 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 10:26:16 +00:00
kaloz
516de0469b [cns3xxx]: select the right cpu 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27517 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 10:24:37 +00:00
florian
10f78687ab [kernel] fix building of perf for arm on uclibc 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 09:43:00 +00:00
florian
8d18817441 [realview] enable support for perf events 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27512 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 09:42:53 +00:00
florian
c832b9012a [malta] enable perf counter support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27511 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 09:42:50 +00:00
cshore
59e4e4f311 [ar7] base-files: diag.sh: added failsafe led definition 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27502 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 03:09:20 +00:00
blogic
a408b75fba [lantiq] get ready for 3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27496 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 17:27:17 +00:00
juhosg
90433b3461 ramips: fix buffalo image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27495 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 16:46:33 +00:00
kaloz
4d759b723b [ixp4xx]: add 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27493 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 13:03:38 +00:00
kaloz
882adee49e refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27492 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 12:57:51 +00:00
kaloz
23fde26a5c [generic]: fixup mtd refresh and co. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27491 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 12:55:21 +00:00
kaloz
146c7d6f10 [generic/3.0]: fix myloader patch, thanks KanjiMonster 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27490 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 12:48:17 +00:00
blogic
bf7b45f818 fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27489 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 10:36:56 +00:00
kaloz
299fdf65d5 [cns3xxx]: we have an up-to-date mach-type file now 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 10:12:50 +00:00
kaloz
b936a9b656 [generic/3.0]: replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27485 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 10:09:15 +00:00
florian
d8a46ca40e [brcm63xx] move board_HW553 inside the ifdef ..BCM6358 .. endif block 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27484 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 10:00:39 +00:00
florian
f98de2585b [kernel] refresh 2.6.39 geode patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27483 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 10:00:05 +00:00
juhosg
b016341cf1 ramips: add diag support for RT-N15 and PWH2004 
Also sort the board names alphabetically.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27478 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 08:05:00 +00:00
juhosg
6451badb13 ramips: use the 'router' LED for diagnostic on the WHR-G300N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27477 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 08:04:55 +00:00
juhosg
eaafa6fa91 ramips: create tftp image for the WHR-G300N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27476 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 08:04:54 +00:00
juhosg
c96ab0c002 ramips: create factory image for the WHR-G300N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27474 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 08:04:52 +00:00
cshore
da0ae64a3e [brcm63xx] Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27471 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 06:35:24 +00:00
cshore
e6ee47fd40 [brcm63xx] profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27470 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-06 06:35:22 +00:00
kaloz
b3f665b919 [generic/3.0]: add some symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27464 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-05 21:19:57 +00:00
florian
bc9fd85f57 [kernel] sched_connmark depends on NF_CONNTRACK_MARK (#8976, #9423) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27457 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-05 12:40:50 +00:00
kaloz
458e5861cd [target/generic/3.0]: add missing symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-05 11:55:31 +00:00
florian
b18307a84f [brcm63xx] hw553: fix missing has_uart0 in board definition (#9533) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27448 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-04 15:04:58 +00:00
juhosg
ff21374f6a ar71xx: fix building of squashfs images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-04 12:10:03 +00:00
blogic
8f9d825f9d set DEFAULT_SUBTARGET for lantiq/ 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27445 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-04 11:21:47 +00:00
blogic
e8f1fadf6c fix broken falcon patches from last night 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27441 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-04 07:50:34 +00:00
juhosg
f3959aee0f ramips: create factory image for DIR-300-B1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27439 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-04 06:48:45 +00:00
nbd
56e7a18c3e ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27434 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-04 03:03:34 +00:00
blogic
e6839c59a8 AT91: flexibity: add system uci file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27413 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 18:55:57 +00:00
blogic
c7f2977365 AT91: Add flexibity board support 
The patch below adds AT91 Flexibity Connect board support.

Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27412 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 18:51:59 +00:00
blogic
2b398e6998 alix2: add/subtract features as needed 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27411 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 17:39:24 +00:00
blogic
0820b56c69 use netif_receive_skb on lantiq 
Signed-off-by: Luca Olivetti <luca@ventoso.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27410 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 17:39:05 +00:00
blogic
b75766abf4 automatic subtarget enumaration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27407 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 17:38:23 +00:00
blogic
dde03ff97a update lantiq/falcon patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27406 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 17:38:11 +00:00
blogic
a6916ee356 fix description for lantiq target 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27405 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 17:37:57 +00:00
juhosg
f2053cb231 ramips: merge 2.6.39 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27399 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:02:10 +00:00
juhosg
e98854a51f ramips: remove 2.6.37 stuff 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27398 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:02:09 +00:00
juhosg
748af8b575 ramips: switch to 2.6.39.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27397 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:02:07 +00:00
juhosg
f7ed0bfe29 ramips: add 2.6.39 support 
Based on the patches from #9625

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27396 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:02:06 +00:00
juhosg
a728a666aa ramips: add hotplug script to extract eeprom for the rt2x00 driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27393 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:02:01 +00:00
juhosg
88b8c44b87 ramips: specify eeprom file name on RT305X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27392 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:02:00 +00:00
juhosg
556577659d ramips: specify eeprom file name on RT288X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27391 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:59 +00:00
juhosg
5f4dbbbf5c generic: add rt2x00_platform.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27390 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:57 +00:00
juhosg
a6e5da490d ramips: add all supported boards to lib/ramips.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27389 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:56 +00:00
juhosg
f9e19ce202 ramips: check the size of the uImage in image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27388 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:55 +00:00
juhosg
cf68680797 ramips: use lowercase partiion names on the WCR150GN board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27387 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:53 +00:00
juhosg
f1d6b8e6a9 ramips: use different partition names in the DIR-300-B1 image 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27386 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:52 +00:00
juhosg
a46ef02052 ramips: force word write on flashes with AMD cmdset (#9252) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27385 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:51 +00:00
juhosg
db3a7e64a2 ramips: update partition map for DIR-300-B1 
Patch by Layne Edwards from #9252.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27384 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:49 +00:00
juhosg
f65d6ac4d9 ramips: consistently use 'firmware' name for sysupgrade partitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27383 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:48 +00:00
juhosg
45b5e79de8 ramips: fix a section mismatch warning 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27382 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:46 +00:00
juhosg
17d001231c ramips: remove unused include from the common GPIO code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27381 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:44 +00:00
juhosg
9589c35dd3 ramips: disable watchdog on sysupgrade 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27380 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:43 +00:00
juhosg
7807b0552e ramips: swap target check in image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27379 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:42 +00:00
juhosg
b1476a05c2 ramips: update HW550-3G mtd partitions 
This patch updates the mtd partitions for the Aztech HW550-3G

Signed-off-by: Layne Edwards <ledwards@astrumtech.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27378 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:41 +00:00
juhosg
d786690857 ramips: set cp0_perfcount_irq for RT305X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27377 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 15:01:40 +00:00
cshore
2f9bb1e3e1 [x86] target/patches: This has been sent upstream, but might not appear for a couple of weeks. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27373 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 03:20:04 +00:00
cshore
db1f43a9a0 [x86] target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27371 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 03:14:53 +00:00
cshore
33241d2031 [x86] Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped." 
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27370 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 03:14:51 +00:00
cshore
9b1189e191 Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27369 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 03:14:48 +00:00
cshore
4887230f5c The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers. 
Include this on Geos.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27368 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-03 02:59:00 +00:00
juhosg
547c706620 ar71xx: use 4k image only for the AP121 board 
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27357 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-02 08:37:59 +00:00
kaloz
0060110094 [cns21xx]: cns21xx belongs to the Econa family, too 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27354 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-02 08:31:25 +00:00
kaloz
d7ba81230a [etrax]: mark it broken 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27349 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-02 07:26:04 +00:00
jow
422a78af7a [ar71xx] revert r27043 (#9513) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27343 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 19:52:57 +00:00
jow
c3c5977bfa [ar71xx] revert r27341, it introduce wrong behaviour for other models 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27342 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 19:15:45 +00:00
jow
0678f5f577 [ar71xx] turn status LED off if device finished initializing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27341 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 18:39:53 +00:00
kaloz
b76c8ead89 [avr32]: upgrade avr32 u-boot to 2011.06 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27330 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 11:32:01 +00:00
kaloz
43b45fe5d9 [avr32]: upgrade to 2.6.39.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27329 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 11:31:08 +00:00
kaloz
5bdb3e2cb7 [cns3xxx]: preliminary 3.0 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27328 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 08:15:48 +00:00
kaloz
7437ee4707 [target/generic/3.0]: add missing kernel symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27327 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 08:11:16 +00:00
nbd
ce9cff2576 fix the gpio_dev driver: remove existing forward port patches, use unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27322 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-01 03:20:13 +00:00
juhosg
14ca52f672 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code 
The config option has been removed in 2.6.39.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27320 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-30 12:15:33 +00:00
hauke
0cca467832 brcm47xx: deactivate wndr3400 for now as this device will not boot 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27316 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 17:42:34 +00:00
juhosg
5c047f9906 ar71xx: merge 2.6.39 patches 
Also remove the old UART driver for ar933x.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27314 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:37 +00:00
juhosg
e70980e097 ar71xx: remove 2.6.37 support as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27313 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:36 +00:00
juhosg
d9b5b92778 ar71xx: remove 2.6.38 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27312 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:34 +00:00
juhosg
1c570d4d17 ar71xx: switch to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27311 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:33 +00:00
juhosg
da1bd2aad6 ar71xx: add 2.6.39 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27310 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:32 +00:00
juhosg
48cf86296e ar71xx: remove ar71xx_gpio_irq_set_type 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27309 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:30 +00:00
juhosg
47d06a3f16 ar71xx: add separate handlers for IP3 interrupts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27308 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:29 +00:00
juhosg
32852643ef ar71xx: use separate handlers for IP2 interrupts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27307 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:28 +00:00
juhosg
62be67eb01 ar71xx: remove useless irq_desc.status initializations 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27306 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:27 +00:00
juhosg
f9ffd498e1 generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27305 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:25 +00:00
hauke
ff1834fac5 brcm47xx: generate image to flash on Netgear WNDR3400. 
The image will not boot because serial flash support is missing this is only for experts.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27302 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 22:23:21 +00:00
hauke
6c4398bc6a brcm47xx: add initial support for devices with bcma bus. 
Ethernet and wifi are not working and this is highly experimental.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27301 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 22:21:57 +00:00
hauke
a89d3f1a9b kernel: refresh patches for kernel 3.0-rc5 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27300 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 20:25:39 +00:00
hauke
6936562161 kernel: update ssb and bcma to linux-next next-20110628 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27299 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 19:33:50 +00:00
hauke
e2e4e12a9a kernel: update kernel to 2.6.39.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27298 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 19:30:58 +00:00
kaloz
62588ba2fa [cns3xxx]: ethernet cleanup and sata fix - thanks, Chris 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27297 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 06:54:20 +00:00
hauke
d44b8ff5e3 brcm47xx: update kernel to version 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27296 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 21:29:20 +00:00
hauke
7072b1e240 kernel: update ssb and bcma to linux-next next-20110627 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27295 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 21:28:40 +00:00
hauke
951d6d8330 brcm47xx: fix Linux-3.0 and fix clock rate detection. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27294 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 20:20:11 +00:00
hauke
85dd88a3c6 kernel: update ssb and bcma to linux-next next-20110627 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27293 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 20:18:49 +00:00
jow
697cd0b667 [geos] remove remaining uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27291 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 01:42:31 +00:00
florian
42b043fcf4 [x86] geos: deprecate uci-defaults files 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27287 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 22:05:10 +00:00
florian
8138343d87 [x86] alix2: add config files for bridging 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27286 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 22:05:05 +00:00
florian
4fa8e1979c [brcm63xx] remove gpiodev, prefer sysfs gpio 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27284 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 19:26:17 +00:00
nbd
e00ba06f78 ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27283 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 13:54:42 +00:00
nbd
40ad0e2ed9 ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27282 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 13:48:47 +00:00
florian
f0aa035693 [kernel] add missing linux-3.0 config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27269 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-24 11:43:30 +00:00
florian
cf43489095 [brcm63xx] register SSB sprom after ethernet devices 
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27258 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-22 12:32:03 +00:00
florian
80db4b51be [brcm63xx] fix tab damage in 141-led_count.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27254 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-21 20:52:58 +00:00
florian
07d9a1e199 [kernel] fix and make usable kmod-pcmcia-rsrc 
This module is also needed for e.g: kmod-bcm63xx-pcmcia

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27253 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-21 20:52:53 +00:00
hauke
b40c3fc29b kernel: refresh patches for kernel 3.0-rc4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27247 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-21 18:39:47 +00:00
florian
7954e2cc55 [brcm63xx] use macros to generate SPI registers table and switches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27246 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-21 10:05:51 +00:00
florian
d60ce1b40f [adm5120] fix usb mis-cleanup after r27162 (#9581) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27243 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-20 10:04:53 +00:00
jow
673103854c [x86] Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com> 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27241 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 23:05:21 +00:00
jow
7733d536b3 [PATCH] generic: Remove IPv6 depependency of bridge in 2.6.38+ 
Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is
enabled. Since the IPv6 module isn't exactly lightweight and bridge also
only needs a single function from IPv6, it's rather easy to create a
common "lib" module with a RCU pointer to the actual implementation, if
the IPv6 module is loaded (although slightly hackish).

The codepath seems to be only taken when using IPv6, so there should be
no negative side effects when IPv6 isn't loaded. I did not measure how
big the performance impact is.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27237 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 22:48:53 +00:00
florian
e13c1d256f [brcm63xx] dev-spi.c checks for running CPU, not board code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27236 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:46:00 +00:00
florian
be166690fa [brcm63xx] fixup patches after r27234 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27235 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:28:38 +00:00
florian
64c718f223 [brcm63xx] remove accidental bcm6345 related patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27234 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:16:59 +00:00
florian
ea57f00705 [brcm63xx] remove support for 2.6.37 and 2.6.38 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27233 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:14:22 +00:00
florian
df49c5b247 [brcm63xx] switch to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27232 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:12:45 +00:00
florian
2303389688 [cobalt] remove 2.6.35 and 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27230 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:09:40 +00:00
florian
900fe1bcc1 [ep93xx] remove pre 2.6.39 patches and config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27229 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:09:00 +00:00
florian
811d545260 [au1000] remove 2.6.37 patches and config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27228 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:07:26 +00:00
juhosg
8738d0666a ar71xx: cleanup AR933X UART driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27222 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 13:17:51 +00:00
juhosg
4a96046040 ar71xx: fix uart clock frequency for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27221 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 13:17:50 +00:00
hauke
e8526fc8bf brcm47xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27219 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-18 15:53:14 +00:00
hauke
2c1ed14849 kernel: update to kernel 2.6.38.8 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27218 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-18 15:52:15 +00:00
hauke
86a107e544 brcm47xx: add support for kernel 3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27217 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-18 15:24:44 +00:00
rwhitby
90632ae8aa ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27202 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-17 11:22:22 +00:00
florian
d440b026f6 [kernel] add missing USBIP_CORE item in config-3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27195 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-16 14:34:50 +00:00
florian
632a38eb50 [malta] allow any console to be used 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27193 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-16 14:34:44 +00:00
florian
bba43a8dab bcm63xx: Add support for Linux 3.0-rc3 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27192 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-16 14:34:40 +00:00
hauke
ed6be451a0 linux/generic: Add support for 3.0-rc3 
Also make linux identify itself properly as 3.0, not 3.0.0.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27191 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 21:31:01 +00:00
hauke
5d3c534673 bcm47xx: Remove kernel checks from image Makefile 
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27185 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 21:11:49 +00:00
jow
886975b7e5 [PATCH] 2.6.39.1: missing kernel symbols 
If you turn on I2C, you'll need this symbol defined.

Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27182 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 18:18:32 +00:00
nbd
9ec7437e17 add missing kernel config symbols for usb on powerpc 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27181 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 18:07:26 +00:00
jow
0d5a874445 [generic] backport upstream Kernel commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 (netfilter: IPv6: fix DSCP mangle code) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27179 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 14:11:33 +00:00
jow
fb3339fc0d [generic] revert r26997, it does not apply against 2.6.36.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27178 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 13:51:57 +00:00
florian
72829489da [cobalt] switch to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27175 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-14 20:05:13 +00:00
florian
d78f71b371 [cobalt] fix diag.sh with qube2 front led 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27174 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-14 20:05:09 +00:00
florian
6f5d1f2104 [cobalt] resync kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27173 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-14 20:05:03 +00:00
blogic
00cb032d3c [lantiq] 
Fix for bug where the iniatialisation of the MAC data private strucure
is copied into the wrong location.

Ticket #9547

Signed-off-by: Conor O'Gorman <conor at dna.ie>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27172 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 22:37:23 +00:00
florian
d7f70f01a8 [uml] replace unfortify patch with a better one 
Thanks to Richard Weinberger for providing this patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27168 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 12:45:12 +00:00
juhosg
63dccaf23b ar71xx: use ar933x_uart.h in the AR933X serial driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27166 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 08:12:40 +00:00
juhosg
83e2548ec8 ar71xx: update early_printk code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 08:12:38 +00:00
florian
27e94101de [adm5120] cleanup files using checkpatch.pl 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27162 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-12 19:17:57 +00:00
blogic
5151e90913 [lantiq] 
* move patches around
* add basic support for gigaset sx76x


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27158 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-12 08:56:26 +00:00
acinonyx
3f2561bdea [ar71xx] Remove trailing spaces, convert spaces to tabs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27153 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-09 19:30:50 +00:00
blogic
eb72b14048 [ledtrig-netdev] 
we dont need 1024 bytes buffer. 128  bytes is enough.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27143 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-09 07:08:54 +00:00
blogic
a9c1e1b2b5 [atheros] 
* revert accidental config change


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27142 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-09 05:10:18 +00:00
blogic
0814097081 [lantiq] 
* fixes spi flash for ar9
* adds limited support for netgear dgn3500 (enough for others to start working with)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27137 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-08 17:57:55 +00:00
nbd
a6c1bd4558 ar71xx: override inittab to enable login on ttyATH0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27128 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-07 17:07:10 +00:00
florian
b5a33bb5d5 [ep93xx] update to 2.6.39.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27114 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:27:14 +00:00
florian
29ba1eadaa [ep93xx] define UIMAGE for various rootfs targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27113 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:27:09 +00:00
florian
44bc580553 [ep93xx] use IMG_PREFIX for image name 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27112 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:27:04 +00:00
florian
81dcbabe94 [kernel] add more config symbols to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27111 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:27:00 +00:00
florian
16a2625fed [uml] update to 2.6.39.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:26:54 +00:00
florian
4680c9125b [realview] update to 2.6.39.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27107 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 13:36:09 +00:00
florian
ca71440af1 [malta] update to 2.6.39.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27106 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 13:36:05 +00:00
florian
51e57076af [kernel] add some missing 2.6.39 config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27105 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 13:36:00 +00:00
florian
e056550af0 [kernel] update to 2.6.39.1 
patch from Peter Wagner

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27104 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 13:35:55 +00:00
juhosg
377e161817 ar71xx: setup wdt_clock for AR913X to avoid a kernel bug 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 12:30:10 +00:00
juhosg
7d535a19ed ar71xx: select the internal antenna by default on the ZCN-1523H boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27101 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 12:30:09 +00:00
florian
4fb824733a [au1000] update to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27090 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-02 13:45:20 +00:00
nbd
480dfda6ec Revert "ar71xx: only enable the rx engine after the link is up..." 
It messes up the DMA state when the link goes down

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27088 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 18:15:43 +00:00
juhosg
3db28f9561 ar71xx: init external_reset for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27083 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:30 +00:00
juhosg
1bab920361 ar71xx: add external_reset field to ath9k_platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27082 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:28 +00:00
juhosg
037092a862 ar71xx: init get_mac_revision on AR9330 rev 1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27081 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:27 +00:00
juhosg
03659f9521 ar71xx: add get_mac_revision to ath9k_platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27080 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:26 +00:00